How to set cursor in table control?

I have a table control (Screen 300) to display invoice number and amount. For some checks we have around 200 invoices to be displayed. When user enters the invoice number in invoice text box and click on OK, it should highlight the invoice number and amount row or set the cursor position.
I have another problem.
Screen 300 is being called from Screen 200. When the user clicks on OK in 300, 300 is getting closed. Acutally it should be displayed with Cusor position or highlighted row.
I appreaciate your help ... Thanks

I believe that you can use the SET CURSOR statement to do the first part of your requirement. Something like this should work:
SET CURSOR FIELD w_field LINE w_line.
Here's the info from SAP help:
Effect
: The cursor is positioned on the screen element whose name is contained in upper case in field. The data object field must be character-type and flat. The screen layout or a table control is scrolled in the display so that the screen element on which the cursor is positioned is visible. If the specified screen element is not found, the statement is ignored.
If the specified screen element is part of a table control or a step loop, the line of the table control or group of the step loop in which the cursor is positioned on the specified screen element must be specified using the addition LINE. For the data object line, the type i is expected. If there is no line or group for the value of line, or the addition LINE is not specified, the statement is ignored. The statement is also ignored if the addition LINE is specified and the screen element is not part of a table control or step loop.
I hope this helps.
- April King

Similar Messages

How to bring cursor in Table control??

Hi to all
How to bring cursor in Table control when entering into screen
can anyone tell me??? pls explain with example..
thanks
senthil

Hi,
Check the below code
data l_tc_name             like feld-name.
data l_tc_field_name       like feld-name.
get actual tc and column
get cursor field l_tc_field_name
             area l_tc_name.
Regards,
Vind

Set cursor on table control not working

Hi,
I have a screen with delivery number field on top with Get Data Button next to it. Once I click on Get Data, I want to get all the handling units and show them in a table control below and show the first line of that table control selected by default.
I m able to get the data but the cursor always goes back to the delivery number field.
I have the following code in PBO
Status & title for the screen
MODULE status_0100.
And in the module, the last lines are as follows
if sy-ucomm = 'GET'.
    s_vepo-sel = c_x.
    set cursor field 'TABLE1' line 1. "TABLE1 is name of the table control in screen
                                                  "painter
endif.
I debugged and saw that the line " set cursor field 'TABLE1' line 1." is indeed the last line which gets executed but still the cursor goes back to delivery number field and table row doesnt get selected.
Thanks for reading.

Try maintaining the "Cursor position" in the screen layout in Attributes tab with the field name that you want the default cursor position to be present.
Regards,
Shri Hari.

Set cursor in table control field

I have developed module using table control have done validation for one field on Enter key press.In change mode if user changes value in table control field and presses Enter key then system is showing Error message on status bar and table control gets gray out.
if user again hits Enter key then this error message clears and Table control is in Edit mode.
Here I wan that Cursor should go to same filed from which error message occurred.
I have written Get Cursor In PAI event and Set Cursor in PBO after Loop at table control. I tried Set cursor within Lop at Table control in PBO.
But cursor is not coming on that field of table control.
I have written set cursor as below:
Set Cursor Field itab-fieldname Line lineno Offset offsetval.
Here itab is internal table assigned to table control.
Please let me know why cursor is not setting on particular field on table control.

Hi Ganesh,
   A simpler way would be to include the fields of the table in a chain-endchain block.
in PAI section.
PROCESS AFTER INPUT.
loop at IT_FINAL.
    chain.
      field WA_FINAL-JOBCARD.
      field WA_FINAL-MATIDTAG.
      field WA_FINAL-VORNR.
      field WA_FINAL-ARBPL.
      field WA_FINAL-ZZPULLCONTNRQTY.
      field WA_FINAL-NOOFTAGS.
      field WA_FINAL-ROUTE_TO.
   module validate.
    endchain.
endloop.
you can issue your error messages in the module validate.
REgards,
Ravi

How to set colors to table control?

Hi all,
can we set colors to tables columns and rows?? How can we acieve this? Any help please
Thanks,
Madhan.

