Se54 view cluster (display mode)

Hello, I created a view cluster and call it within sm34 transaction.
So, some users need to change that view cluster and some do not need to edit.
But even if I press display button in sm34 I can see Display -> Change icon, How can I make this button invisible.
In general I need to get 2 transaction:
1st -- for editing view cluster
2nd -- for displaying.
Please ask if I expressed my problem not correct.
Thank You

Kernal
I dont know if your problem solved or you still looking solution. What i can think about is you dont need to create any view cluster for display only. You can create views for that with display properties. Or if you need VC then embedd these views there you shouldnot able to edit as these will be only in display mode.
Let me know if you got any other solution.
Regards
Ajay

Similar Messages

How to set a view in display mode??

Hi,
I have created a new view in overview page of BT111H_OPPT.
This view is of table type and associated with value node .
I am able to display contents of table on UI but they are in editable mode.
I need them in display mode .
How to achieve this functionlaity??
Any suggestions will be helpful.
thanks
kanika

Hi Kanika,
There are 2 ways:
In the configuration of your view you can set the fields as display mode.
In the method get_i* of your atributtes you can disable the field too.
I think the better solution is using the configuration.
Best regards,
Caíque Escaler

SE54 - View Cluster maintainence problem

Hello Guys
I'm creating a VC for bunch of tables which is working fine but for one of the table it give me error message when I enter data and save it. Error is:
Please only enter valid values.
Message no. SV530
Diagnosis
You have entered a value which is formally correct, but not allowed in this context.
Table maintenance is working fine when I save directly from the table. Only using VC gives the problem.
Any valuable input will be highly appreciated.
Regards
Ajay

Thanks Sandra
Actually the problem is resolved just after I posted. You are right as it was related to the primeray key/foren key relationship, which was getting generated automatically after I click on 'field dependence' button.
I manually remove the kew relation among tables and it worked fine.
Anyway, your answer is close ot I would say its right. So I'll be awarding you the points.
Regards
Ajay

Make only the new row in a table editable and other rows display mode.

Hiii all,
I am working on the component GSWISET, there is a table view for substitutes, the requirement is to show all the rows in the table view in display mode. Whenever the user clicks the button (Add employee), a search popup triggers and the user selects an employee from that and it will come as a new row in the table view. Here I need to be able to make only the new row editable and all the other rows in display mode.
Could you please suggest a way to achieve this. Thanks for your time..

Hi,
Try with the code below in.htm page
data: lv_displaymode TYPE string.
IF controller->view_group_context->is_view_in_display_mode( controller ) = abap_true.
    lv_displaymode = 'X'.
ELSE.
    lv_displaymode = ' '.
ENDIF.
if lv_displaymode = 'X'.
<chtmlb:tableExtension tableId = "Substitutes"
                       layout = "FIXED" >
<chtmlb:configTable actions               = "<%= controller->gt_button %>"
                      id                    = "Substitutes"
                      onRowSelection        = "select"
                      selectedRowIndex      = "<%= substitutes->SELECTED_INDEX %>"
                      selectedRowIndexTable = "<%= substitutes->SELECTION_TAB %>"
                      table                 = "//Substitutes/Table"
                      width                 = "100%"
                      selectionMode         = "<%= substitutes->selection_mode %>"
                      visibleFirstRow       = "<%= substitutes->VISIBLE_FIRST_ROW_INDEX %>"
                      usage                 = "ASSIGNMENTBLOCK"
                      headerText            = "<%= controller->gv_header_text %>" />
</chtmlb:tableExtension>
else.
<chtmlb:tableExtension tableId = "Substitutes"
                       layout = "FIXED" >
<chtmlb:configTable actions               = "<%= controller->gt_button %>"
                      id                    = "Substitutes"
                      onRowSelection        = "select"
                      selectedRowIndex      = "<%= substitutes->SELECTED_INDEX %>"
                      selectedRowIndexTable = "<%= substitutes->SELECTION_TAB %>"
                      table                 = "//Substitutes/Table"
                      width                 = "100%"
                      selectionMode         = "<%= substitutes->selection_mode %>"
                      allRowsEditable       = "TRUE"
                      visibleFirstRow       = "<%= substitutes->VISIBLE_FIRST_ROW_INDEX %>"
                      usage                 = "EDITLIST"
                      headerText            = "<%= controller->gv_header_text %>" />
</chtmlb:tableExtension>
endif.
Regards,
Gangadhar.S
Edited by: gangadhar rao on Dec 24, 2010 12:49 PM

