How to set and save Custom Print Settings in Aperture?

How to set and save Custom Print Settings in Aperture
Hi,
I am printing 12x18" images on 13x19" sheets. I find it difficult to enter the 13x19" dimensions because each value jumps to another random value when I move to enter the second dimension. For instance 13 jumps to, say, 8.5 as I type 19 into the second box. Same with the sheet dimensions.
Also, when I finally get it all correctly, the margins don't set themselves automatically - which I would I expect.
Then, even though I save the setting by clicking Save Setting at the gear below, next time I turn Aperture on, it's all gone.
Any ideas? Thanks.
Raphael

For me, it is working with these settings, Raphael.
Does your image have a 12x18" aspect ratio? You may want to crop it to the desired aspect ratio before printing.
I can only test with Aperture 3.6 on Yosemite 10.1.

Similar Messages

How to load and save custom workspaces in PE7

I've written a little utility which allows PE7 users to load and save custom workspaces. It's attached to post #1 of this thread.
System requirements
The utility has been tested with Windows XP Pro SP3 only. It might or might not run under Vista. It will only work with PE7 installations where the executable files are in the default places.
Installation
When you have downloaded the utility (it's only 199KB) you can run it from any convenient place in your system - it doesn't need to be installed as such.
Usage
It's pretty self-explanatory in use but here's the manual!
Run the downloaded utility "PE7WS.exe".
A file selection dialog appears. Choose the workspace layout file you wish to use. "LastUsed.layout" is the last used workspace (that's all you will be offered the first time you run the program). If you press Cancel at this point, the program will exit and nothing will happen.
Once you have selected the workspace, click "Open" and Premiere Elements 7 will run, using the workspace layout you chose.
After you exit from Premiere Elements 7, a workspace layout file save dialog will appear. If you made changes to the workspace during your Premiere Elements 7 session, you can now give the revised workspace a name and save it.
Do not save the workspace in a different directory from that which the dialog offers!
If you have changed an existing custom workspace, and you want to update the version previously stored, just select the name and over-write the saved workspace layout with the new one.
If you don't want to save the workspace at all, just click "Cancel" - next time you run Premiere Elements, you can choose the "LastUsed.layout" workspace to use that last used unsaved workspace in any event.
If you use the PE7WS utility to run Premiere Elements 7, and then you use the menu option "Window > Restore Workspace", then exit, you can either cancel the workspace saving stage, (which will mean that "LastUsed.layout" will contain that default workspace), or you could give that default workspace a name like "PE7 Default" so you can start a future Premiere Elements 7 session with the default workspace, even though you last used a custom workspace.
If you run Premiere Elements 7 in the usual way without using PE7WS.exe, the workspace that appears will be the last used one.
The usual disclaimer...
The utility should be entirely safe in use, but I can't accept responsibility for any loss or damage it might cause. However, the only file manipulation is does is to workspace files in the directory that Premiere Elements 7 uses purely for the purpose - the utility doesn't go anywhere near your precious project files.

I'm finding it very handy on my particular twin 22" monitor setup to sometimes use a one-screen layout and sometimes a two screen layout. I 'discovered' that having the timeline on the second monitor enables me to tweak edits there while having the playback full size after pressing the "full screen" button on the first monitor. Where the timeline would normally be I have the history, mixer, and other windows always open. As the second monitor is also used by another PC (the one I have the net and email etc on) using "Maxivista" monitor sharing software, I revert to single screen layout when doing stuff like exporting to DVD so I can see what is going on with the render while typing stuff like this.
Selectable workspaces are dead handy!

Cannot set custom print settings using mg6220

Have just purchased a new iMac running 10.8.2 and Canon MG 6220. Can print, but am not able to set custom print settings and see disclosure triangle in the Print Dialogue Window that I would click on to get to this option. The instructions and illustrations in the manual are not the same as what I am seeing in my print window.

Then I think you have selected the AirPrint driver rather than the MG6200 Series driver.
So what you can do is open Print & Scan, select the current MG6220 in the Printers list and press the minus button to remove it. Then click on the plus button next to the minus button to add but if a little sub-menu window appears showing the MG6220 under the heading of Nearby Printers, as shown below with my MP990, do not select this.
Instead, select the menu item that says Add Printer or Scanner. This will make the Default Add printer view appear. Here you should see the MG6220. Select it and if the Use menu shows AirPrint, click on this menu and select Canon MG6200 Series. Then click Add to complete. This should now give you the same Quality & Media menu that I have shown above.