Hi All
thanks for your replies..
data tab type IF_main_view=>Elements_segment.
data line type IF_main_view=>Element_segment.
data node_info type ref to if_wd_context_node_info.
data attribute_info type wdr_context_attribute_info.
data attr_value type WDR_CONTEXT_ATTR_VALUE.
data wd_standard_cell type ref to cl_wd_table_standard_cell.
data component like line of cl_abap_structdescr=>components.
data wd_table_column type ref to cl_wd_table_column.
node_info = lo_nd_segment->get_node_info( ).
attribute_info = node_info->get_attribute( 'CELL_DESIGN' ).
if component-name = 'SEGMENT'.
wd_standard_cell->set_cell_design( CL_WD_ABSTR_MASTER_TABLE_COL=>E_CELL_DESIGN-BADVALUE_MEDIUM ).
endif.
i am trying to set color for some colomns, but i am not getting any colors??? anything wrong in this.. please help
thanks,
Madhan.

Set the cursor on table control

Hi All,
I am trying to create a table control.
Creation of table control is fine and i can update and save the records..But i am facing some strange problems.
When i close my program and rerun it, the Cursor will be position on the default field of last run.
How can we position the cursor on table control..Say to a particular row or columns?
Also i am not able to interpret the meaning of
Loop at itab with control control name cursor top_line/current_line.
Does this means that if you use top_line, cursor will be placed at the top line and when you use current_line , it will be placed at current line?
Regards
Miesh

Hi,
Check this link for sample code for Table Control
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=/library/webas/abap/abapCodeSamples/TableControlin+ABAP.pdf
http://members.aol.com/_ht_a/skarkada/sap/table_control/table_control.htm
Re: Table Control
Thanks & Regards,
Judith.
Message was edited by: Judith Jessie Selvi

How to populate data in table control .

hi all,
i put matnr no. in screen no. 103
validation is done at that screen only.
now when i want to modify dat record
when i put matnr no. at screen 103
so how i will get all data of dat number to table control screen.

Hi Darshan,
Here is a detailed description of how to update data in table controll.
Updating data in table control
The ABAP language provides two mechanisms for loading the table control with data from the internal table and then storing the altered rows of the table control back to the internal table.
Method 1: Read the internal table into the Table Control in the screenu2019s flow logic. Used when the names of the Table Control fields are based on fields of the internal table.
Method 2: Read the internal table into the Table Control in the module pool code. Used when the names of the Table Control fields are based on fields of the database table.
Method 1 (table control fields = itab fields)
In the flow logic we can read an internal table using the LOOP statement. Define the reference to the relevant able control by specifying WITH CONTROL <ctrl>
