How to set country field automatically when creating new customer??

Hi Gurus,
when customer number is entered in account identification, if there is no matching account, a new one is created. While creating , in the screen there is an country field and I want to set this field to a fixed value of our country. How can I do this??

Hi everybody,
I got a simple question. Can I use BADI: BADI_CRM_BP_UIU_DEFAULTS of Enhancement Spot CRM_UIU_BP_ENHANCEMENT
to make the country 'US' as a default value for component: ICCMP_BP_DETAIL (NOT: BP_HEAD)?
Component ICCMP_BP_DETAIL is Interaction Center.
If not which Badi or way I can use to make country 'US' as default value?
Best Regards
Oliver
Edited by: Oliver Schultze on Dec 9, 2010 4:33 PM

Similar Messages

How to make metadata fields required when creating folders

Hello all....
Related issue with SR 3-6472229431 and SR 3-6471130611.
We're using DIS 11.1.6 64-bits (2011_11_29 (rev 9756) 11.1.6.97) in a Windows 7 64-bits workstation (with UCM 11.1.1.5 in a Linux machine). The check-in of images to UCM goes fine.
I'm trying to make some metadata fields required when creating a folder. These fields are required when making a check-in, but not when creating folders.
Folders_g is enabled. DesktopTag too.
EDIT: Patch: 14695303 - WCC 11.1.1.5.0 BUNDLE ( MLR 16 ) NOV 6 2012 applied.
Is it possible?
Thanks for all.
Edited by: fgomes on 22/11/2012 03:24

After reading your response and rereading the original question a bit closer, the metadata prompting feature does not apply to creating new folders, only content.
Again, though, I think the focus here is in the wrong place. The metadata applied to a folder is intended to be ultimately applied to the content. You can build global rules that fire on submission of content to check if a field has a value, and throw an error if the value is empty.
If you expect users to create folders (and actually apply any metadata to the actual folder itself), you will be disappointed. Experience shows that users are not interested in that level of detail when creating content, let alone folders. Letting typical users create folders is a bad idea anyway, as they tend to create the same inefficient folder structures they previously created in file shares within Content Server.
If you need to tightly control folder attributes, you'll be better served by locking down the ability to create new folders. Otherwise you're looking at some type of customization. Keep in mind that you won't be able to customize the right click behavior of DIS. Any changes to DIS would have to be an enhancement request.

How to create stored procedures automatically when creating new company

I need to create a method in our add-on Business One application that will create stored procedures at the time we install the add-on (when the new company is created). Where would I store the SQL scripts, and what SAP Business One commands do I need to use to build the stored procedures into the new company database? Can someone give me an example of how to do this? We are coding in C#, but an example in visual basic would also be helpful if no one out there in forum land uses C#
Thanks,
Nancy Walk
[email protected]

Hi Nancy!
Of course are there people here that use C#
To solve your problem, create a routine in your add-on that checks at startup if the stored procedures are present. If they are not, create them. You can use the DI-API, or just add them directly to your database.
<i>Note: SAP does not like it when you play around directly in the SAP databases, and does not supply support for databases that are changed manually. You'd better use the DI-API...</i>
Hope it helps...
Grtz, Rowdy

How to add default associated groups when creating new site

Hi All,
I am trying to create a new subsite in sharepoint 2013 using CSOM (code is mentioned below). But no default groups (MEMBER, VISITOR, OWNER) are getting created in that site. When we try through UI we will got through a page "Set Up Groups
for this Site" where we can specify these details.. Is it possible to do the same (creating default groups together with the site creation) through CSOM or powershell.
CSOM code:
WebCreationInformation creation = new WebCreationInformation();
            creation.Url = "NewSubSite6";
            creation.Title = "NewSubSite6";
            creation.UseSamePermissionsAsParentSite = false;
            Web newWeb = clientContext.Web.Webs.Add(creation);
            //clientContext.Load(newWeb);
            clientContext.ExecuteQuery();
Regards,
Shahabas

