How to set Auto Portrait/Landscape as default
Hello all,
My organization uses Adobe Reader 10.1.2. I am trying to figure out how to set up Adobe Reader to automatically select "Auto portrait/landscape" option in the printing screen when an item is printed from within Adobe Reader.
As of now, when I go to Print a file, it automatically selects "Portrait" (or whatever the default orientation is for the default printer). I would like for "Auto portrait/landscape" to come up as the default selected option when printing.
Can anyone help with this? Thank you in advance!
Hi,
Thanks for trying to help me out with this. To answer your question, yes I have checked the properties of my printer driver. The default printer is set to Portrait. When I try to print through Adobe Reader, the printing is automatically set to Portrait. which makes sense, except that I want it to be set to Auto Portrait/Landscape.
On some computers, Adobe Reader printing window is set to Auto Portrait/Landscape by default, so I know it can be done, but on others it is set to Portrait (the default option of the default printer). I am trying to find out why some computers are set to the Auto Portrait/Landscape option by default when printing in Adobe, while others are set to the default printer option.
All computers have Portrait as default in their default printer properties.
Similar Messages
-
Printing pdf auto portrait/landscape setting
acrobat X print of PDFs no longer has auto portrait/landscape as default but only for 1 user on the laptop. does anyone know how to amend the default setting please
Hello Pelle,
Thanks for the feedback. Our printing code in Adobe Reader Touch doesn't have that capability right now, but since you mention it we should probably do what you're requesting by default. I'll put that into our backlog for a future update, but I can't say yet when it will be available.
In the interim, if you have pages that are different orientations, you can print them in blocks manually to get what you want, but I understand that's a hassle.
Dennis -
How do I get Adobe Reader XI to default to Auto Portrait/landscape when I print?
How do I get Adobe Reader XI to default to Auto Portrait/landscape when I print?
I too am looking into this issue for someone at my work and hoping someone can provide a resolution for this nuisance.
It is correct that that Auto Portrait/Landscape is usually set to default for Adobe Reader XI. One day, Portrait was randomly switched as the default setting. Granted the setting could be set back to Auto on a per file basis, this slowed down the time to mass print several landscape reports. The problem only occurred under one Windows account profile while other user accounts defaulted to Auto as expected. Uninstalling the software, clearing out all Adobe traces from Programs/Program Data/Application Data/Registry, and reinstalling the software did not make any difference. All printer preferences/configurations were the same amongst the different user accounts.
While it would sound like rebuilding that one person's profile would be the final solution, it wouldn't be ideal to reconfigure the several remote connections with banks and hospitals (we're an anesthesia billing company) on a new profile for what might be a simple, yet elusive fix to this print setting. I have noticed other posts on other sites mention this issue, but no resolutions have been provided yet. I'm sure part of what makes this difficult to resolve is the inability to replicate this issue elsewhere. -
How do I get the "auto portrait/landscape" option to show during printing in Adobe Reader Touch
When I print using Adobe Reader Touch, the "auto portrait/landscape" options does not show up. As a result, all pages in a document are printed in the same orientation even if they are not all of the same orientation in the file itself. I don't believe this is a printer issue because if I use Adobe Reader X (v. 10.1.6) on the same computer/printer, the auto option does show up and the documents print as desired. I use Windows 8. As the video quality of Adobe Reader X is extremely blurry in Windows 8, I would like to be able to use Adobe Reader Touch exclusively. How do I get the latter to give me the "auto portrait/landscape" option during printing?
Thank you,
PelleHello Pelle,
Thanks for the feedback. Our printing code in Adobe Reader Touch doesn't have that capability right now, but since you mention it we should probably do what you're requesting by default. I'll put that into our backlog for a future update, but I can't say yet when it will be available.
In the interim, if you have pages that are different orientations, you can print them in blocks manually to get what you want, but I understand that's a hassle.
Dennis -
My profile in camera calibration in lightroom 5 showing only embedded". How to set profile to landscape or portrait. I can't find any other option, only embedded. How to install all profile's?
The profiles are there, but they only display and are only available for raw images. The image that you are highlighting is either a JPEG or some other non--raw file format. The only profile available for non-raw images is the embedded profile.
-
As the title says, pdf is fine on screen but when printing using auto portrait/landscape a black mark appears on the screen as in the photos below
when the orientation is selected the line disapears and the print works correctly
Anyone have any idea why this would happen?
Thanks
BenHello Pelle,
Thanks for the feedback. Our printing code in Adobe Reader Touch doesn't have that capability right now, but since you mention it we should probably do what you're requesting by default. I'll put that into our backlog for a future update, but I can't say yet when it will be available.
In the interim, if you have pages that are different orientations, you can print them in blocks manually to get what you want, but I understand that's a hassle.
