How to set a view in display mode??

Hi,
I have created a new view in overview page of BT111H_OPPT.
This view is of table type and associated with value node .
I am able to display contents of table on UI but they are in editable mode.
I need them in display mode .
How to achieve this functionlaity??
Any suggestions will be helpful.
thanks
kanika

Hi Kanika,
There are 2 ways:
In the configuration of your view you can set the fields as display mode.
In the method get_i* of your atributtes you can disable the field too.
I think the better solution is using the configuration.
Best regards,
Caíque Escaler

Similar Messages

How to Set Assignment block in Display mode

Hi All,
I have a Z assignment block in Account (BP_Head), requirement to set this assignment block in display mode only.
No user allowed to edit its edit list.
Could you help me how to do that with sample code and event.

HI,
In configTable set attribute displayMode = "TRUE". Then this AB will be always in display mode
displayMode            = "TRUE" or
if you ar using configCelleator uyou need to give iv_all_rows_editable = space
cl_thtmlb_util=>translate_selection_mode(
exporting
iv_selection_mode    = ITEMS->SELECTION_MODE
iv_all_rows_editable = space
importing
ev_selection_mode   = lv_cellerator_selectionmode
ev_edit_mode        = lv_cellerator_editmode
ev_selection_column = lv_cellerator_selectioncolumn ).
Regards,
Deepika.

After Effects warning: couldn't set Quicktime video output display mode

After Effects warning: couldn't set Quicktime video output display mode
I'm getting this error when exporting video from after effects. I also get it when the program starts up. I'm using Windows XP. Cannot find anything about a fix anywhere. Does anyone know how to fix this?

Thanks for your reply. I profess ignorance regarding the GDI only mode and have no idea how to access that. Can you give me a little more info on that?
I am using an ATI Radeon HD 3850. I have two monitors on that card, Monitor one is a Trinitron HP 1130 CRT.(set to 1280x1024 16bit) The other is DVI wide screen Ilo 26 inch monitor. (1024x768 at 32 bit)
I have a BlackMagic Design DECKLINK standard definition broadcast card which outputs component video to a sony broadcast Beta deck. 480ix720 standard video.
The machine has a gigabyte motherboard. Intel Core 2 quad cpu 2.66 ghz
2.50 gb ram reported (4gigs installed)
These hasn't been a major issue as I can still output AVI uncompressed but it is annoying.
John

How to set the view privilege of a portlet?

Dear all,
I would like to ask how to set the view privilege of a portlet (which is located on the Intranet homepage) to only a group of users?
As far as I know, I can create a tab with view privilege to address the about scenario. But is it possible to directly set the view privilege to the portlet ?
thanks
George (HK)
Welcome to my photo albums at http://community.webshots.com/user/GeorgeLee80
Message was edited by:
georgelkh

OK, you got me there George. I don't know where you can set view rights to an out of box portlet. So how about a different approach?
1) Create a blank page with no nav bar or anything else
2) Assign the group you want to see the notifications portlet view rights on the page
3) Make sure the show as portlet check box is checked on the Optional tab in the page properties
4) Add the notifications portlet to the page
5) Ensure the portlet settings are how you desire in terms of what notifications to show and the region settings are how they should be in terms of border, headers, etc
6) Edit the page where you want the notifications portlet to be shown and add the page portlet you just created instead of the notification portlet
This should achieve what you seek without having to dig into out-of-box portlets.
Rgds/Mark M.

How to set default view in Adobe Reader 9?

I am trying to figure out how to set adobe reader so that when you open a document you automatically get the page view on the right side come up and the document in full mode. I have researched registry edits and also the customize wizard with no luck. Does Adobe Reader have the capability to set these as defaults on any document? I have the application setup to remember what I did so if I open the same document it will show pages and be in full mode; however, if I open a new document, I have to select the icon on the left to display pages and then set to full mode. Thanks Joe

Does Adobe Reader have the capability to set these as defaults on any document?
Adobe Acrobat can do this, not Adobe Reader.

How can I change the Video Display Mode when the Monitor displays UNSUPPORTED MODE?

