How to set default path for file open in SQL Developer

Hi,
I am new to Oracle SQL Developer. Everytime when I open a file, it will default to the install directory. It is hurtingmy hand because I have to click back to the folder where I put my sql statements.
Is there any way to set the Home or Work button to point to the location I like? or add anther button to point to my folder? I just don't want to click 5 to 10 times to open a file.

There are a few things. One is that you can set a working directory for any files you run in the SQL Worksheet i.e. @myfile.sql will pick up this directory.
You can also set a preference for exporting files.
Also if you use File -> Open, it should remember where you were the last time, so you hunt the first time, then it remembers for the next time. There is a bug for ctrl-O that always goes back to the original directory, but that has been fixed for the next patch release, so ctrl -O will also remember where you were last.
The differences here are because we are dependent on the IDE from JDeveloper, and so we don't have full control over the Save and Open dialogs. We are aware of this frustration and are planning to change this for a future release.
Regards
Sue

Similar Messages

How to set default permissions for files and folders

We have mac and windows computers on a network where we use Mac OSX Server 10.4 to share files. When files are created on windows computer, no problem, all users can read/write these files. However on our 2 macs (1 10.3 and 1 10.4), other users are blocked from using the files, only the owner has "read/write", group and others are "read only". As far as I can tell, file sharing is turned on ok in Workgroup Manager for the folders we share files from. How can we establish sharing for all users on our network?

Niel's suggestion is good. You might also try posting your question in the Tiger Server forums. I'm sure Tiger Server has several ways of dealing with this.

How do I set the default folder for file - open file... ?

When I save a file, photo, etc., the default folder for OPENING a file becomes the last folder I SAVED to - even after closing and reopening Firefox. Is there a way to maintain the same default folder for opening files?
Thanks.

Originally posted by: kwarner.uneedspeed.net
Well... I found over 200 bugs none of which seemed to talk about setting
the default folder. I probably missed the relevant bug in the spew.
I ask a question here as a last resort -- after I've done what I think
is an appropriate search for answers.
But thanks for your help in any case.
Daniel Megert wrote:
> DemonDuck wrote:
>
>> When I need to open a file not in the workspace, I use File -> Open File.
>>
>> But the default folder it opens is in C:\Documents and
>> Setting\Administrator
>>
>> I would like File -> Open File to first open in someplace more
>> reasonable -- like the workspace.
>>
>> How do I set the default folder for File -> Open File ????
>
>
> Is your '?' key broken? Check bugzilla there's a feature request
> regarding your question.
>
> Dani

How to set default view for preview?

Every time I open a PDF using Preview I have to set the view to 'thumbnails', then 'two pages up', then adjust the zoom. Complete waste of time.
Anyone know how to set defaults so that it opens in a predictable way?
thanks,

I customized my Toolbar to look like the following. Click the middle button that has the 1 circled. That tells Preview to remember to display pages at actual size (100%). Every file that I open now displays at 100%.

How to set default values for boolean columns

I'm trying to deploy some content types and columns into a site with a feature. All it's ok, except that I'm trying to set a default value for boolean columns with no success.
I've tried to set default value at column level:
<Field ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DisplayName="Se publican noticias en español"
Type="Boolean" Hidden="FALSE" Group="Columnas ShaCon" >
<Default>TRUE</Default>
</Field>
and at content type level:
<FieldRef ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DefaultValue="TRUE" Required="TRUE" />
But in any case, when i create a new item with this content type, default value is applied.
Can anyone tell how to set default values for boolean columns?
Thanks in advance,
Regards,
Sergio

In the field definition you can set
<Default>1</Default>
or
<Default>0</Default>
How to set the default value Null?

How to Set default value for taxonomywebtagging control with terms and nested terms

Hi,
I have created taxonomy control in custom aspx page and I am able to select terms but I am trying to setup default value to that control.
Can anybody let me know how to set the default value for TaxonomyWebTagging control in custom.aspx page with nested terms?
Any help would be greatly apprecited.
Control code in aspx page:
<td>
<asp:Label runat="server" ID="lblLanguages">Field A: </asp:Label><asp:Label runat="server" ID="rfvlblLanguages" CssClass="errorMsg" ForeColor="Red">*</asp:Label>
</td>
<td>
<Taxonomy:TaxonomyWebTaggingControl ID="term" Width="385px" runat="server" /></td>Mapping metedata code:TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
//Set the Business Unit Field
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GROUPName"];
TermSet termSet = group.TermSets["TERMSETNAME"];
Term term = termSet.Terms["TermA"];
Guid termGuid = term.Id;
term.SspId.Add(termStore.Id);
term.TermSetId.Add(termSet.Id);
term.AllowFillIn = true;
term.AnchorId = countryGuid;
term.IsMulti = true;
Thank you.
AA.