Shahbas, here is the code:
private static void SetSecurityOnSubSite(ClientContext clientContext, ListItem item, bool confidential, Web newWeb)
try
if (confidential)
newWeb.BreakRoleInheritance(false, false);
clientContext.ExecuteQuery();
Group ownerGroup = default(Group); Group memberGroup = default(Group); Group visitorGroup = default(Group);
// web has unique permissions, so create default assosiated groups (owners, members, visitors)
if (!newWeb.GroupExists(newWeb.Title + " Owners"))
ownerGroup = newWeb.AddGroup(newWeb.Title + " Owners", "", true);
clientContext.Load(ownerGroup);
if (!newWeb.GroupExists(newWeb.Title + " Members"))
memberGroup = newWeb.AddGroup(newWeb.Title + " Members", "", false);
clientContext.Load(memberGroup);
if (!newWeb.GroupExists(newWeb.Title + " Visitors"))
visitorGroup = newWeb.AddGroup(newWeb.Title + " Visitors", "", false);
clientContext.Load(visitorGroup);
// executequery in order to load the groups if not null
clientContext.ExecuteQuery();
newWeb.AssociateDefaultGroups(ownerGroup, memberGroup, visitorGroup);
newWeb.AddPermissionLevelToGroup(newWeb.Title + " Owners", RoleType.Administrator);
newWeb.AddPermissionLevelToGroup(newWeb.Title + " Members", RoleType.Contributor);
newWeb.AddPermissionLevelToGroup(newWeb.Title + " Visitors", RoleType.Reader);
FieldUserValue userValueCreatedBy = item[Constants.Projects.CreatedBy] as FieldUserValue;
User createdByUser = clientContext.Web.EnsureUser(userValueCreatedBy.LookupValue);
clientContext.Load(createdByUser);
clientContext.ExecuteQuery();
UserCreationInformation createdByUserCI = new UserCreationInformation();
createdByUserCI.LoginName = createdByUser.LoginName;
ownerGroup.Users.Add(createdByUserCI);
clientContext.ExecuteQuery();
foreach (FieldUserValue userValue in item[Constants.Projects.ProjectTeam] as FieldUserValue[])
User user = clientContext.Web.EnsureUser(userValue.LookupValue);
clientContext.Load(user);
clientContext.ExecuteQuery();
UserCreationInformation userCI = new UserCreationInformation();
userCI.LoginName = user.LoginName;
memberGroup.Users.Add(userCI);
clientContext.ExecuteQuery();
catch (Exception)
throw;
Reference link:
http://sharepoint.stackexchange.com/questions/116682/how-to-create-a-group-in-a-subweb-using-csom
Thanks, Pratik Shah

How to drag transparent swatch when creating new custom tool panel in CC 2014

Hi guys. I'm having trouble dragging the transparent swatch over to a new panel I'm trying to create. Love the new feature, but not sure how to get this last crucial item on my toolbar:
Thanks for helping out!

thesergie wrote:
Or is the main toolbar not customizable (ie I can only create custom toolbars)?
Exactly.
Would be nice if it were ...

How do you shuffle the image order when creating a new slideshow in apterture 3? i would like to do this automatically when creating a new slideshow. i see how you do it when you just play a slideshow.

how do you shuffle the image order when creating a new slideshow in apterture 3? i would like to do this automatically when creating a new slideshow. i see how you do it with presets when you just play a slideshow, but i don't see an option to randomly shuffle the slide order when you create a new slideshow. i know you can sort it by different fields, but i want it to be random. thanks.