How to set HP 4502 to print black only

How to set my HP4502 to print from Mac in black ink only

Hi @floraoverst,
Welcome to the HP Support Forums! I see you would like to print in black ink only on your HP Envy 4502 with your Mac running the Mavericks 10.9 Operating system. Please follow the steps listed below:
Printing with the Black Print Cartridge Only option
Click File and then click Print.
Make sure your printer is selected.
Verify that the Preset option is set to Standard.
In the Copies & Pages menu, select Select Paper Type / Quality.
NOTE:If this option is not available, click ColorSync. Then click the down arrow beside Quartz Filter and change the setting from None to Black & White.
Select the Paper tab.
From the Color option menu, select Grayscale.
Select the Color Options tab.
Select the Black Print Cartridge Only option.
If that option is not listed, then it is not available. The printer will print using only the black cartridge, however, printing with one cartridge will be slower than printing with both cartridges.
NOTE:To save the setting, click the arrow next to Preset and select Save As. Save the Preset option as Black Cartridge Only and then click OK. Then, the next time you want to print with just the black cartridge, select the Black Cartridge Only Preset. -Source
I hope this helps!
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

How do I make Adobe Reader print settings document-specific?

This question concerns Adobe Reader XI, v. 11.0.07 on Windows 7. This is a new environment for me.
If I open 2 pdf documents and change the print settings on one of them (say from Portrait to Landscape), the other document's print settings also change to Landscape. This didn't happen with the previous Adobe Readers I have used. How do I change the print settings for each document so that they don't affect the other documents?
Uday Reddy

Acrobat retains (most) print settings while the program is open, and many though a close.
Scaling, Print as Image, Print to File, Print color as black, Comments & Forms all are retained until changed.
Printer Features (anything set through the Properties tab), all are retained until the program is closed.
Not retained in any case is Page range & copies.

Unable to click 'Set and save as my Active Configuration for this project'

Environment: OWB 11.1.0.6 Client running on Windows XP Pro SP3 repository and targets on AIX (IBM UNIX).
I have created a new Configuration under a specific Project and I'd like to make this configuration the default whenever I login and select this Project.
There is a check box when I right click the Configuration and select 'Open Editor' that says 'Set and save as my Active Configuration for this project' but when I select the check box and try to click on 'OK' there is no response from the popup window and I have to click 'Cancel' to get out of the popup.
Any ideas on why this is happening and how to get around it??
Thanks very much.
-gary

Si
Good catch!! Restarting the app???? What a waste of time!! :-(
When I went back in the box was already checked! It must have known I was pissed at it!! :-)
Thanks for the help.
-gary

How to change and save a new file in Edge web Lumira server for Team ?

Hi Lumira folks,
I've installed SAP Lumira 1.0, Edge edition and View a sample 'Dairy Wholesaler-Sample"
I'd like to change it and save as new file, but "Save" button is disabled and when I put my mouse over the button,
it says "Save Option is disabled in this version".
Is there any idae how to change and save as a new file in Lumira Edge ?
Many Thanks.
JH

I've just found the reason as below.
http://scn.sap.com/community/lumira/blog/2015/03/20/lumira-server-for-teams-edge-edition-version-compatibility
The current version of Lumira
server for teams is 1.0. This version uses Lumira 1.22 as its 'engine' as this
was the version of Lumira Desktop that was shipped at the same time.
Hence with the current Lumira
version compatibility; namely that a newer version of the product can open an
older document, but an older version cannot open a newer document, care must be
taken when deploying Lumira server for teams.
Lumira server for teams is only
compatible with Lumira desktop 1.22. If you intend to deploy Lumira server for
teams, ensure your desktop users do not move to a later version of the desktop.
Content created in a later version of Lumira desktop can be uploaded and shared
via Lumira server for teams, but it cannot be viewed or edited online in the
browser.
Ensure desktop users disable the
auto update capabilities in the desktop preferences, and set the update to
none.

How to set and resent reconcilation a/c for Assent a/c

hi
how to set and resent reconcilation a/c for Assent a/c
amk

You are permitted to post the recon account undercertain special circumstances :
USe the transaction codes OAMK and OASV.
Kindly read the SAP on line documentation before making a postings directly to the recon account.
Definition of the Reconciliation Accounts
You are not allowed to manually post to the reconciliation accounts for Asset Accounting in Financial Accounting. Normally, you designate the corresponding General Ledger accounts in Financial Accounting as reconciliation accounts. This change, however, can no longer be made in Financial Accounting, once these accounts already have balances from the legacy data transfer. However, you can use a special report to assign these accounts the status of reconciliation accounts in Financial Accounting (in Customizing for Asset Accounting, choose Preparing for Production Startup ® Production Startup ® Set Reconciliation Accounts).
There is another report for removing this specification (Reset Reconciliation Accounts).
Subsequent Correction Postings to Reconciliation Accounts
Suppose you have already defined the asset G/L accounts in Financial Accounting as reconciliation accounts, but still need to transfer balances to these accounts, or make corrections. You can make correction postings to these reconciliation accounts with a special posting transaction in Customizing for Asset Accounting (Transfer Balances), using posting key 40 or 50. You can only postings to those accounts in a company code with implementation status (Customizing for Asset Accounting, choose Preparing for Production Startup ® Production Startup ® Activate Company Code).