While setting up my new monitor, I changed the computer Video Display mode to 120 Hz by accident. Now I can't see a thing on the monitor other than the words UNSUPPORTED MODE.
My system is a newer HP Pavilion p7-1423W running Windows 8.1 with Intel i5-2320 3ghz
I have tried the Startup mode by tapping ESC on powerup but the startup options don't help. And the F11 option on the menu just makes the Startup screen disapear and returns the monitor to UNSUPPORTED MODE. Tapping F8 doen't work and tapping F12 just puts me into the bios menus which don't help.
How can I put the integrated Video Card back to a supported video mode when I can't see the screen?
This question was solved.
View Solution.

Try the shift key + F8. If you can get in- doing a System Restore to a day before you messed up the setting should work without a need for Safe Mode.
http://www.avira.com/en/support-for-home-knowledgebase-detail/kbid/1672
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

How to set default view for preview?

Every time I open a PDF using Preview I have to set the view to 'thumbnails', then 'two pages up', then adjust the zoom. Complete waste of time.
Anyone know how to set defaults so that it opens in a predictable way?
thanks,

I customized my Toolbar to look like the following. Click the middle button that has the 1 circled. That tells Preview to remember to display pages at actual size (100%). Every file that I open now displays at 100%.

Se54 view cluster (display mode)

Hello, I created a view cluster and call it within sm34 transaction.
So, some users need to change that view cluster and some do not need to edit.
But even if I press display button in sm34 I can see Display -> Change icon, How can I make this button invisible.
In general I need to get 2 transaction:
1st -- for editing view cluster
2nd -- for displaying.
Please ask if I expressed my problem not correct.
Thank You

Kernal
I dont know if your problem solved or you still looking solution. What i can think about is you dont need to create any view cluster for display only. You can create views for that with display properties. Or if you need VC then embedd these views there you shouldnot able to edit as these will be only in display mode.
Let me know if you got any other solution.
Regards
Ajay

How to set full-screen page displaying automatically on portal.

one viewset included two views (named topView and detailView)
putting a table control in the detailView,boz of many columns of the table exceed the width of portal screen,which result in the topView is the same width to the detailView.both of the two views exceed out of the full-screen width.but i don't wanna move the topView when i drag scroll horizontal bar control. so i added a ScrollContainer into the detailView,and put the talbe control into it.
the confusoning is :i don't know how to set the the width of the ScrollContainer cotrol , to keep it full-page displaying any time on portal .
u know the IE'Screen resolution setting maybe different ,e,g,:1024786px and 800600px.

HI,
Give the width in % instead of mentioning in pixels.
ie. for full width, give 100%.
Make sure the layout is GridLayout.
Regards
Fahad Hamsa

How to set the view, which has to be shown at runtime?

Hi,
in my application i have more than one view, but at runtime only one of these views has to be shown. I want to decide this via a parameter that I get from the url.
How can i set the right view to be showing at runtime?
I tried it with a StartView which fires the right Outbound Plug in his wdDoInit-Method. This is working fine, but the problem is, that the method OnPlugDefault() of ComponentInterfaceViewController isn't called already at this time. So in the Init-Method of the StartView I don't have the given URL Parameter, so I can't decide which Plug I want to fire. The method OnPlugDefault() is called only after the init-method of the StartView.
Is there any other possibilty to set the view, which has to be shown, at runtime?
Thanks and Best Regards
Katharina

Hi,
One way is you can pass the parameter in the URL , read the parameter and then fire the outbound plug depending upon that.
You can read the parameters as follows
HttpServletRequest request =Task.getCurrentTask()
.getWebContextAdapter()
.getHttpServletRequest();
String[] param1 = request.getParameterValues("<<PARAMETRNAME");
if(param1.equals("VALUE"))
fire outbound plug1;
Regards, Anilkumar

Creation of Purchase order - set net price in display mode

Hello,
During the creation of purchase order from contract or DA (ME21N-ME59N), I want to set the net price in display mode (under any conditions) .
Is there a parameter setting or a point of modification to make ithis?
Thanks for your contribution.
JLC

Check for existing screen layout name from below settings -
Goto SPRO -> IMG Settings -> Materials Management -> Purchasing -> Purchase Order -> Define Document Types
Check for Field selection key against the PO Type.
Then goto below setting -
SPRO -> IMG Settings -> Materials Management -> Purchasing -> Purchase Order -> Define screen layout at document level
Select the screen layout / Field selection key in this setting and modify the field selection group Quantity and price. Make Price and price unit as display only as per your requirement.