Display Description from Text table on View Cluster

Hello All,
I have the below requirement for creating a view cluster to maintain customizing data -
V_TAB_1 has been created for table TAB_1. TAB_1has a text table associated with it.
V_TAB_2 has been created for table TAB_2. TAB_2 has a field which has foreign key relationship with the key field of table TAB_1.
I have created view cluster using above views V_TAB_1 and V_TAB_2. Now while maintain the data using view cluster, description is no visible on the UI.
First Level of Data: This maintains the data in table TAB_1 and its text table.
Now, If I select any record and click on the sub node of the view cluster - Following appears
Second Level of Data -
If we look at the data in the second screen shot, description 'Nitesh' is not coming against the reason code '1'. this is highlighted in the second screen shot
I have tried to populated with Events as well. But could not succeed. Any help would be highly appreciated.
Regards,
Nitesh

Hi
I try to see the data of CSKS by SE16 and I can't see the text field (my release is 6.00) but I can see that field by SE16N, so just the situation like yours.
Probably the fields of this table are too much, because SE16 can display the text field of other tables having a text table
Max

Hiding a Maintenance View in a View Cluster

Hello ABAP Experts,
We have a scenario where we would like to hide a maintenance view to an existing view cluster based on condition.
Is it possible via events of a view cluster, where i can hide the view at runtime based on some condition before the view cluster is displayed ?
Is there any way as well, which help achieve this hiding of views ?
For example in the below View Cluster, i would like to hide "Define object links" view from the main view cluster "Define document Types".
Thanks,
Naresh

Hi Naresh,
Yes, you can do it in events of a view cluster, define a subroutine and bounding it to event(02) in SE54,
when you define the subroutine, it will ask you creat a mian program, in this main program, you need 'INCLUDE lsvcmcod'.
Then you can access some standard data, http://help.sap.com/saphelp_nw04/helpdata/en/62/c302c7de8e11d1a5960000e82deaaa/frameset.htm
INCLUDE lsvcmcod.
FORM yourSubroutineName.
DATA: viewname TYPE vclstruc-object,
        error_flag TYPE vcl_flag_type,
viewname = 'ZTEST_VIEW1'.
* PERFORM vcl_set_table_access_for_obj USING    viewname
*                                       CHANGING error_flag.
----> according your condition to change the view.
IF xxx = yyy.
DELETE vcl_struc_tab WHERE object = viewname.
ENDIF.
ENDFORM.
regards,
Archer

Dump while copying the entries in view cluster

Hi Experts,
I am having a scenario where i am getting the dump while copying the entries through the vies cluster.
I have 2 tables CU00 and CU01. CU01 is depended on CU00.
CU00- it is having schema which are defined by the user.(SCHEMA-P,DESC)
CU01- this table is having the different tabs in a tab strip for a each of the user defined schema.(SCHEMA-P,SEQNO-P,TABID)
the data will be as follows
In CU00
          SCHEMA1         first schema
          SCHEMA2         second schema
In CU01
          SCHEMA1         01              TAB1
          SCHEMA1         02              TAB2
          SCHEMA2         01              TAB2
          SCHEMA2         02              TAB3
I maintained above 2 tables in a view cluster by making CU00 is the start point and defined the field dependencies as well.
in the T-code SE54 i tried to copy the existing schema and all its dependencies(means all the dependent entries in the CU01 table also).
when i pressed the SAVE button it is going for the dump by saying due to duplicate entries in the table CU01.
but it should check the consistency and display the error message when i pressed the COPY key.
I am badly struck up here. Please help me on this issue.
thanks in advance.

Hi Gouri,
CU01 and CU00 both are dictionary tables.
What I think is, while copying all the dependencies for a particular schema the system ha to check whether the data can be inserted into the child tables or not. I too dont know whether this can be done or not.
If not, it should display an error message stating that " primary key violation occurs please use different key values..."
thanks for the reply.

