How to set dimension level security with multiple levels

Hi,
We have hierarchy with Level 0 codes to Level 4 codes.
For e.g.
Region 1 : Level 0 code 10000, Level 1 code 10001, Level 2 code 10011, Level 3 code 10111, Level 4 code 11111
Region 2: Level 0 code 20000, Level 1 code 20001, Level 2 code 20011, Level 3 code 20111, Level 4 code 21111
Region 3: Level 0 code 30000, Level 1 code 30001, Level 2 code 30011, Level 3 code 30111, Level 4 code 31111
From SSAS role administration, I would like to assign a user permission to all Region 1 codes and only Level 3 code (30111) of region 3.
How and where do I set this kind of permission?
Thanks in advance.
Manisha

see
http://www.mssqltips.com/sqlservertip/1834/introduction-to-dimension-security-in-sql-server-analysis-services-ssas-2005/
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Similar Messages

Problem in Aggregate with Multiple level of dimension

Hi,
I have a BI repository with a snowflake schema. I have also designed the business model with snowflake, It works with drilling and all but I am facing problem when I am
creating a logical column aggregating with a higher level of dimentation. Let me illustrate that :
I have the Following Hierarchy :
Tournament(id, Name) ---- > Round (id, name, tournament_id) -------> Match (id, Name, RoundId ) | Match is fact table and other 2 dimension.
I also created a logical dimension called tournament with 3 levels.
Now say I want to create a logical column Total Number of Matches , aggregating to the dimension level of Tournament. The result gives counts a 0 for every tournament. However
it is working perfectly when the dimension level is Round (which is the immediate next level after fact).
The Logical request generated (in case of Tournament level) :
   MatchId:[DAggr(Measure1.MATCHID by [ Matches$.TournamentId] SB Tournament)] as c1 GB.
    There is no such column as TournamentId in Matches$ table. How does the BI server got this ?
   The execution plan evaluate this:
     cast(NULL as INTEGER ) as c1 GB [for database 0:0,1]
   Can someone please explain why is this happening, is it because of the snowflake schema, but I guess if BI server can handle a snowflake schema it should work the Aggregate
   properly in multiple levels of dimensions, or it is something I am doing wrong.
   Execution Environment:
     Windows XP , OBI 10g on OC4J. Data source : MS Excel (ODBC 3.5)
Regards,
Ru

Hi,
With reference to your question.
Can any operator perform this task..I don't think any single operator will help you.
I suggest using an intermediate (staging) table by using a PL SQL procedure with output port to store the values of account number provided the number of accounts are limited. Else use an array variable for account of an employee.
In short no simple solution because of the bad source design else the pivot/unpivot operator would have helped you.
Cheers
- Mohammed

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro. What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
NOTE: If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did. He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse.
THIS IS WHAT YOU WILL NEED TO DO:
First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up. If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it. Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.

I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
I have a Linksys WRT320N I used for the initial Charter setup.
I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
Hasn't caused any issues so far but one thing I did notice.
On the Linksys there were 3 DNS servers listed.
The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
I tried everything above, but light on modem still flashes yellow.
I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

How to set up time capsule with BT Infinity

how to set up time capsule with BT Infinity

The easiest and sure way is to use bridge on the TC as the method of connection. The TC then becomes a device in your network and gets its IP from the main router that I presume BT supply.
Method is,
1. Plug the TC WAN port into the BT supplied modem by ethernet.
2. Plug the computer you are using for the setup into the TC by ethernet.
3. Run the airport utility .. go to internet tab on the top menu..
In the bottom option, Connection Sharing choose off (bridged mode)
4. Go to the wireless page and setup wireless connection as you like it.. using whichever band you want. And make sure security is set to the highest setting, wpa2 personal. Put in a decent wireless passkey.
5. Press the update and fix whatever else the TC will show as needing fixing.. usually security stuff.
6. You can then disconnect the ethernet and connect by wireless if you want. Any port on the TC will now be a LAN port, including WAN.
This is assuming BT supply a wireless router with built in vdsl/other type of modem. If so you normally will not be able to bridge the modem, unless BT are using pppoe authentication which they haven't in the past.
If you really need to use the TC as a router then you will need to work out an alternative method. You can double NAT by placing the TC in the DMZ of the BT router if that is an option. It is not without issues in general.