How to make a field from display mode to change mode for a perticular tcode

hi all,
my client want to change one field which is in display mode of a material doc in mb02.
Restrictions in some fields in MIGO needs to be changed.
Uploading point in case of issue: While editing the MIGO latter, this field needs to be edited.
Goods recipient in case of receipt: While editing the MIGO latter, this field needs to be edited.

hi thanks for quick replay,
my requirement is, supose i post a material doc through migo in 101 mtype, in item detail, where tab i have given the good reciepitant and unloading point. but while i want to change that material doc in mb02, i saw unloading point is in change mode, but good reciepitant field is in display mode. my client requirement is to change that field. so for change that field, the field should be in change mode, so thats what i want.
i have checked in configuration side, but i didnt get any setting, i think we have to customize that standard screen.
any comments?
regards,
susanta
Edited by: susanta bindhani on Jun 19, 2008 2:18 PM

How to set the View instance and view attribute to lov field ?

Hi
I created lov and textfield programatically.
I want to set the viewattribute and view instance to that items(lovbean, texfieldbean).
How to set programatically?
Thanks in Advance
Awadesh

Hi
Thanks. Its working fine. But now i got some another issue.
after setting, i put simple system.out.println(Pagecontext.getparameter("idoflov"));
But it returns null value.
why. Actully i want to pass this value (according to my requirement).
The view instance and view attribute are setting correctly. But after that i checked means it returns null value .
plz let me know.
Thanks

How to revert back from external display mode to laptop display mode?

Hi, I'm new to this community. I'm not sure if this is where I should be posting my questions. Anyway, I accidentally pressed fn + f2, which switched my laptop into external display mode (I'm pretty sure), and the screen is now very narrow and small. I can't figure out how to switch it back to the laptop display mode. I tried fn + f3, which didn't do anything. I also tried the windows button + p, which wasn't the solution either (I was able to extend my desktop screen, but when I play my Steam games the screen is still very narrow and small). I'm very frustrated because I can't find any answers online. So any information would likely be helpful. Thanks in advance.
OS: Windows 8

Hi BorderingOnChaos,
Fn + F2 is a toggle. You press it again to switch back. If it doesn't work, then something is wrong with your notebook's SCM (system control manager) software or EC (embedded controller) firmware.
In the future, please do two things:
1 - Identify your notebook because the answer may vary depending on model.
2 - This question does not relate to the SteelSeries Engine. The correct place to ask it would be the general "Gaming Notebooks" forum if your MSI notebook is a gaming model. This "SteelSeries Engine" forum is a sub-forum under the "Gaming Notebooks" forum for the purpose of dealing with questions about it---but almost everybody new misses that. The SteelSeries Engine is used to configure keyboard macros and backlighting in MSI gaming notebooks that contain a SteelSeries keyboard as well as accessory devices from SteelSeries like gaming mice and USB headsets.
Kind regards, David

[OT: Windows] How to set Browser View Menu to Thumbnail?

Viewing a folder of jpg's is much nicer if I browse using the;
View Menu >>> Thumbnail mode
Does anyone know how to make LabIEW's File Path Browser assume this mode programatically?
Thank you,
Ben
Message Edited by Ben on 05-29-2008 11:11 AM
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction
Attachments:
Path_Control.PNG ‏275 KB
Preview_Thmbnail_mode.PNG ‏80 KB
Set_Thmbnail_mode.PNG ‏34 KB

Thank you Andrey!
I'll use your link to highlight that request as definate scope creep!
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How to set a view in display mode??

Similar Messages

Maybe you are looking for