Determine which table entry is to be read by specifying CURSOR <ctrl>-CURRENT_LINE.
After the read operation the field contents are placed in the header line of the internal table. If the fields in the table control have the same name as the internal they will be filled automatically. Otherwise we need to write a module to transfer the internal table fields to the screen fields.
We must reflect any changes the user makes to the fields of the table control in the internal table otherwise they will not appear when the screen is redisplayed after PBO processing, (eg, after the user presses Enter or scrolls) However, this processing should be performed only if changes have actually been made to the screen fields of the table control (hence the use of the ON REQUEST)
PROCESS BEFORE OUTPUT.
LOOP AT ITAB_REG WITH CONTROL TCREG
CURSOR TCREG-CURRENT_LINE.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP AT ITAB_REG.
MODULE MODIFY_ITAB_REG.
ENDLOOP.
MODULE MODIFY_ITAB_REG INPUT.
MODIFY ITAB_REG INDEX TCREG-CURRENT_LINE.
ENDMODULE.
Method 2 (table control fields = dict. fields)
If using a LOOP statement without an internal table in the flow logic, we must read the data in a PBO module which is called each time the loop is processed.
Since, in this case, the system cannot determine the number of internal table entries itself, we must use the EXIT FROM STEP-LOOP statement to ensure that no blank lines are displayed in the table control if there are no more corresponding entries in the internal table.
PROCESS BEFORE OUTPUT.
LOOP WITH CONTROL TCREG.
MODULE READ_ITAB_REG.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP WITH CONTROL TCREG.
CHAIN.
FIELD: ITAB_REG-REG,
ITAB_REG-DESC.
MODULE MODIFY_ITAB_REG
ON CHAIN-REQUEST.
ENDCHAIN.
ENDLOOP.
MODULE READ_ITAB_REG OUTPUT.
READ TABLE ITAB_REG INDEX TCREG-CURRENT_LINE.
IF SY-SUBRC EQ 0.
MOVE-CORRESPONDING ITAB_REREG TO TCREG.
ELSE.
EXIT FROM STEP-LOOP.
ENDIF.
ENDMODULE.
MODULE MODIFY_ITAB_REG INPUT.
MOVE-CORRESPONDING TCREG TO ITAB_REG.
MODIFY ITAB_REG INDEX
TCREG-CURRENT_LINE.
ENDMODULE.
Updating the internal table
Method 1
PROCESS AFTER INPUT.
LOOP AT ITAB_REG.
CHAIN.
FIELD: ITAB_REG-REG,
ITAB_REG-DESC.
MODULE MODIFY_ITAB_REG ON CHAIN-REQUEST.
ENDCHAIN.
ENDLOOP.
MODULE MODIFY_ITAB_REG INPUT.
ITAB_REG-MARK = u2018Xu2019.
MODIFY ITAB_REG INDEX TCREG-CURRENT_LINE.
ENDMODULE.
Method 2
PROCESS AFTER INPUT.
LOOP WITH CONTROL TCREG.
CHAIN.
FIELD: TCREG-REG,
TCREG-DESC.
MODULE MODIFY_ITAB_REG ON CHAIN-REQUEST.
ENDCHAIN.
ENDLOOP.
MODULE MODIFY_ITAB_REG INPUT.
MOVE-CORRESPONDING TCREG TO ITAB_REG.
ITAB_REG-MARK = u2018Xu2019.
MODIFY ITAB_REG INDEX TCREG-CURRENT_LINE.
ENDMODULE.
Updating the database
MODULE USER_COMMAND_100.
CASE OK_CODE.
WHEN u2018SAVEu2019.
LOOP AT ITAB-REG.
CHECK ITAB_REG-MARK = u2018Xu2019.
MOVE-CORRESPONDING ITAB_REG TO TCREG.
UPDATE TCREG.
ENDLOOP.
WHEN u2026
u2026
ENDCASE.
ENDMODULE.
Hope this will solve your problem.
Regards,
Pavan.
Edited by: PAVAN CHANDRASEKHAR GANTI on Aug 3, 2009 12:48 PM

