How to set configuration flag

Could someone help me ?
How do you set the cfg flags with Forte ?
Is it a command line option ?
Thanks

C:\forte\30M0\install\bin\ftexec.exe -fi
bt:c:\forte\30M0\userapp\forte\cl0\forte -fm (x:64000) -fns
NodeName:5001 -fr ReposName -fl "!stdout(cfg:c4:13:1)"
Above is an example for starting a forte application with logger flags being sent to StdOut. You can send them to file by specifying a filename instead of !stdout.
Hope this helps,
Allister Dickson
Technical Architect
Xpedior Australia

Similar Messages

HOW TO SET DELETION FLAG TO SERVICE ENTRY SHEET ?

Dear Experts,
Can anybody explain how to set deletion flag to Service entry sheet created ?
Service Entry sheet has been accepted and saved, i want to set deletion flag to the Service Entry sheet.
Thanks in Advance

Hi,
Go to ML85 and give your service entry sheet no in Entry sheet data and select "cancel release" check box and give the corresponding release code and execute and save. The release gets cancelled.
The other way is go to ML81N and give your Po and service entry sheet and click on the icon "cancel release" (reverse arrow mark) give the corresponding release code for cancellation and save. Now the service entry sheet will go to "No acceptance" mode. again go to the change mode and select the line item and delete it by clicking on delete icon.
regards,
Kannaiah Naidu

How to set "Configuration Variant" for a sales order item using function

Hello All,
I use function module 'SD_SALES_DOCU_MAINTAIN' to create Customer Indep. Requirements but how to set "Configuration Variant" for a sales order item.
Is their any idea or sample code?

Hi Zhijun zhang,
<u>http://help.sap.com/saphelp_nw2004s/helpdata/en/c0/98038ce58611d194cc00a0c94260a5/content.htm</u>
<u>http://help.sap.com/saphelp_nw04/helpdata/en/c0/980374e58611d194cc00a0c94260a5/content.htm</u>
A variant is simply an SAP report where the parameters for running the report have been set by the user and then saved with unique name. This allows future retrieval and execution of the report faster without reentering the parameters. As a convention the variant name should start with with the digits 50 so searchs for LHU variants is easier and quicker.
The first link will guide you by screen shot wise.
Award points if it adds information.
Thanks
Mohan

How to set acknowledgement flag in asynchronous message

Hello,
I just read in the documenation that it is possible to request acknowlegment messages by setting an "acknowledgement tag" in the request message.
My question now is how to set this acknowledgement tag and which rules I have to follow? Do you have any more information on this topic? I see the flags in "ReliableMessaging" but not sure how to set them.
Thank you.
Edited by: Florian Guppenberger on Dec 2, 2009 5:16 PM

Hi,
For idoc check this links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
I don't think it is possible for Proxy.
Regards
Ramesh

How to set a flag

How can I set a flag?
I tried to connect a boolean (true) to a local variable, but it didn't work since the local variable had a question mark in it!
Is there a better method to set a flag?
Many Thaanks

They also use extra memory which can also dramatically slow down your app and they break dataflow with the risk of race conditions. Programs with a lot of locals are much harder to debug - trust me on this. Shift registers can be very tidy if done right and don't cause the problems that locals do. The "LabVIEW Development Guidelines" document that ships with LabVIEW has a section on locals/globals and a reference to functional global variables which can be used to replace a standard global variable but nothing in LabVIEW is as effecient as a wire.

How to set deletion flag in Production order item level

Hi Friends,
I have a requirement like...
Suppose production order conatians 100 items. now i want to set deletion flag for 20 items only.
In Co02 t.code deletion check box is disable mode.
There are nearly 100 production orders .i have to write the program....
Is there any BAPI or other way to meet this requirement.
Can you please help me..