If you want to rearrange images in random order you can try an AppleScript:
retrieve a list of selected images from Aperture
shuffe the list properly
create an album in Aperture and add the images from the list to the album (make sure that the album set to be orederd manually)
Here is a sample script that shuffles the selected images and displays them in random order in Full Screen Mode:
on removeItem(ims, i)
-- remove the item at position "i" from a list ims
          if ims is {} then return {}
          if (length of ims is 1) then return {}
          if i < 2 then return rest of ims
          if (i = length of ims) then return (items 1 thru (i - 1) of ims)
          if i > (length of ims) then return ims -- should be error?
          return (items 1 thru (i - 1) of ims) & (items (i + 1) thru (length of ims) of ims)
end removeItem
on shuffle_items(ims)
-- shuffle the items of the list "ims" randomly
          local numitems, ims_shuffled, nextrest, nextpick, i
          set numitems to length of ims
          if length of ims < 2 then return ims
          set ims_shuffled to {}
          set nextrest to ims
          repeat until nextrest is {}
                    set i to (random number (numitems - 1)) + 1
                    set nextpick to item i of nextrest
                    set beginning of ims_shuffled to nextpick
                    set numitems to numitems - 1
                    set nextrest to removeItem(nextrest, i)
          end repeat
          return ims_shuffled
end shuffle_items
on shuffleIms()
-- retrieve the selected images from Aperture
-- and display them in random order in full screen mode
          local imageSel, shuffled, i
          tell application "Aperture"
activate
                    set imageSel to (get selection)
                    set shuffled to my shuffle_items(imageSel)
                    set fullscreen to true
                    if imageSel is {} then error "Please select some images."
                    repeat with i from 1 to count of shuffled
                              reveal {item i of shuffled}
delay 3 -- chnage that to the time you want
                    end repeat
                    set fullscreen to false
                    return shuffled
          end tell
end shuffleIms
shuffleIms()
Some more code snippets to go from here:
To create an album:
                    tell library 1
                              if not (exists album "shuffledAlbum") then
make new album with properties {name:"shuffledAlbum", image version:shuffled}
                              end if
                    end tell
And to add the images from the shuffled list to the album:
                    repeat with i from 1 to count of shuffled
                              duplicate item i of shuffled to album "shuffledAlbum"
                    end repeat
Regards
Léonie

How to get Manager id automatically when Employee Id is given.

How to get Manager id automatically when Employee Id is given.
1) I created a simple BO with two elements namely
1.Employee Id
2.Manager id
How to get employee's first name and last name?
And how will i get manager id automatic when i click employee id in element field.
Anbu.

Have you tried to use "APPS.FND_CONCURRENT" API?
http://etrm.oracle.com/pls/trm11510/etrm_pnav.show_object?c_name=FND_CONCURRENT&c_owner=APPS&c_type=PACKAGE
http://etrm.oracle.com/pls/trm11510/etrm_pnav.show_object?c_name=FND_CONCURRENT&c_owner=APPS&c_type=PACKAGE%20BODY
Thanks,
Hussein

How to set up TimeCapsule (4th) to create own private (wired) network behind Airport Express (5th) that is set up to join existing wifi-network of fritz adsl modem/router?

I work in an office building with free Wifi to connect to the Internet. I want to be able to use this internetconnection, but at the same time I want to shield of my own wired network.
I've made the following configuration:
- fritz adsl modem / router
- Airport Extreme (5th gen) set up to join existing wireless network (green light, works)
- Lan-cable from lan-port AE to wan-port TC (4th gen)
- Lan-cable from TC to Mac
- Lan-cable from TC to Printer
When I set my TC (network-settings) in bridge-mode everything works fine, but my Mac and Printer get an IP-address from the fritz modem / router and are visible to others.
I tried to set TC in NAT/DHCP-mode, but then I get the error message that I should set a static IP-adress for TC. When I set TC in DHCP-mode, it looses connection to the AE. I'm not sure what to do now. Does anyone know how to set up my TC and create my own private network and still be able to get on the internet?

Hajenius wrote:
Is there a better alternative? I'd rather not want to reset my TC every day.
You are using free internet.. so there is a price to pay.. that is convenience and non-ideal network setup.
The better alternative is to pay for your own connection. Then you are completely free of the possibility of others in the bullding seeing your connection. (as long as you secure the wireless).
But I think you are probably over worrying about public wifi.. if it is setup right.. ask the building admins.. it should be setup so each user cannot see another users connection. This is typical for most wifi setup and simply means you can see internet connection but nobody else on the connection. ie other wireless users.
Having a router with NAT makes it then more secure again and allows clients on your own network to interact with each other. But you can setup wireless to the free wifi for every client.. (depending on how many IP you are allowed).. and run a secondary network without internet access. This is easy for desktop etc where you have a wireless and a wired connection but less convenient for mobile devices.. unless you use a cloud connection and each client can link and share via that.
Have I made the explanation worse??
Think of it this way.. if you had 3 laptops.. all 3 could connect to the internet from the building wifi.. but they cannot talk to each other or share resources in local office. You can put resources out in the cloud, that can be shared.. but that adds traffic and most free services are not fast.
Now you can also plug all three into Time Capsule by ethernet.. and share local resources. Files, printers backup etc. This network is not connected to the internet at all. Each laptop has internet via free wifi and local connection.
For devices like iphones that have no ethernet or other method.. you could use local wireless and public wireless.. but in turns.. still the only advantage is less issues with double NAT.. if that causes problems.. then this is an alternative.