Transfer custom print settings to mountain lion

Hi,
I have previously transferred .plist files from one computer to another in order to transfer or preserve custom print settings (I have lots). However, when I tried this from a Lion machine to a Mountain Lion machine, it did not work. Examining the .plist file suggests there are some differences, particularly at the end of the file. Does anyone have any insight on what I want to do before I get my hands dirty trying to hack the file myself?
Thanks!

Chance Harper wrote:
I am not in a possition to make use of the Migration assistant. Mac pro "A" has snow Leopard on it. Mac pro "B" has Mountain Lion on it and I am unable to put Snow Leopard on the Mac Pro B. It has been installed by a fresh copy of ML (in other words it was not upgraded from SL).
Why not?
When you say "all you have to do copy the entire Mail folder in the user's /Library folder" ... where should I copy this to? As I understand things you are telling me to copy the mail folder from Mac Pro "A" to Mac pro "B" but I don't know to what location?
What part of copy the entire Mail folder in the user's /Library folder was not understandable? That implies to the same user's Library folder on MP B.

How to Set and Use a global variable within a session?

Dear All,
I'm new to jsp, and would like to ask how to set and use a global variable within a session?
Thanks in advance.
Regards,
Cecil

With session.setAttribute("name",object) you can store a Attribute in the session object.
with session.getAttribute("name") you can get it.
That's it.
Regards,
Geri

How to set and retrive the index log path stored by parameter LOG_DIRECTORY

how to set and retrive the index log path stored by parameter LOG_DIRECTORY.

http://download-west.oracle.com/docs/cd/B19306_01/network.102/b14213/lsnrctl.htm#sthref72
http://download-west.oracle.com/docs/cd/B19306_01/network.102/b14213/cmctl.htm#sthref239

How to create and save playlist using JMF?

Hello i m new to JMF. Can anyone tell me how to create and save a playlist of media files using JMF.
also how can i play .DAT files using JMF?
Does JMF supports AVI,Asf files?

Hello i m new to JMF. Can anyone tell me how to create and save a playlist of media files using JMF.
also how can i play .DAT files using JMF?
Does JMF supports AVI,Asf files?

If user disable cookie how to set and use session with URL Rewritting

if user disable cookie how to set and use session with URL Rewritting by append session ID in url

If cookies are disabled, then app server will automatically try to use URL rewriting for session control. Programmer's responsibility is to encode any links or redirects using
response.encodeURL("/yourPage.jsp")
and
response.encodeRedirectURL("/yourPage.jsp")
See API for details
http://java.sun.com/j2ee/sdk_1.3/techdocs/api/javax/servlet/http/HttpServletResponse.html#encodeURL(java.lang.String))

How to modify and save the data in the table control

how to modify and save the data in the table control

hi priya,
kindly go thru the code below.
PROCESS BEFORE OUTPUT.
MODULE status_9010.
LOOP WITH CONTROL tab_control.
    MODULE move_data_to_table.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE user_cancel AT EXIT-COMMAND.
LOOP WITH CONTROL tab_control.
    MODULE move_data_from_table.
ENDLOOP.
MODULE move_data_to_table OUTPUT.
This is to move the data from the internal table to *the table control
*zmpets_mode-modecode, zmpets_range-rangeid, *zmpets_servfacto-factor are field names of the table *control columns.
READ TABLE int_factor INDEX tab_control-current_line.
IF sy-subrc = 0.
    zmpets_mode-modecode = int_factor-modecode.
    zmpets_range-rangeid = int_factor-rangeid.
    zmpets_servfacto-factor = int_factor-factor.
ENDIF.
ENDMODULE.                 " move_data_to_table OUTPUT
**********************************************8888
MODULE move_data_from_table INPUT.
*To move the data from the table control to internal *table 'INT_FACTOR'.
int_factor-chk = line.
int_factor-modecode = zmpets_mode-modecode.
int_factor-rangeid = zmpets_range-rangeid.
int_factor-factor = zmpets_servfacto-factor.
   MODIFY int_factor INDEX tab_control-current_line.
    IF sy-subrc NE 0.
      APPEND int_factor.
      CLEAR int_factor.
    ENDIF.
ENDMODULE.                 " move_data_from_table INPUT
if this helps , kindly award points.
for any clarification just mail me.
regards,
Anversha.S
[email protected]

How to render and save a file as windows media file or mp3?

I have worked in Sony Vegas 9 and I was hoping Adobe Premier Pro CC was similar--- but its not. I can't figure out how to render and save a file as a windows media or mp3 or in any format for that matter.

Search for exporting in the help file
Not all for PProCC, but The PPro/Encore tutorial list in message #3 http://forums.adobe.com/message/2276578 may also help, with more help in message #5
PS - rendering is the process of creating temporary files to aid in timeline playback, while exporting creates new files

How to set and save Custom Print Settings in Aperture?

Similar Messages

Maybe you are looking for