Also, You might want to have a look at the BAPIs like BAPI_PRODORD_SET_DELETION_FLAG which are used to set the deletion indicator but it appears to me the deletion flag can only be set at the header level using these BAPIs.
Please have a look at SAP business object BUS2005 methods from transaction SW01 for more Production Order related BAPIs.
One more thing ... since you mentioned that in CO02 the deletion indicator is greyed out, then it might mean you are missing the authorizations to set the deletion flag. Please consult with your Authorization (BASIS) administrator. As a hint, the authorization object here is C_AFKO_AWK.
Cheers,
Aditya

How to set fragment flag on/off

this is work related, I have to be able to set the IP datagram so that it conforms to RFC1191 (PMTU) with fragment flag on/off. Is this is possible to do with java? I've noticed that I was only able to set the traffic but not fragment.

I have to be able to set the IP datagram so that it conforms to RFC1191 (PMTU) with fragment flag on/off. No you don't. The DF flag can't be set from Java or even from C. It is set, or not set, by the TCP stack. Nothing you can do about it. TCP also controls the PMTU, nothing you can do about that either, except enable path MTU discovery in your OS configuration (e.g. Registry settings). But it should already be set. Anyway either your TCP/IP stack implements RFC1191 or it doesn't. I'd be amazed if it didn't at this late stage. Nothing you can do about it from Java.

How to Set/Configure Manual GPRS Setting with Asha...

Can any one help me with to set manual GPRS setting for Nokia Asha 200.
I want to change the GPRS setting, But there is no option for "Edit" or "New" (Configuration)
Thanks
Ricky

Hi framor,
Welcome to Nokia discussions board!
In order to set up an internet access point for your Nokia Asha 200, please follow the steps below:
Menu
Settings
Configuration
Personal Settings
Add (or add new)
Internet
Edit account name > input operator’s settings
Select “No” in use “preferred access point”
Access point settings
Bearer settings
Edit “packet data access point” > input operator’s settings
Back 4 X
Default config. Settings: select “personal configuration”, and click on “by default”
By default in apps: select “yes”
Please ask your operator to send you an SMS for automatic set up. If you have an issue connecting to the internet, you may set up the access point manually as described above.
For further support on internet acces on your device, please contact your operator.
Let us know how you get on and feel free to post any other questions you may have.
Regards,
Astra2025
Press the 'Accept Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

How to set configurations to mail when virus detected ?

I want to change the configurations of mail server to redirect or do not deliver the message when a virus is detected. I'm using OS X Server 10.8.1 with Server.app 2.0.23. On previous version of Server these configurations are avaiable on Server Admin Tools. Now it has a little few options. How to change it now ?
Best regards,
Leo

In terminal enter:
sudo serveradmin mail:postfix:spam_action = "reject"
I haven't tried this, but the default is "deliver" so logically changing it to "reject" would do the trick...
Just make sure that you set the spam score needed to be marked as spam to the desired level by entering:
sudo serveradmin settings mail:postfix:required_hits = 6
As I've read that there is a bug using the Graphical User Interface...

How to set the flag of the mail when I read it for POP3

HI,
All
I know that POP3 does not support the flags. As per my knowledge the only flag POP3 supports is the DELETED. if i am not wrong.
Now what i have to do is when i fetch the mails programmatically and once i read that I want to mark that mail as read in the yahoo also. means when i reterieve the mails through my client from the yahoo mail and next time when I Open the yahoo account the mail that i have retrieve must be seen as read rather than unread.
Yahoo uses the POP3 Server for the incoming mails the same thing also happens with outlook you can find that outlook also uses POP3 as the incoming mail server and when we reterieve the mails from the yahoo using the outlook by some way Outlook marks the mails on the yahoo server as read the same thing I have to do for my client Program using the POP3 server.
If Outlook does it dispite of the POP3 server there must be some way to do the same thing for the POP3 server using the Java Mail Api.I dont know how to do that thing and mark the mails as read once I fetch them.
Any Help is appriciated,
Rahul.