How to set Character field's Format Mask?

dear all,
how to set Character field's Format Mask?
i searched the forum and found the following, where can i use this code and how to change and set its format mask.
SRW.SET_FORMAT_MASK('mask');
Thanks
Muhammad Nadeem

Nadeem,
If you have database 10g, look into function REGEXP_REPLACE. Otherwise you can also try this (you might already know).
SELECT SUBSTR('CHHOCMIPO07020001', 1,2)||'-'||SUBSTR('CHHOCMIPO07020001' ,3,2)||'-'||
SUBSTR('CHHOCMIPO07020001' , 5,2)||'-'||SUBSTR('CHHOCMIPO07020001' , 7,3)||'-'||
SUBSTR('CHHOCMIPO07020001' , 10,2)||'-'||SUBSTR('CHHOCMIPO07020001' , 12,2)||'-'||
SUBSTR('CHHOCMIPO07020001' , 14,4)
FROM dual
CH-HO-CM-IPO-07-02-0001
If you have to use this at many places, create a function, pass the raw value, manipulate the string and return.
FS

How to set the field SKB1-FDLEV as requestred-entry in G/L Master data?

Hi All,
Could anyone tell me how to set the field SKB1-FDLEV as requestred-entry in G/L Master data?
Thanks
Gandalf

hi
Go to OB26
select Your criteria ( create, change or display)
double click on it
again double click on Bank/financial details
there you will find the Planning level make it require entry
save
with regards
ramanuja chary

How to set the field non-editable in the classical report..

Hi..
How to set the field non-editable in the classical report..

Hi experts,
For the component 'ICCMP_EMP_SRCH' there is a view 'BUPAEMPSEARCH' , which has 2 context nodes 'CUSTOMER' AND 'SEARCHEMPLOYEE' , i need to add the field 'NICKNAME' which is part of the 'CUSTOMER' context node on the search screen. Currrently all the fields on the screen screen are from the 'SEARCHEMPLOYEE' context node. when i did the configuration , the 'NICKNAME' field is greyed out . I have already generated the Getter ,Setter , GET_I, GET_M methods for the 'NICKNAME' field and the context node and controller class and context class are all active .
on debugging the GET_I method, i see that rv_disabled = 'TRUE' and the current = collection_wrapper->get_current( ) is returning empty value .
for this rv_disabled to be set false , the code below is not triggered since there is no value in current.
IF current->is_property_readonly(
'NICKNAME' ) = abap_false. "#EC NOTEXT
rv_disabled = 'FALSE'.
ENDIF.
when i check for other search fields of context node 'SEARCHEMPLOYEE' , all the fields are set to rv_disabled = 'FALSE'.
can anyone suggest how to approch this. iam i missing any binding between context nodes or any activations ?
The field properties are set as Input field and the display checkbox is not checked.

Country field mandatory when phone number is registered in BP creation

Hi all,
I have next question.
We are creating in IC Webclient Contact Persons not related to an account and even in configuration we put as "optional" country field, if we create them registering a phone number system shows message "country field is required".....do you know if there´s a way to put as optional or a default value to minimize this?...
Thanks in advance.
Gonzalo C.

Hi Gonzalo,
Telephone (and other communication data such as fax , email) can be of two tyeps :
1. Address dependent - needs you to first maintain the address If you delete the address, all the communication data maintained for this address is also deleted
2. Address independent. - does not need address. This data remains irrespective of the existence of any address.
In this case, you are attempting to default the address dependent telephone number - and this is not allowed in case you don't have an address( and since country is a mandatory field for address, you get the error )
The solution here is for you to simply create the telephone as an address independent number, in which case it is linked to the partner directly. This is how the link is maintained.
Address dependent comm data-
Find the address number from BUT020 for the partner, use this address number in ADR2 to get the address dependent tel num.
Address independent comm data-
Get the address number from BUT000 (field ADDRCOMM) . Use this address num in ADR2 to get the address indpependent tel num.
This will solve your problem.
Best Regards,
Rishu.

Can someone tell me how to set my name so when I send a text it shows up instead of my phone number

Can someone tell me how to set my name so when I send a text it shows up instead of my phone number

You can't do that. Only the sending number is transmitted by the carrier with an SMS message. If the recipient has you in their address book, with most smart phones and some others, the name will display, but that's a function of the phone on the receiving end.