Hi All, How we can handle a table control in bdc - in detail its urgent pls

Hi All, How we can handle a table control in bdc - in detail its urgent. Please send me the explanation in detail.
Thanks&regards.
Bharat

hi,
Create Table Control
Step 1 (Create new structure for table control)
Type is name of structure (ZTC_EKKO) and press create
Step 2 (Create Program)
Goto transaction SE80(Object Navigator) -> Repository Browser -> Program.
Enter your program name, please ensure that is begins with SAPMZ as this is a module pool (dialog program).
Press enter to create, and press yes!
Ensure that you create a top include, and press Enter.
Accept the name created for the top include.
Press Enter.
Press Save
Step 3 (Create TOP include)
Double click on the top include and enter following ABAP code:
Tables: ZTC_EKKO.
controls: tc100 type tableview using screen 100.
data: ok_code type sy-ucomm.
data: it_ekko type standard
table of ZTC_EKKO initial size 0,
wa_ekko type ZTC_EKKO.
data: ok_code type sy-ucomm.
Press Save and Activate
Step 4 (Create screen)
Right click the program to create a screen 100 for the dialog. Enter Short description, set screen type to Normal and enter 0 or blank into Next screen. Then move to Element List tab and enter the OK code as OK_CODE (i.e. the same as what you declared in the top include with data: ok_code type sy-ucomm).
Step 5 (Create table control)
Press the Layout button to bring up the screen painter editor.
Press table control button and drag it on to the screen, enter the name of table control created in TOP include (TC100). Now press the yellow button for attributes and set the table control as below options
Step 6 (Populate table control )
Press the orange button (Fields). On the next screen enter ZTC_EKKO and press the Get from Dict button. Select the fields you want (all) and press enter. Now drag them onto your Table Control.
Below is the result, there will been syntax errors if we check now! So Save and go back into the flow logic tab.
Step 7 (Create flow control )
Within the flow logic of screen 100 and create two modules, one to select the data from the database and the other to move the selected fields into the table control. Also insert the two loop statements to populate and retrieve the lines of the table control.
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
module data_retrieval.
loop at it_ekko into wa_ekko with control TC100.
module populate_screen.
endloop.
PROCESS AFTER INPUT.
loop at it_ekko.
endloop.
MODULE USER_COMMAND_0100.
Double click the module data_retrieval to create and click yes to get past the popup. Ensure that a new include is created to hold all the PBO modules (default). Press enter.
Select 10 rows of data from the EKKO table and load into the internal table it_ekko. Go back to the flow logic to load this data into the Table Control.
check this one
REPORT ZCALL_TRANS_TAB1 .
TABLES: LFA1,LFBK,lfb1.
data: BEGIN OF it_vendor occurs 0,
LIFNR LIKE LFA1-LIFNR,
bukrs like lfb1-bukrs,
END OF it_vendor.
DATA: BEGIN OF IT_BANK occurs 0,
LIFNR LIKE LFA1-LIFNR,
BANKS LIKE LFBK-BANKS,
BANKL LIKE LFBK-BANKL,
BANKN LIKE LFBK-BANKN,
koinh like lfbk-koinh,
END OF IT_BANK.
data: it_bdcdata like bdcdata occurs 0 with header line.
data: it_messages like bdcmsgcoll occurs 0 with header line.
*selection screen.
selection-screen: begin of block b1 with frame.
parameters: p_file like rlgrap-filename default 'c:/vendor.txt'
obligatory.
parameters: p_file1 like rlgrap-filename default 'c:/xyz.txt'
obligatory.
selection-screen: end of block b1.
*at selection screen.
at selection-screen on value-request for p_file.
perform f4_help using p_file.