I have tried to access the content of the message using the my program to fetch the mail but still Yahoo does not mark it as the read in its web interface.
so I want to know how to do that. and also want to know that when you are doing same thing for the outlook then it mark it as a read on the Yahoo web mail interface so I want to know how do they do it means how Outlook mark it as a read mail on the yahoo server despite of the POP3 server.
If anybody knows how outlook does that than we can do same using the Java mail Api.
Regards,
Rahul

How to set model flag to JasperViewer

Hi all,
I did Jasper Report Successfully but only problem is while viewing it doesnot go in model. It allows to play with application. How can I set Model to Jasper so that my application will lock until jasperviewer is closed.
anybody know pls help me.
--Harish

Hi,
Go to ML85 and give your service entry sheet no in Entry sheet data and select "cancel release" check box and give the corresponding release code and execute and save. The release gets cancelled.
The other way is go to ML81N and give your Po and service entry sheet and click on the icon "cancel release" (reverse arrow mark) give the corresponding release code for cancellation and save. Now the service entry sheet will go to "No acceptance" mode. again go to the change mode and select the line item and delete it by clicking on delete icon.
regards,
Kannaiah Naidu

How to set user flag for a local windows user account.

In my C# client I am getting the directory entry of the user in the following way :
DirectoryEntry userDE = new DirectoryEntry("WinNT://machinename/User12", "MachineName\\Administrator", "Password");
I want to add a userflag to this user.
I tried the following :
userDE.Properties["UserFlags"].Add(65536);
But the issue is that it is updating the user with new user flag instead of adding it to the userflag.(for example the user already had the flag 'User cannot change Password' and i tried adding 'Password never Expires'.But after the operation the user only
had the flag 'Password Never Expires')

chek these link, does it help you
http://support.microsoft.com/kb/305144/en-us

How to set configure path info in 6.0 for developing a app

For example:
I install weblogic6.0 in c:\,so the path is c:\bea\
and my working forlder is d:,I develop a new app named 'test'
The path info is as follow:(root is d:\test\)
\meta-info\application.xml
\web\
..\web-info\
\ejb\
..\ejb-info\
So,when I look the document in the bea web site,they tell me how to deploy it
with archive app a .war file.But that only for deploying.How to run it in developing
stage?
Help me,Please!

Another question regarding the name of the JWS file:
Found the following on one of WL 10.3 example server's help documentation pages:
"The wsdlc task generates this JWS implementation file in the directory specified by the destImplDir attribute. The subdirectory hierarchy corresponds either to the packageName attribute or to the targetNamespace URL of the WSDL if the packageName attribute is not specified. The name of the JWS file is ServiceName_PortTypeNameImpl.java, where ServiceName and PortTypeName refer to the value of the name attribute of the appropriate <service> and its inner <port> element, respectively, in the WSDL file. The names of the methods and parameters in the JWS file are the same as the names of the operations and input parmeters in the WSDL file."
Does this mean that the wsdlc task creates this file, with the name format specified above, by default. beccause, I dont see such a file created for me. What it creates for me is just the service_port_type_nameImpl file.
Which one is correct?