Dennis -
How to set current year,month as default value in combo box
hi, im newbie of xcelsius user
i realize that hv a issue that display combo box base on year & month
let said
<b><u>step 1</u></b>
I create excel data like this
<b><u>year___ </u> </b> | <u><b>month_ </b></u> | <u><b>Product</b></u> | <u><b>revenue</b></u>
02-04-09 | 02-04-09 | a | $4,154
03-04-09 | 03-04-09 | b | $6,813
04-05-09 | 04-05-09 | a | $9,875
05-06-09 | 05-06-09 | b | $6,813
06-04-10 | 06-04-10 | a | $6,813
07-04-10 | 07-04-10 | b | $9,875
08-06-10 | 08-06-10 | a | $9,875
22-06-10 | 22-06-10 | b | $6,813
<u><b>Step2</b></u>
Then i go format cell to format/custom date to year & month
Eg1: Year u2013> 02-04-09 convert to u2018YYYYu2019 (2009)
Eg2: Month u2013> 02-04-09 convert to u2018mmmmu2019 (April)
So output like this
<u><b>year</b></u> | <u><b>month</b></u> | <u><b>Product</b></u> | <u><b>revenue </b></u>
2009 | April | a | $4,154
2009 | April | b | $6,813
2009 | May | a | $9,875
2009 | June | b | $6,813
2010 | April | a | $6,813
2010 | April | b | $9,875
2010 | June | a | $9,875
2010 | June | b | $6,813
But the problem is when i insert to combo box,use u201Cfilter Row u201D, i excpectation will display only 2009,2010
But Actual display the Year in combo box is duplicated :'(
so any solution ? and then only how to set current year & month as default value :'(
thanks,
regards
s1
Edited by: Leong Pui Kee on Feb 25, 2011 5:25 AM
Edited by: Leong Pui Kee on Feb 25, 2011 5:36 AMhi,
your created data
step 1
I create excel data like this
year___ | month_ | Product | revenue
02-04-09 | 02-04-09 | a | $4,154
03-04-09 | 03-04-09 | b | $6,813
04-05-09 | 04-05-09 | a | $9,875
05-06-09 | 05-06-09 | b | $6,813
06-04-10 | 06-04-10 | a | $6,813
07-04-10 | 07-04-10 | b | $9,875
08-06-10 | 08-06-10 | a | $9,875
22-06-10 | 22-06-10 | b | $6,813
In this, year and month both are same data, make the diffent data like year 2009, 2010 And month Jan, Feb, March, ...Etc
and also one more check you formulas on month and year, select correct source data, destination data for compoonent..
OR
from above, to create a date column and convert date-->year, date--> month and Explore it.
All the best,
Praveen -
How to set my iPad as a default device while my iPhone and iPad share a same email address?
Shiv1611 wrote:
Though i am still gona try using the same Itunes. Will same Itunes support two apple ids.
That depends on what you mean. If you mean two iTunes Store accounts, no. Only one Apple ID can be logged into the iTunes Store at a time and if automatic download, iTunes Match or re-downloading of content is used the ID can not be changed for 90 days.
Shiv1611 wrote:
So i guess if i solve my goof up on creating different apple IDs and setting her phone as a new one .. according to you that shall do the trick.
But i have a question here in that case what happens to all the applications that have been purchased on my Id ? Wont i be needing them to be purchased/downloaded again in the new id?
If you previously had been using the same Apple ID for iTunes Store purchases for both of you there is no reason to change what you've been doing. If this is your wife's first iPhone, and you want to share the iTunes Store account just don't use the new Apple ID you created. As long as there are no purchases on it there's nothing to worry about. -
How to set Bluetooth headset as a default answering device in iphone?
How to set Bluetooth headset as a default answering device in iphone?
All you need is to pair it.
http://support.apple.com/kb/TS2225 -
How to set auto delete option for old messages
Hi All,
Can any one help me on how to set auto delete option for mails older than 15 days from my Z10.
James KurianThere is no such option in BB 10.
However, you can achieve a similar result by setting your email sync timeframe to 14 days (the closest option).
If you are using an ActiveSync account (such as Hotmail, Outlook.com), go to Settings > Accounts > select the account. Tap advanced at the bottom of the screen. Scroll to the very bottom, tap Sync Timeframe and set to 14 days.
If you are using an IMAP account (such as Gmail or GMX), you will have to delete, then re-add your account. The Sync Time frame is only avaialble during setup for these accounts. When adding, tap advanced at the bottom of the screen and set the Sync Timeframe.
Hope this helps. -
How to set InDesign CS5 as the default in the system having InDesign CS4 has the default ?
How to set InDesign CS5 as the default .indd application when you have InDesign CS4 and CS5 installed and InDesign CS4 is the current default (InDesign CS4 was installed after CS5 installation)
Thanks, but I already tried it at first but it is not the effective method.
I think its because of the this reason :
Both - InDesign CS4 and InDesign CS5 have their application/program/exe named as "indesign.exe".
Installation of either InDesign CS4 or InDesign CS5, sets a Windows default path for the "indesign.exe". In this case, since InDesign CS4 was installed later (after InDesign CS5 was already installed), the "indesign.exe" which was directing InDesign CS5's "indesign.exe" was replaced by InDesign CS4's "indesign.exe".