How to restrict data from tables in a view cluster

Hi,
I have 5 Z* tables, Company code is the common code in all of these.
I have created a view cluster on these five tables.
My requirement is to viewcluster should display the data of the user's company code.
When i see the data in SE54 it is showing the proper data(i.e data which is related to users company code) for some of the tables.
And displaying all company codes data for some of the tables.
What can be the issue here ?
Do we need to map the data from proper data displaying tables to these tables ? if so How to do that ?
Please help on how i can solve this issue.
Regards,
Sunil Tata.

Here is a small utility that can be used to copy and paste between a table and Excel.
I have been obliged to slice the llb into small chuncks for internet technical issues. Sorry...
CCMessage Edited by chilly charly on 04-02-2005 03:21 PM
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Attachments:
Copy.zip ‏24 KB
Paste.zip ‏22 KB
CopyPaste example.zip ‏11 KB

How to maintain the data in the view cluster

we are doing upgrade, we have one view cluster app_log in this object scwb
and subobjects is swtlo1,02,03 like i have some subobjects in 4.6c we transported the view cluster to ecc6.0 in ecc 6.0 i have object scwb but subobjects doesn't exist how to maintain the subobjects in view cluster.

Definition
A view cluster is a group of maintenance dialogs which are collected in one maintenance unit for business or technical reasons. They allow related data in more than one table/view to be maintained consistently.
Use
Whereas only 1:1 relationships can be processed in maintenance views (except for language-dependent texts), key extensions and relationships of cardinality N:M can also be handled in view clusters. Maintenance dialogs with no key, or partial key-dependence, can also be combined into view clusters.
Grouping dialogs into one maintenance unit has the following advantages for data maintenance:
Navigation: A view cluster contains convenient standard navigation between the individual maintenance dialogs. This simplifies the maintenance of the data in a view cluster.
Consistency: The view cluster ensures data consistency when deleting, copying, saving, retrieving and manually transporting data. For example when an entry in a higher-level view is deleted, , it automatically ensures that all dependent entries in lower-level views are also deleted.
You can first split tables with a lot of fields into various views and then collect them into a view cluster.
Use tabs to format very wide tables with a lot of fields.
Structure
Navigation in a view cluster is usually based on the hierarchy of the tables/views on which the dialogs are based. A view cluster usually consists of one or more root dialogs and the at most 14 maintenance dialogs which depend on them. A view at a lower level has one or more additional fields in its key compared its higher-level view. Each data record at the higher level has several dependent data records below it.
Each maintenance dialog is an independent unit consisting of an overview screen or an overview and a detail screen, depending on the dialog type. As well as the data to be maintained, the overview screen contains a navigation area, in which you can go to higher or lower level maintenance dialogs.
One-level maintenance dialogs only contain one screen, the list screen, in which all existing data records are displayed in a table. In a two-level maintenance dialog, double-clicking on a data record in the list screen takes you to the detail screen, which displays all the fields in the selected data record.
Generate a maintenance dialog for each view before you call the cluster maintenance (SM34). When you generate the maintenance dialog, flag the key fields which are identical in the view and its higher-level in the cluster, with the maintenance attribute S. The system fills the key fields when you go from the upper to the lower level, with the values of the data record selected in the upper level. Go to the transaction SE54 to define a view cluster.
<b>Rewards point if useful.......</b>
regards....
Abhaysingh.

Creating Z transaction from view cluster

Hi All!
I had created view cluster using SE54.This view cluster contains check tables to be maintained by the user.
Now my problem is how to attach these view cluster to a Z transaction through SE93.In production se54 is not available and i have to attach this view cluster to the Z transaction so that selected users are restricted to use this view cluster.
Regards
Praneeth
Points will be rewarded
Message was edited by: Praneeth kumar

Hi Rusidar,
You can actually use the transaction code SE93 to launch a view cluster. Say you have a view cluster: MYVC. Here is how you can create a transaction code to display this:
1. Execute transaction SE93.
2. Enter the desired transaction code in the input field, say MY_TCODE.
3. Click on 'Create' button. A 'Create Transaction' popup will open. In this popup, enter the short text for this code and choose the last radio among all radios which says "Transactions with Parameters ('parameter transaction')" and click 'OK'.
4. In the resulting screen, enter 'SM34' as Default Value for transaction. Then add the following two entries under 'Default Values' section (this section is located towards the end of the screen):
Name of screen field Value
SHOW X (means simulate click on 'Display' button
VCLDIR-VCLNAME MYVC ( This is the technical element that corresponds to the input field in the screen of transaction sm34).
5. Check the checkbox 'Skip Initial Screen'.
6. Save the transaction code.
Try running the code. If your cluster view already works via sm34, it should execute....
Cheers....
Regards,
Shiromani
Edited by: Shiromani Raj Sharma on Dec 26, 2007 10:33 AM

