How to set default time for appointment

When I had snow leopard, the default time for length of an appointment was one hour. I upgraded to Lion and now the default time is many hours. Can't seem to find the area to change the default. Keith

Hello User,
Check this:-
Sasi Nagireddy: How to Set Default Time Zone for all Users in OBIEE?
Thanks,
Sasi Nagireddy..

Similar Messages

How to set default values for boolean columns

I'm trying to deploy some content types and columns into a site with a feature. All it's ok, except that I'm trying to set a default value for boolean columns with no success.
I've tried to set default value at column level:
<Field ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DisplayName="Se publican noticias en español"
Type="Boolean" Hidden="FALSE" Group="Columnas ShaCon" >
<Default>TRUE</Default>
</Field>
and at content type level:
<FieldRef ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DefaultValue="TRUE" Required="TRUE" />
But in any case, when i create a new item with this content type, default value is applied.
Can anyone tell how to set default values for boolean columns?
Thanks in advance,
Regards,
Sergio

In the field definition you can set
<Default>1</Default>
or
<Default>0</Default>
How to set the default value Null?

How to set expiry time for cached Subjects of authenticated proxy service.

How to set expiry time for cached Subjects of authenticated proxy service in message level authentication.
Because of this, password change does not effect immediatly in proxy invocation.
I'm using Weblogic 10.3 and OSB3.0

Hi,
You can activate Time-Dependent Publishing Service on your XML form and once the Lifetime of Documents is over then the document is not visible to users.
http://help.sap.com/saphelp_nw2004s/helpdata/en/c1/c87d3cf8ff3934e10000000a11405a/frameset.htm
It is only invisible but not deleted!
So to delete all expired XML Forms you should run Scheduler Tasks for Time-Dependent Publishing:
<b>TimeBasePublishingUnpublish</b>
http://help.sap.com/saphelp_nw2004s/helpdata/en/3a/bc37b5789dee4eaa8005bff84f14cf/frameset.htm
You can also create your own Scheduler Task which deletes/archieves all expired XML Forms.
Greetings,
Praveen Gudapati
[Points are welcome for helpful answers]

How to Set default value for taxonomywebtagging control with terms and nested terms

Hi,
I have created taxonomy control in custom aspx page and I am able to select terms but I am trying to setup default value to that control.
Can anybody let me know how to set the default value for TaxonomyWebTagging control in custom.aspx page with nested terms?
Any help would be greatly apprecited.
Control code in aspx page:
<td>
<asp:Label runat="server" ID="lblLanguages">Field A: </asp:Label><asp:Label runat="server" ID="rfvlblLanguages" CssClass="errorMsg" ForeColor="Red">*</asp:Label>
</td>
<td>
<Taxonomy:TaxonomyWebTaggingControl ID="term" Width="385px" runat="server" /></td>Mapping metedata code:TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
//Set the Business Unit Field
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GROUPName"];
TermSet termSet = group.TermSets["TERMSETNAME"];
Term term = termSet.Terms["TermA"];
Guid termGuid = term.Id;
term.SspId.Add(termStore.Id);
term.TermSetId.Add(termSet.Id);
term.AllowFillIn = true;
term.AnchorId = countryGuid;
term.IsMulti = true;
Thank you.
AA.

Hi,
According to your description, you want to set default value for TaxonomyWebTaggingControl.
I have a test in my environment. It could be achieved by setting the Text Property of TaxonomyWebTaggingControl.
Here is the code snippet:
TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GroupA"];
TermSet termSet = group.TermSets["A"];
Term term = termSet.Terms["A1"];
TaxonomyWebTaggingControl1.SspId.Add(termStore.Id);
TaxonomyWebTaggingControl1.SSPList = termStore.Id.ToString();
TaxonomyWebTaggingControl1.TermSetId.Add(termSet.Id);
TaxonomyWebTaggingControl1.TermSetList = termSet.Id.ToString();
TaxonomyWebTaggingControl1.AllowFillIn = true;
TaxonomyWebTaggingControl1.IsAddTerms = true;
TaxonomyWebTaggingControl1.IsMulti = false;
TaxonomyWebTaggingControl1.Text = string.Format("{0}|{1}", term.Name, term.Id.ToString());
Here is a detailed article for your reference:
http://blog.bugrapostaci.com/2010/09/23/taxonomywebtaggingcontrol-sharepoint/
Feel free to Reply the test result.
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Patrick Liang
TechNet Community Support

How to set default view for preview?

Every time I open a PDF using Preview I have to set the view to 'thumbnails', then 'two pages up', then adjust the zoom. Complete waste of time.
Anyone know how to set defaults so that it opens in a predictable way?
thanks,

I customized my Toolbar to look like the following. Click the middle button that has the 1 circled. That tells Preview to remember to display pages at actual size (100%). Every file that I open now displays at 100%.

How to set default language for Portal?