Hi,
According to your description, you want to set default value for TaxonomyWebTaggingControl.
I have a test in my environment. It could be achieved by setting the Text Property of TaxonomyWebTaggingControl.
Here is the code snippet:
TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GroupA"];
TermSet termSet = group.TermSets["A"];
Term term = termSet.Terms["A1"];
TaxonomyWebTaggingControl1.SspId.Add(termStore.Id);
TaxonomyWebTaggingControl1.SSPList = termStore.Id.ToString();
TaxonomyWebTaggingControl1.TermSetId.Add(termSet.Id);
TaxonomyWebTaggingControl1.TermSetList = termSet.Id.ToString();
TaxonomyWebTaggingControl1.AllowFillIn = true;
TaxonomyWebTaggingControl1.IsAddTerms = true;
TaxonomyWebTaggingControl1.IsMulti = false;
TaxonomyWebTaggingControl1.Text = string.Format("{0}|{1}", term.Name, term.Id.ToString());
Here is a detailed article for your reference:
http://blog.bugrapostaci.com/2010/09/23/taxonomywebtaggingcontrol-sharepoint/
Feel free to Reply the test result.
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Patrick Liang
TechNet Community Support

How to set local path for load library

Hi,
How do i set local path for native dll as i dont want to set the path in the environment variable.
can i do like this
System.loadLibrary("c:\abc");
Thanks

I believe that System.load() does exactly the same thing, but accepts fully qualified filenames. So give that a try.
Failing that.... maybe you can add -Djava.library.path=
to your command line to explicitely override the path set ?
regards,
Owen

How to set default language for Portal?

Hi All,
We use EP6.
Default language is not defined and therefore is being set by the browser's language.
Where do I set default language for all users?
(I don't want that the users will be able to change it by themselves by browser/EU role).
I tried to set the "request.mandatorylanguage" and
"request.mandatorycountry" in prtDefault.properties but it didn't help.
Thanks,
Omri

Hi Omri,
are those to parameters
request.defaultlanguage=...
request.defaultcountry=...
set in the prtDefault.properties, and the J2EE Server restarted after the change?
Check out this thread and the link given there for more info: HOW to define the default language in the portal
Hope this helps,
Robert

How to set default time for appointment

When I had snow leopard, the default time for length of an appointment was one hour. I upgraded to Lion and now the default time is many hours. Can't seem to find the area to change the default. Keith

Hello User,
Check this:-
Sasi Nagireddy: How to Set Default Time Zone for all Users in OBIEE?
Thanks,
Sasi Nagireddy..

Java files open in SQL Developer instead of JDeveloper

JDEV 10.1.3
Windows XP
When I double click a java file, it opens in SQL Developer instead of JDeveloper.
When I right click a java file, and select 'Open With'->jdeveloper, the java file always opens in SQL Developer instead of JDeveloper.
I've tried browsing and choosing all the different executables: jdevw.exe, jdev.exe, jdeveloper.exe. No luck on any of them.
Any help here? Thanks!

Thanks, but that didn't work. I noticed that the "open" action for java file extension is, in fact, set to use the jdeveloper.exe (I also tried jdev.exe and jdevW.exe).
Note: even if I run the jdeveloper.exe on the command line, with a java file as the argument, the java file still opens in SQL Developer, if it is running. (Otherwise it uses JDeveloper)
It's as if JDeveloper and SQL Developer are somehow coupled in the opening of files.

How to set default program for pdf files

I was wondering if anyone knows how to change the default program for opening a file type. For example I would like to set Adobe Acrobat as my default program for opening pdf files instead of preview
thanks

Hi and Welcome to Apple Discussions
Control-click a pdf file and choose "Get Info". In the Info window choose which application to open the file with and then click on the "change all" button. Voila!
Matthew Whiting

How to set default value for html:file in struts

hi
i am working on an application using struts situation is i am using the
<html:file property="" /> to allow the user to upload file. but i need that a default file should be set so that even if the user donot click browse ie the user wish to upload that default file the default file get uploaded on page submition. Is it possible to set any default value for html:file ...if yes plz provide any suggestion or links how to achieve this. thanks in advance

www.google.com?q=STRUTS+DOCUMENTATION

How to set default directory for SQL LOADER

hi all,
i wanted to know how can we setup a default directory for SQL LOADER if at all we can. i connot place my control and data files in local system and use them at command prompt. rather i wanted to know if we can set default directory that the loader can use. this requirement is basically to enable all the clients to upload the data placed on the server and use the loader utility.
thanks in advance,
Basavraj

Ella,
You don't say which version of SQL Developer you are using via Citrix, but just setting the SQLDEVELOPER_USER_DIR hasn't worked for a long time (see Re: SQLDEVELOPER_USER_DIR does not function anymore). Also, since version 1.5, the default for the user directory (now set via ide.user.dir as shown below) is under the user profile area (relative to %APPDATA%), which you should be able to write to, even on Citrix.
Assuming that neither of those help, you will need to get whoever installed SQL Developer on the Citrix C: drive to modify the sqldeveloper.conf to have a line like, where the path exists for everyone who will be using the shared SQL Developer (assumes everyone has a H: drive):
AddVMOption -Dide.user.dir=H:\sqldeveloperAn alternative (depending on how you start SQL Developer via Citrix), is to create your own shortcut to start SQL Developer with something like:
sqldeveloper -J-Dide.user.dir="%SQLDEVELOPER_USER_DIR%"theFurryOne