at selection-screen on value-request for p_file1.
perform f4_help1 using p_file1.
*start of selection
start-of-selection.
*******uploading file
perform upload_file using p_file P_FILE1.
******open session.
perform populate_data.
*& Form f4_help
form f4_help using p_p_file.
data: l_file type ibipparms-path.
call function 'F4_FILENAME'
importing
file_name = l_file.
p_file = l_file.
endform. " f4_help
*& Form POPULATE_DATA
form populate_data .
DATA: L_STRING TYPE STRing.
DATA: L_COUNTER(2) TYPE n.
loop at it_vendor.
perform bdc_dynpro using 'SAPMF02K' '0106'.
perform bdc_field using 'BDC_CURSOR'
'RF02K-D0130'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RF02K-LIFNR'
it_vendor-lifnr.
perform bdc_field using 'RF02K-BUKRS'
it_vendor-bukrs.
perform bdc_field using 'RF02K-D0130'
'X'.
perform bdc_dynpro using 'SAPMF02K' '0130'.
perform bdc_field using 'BDC_CURSOR'
'LFBK-bankn(03)'.
perform bdc_field using 'BDC_OKCODE'
'=UPDA'.
*********bank details
CLEAR l_COUNTER.
LOOP AT IT_BANK WHERE LIFNR = IT_VENDOR-LIFNR.
l_COUNTER = l_COUNTER + 1.
clear l_string.
CONCATENATE 'lfbk-banks(' l_counter ')' into l_string.
perform bdc_field using l_string
it_bank-banks.
clear l_string.
CONCATENATE 'lfbk-bankl(' l_counter ')' into l_string.
perform bdc_field using l_string
it_bank-bankl.
clear l_string.
CONCATENATE 'lfbk-bankn(' l_counter ')' into l_string.
perform bdc_field using l_string
it_bank-bankn.
endloop.
******CALL TRANSACTION.
call transaction 'FK02' using it_bdcdata mode 'A'
messages into it_messages.
write:/ sy-subrc.
perform format_messages.
clear it_bdcdata.
refresh it_bdcdata.
endloop.
endform. " POPULATE_DATA
*& Form FORMAT_MESSAGES
form format_messages .
data: l_msg(100).
loop at it_messages.
call function 'FORMAT_MESSAGE'
exporting
id = it_messages-msgid
lang = sy-langu
no = it_messages-msgnr
v1 = it_messages-msgv1
v2 = it_messages-msgv2
v3 = it_messages-msgv3
v4 = it_messages-msgv4
importing
msg = l_msg
exceptions
not_found = 1
others = 2
write:/ l_msg.
endloop.
endform. " FORMAT_MESSAGES
*& Form bdc_dynpro
form bdc_dynpro using value(p_program)
value(p_screen).
it_bdcdata-program = p_program.
it_bdcdata-dynpro = p_screen.
it_bdcdata-dynbegin = 'X'.
append it_bdcdata.
clear it_bdcdata.
endform. " bdc_dynpro
*& Form bdc_field
form bdc_field using value(p_fnam)
value(p_fval).
it_bdcdata-fnam = p_fnam.
it_bdcdata-fval = p_fval.
append it_bdcdata.
clear it_bdcdata.
endform. " bdc_field
*& Form upload_file
form upload_file using p_p_file
p_p_file1.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
CODEPAGE = ' '
FILENAME = P_P_FILE
FILETYPE = 'DAT'
HEADLEN = ' '
LINE_EXIT = ' '
TRUNCLEN = ' '
USER_FORM = ' '
USER_PROG = ' '
DAT_D_FORMAT = ' '
IMPORTING
FILELENGTH =
TABLES
data_tab = IT_VENDOR
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
NO_AUTHORITY = 10
OTHERS = 11
IF sy-subrc <> 0.
MESSAGE I000(ZZ) WITH 'UNABLE TO UPLOAD'.
STOP.
ENDIF.
*******UPLOADING BANK DETAILS
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
CODEPAGE = ' '
FILENAME = P_P_FILE1
FILETYPE = 'DAT'
HEADLEN = ' '
LINE_EXIT = ' '
TRUNCLEN = ' '
USER_FORM = ' '
USER_PROG = ' '
DAT_D_FORMAT = ' '
IMPORTING
FILELENGTH =
TABLES
data_tab = IT_BANK
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
NO_AUTHORITY = 10
OTHERS = 11
IF sy-subrc <> 0.
MESSAGE I000(ZZ) WITH 'UNABLE TO UPLOAD'.
STOP.
ENDIF.
endform. " upload_file
*& Form f4_help1
-->P_P_FILE1 text
form f4_help1 using p_p_file1.
data:l_file1 type ibipparms-path.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
FILE_NAME = l_file1.
p_file1 = l_file1.
endform. " f4_help1
http://sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
Regards,
Sankar