But after long google and search through regedit, I've got the solution :
Locate HKEY_CLASSES_ROOT\InDesign.Document\Shell\Open\Command in regedit
Change the value of (Default) attribute to "C:\Program Files (x86)\Adobe\Adobe InDesign CS5.5\InDesign.exe" "%1" // Include the quotes
Message was edited by: Vidit Kothari -
How to set auto backup as like quark express
Hi,
I want to know how to set auto backup opening files in InDesign 6 as like quark expressInDesign restores everything after a crash.
Versioning was removed aw hile ago, now you should set it up on OS or computer level or use a cloud service like dropbox which offers such functionality.
For formatting use Paragraph Styles, for exceptions use Character styles. It is a no-go to make a font bold, it must be done via styles. I think it is a problem with Quark documents that people bolded with the B button their text, this caused false styles and did no semantic styling which would not allow to create PDF/UA documents.
Paragraph and Character Styles are completely different in InDesign than in Quark. In InDesign every font property is defined in a paragraph style. Character Styles are only used for exceptions and only the different properties are defined. E.g. if you have black text and want some words or letters to be red the InDesign Character style would define only the property character color to red, everything else would remain empty. So you could apply the same character style to text with different paragraph styles with different fonts and sizes. In Quark you would have to set up a different character style for each paragraph style. -
How to Set "RETAIN" provisioning action as default???
Hi All,
I would like to keep "RETAIN" provisioning action as default in ARQ while "adding" a role.
Actually, there is one configuration parameter "2045" which will make it possible. But this is ONLY applicable to the situation where a role is selected from existing assignment by clicking on "Existing Assignment" button.
As soon as a role is selected from the existing assignment automatically the provisioning actions is set to "RETAIN" (due to the config. parameter 2045).
But what I want is, whenever a user adds a role to a user in access request form, the default provisioning action should be set to "RETAIN". I could not find any suitable configuration parameter for this.
Has anyone set this before? Or does any one know how to set it?
Please advise.
Regards,
FaisalHi Alessanrdo,
Thanks for your reply.
Actually the motive behing this option is to cover the "loop hole" of ARQ application. If you notice, we can "keep" adding the same role which is already assigned with different validity dates. ARQ does not control this!
Eventually, what happens that in the back end system, the user master record is overwhelmed with the same role entry with different validity dates!
Unfortunately, application does not have any control over this. Therefore, at least making "RETAIN" as the default provisioning action, we can have a "sort" of control over this. What happens is, if I add a role which is already assigned to a user and change the validity dates, there will not be any new entry in the back end system with the same role.
Hope this will help you understand the requirement and advise me.
Regards,
Faisal -
How to set up icloud as the default calendar in Outlook
how do I set up icloud as the default calendar in Outlook?
Not possible, Outlook only allows Exchange or local calendars to be the default, same with Contacts.
-
How to set a room part as default in a room template?
Hi,
Can you please tell me how to configure a room part as the default one for a room template. The requirement is that this room part must be the first one to be opened when a room of the specific template is opened inside collaborations. NW7.0 . Please provide you suggestions.
Thankyou in advance..Hello Lorcan,
Thank you for the information. But even after trying to set it as extension the changes was not getting reflected. Another way which I tried to set the room part as default after adding the extensions is below:
Content Administration -> Portal Content -> com.sap.ip.Collaboration -> Template Worksets (where the customized templates are there)->In the selected template I tried setting the property "Default Entry for Folder" as yes for room part "Documents".
As of now room part "Task" is opened as default for the room but I want "Documents" to be opened by default. Please advice on the same.
Thank you in advance..
Maybe you are looking for
-
Goods Receipt through internal order with movement type 262
Dear Friends, some of our users making entries like the following 1. created Internal Order 2. Creating Reservation with movement type 262 ( which not issued material through movemnt type 261) 3. Stock updated i just want to confirm, we not issued
-
How to convert internal table data to text
data : RES_CONTEN type string. My problem is in inernal table IT_COMM there will be 7 to 8 rows of data is there when iam sending into Res_content it is showing only last row of IT_COMM there after iam converting into Ftext, after that iam creating
-
I may have totally screwed myself but...after installing Yosemite without checking for potential problems with Adobe software, my CS4 Design Premium suite wouldn't open. So after consulting some forums, I deinstalled it, but I only have disks for my
-
I have a first gen iPod running on 2.2.1 that will not upate to 3.3.1. after purchasing the update from Apple. How do I get a refund or, if possible actually get it to update? I'd like to be able to use some new apps like Netflix and Facebook, but m
-
Create document item from list, then no lookups
SharePoint 2013: I have a content type set up in a document library with a default document template attached (in this case an excel workbook file). In SPD 2013 (using a 2010 workflow), I can use the "Create Item in List" function in SPD from an adja