How to set class path for mysql

hai, I have been trying to make a java program read from mysql database. but i don't know how to set the class path for mysql-connector-java-5_1_.0.6-bin. i set the class path in system variable as C:\Program Files\Java\jdk1.5.0_08\jre\lib\ext\mysql-connector-java-5_1_.0.6-bin.
in the command prompt, i compile C:\javac abc.java and run java abc.
when run it come out error java.lang.ClassNotFoundException: com.mysql.jdbc.Driver
i am using Window xp. can anybody help me??? TQ.

hai, I have been trying to make a java program read
from mysql database. but i don't know how to set the
class path for mysql-connector-java-5_1_.0.6-bin. i
set the class path in system variable as C:\Program
Files\Java\jdk1.5.0_08\jre\lib\ext\mysql-connector-jav
a-5_1_.0.6-bin.
in the command prompt, i compile C:\javac abc.java
and run java abc.
when run it come out error
java.lang.ClassNotFoundException:
com.mysql.jdbc.Driver
i am using Window xp. can anybody help me??? TQ.Right click on my computer icon,
Goto properties->advanced->environment variables.
Look for 'classpath' under system variable.
Select it and click edit.
put ';' and path of the mysql connector jar at the end
suppose if u have jar file under d:/driver/mysqlconnector.jar
thn put this value in variable value text box
;d:/driver/mysqlconnector.jar
or simply put ur driver jar file in jre/lib/ext folder
D:\j2sdk1.4.2_03\jre\lib\ext
[Servlet tutorial|http://www.jsptube.com]

How to set (class)paths for a Managed server?

How does one configure the PATH and CLASSPATH and pass definitions (like "-Djava.library.path=c:\p\bea\wlserver6.1\bin")
to a remotely-started managed server?
The section in the WLS 6.1 AdminGuide.pdf that talks about configuring a managed
server's Remote Start tab says on pages 3-9 to 3-10 that, "If you don't specify
values for these fields and attempt to start the target server from the Administration
Console, the Node Manager will attempt to start the target server with the values
for these attributes that were used when starting the Node Manager. The Node Manager
will be able to start the Managed Server in that case if you specified the required
values on the command line when starting the Node Manager."
So it sounds as if I can get the java.library.path definition and CLASSPATH sent
to the server via the Node Manager startup command.
Does that work when using the Node Manager as an NT Service? Here is my Win2K
command file for setting up the Node Manager as an NT Service. Note that I'm trying
to tell it where to find the Windows native libraries (wlserver6.1\bin for wlntio.dll)
and the JDBC drivers (C:\SHADOW\jdbc\... and C:\Orant\jdbc\... ) :
========== BEGIN installNMNtService.cmd ================ @echo off
SETLOCAL
cd C:\p\bea\wlserver6.1\
rem *** Set Classpath to load Weblogic Classes
set CLASSPATH=.;C:\p\bea\wlserver6.1\lib\weblogic_sp.jar;C:\p\bea\wlserver6.1\lib\weblogic.jar;C:\SHADOW\JDBC\scjd12.jar;C:\orant\jdbc\lib\classes111.zip
rem *** Set Command Line for service to execute
rem *** %JAVA_HOME%\java will automatically be prepended.
set CMDLINE=" -ms16m -mx16m -classpath \"%CLASSPATH%\" \"-Dbea.home=C:\p\bea\"
\"-Djava.security.policy==C:\p\bea\wlserver6.1/lib/weblogic.policy\" \"-Dweblogic.nodemanager.weblogicHome=C:\p\bea\wlserver6.1\"
\"-Dweblogic.nodemanager.reverseDNSenabled=true\" \"-Djava.library.path=c:\p\bea\wlserver6.1\bin\"
\"-Dweblogic.nodemanager.listenAddress=111.111.111.123\" \"-Dweblogic.nodemanager.trustedHosts=./config/nodemanager.hosts\"
weblogic.nodemanager.NodeManager"
rem *** Install the service
"C:\p\bea\wlserver6.1\bin\beasvc" -install -svcname:EDANodeManager -javahome:"C:\p\bea\jdk131"
-execdir:"C:\p\bea\wlserver6.1" -extrapath:"C:\p\bea\wlserver6.1\bin" -cmdline:%CMDLINE%
ENDLOCAL
================= END installNMNtService.cmd ==================
But when I start a server remotely, it can't find the native libraries and it
can't find the JDBC libraries in the CLASSPATH. Otherwise, it can serve up HTML
pages at the correct port number so I know it's running.
When starting a managed server remotely via the WLS 6.1 console, how do I tell
the managed server where the native libraries and JDBC libraries are?
Thanks!

Hi,
The memory setting on the WC_Spaces managed servers can be seen as mentioned below.
ps -eaf | grep Spaces
Above command shows something like this at the top of the output:
/a01/app/oraweb/middle/jrrt-3.1.2-1.6.0/bin/java -jrockit -Xms512m -Xmx1024m -Dweblogic.Name=WC_Spaces1 ...
Regards
Sreedhar

How to set default path for file open in SQL Developer

Similar Messages

Maybe you are looking for