Hi All,
We use EP6.
Default language is not defined and therefore is being set by the browser's language.
Where do I set default language for all users?
(I don't want that the users will be able to change it by themselves by browser/EU role).
I tried to set the "request.mandatorylanguage" and
"request.mandatorycountry" in prtDefault.properties but it didn't help.
Thanks,
Omri

Hi Omri,
are those to parameters
request.defaultlanguage=...
request.defaultcountry=...
set in the prtDefault.properties, and the J2EE Server restarted after the change?
Check out this thread and the link given there for more info: HOW to define the default language in the portal
Hope this helps,
Robert

How to set default directory for SQL LOADER

hi all,
i wanted to know how can we setup a default directory for SQL LOADER if at all we can. i connot place my control and data files in local system and use them at command prompt. rather i wanted to know if we can set default directory that the loader can use. this requirement is basically to enable all the clients to upload the data placed on the server and use the loader utility.
thanks in advance,
Basavraj

Ella,
You don't say which version of SQL Developer you are using via Citrix, but just setting the SQLDEVELOPER_USER_DIR hasn't worked for a long time (see Re: SQLDEVELOPER_USER_DIR does not function anymore). Also, since version 1.5, the default for the user directory (now set via ide.user.dir as shown below) is under the user profile area (relative to %APPDATA%), which you should be able to write to, even on Citrix.
Assuming that neither of those help, you will need to get whoever installed SQL Developer on the Citrix C: drive to modify the sqldeveloper.conf to have a line like, where the path exists for everyone who will be using the shared SQL Developer (assumes everyone has a H: drive):
AddVMOption -Dide.user.dir=H:\sqldeveloperAn alternative (depending on how you start SQL Developer via Citrix), is to create your own shortcut to start SQL Developer with something like:
sqldeveloper -J-Dide.user.dir="%SQLDEVELOPER_USER_DIR%"theFurryOne

How to set travel time for after a meeting?

Hi,
I hope you can help solve this problem...
Scenario: I have to go to a meeting and come back again.
Problem: In the Calendar application I can set the travel time for before a meeting but there is seemingly no functionality to set the travel time for after a meeting. Hopefully it hasn't escaped all those fantastic developers that people have to travel back from a meeting as well as travel to it?
Question: How do I set the travel time in an event for travelling back after a meeting? I would like to avoid the kind of solution where I have to create another separate event just after the meeting event and call it 'travel time'.
Hope you guys can help...
Thanks
Clown Guy

first make a Locale object as
public Locale(String language,
String country)
Construct a locale from language, country. NOTE: ISO 639 is not a stable standard; some of the language codes it defines (specifically iw, ji, and in) have changed. This constructor accepts both the old codes (iw, ji, and in) and the new codes (he, yi, and id), but all other API on Locale will return only the OLD codes.
Parameters:
language - lowercase two-letter ISO-639 code.
country - uppercase two-letter ISO-3166 code.
Throws:
NullPointerException - thrown if either argument is null.
and then use following method.
public SimpleDateFormat(String pattern,
Locale locale)
Constructs a SimpleDateFormat using the given pattern and the default date format symbols for the given locale. Note: This constructor may not support all locales. For full coverage, use the factory methods in the DateFormat class.
Parameters:
pattern - the pattern describing the date and time format
locale - the locale whose date format symbols should be used

Setting default times for events in ical.

When setting an event in ICal on my Mac (Im using Lion 10.7.5) if I double click to start an event, it places an event on the day I clicked on. Im in the month view. When I go into the event to set the time, the default is 10 am to 6 pm and I have to reset it to an hour long event. I do know that if I type in the time at the end of the event name, eg. Meet Mary 7 pm, the event will have an hour long duration in the calendar. Is there a way to change the default for my first method of clicking to create a new event by double clicking in the day square for the event? Thanks.

Hi BumbleBBB,
The article below will explain the parameters for adding events to the Calendar:
iCal 5.x: Add events to a calendar
Enter a name, date, and time duration for the event, and then press Return. For example, you can enter “Super Bowl Party Feb 6,” “Movie with Rebecca on Friday at 7pm,” “Soccer Game on Saturday from 11am-1pm,” or “Breakfast with Jon,” and then press Return.
If you don’t enter a time duration for the event, iCal sets the event’s duration to 1 hour.
If you don’t enter any time information for the event, iCal makes the event an all-day event.
If you enter “breakfast” or “morning,” iCal sets the event to start at 9 a.m.
If you enter “lunch “ or “noon,” iCal sets the event to start at 12 p.m.
If you enter “dinner” or “night,” iCal sets the event to start at 8 p.m.
I hope this information helps ...
- Judy

How to set default value for vc2_255_arr in plsql parameter directive?