How to Set up HTTPOnly and SECURE FLAG for session cookies

Hi All,
To fix some vulnerability issues (found in the ethical hacking , penetration testing) I need to set up the session cookies (CFID , CFTOKEN , JSESSIONID) with "HTTPOnly" (so not to access by other non HTTP APIs like Javascript). Also I need to set up a "secure flag" for those session cookies.
I have found the below solutions.
For setting up the HTTPOnly for the session cookies.
1] In application.cfc we can do this by using the below code. Or we can do this in CF admin side under Server Settings » Memory Variables
     this.sessioncookie.httponly = true;
For setting up the secure flag for the session cookies.
2] In application.cfc we can do this by using the below code. Or we can do this in CF admin side under Server Settings » Memory Variables
     this.sessioncookie.secure = "true"
Here my question is how we can do the same thing in Application.cfm?. (I am using ColdFusion version 10). I know we can do this using the below code , incase of HTTPOnly (for example).
<cfapplication setclientcookies="false" sessionmanagement="true" name="test">
<cfif NOT IsDefined("cookie.cfid") OR NOT IsDefined("cookie.cftoken") OR cookie.cftoken IS NOT session.CFToken>
<cfheader name="Set-Cookie" value="CFID=#session.CFID#;path=/;HTTPOnly">
<cfheader name="Set-Cookie" value="CFTOKEN=#session.CFTOKEN#;path=/;HTTPOnly">
</cfif>
But in the above code "setclientcookies" has been set to "false". In my application (it is an existing application) this has already been set to "true". If I change this to "false" as mentioned in the above code then ColdFusion will not automatically send CFID and CFTOKEN cookies to client browser and we need to manually code CFID and CFTOKEN on the URL for every page that uses Session. Right???. And this will be headache.Right???. Or any other way to do this.
Your timely help is well appreciated.
Thanks in advance.

BKBK wrote:
Abdul L Koyappayil wrote:
BKBK wrote:
You can switch httponly / secure on and off, as we have done, for CFID and CFToken. However, Tomcat automatically switches JsessionID to 'secure' when it detects that the protocol is secure, that is, HTTPS.
I couldnt understand this. I mean how are you relating this with my question.
When Tomcat detects that the communication protocol is secure (that is, HTTPS), it automatically switches on the 'secure' flag for the J2EE session cookie, JsessionID. Tomcat is configured to do that. Coldfusion has no say in it. So, for JsessionID, 'secure' is automatically set to 'false' when HTTP is detected and automatically set to 'true' when HTTPS is detected.
     If this is the case then why I am getting below info for jsessionid (As you mentioned it should set with SECURE flag . Right???). Note that we are using web server - Apache vFabric .And the application that we are using is in https and there is no hit is going from https to http.
Name:
JSESSIONID
Content:
782BF97F50AEC00B1EBBF1C2DBBBB92F.xyz
Domain:
xyz.abc.pqr.com
Path:
Send for:
Any kind of connection
Accessible to script:
No (HttpOnly)
Created:
Wednesday, September 3, 2014 2:25:10 AM
Expires:
When the browsing session ends
BKBK wrote:
2]When I checked CF Admin->Server Settings->Memory Variables I found that J2EE SESSION has been set to YES. So does this mean that do we need to set HTTPOnly and SECURE flag for JSESSIONID only or for CF session cookies (CFID AND CFTOKEN ) as well ?.
Set HTTPOnly / Secure for the session cookies that you wish to use. Each cookie has its pros and cons. For example, the JsessionID cookie is more secure and more Java-interoperable than CFID/CFToken but, from the explanation above, it forbids the sharing of sessions between HTTP and HTTPS.
     I understood that setting thos flags (httponly/secure) is as per my wish. But my question was , is it necessary to set those flags forcf session cookies (cfid and cftoken) as we have enabled J2EE session in CF admin?. Or in other way as the session management is J2EE based do we need to set those flags for CF session cookies?.
BKBK wrote:
3]If I need to set HTTPOnly and SECURE flag for JSESSIONID , how can I do that.
It is sufficient to set the HTTPOnly only. As I explained above, Tomcat will automatically set 'secure' to 'true' when necessary, that is, when the protocol is HTTPS.
     I understood that it is sufficient to set httponly only.but how we will set it for jsessionid?. This is my question. Apache vFabric will alos set secure to true automatically. Any idea??

How to set up and configure AirPort Express for AirPlay and iTunes

Saw somewhere that supposedly there were some apple written guidlines on the above topic. I have searched all over for them. Anyone know where I can get a copy to read through. Just trying to educate myself a bit and sety up another room with access to itunes, radio, etc with high quality speakers and amp off my express.

Here you go ...
How to set up and configure AirPort Express for AirPlay and iTunes

How to set configuration flag

Similar Messages

Maybe you are looking for