IPhone 6 month view in landscape mode??

hello, was wondering if there is a way to view an entire month in landscape mode on the regular iPhone 6 just like we can on the iPad?? Couldn't find it and would love this feature if it doesn't exist. I don't schedule things by the hour. I think the screen is plenty big for this and the month view in horizontal mode is useless since the little dots won't show colors.
Thanks for any info!

I haven't found a way to display the whole month in landscape view on my iPhone 6. May not exist. You can send feedback to Apple about this here:
http://www.apple.com/feedback/

Error while creating a View Cluster

Hello Gurus,
     I have created two maintenance views ZVIEW1 & ZVIEW2 with table maintenance generator.Know I am trying
     to create a view cluster using these views.
     I have Proceeded with the following steps to create the View Cluster:
     1. Tcode : SE54 --> GIven the name ZVIEWCLUSTER as View Cluster name & pressed ENTER.
     2. Filled the description of the View cluster.
     3.Selected the tab OBJECT STRUCTURE and filled it with ZVIEW1 & ZVIEW2.
     4.Selected view ZVIEW1 and clicked on button "FIELD-DEPENDENCE" ,System throws a message
         "Field-dependence generated succesfully"
     5. Selected view ZVIEW2 and clicked on button "FIELD-DEPENDENCE" ,System throws an error message
         "No log generated".
      Am stuck up at point 5 in the above mentioned steps.
      Please guide me in coming out of this error message.
Regards,
Najam

Hi Najam,
I don't think you need to define field dependencies for both tables, you only define the relationship from the second table to the first.
Double-click on the Field dependencies folder and check the link between the two tables is correctly defined, if so you don't need to generate the field dependency twice.
Regards,
Nick

Sorting of a field in view cluster

Hi All,
Is there any way to sort a field in main screen of view cluster.
SE54->Edit view cluster->Test. I want to sort a field in main screen, after pressing test.
Is there any event for this?
I know the events which get called after pressing test, but tables TOTAL and EXTRACT are blank in these events so I can't sort them.
Pointers will be highly appreciated.
Regards,
Seema

hi
In your method there would be a parameter ie ON_TOGGLE where you can write the name of your event .
Whenever your checkbox will be clicked that event wil be called.
You can write your code in that event itself.
Regards
Kuldeep

Is it possible to display the transaction in display mode in portal?

Hi All,
I have created one transaction iview in portal say for eg: SE38.
i want to display this transaction in portal only in display mode so that users cannot edit/modify.
I checked with giving "Read" permission in portl to that iview. even though the user is able to change.
is this possible for the particular transaction to display only in display mode not as editable mode in portal?
Thanks,
vijaya.

Hi Vijaya,
Ask your basis team to create two user on R/3 system
1st with edit permission to that Tcode eg - SE38
2nd with only view permission to that tcode eg - SE38
Now will doing, user mapping in user administrator in portal
set 1st userid /password to whom u have to give edit permission for that Tcode and set 2nd userid /password to portal user whom u want to just have read access for that tcode...
Hope this solves ur problem...
Please reward Points if helpfull.
Thanks
Gunja

Display mode for Material Description in MM02 for Partucular User/UsrGroup

Dear friends,
I required to set: Display mode for Material Description in MM02. (Configured thruu2019 Maintain field selection to data screen)
For Particular User / User group, it should be Change mode. How to achive this. Please advice.
Thanks and regards,
RAMAN

Hi,
I don't think you can realize it, because in SAP system there are 6 influncing factors:
Material Type
Plant
Industry sector
Transaction
Procurement indicator
SAP Delivery
Field selection is controlled by field references. You can assign field references to the influencing factors material type, plant, and industry sector in Customizing. SAP maintains the assignment of the field reference to the transaction codes, to the procurement types, and for the SAP delivery. You cannot change this assignment of these field references in Customizing.
So from my point of view, you can't use the factors of material type, plant and industry sector to distinguish different users' authorization.
Good day
Tao

Se54 view cluster (display mode)

Similar Messages

Maybe you are looking for