Hi,
I would like to set a default values for a plsql parameter which is of vc2_255_arr type. How to do that?
Below is the example from PL/SQL Server Page.
+" To set a default value, so that the parameter becomes optional, include a default="expression" attribute in the directive. The values for this attribute are substituted directly into a PL/SQL statement, so any strings must be single-quoted, and you can use special values such as null, as in the following example:+
+<%@ plsql parameter="p_last_name" default="null" %> "+
My plsql parameter is p_arr which is of "TYPE vc2_255_arr IS TABLE OF VARCHAR2(255) INDEX BY BINARY_INTEGER"
*<%@ plsql parameter="p_arr" type="PMP_LIB.VC2_255_ARR" %>*
Thanks in advance!
kwong

My plsql parameter is p_arr which is of "TYPE vc2_255_arr IS TABLE OF VARCHAR2(255) INDEX BY BINARY_INTEGER"You need to declare it in a package specification and initialize in the package body:
SQL> create or replace package pmp_lib
as
   type vc2_255_arr is table of varchar2 (255)
                          index by binary_integer;
   vc2_255_arr_default   vc2_255_arr;
end pmp_lib;
Package created.
SQL> create or replace package body pmp_lib
as
begin
   vc2_255_arr_default (1) := 'abc';
   vc2_255_arr_default (2) := 'def';
end pmp_lib;
Package body created.
SQL> declare
   arr   pmp_lib.vc2_255_arr := pmp_lib.vc2_255_arr_default;
begin
   for i in 1 .. arr.count
   loop
      dbms_output.put_line (arr (i));
   end loop;
end;
abc
def
PL/SQL procedure successfully completed.so in your case it would probably be sth like (assuming pmp_lib is a package):
<%@ plsql parameter="p_arr" type="PMP_LIB.VC2_255_ARR" default = "PMP_LIB.vc2_255_arr_default" %>

How to set default path for file open in SQL Developer

Hi,
I am new to Oracle SQL Developer. Everytime when I open a file, it will default to the install directory. It is hurtingmy hand because I have to click back to the folder where I put my sql statements.
Is there any way to set the Home or Work button to point to the location I like? or add anther button to point to my folder? I just don't want to click 5 to 10 times to open a file.

There are a few things. One is that you can set a working directory for any files you run in the SQL Worksheet i.e. @myfile.sql will pick up this directory.
You can also set a preference for exporting files.
Also if you use File -> Open, it should remember where you were the last time, so you hunt the first time, then it remembers for the next time. There is a bug for ctrl-O that always goes back to the original directory, but that has been fixed for the next patch release, so ctrl -O will also remember where you were last.
The differences here are because we are dependent on the IDE from JDeveloper, and so we don't have full control over the Save and Open dialogs. We are aware of this frustration and are planning to change this for a future release.
Regards
Sue

How to set default value for html:file in struts

hi
i am working on an application using struts situation is i am using the
<html:file property="" /> to allow the user to upload file. but i need that a default file should be set so that even if the user donot click browse ie the user wish to upload that default file the default file get uploaded on page submition. Is it possible to set any default value for html:file ...if yes plz provide any suggestion or links how to achieve this. thanks in advance

www.google.com?q=STRUTS+DOCUMENTATION

How to set default preset for Save for Web

Following the demise of my laptop, I have installed PSE8 (Windows) on my new one.
On my old machine, the default preset for Save for Web was JPEG High
On the new installation, the default is GIF and you have to manually scroll through the presets every time to apply the JPEG High preset.
Is it possible to change the default preset. If so, how.
Thank you

That faq from John R Ellis has not been updated, but may be useful:
Photoshop Elements 6/7/8 Frequently Asked Questions (FAQ)

[CS2/CS3 JS] How to set Default Font for multiple documents

Hello,
How do I set the default font for any new text frames I create.
I have several thousand InDesign templates in which the default font is set to a font that is no longer licenced and therefore requires changing.
I already have a script which will open each template and change the first insertion point of any (empty) text frame to a new font but any new text frames created in these templates still want to use the unlicensed font.
Thanks for any assistance.
Simon Kemp

for existing documents:
app.activeDocument.textDefaults.appliedFont = myDoc.fonts.itemByName ('Arial\tBold');
for newly created ones:
app.textDefaults.appliedFont = myDoc.fonts.itemByName ('Arial\tBold');

How to set default language for typing english if my OS language is russian?

Hi. I cant figure out how to set english as default typing language. Opening Skype, new browser window, vpn client, switches my input to russian (my os language). Especially this annoys if im trying to enter login and password.

oleg.lestat wrote:But still when i setting cursor in Google Chrome addrese bar, or my vpn client password field it switches to russian
Changeing language (e.g. to have english menues or keybord layout) on a system, took place in applications too only if the application supports that language, or uses by default the system librarys to adopt the language settings.
Not all applications use automatically the system librarys of your Mac for language settings or spell checking. Most will do so, some only during installation, some never.
Applications can have own language settings others have only the installation language available.
Have you checked this on Chrome (Wrench -> Options -> Advanced -> Change Fonts and language settings -> Language -> Google Chrome language) and your VPN Client?
Lupunus

How to set default time for appointment

Similar Messages

Maybe you are looking for