How to create bdc with table control

hi all.
please some body tell me how to create bdc with table control
or suggest any www with screen shots
thanks in advance ,
aparna

Hi AParna,
Its very Simple.
ALl you have to do is set up a counter based on the number of lines in the tabke. when the counter reaches the number of lines in the table hit the next page button which is at the top of every screen in SAP.
Please refer to the following BDC program I had developed using Table control,
this is for ME01 transaction.
LOOP AT T_EORD_HED.
    SELECT SINGLE * FROM MARA WHERE MATNR = T_EORD_HED-MATNR.
    IF SY-SUBRC = 0.
      PERFORM BDC_DYNPRO      USING 'SAPLMEOR' '0200'.
      PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                    'EORD-MATNR'.
      PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                    '/00'.
      PERFORM BDC_FIELD       USING 'EORD-MATNR'
                                    T_EORD_HED-MATNR.       "'58335'.
      PERFORM BDC_FIELD       USING 'EORD-WERKS'
                                    T_EORD_HED-WERKS.       "'0253'.
      L_COUNT = 1.
      LOOP AT T_EORD WHERE MATNR = T_EORD_HED-MATNR
                       AND WERKS = T_EORD_HED-WERKS.
        SELECT SINGLE * FROM LFA1 WHERE LIFNR = T_EORD-LIFNR.
        IF SY-SUBRC = 0.
* Look into the if condition below
          IF L_COUNT = 010.
            L_COUNT = 1.
            PERFORM BDC_DYNPRO      USING 'SAPLMEOR' '0205'.
            PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'EORD-MATNR'.
            PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                   '=NS'.
            L_COUNT = L_COUNT + 1.
          ENDIF.
          PERFORM BDC_DYNPRO      USING 'SAPLMEOR' '0205'.
          PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                        'EORD-AUTET(01)'.
          PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                        '/00'.
          CONCATENATE 'EORD-VDATU' '(' L_COUNT ')' INTO OPR_FIELD.
          WRITE SY-DATUM TO T_EORD-VDATU.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        T_EORD-VDATU.
          CONCATENATE 'EORD-BDATU' '(' L_COUNT ')' INTO OPR_FIELD.
          WRITE T_EORD-BDATU TO V_BDATU.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        V_BDATU.
          CONCATENATE 'EORD-LIFNR' '(' L_COUNT ')' INTO OPR_FIELD.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        T_EORD-LIFNR.
          CONCATENATE 'EORD-EKORG' '(' L_COUNT ')' INTO OPR_FIELD.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        '0001'.
          CONCATENATE 'EORD-RESWK' '(' L_COUNT ')' INTO OPR_FIELD.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        T_EORD-RESWK.
          WRITE T_EORD-MEINS TO V_MEINS.
          CONCATENATE 'EORD-MEINS' '(' L_COUNT ')' INTO OPR_FIELD.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        V_MEINS.
*          CONCATENATE 'EORD-EBELN' '(' L_COUNT ')' INTO OPR_FIELD.
*          PERFORM BDC_FIELD       USING 'OPR_FIELD'
*                                        T_EORD-EBELN.
          CONCATENATE 'EORD-EBELP' '(' L_COUNT ')' INTO OPR_FIELD.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        T_EORD-EBELP.
          IF T_EORD-FLIFN NE SPACE OR T_EORD-FRESW NE SPACE OR
             T_EORD-FEBEL NE SPACE.
            CONCATENATE 'RM06W-FESKZ' '(' L_COUNT ')' INTO OPR1_FIELD.
            PERFORM BDC_FIELD       USING OPR1_FIELD
                                          'X'.
          ENDIF.
          IF T_EORD-NOTKZ <> ''.
            CONCATENATE 'EORD-NOTKZ' '(' L_COUNT ')' INTO OPR_FIELD.
            PERFORM BDC_FIELD       USING OPR_FIELD
                                          'X'.
          ENDIF.
          CONCATENATE 'EORD-AUTET' '(' L_COUNT ')' INTO OPR_FIELD.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        T_EORD-AUTET.
          L_COUNT = L_COUNT + 1.
        ENDIF.
      ENDLOOP.
      PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                    'EORD-MATNR'.
      PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                    '=BU'.
      CALL TRANSACTION 'ME01' USING I_BDCDATA
                    MODE UP_MODE
*                     optIONS FROM l_opt
                    MESSAGES INTO I_BDCMSGCOLL.
      PERFORM FORMAT_OUTPUT.
    ENDIF.
ENDLOOP.

How to transfer data in table control in bdc

hi
how to transfer data in table control in bdc . I need the theory regarding this
bye

Hi,
just check in the forum , there is many threads available to ur questions.
Table control in BDC
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
You can even refer to these related threads
bdc table control
Re: table control in bdc
table control in BDC
Reward if helpful.
Thanks
Naveen khan

How to insert data into table control

hi experts,,
i have inserted data into data base table through table control .
now i want to insert data into table control through database table.
how to delete data from table control for selected row

Hi
go through this link.
http://www.****************/Tutorials/ABAP/TableControl/Demo.htm

How to disable fields in Table control???

Hi
How to disable fields in Table control??? I want to disable particular row in table control when enter datas are correct.lets take as example ME41 or ME51 table control.
Can anyone tell how to do disable in this table control
Points will be rewarded if its helpful.
Thanks
senthil

If you want to disable the row then you can use
in pbo module create a module in side loop,
loop at itab with control tc.
module change_screen.
endloop.
in module,,,,,
loop at screen.
if condition.
screen-input = 0.
modify screen.
endif.
endloop.
Regards
Vijay

How to set optional for table structure in functiona module

hi experts,
as i have small doubt regarding
while publishing web service by using rfc where i am unable to set optional for table structure i am able to put optional for import parameters may i know how to set optional for table structure ....
reagrds prabhanjan

Ignoring the TABLES/CHANGING/EXPORTING argument...
while publishing web service by using rfc where i am unable to set optional for table structure i am able to put optional for import parameters may i know how to set optional for table structure
Why not? There's no issue with marking a TABLES interface parameter with 'Optional' and publishing the function module or function group as a web service...