How to set key fields in a Database view

Hi guru's
iam balaji,plz guide me with how to set key fields in a view.......that field is a non key field in the base table....
thanks in advance,
Balaji.S

take a look at this:
Diagnosis
    In the view, not all of the mandatory fields were included as key
    fields. The key of the view therefore is not unique.
System Response
    All the fields are regarded as key fields in order to guarantee that th
    key lengths are unique.
Procedure
    For views with a large number of fields, this could have a negative
    effect on the performance for the language construction described below
    In this case, all the mandatory key fields should be included in the
    view.
regards

How to get UTF-8 encoding when create XML using DBMS_XMLGEN and UTL_FILE ?

How to get UTF-8 encoding when create XML using DBMS_XMLGEN and UTL_FILE ?
Hi,
I do generate XML-Files by using DBMS_XMLGEN with output by UTL_FILE
but it seems, the xml-Datafile I get on end is not really UTF-8 encoding
( f.ex. cannot verifying it correct in xmlspy )
my dbms is
NLS_CHARACTERSET          = WE8MSWIN1252
NLS_NCHAR_CHARACTERSET     = AL16UTF16
NLS_RDBMS_VERSION     = 10.2.0.1.0
I do generate it in this matter :
declare
xmldoc CLOB;
ctx number ;
utl_file.file_type;
begin
-- generate fom xml-view :
ctx := DBMS_XMLGEN.newContext('select xml from xml_View');
DBMS_XMLGEN.setRowSetTag(ctx, null);
DBMS_XMLGEN.setRowTag(ctx, null );
DBMS_XMLGEN.SETCONVERTSPECIALCHARS(ctx,TRUE);
-- create xml-file:
xmldoc := DBMS_XMLGEN.getXML(ctx);
-- put data to host-file:
vblob_len := DBMS_LOB.getlength(xmldoc);
DBMS_LOB.READ (xmldoc, vblob_len, 1, vBuffer);
bHandle := utl_file.fopen(vPATH,vFileName,'W',32767);
UTL_FILE.put_line(bHandle, vbuffer, FALSE);
UTL_FILE.fclose(bHandle);
end ;
maybe while work UTL_FILE there is a change the encoding ?
How can this solved ?
Thank you
Norbert
Edited by: astramare on Feb 11, 2009 12:39 PM with database charsets

Marco,
I tryed to work with dbms_xslprocessor.clob2file,
that works good,
but what is in this matter with encoding UTF-8 ?
in my understandig, the xmltyp created should be UTF8 (16),
but when open the xml-file in xmlSpy as UTF-8,
it is not well ( german caracter like Ä, Ö .. ):
my dbms is
NLS_CHARACTERSET = WE8MSWIN1252
NLS_NCHAR_CHARACTERSET = AL16UTF16
NLS_RDBMS_VERSION = 10.2.0.1.0
-- test:
create table nh_test ( s0 number, s1 varchar2(20) ) ;
insert into nh_test (select 1,'hallo' from dual );
insert into nh_test (select 2,'straße' from dual );
insert into nh_test (select 3,'mäckie' from dual );
insert into nh_test (select 4,'euro_€' from dual );
commit;
select * from nh_test ;
S0     S1
1     hallo
1     hallo
2     straße
3     mäckie
4     euro_€
declare
rc sys_refcursor;
begin
open rc FOR SELECT * FROM ( SELECT s0,s1 from nh_test );
dbms_xslprocessor.clob2file( xmltype( rc ).getclobval( ) , 'XML_EXPORT_DIR','my_xml_file.xml');
end;
( its the same when using output with DBMS_XMLDOM.WRITETOFILE )
open in xmlSpy is:
<?xml version="1.0"?>
<ROWSET>
<ROW>
<S0>1</S0>
<S1>hallo</S1>
</ROW>
<ROW>
<S0>2</S0>
<S1>straޥ</S1>
</ROW>
<ROW>
<S0>3</S0>
<S1>m㢫ie</S1>
</ROW>
<ROW>
<S0>4</S0>
<S1>euro_</S1>
</ROW>
</ROWSET>
regards
Norbert

How to set country field automatically when creating new customer??

Similar Messages

Maybe you are looking for