How to set the column table so it can not be moved !

how to set the column table so it can not be moved !

m_table.getTableHeader().setReorderingAllowed(false);
m_table.getTableHeader().setResizingAllowed(false);

How can i extend the table control while transfering the data

hi
how can i extend the table control while transfering the data.

Hi,
For table control we have to handle the page down (P+, or what ever function codes are assigned to that activity) activity with our coding.
Just check out this code:
This is the bdc to update the XK01 transaction code (Vendor Creation).
Here we will use table controls for bankings. Here Iam sending the coding and text files.
Coding
REPORT zprataptable2
NO STANDARD PAGE HEADING LINE-SIZE 255.
DATA : BEGIN OF itab OCCURS 0,
i1 TYPE i,
lifnr LIKE rf02k-lifnr,
bukrs LIKE rf02k-bukrs,
ekorg LIKE rf02k-ekorg,
ktokk LIKE rf02k-ktokk,
anred LIKE lfa1-anred,
name1 LIKE lfa1-name1,
sortl LIKE lfa1-sortl,
land1 LIKE lfa1-land1,
akont LIKE lfb1-akont,
fdgrv LIKE lfb1-fdgrv,
waers LIKE lfm1-waers,
END OF itab.
DATA : BEGIN OF jtab OCCURS 0,
j1 TYPE i,
banks LIKE lfbk-banks,
bankl LIKE lfbk-bankl,
bankn LIKE lfbk-bankn,
END OF jtab.
DATA : cnt(4) TYPE n.
DATA : fdt(20) TYPE c.
DATA : c TYPE i.
INCLUDE bdcrecx1.
START-OF-SELECTION.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\first1.txt'
filetype = 'DAT'
TABLES
data_tab = itab.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\second.txt'
filetype = 'DAT'
TABLES
data_tab = jtab.
LOOP AT itab.
PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RF02K-LIFNR'
itab-lifnr.
PERFORM bdc_field USING 'RF02K-BUKRS'
itab-bukrs.
PERFORM bdc_field USING 'RF02K-EKORG'
itab-ekorg.
PERFORM bdc_field USING 'RF02K-KTOKK'
itab-ktokk.
PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-LAND1'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFA1-ANRED'
itab-anred.
PERFORM bdc_field USING 'LFA1-NAME1'
itab-name1.
PERFORM bdc_field USING 'LFA1-SORTL'
itab-sortl.
PERFORM bdc_field USING 'LFA1-LAND1'
itab-land1.
PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-KUNNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
cnt = 0.
LOOP AT jtab WHERE j1 = itab-i1.
cnt = cnt + 1.
CONCATENATE 'LFBK-BANKS(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-banks.
CONCATENATE 'LFBK-BANKL(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankl.
CONCATENATE 'LFBK-BANKN(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankn.
IF cnt = 5.
cnt = 0.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=P+'. " Page down activity
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(02)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
ENDIF.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0210'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-FDGRV'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFB1-AKONT'
itab-akont.
PERFORM bdc_field USING 'LFB1-FDGRV'
itab-fdgrv.
PERFORM bdc_dynpro USING 'SAPMF02K' '0215'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-ZTERM'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0220'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB5-MAHNA'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0310'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFM1-WAERS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFM1-WAERS'
itab-waers.
PERFORM bdc_dynpro USING 'SAPMF02K' '0320'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-LIFNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPLSPO1' '0300'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=YES'.
PERFORM bdc_transaction USING 'XK01'.
ENDLOOP.
PERFORM close_group.
**Flat files for the above code***
Intial screen data file.
1 63190 0001 0001 0001 mr bal188 b in 31000 a1 inr
2 63191 0001 0001 0001 mr bal189 b in 31000 a1 inr
Table control Data:
1 in sb 11000
1 in sb 12000
1 in sb 13000
1 in sb 14000
1 in sb 15000
1 in sb 16000
1 in sb 17000
1 in sb 18000
1 in sb 19000
1 in sb 20000
1 in sb 21000
1 in sb 22000
2 in sb 21000
2 in sb 22000
Regards,
Kumar.

How to set cursor in table control?

Similar Messages

Maybe you are looking for