Data level Security with Oracle Apps as Source

Hi all
I am implementing Data level Security with Apps as Source(OLTP) on Single Sign On.(Oracle has provided the Vanila rpd & we are working on that)
I need to Filter data based on Business Group, Users are created in Apps and they are registered with some Responsibilities.
(for eg, OBI User CHINA is a Responsibility; Now he will get only Business Group ID for China)
I have created Groups in rpd with same name as the responsibility in Apps.
I have created Initialization Blocks from which I m getting only 1 business group ID for every :USER.(I tried the code in TOAD & I m getting the correct BG ID)
I have created Group in WEB with the same name as the Group name in rpd.
If I say show all Users and Groups in WEB, I m getting the APPS Users.
I hv Reloaded the server metadata files and restarted the BI Server/WEB Server also...
But in the Report, I m getting all the Business Group Ids,
Plz advice if I m doing something wrong.
ThanQ
Anand

You need to be creating your "business groups" as a group in the RPD, init blocks to retrieve the user business group at login. Filters in the Logical table sources to restrict data to relevant business groups only.
Presentation 'Web Cat' groups with the same name as the RPD groups so a user inherits membership automatically.
I'd suggest sourcing a vanilla OBIA rpd to see how it is implemented out of the box.

HT4436 What is the best way to set up business accounts with multiple ipads?

What is the best way to set up business accounts with multiple ipads?

Here are three different methods >
How to use multiple iPods, iPads, or iPhones with one computer, http://support.apple.com/kb/HT1495
This article > iOS: How to transfer or sync content to your computer, http://support.apple.com/kb/HT1296
suggests using contacts groups.
When syncing contacts, you can choose to sync all of your contacts or only selected groups.
You can select a group of contacts to which all new contacts created on your iOS device will be added.
You can set up groups in the Address Book application.
If you are all going to use the same iTunes apps library, turn off "Automatically sync new apps" in the apps tab just below the list of apps. Then you won't get new apps on your device unless you select them.

Message Level Security with SOAP Adapter

Hi,
I need to use Message Level Security with my SOAP Adapter. Please let me know if anyone has done the same in the past?
What are the steps I would need to do? How can I use WSS based security in the SOAP Adapter?

Hi,
Message-level security is recommended and sometimes a prerequisite for inter-enterprise communication.
It improves communication-level security by adding security features that are particularly important for inter-enterprise
Message-level encryption is required if message content needs to be confidential not only on the communication lines but also in intermediate message stores.
Refer
How to use Client Authentication with SOAP Adapter
XML Encryption Using Web Services Security in SAP NetWeaver XI
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0650f56-7587-2910-7c99-e1b6ffbe4d50
http://help.sap.com/saphelp_nw04/helpdata/en/a8/882a40ce93185de10000000a1550b0/frameset.htm
Thanks
swarup

How can I create additional security with my ipad on a shared office network?

How can I create additional security with my ipad on a shared office network?

Haven't heard of any security explotes on the iPad. That should tell you security has been built in.
Great password. Set up remote wipe in case iPad goes missing. Backup iPad regularly.
Robert

How can a calender be synced with multiple apple devices

how can a calender be synced with multiple apple devices so that all the users can be able to access the calender and also the entries done by one of them?

Hi Muneshdm,
Welcome to Apple Support Communities.
See these articles for information on setting up iCloud on multiple iOS devices, as well as how to share calendars:
iCloud: Set up iCloud on your devices
http://support.apple.com/kb/PH2609
iCloud: Share a calendar with others
http://support.apple.com/kb/ph2690
Best,
Jeremy

How do i take one layer with multiple selections...

how do i take one layer with multiple selections and make those selections their own layer?

Yes sir. It w was really hard to explain. It is discontiguous segments that are separated by transparent areas. And I want those non transparent areas to be on their own layer. I have a photo shop file that has a bunch of buttons on them and they are on a transparent background. It is one layer. I want to select all the buttons and put them on their own layers. I can do this manually by selecting a button and cmd Just to a new layer, but when I have 200 buttons it is a daunting task.
Sent by MailWise<http://www.mail-wise.com/installation/4> – Your emails, with style.

How can i create excel sheet with multiple tabs using utl file?

how can i create excel sheet with multiple tabs using utl file?
any one help me?

Jaggy,
I gave you the most suitable answer on your own thread yesterday
Re: How to Generating Excel workbook with multiple worksheets

How do you get a line with MULTIPLE fields to WRAP ?

How do you get a line with MULTIPLE fields to WRAP ?
Good afternoon everyone...
THE PROBLEM: Why doesn’t a line with multiple fields WRAP?
HYPOTHETICAL EXAMPLE/WHAT I”D LIKE TO SEE
If I have 2 fields on a line (this is now a hypothetical example and nothing to do with my actual report)….let’s call them field A and field B. And if field A has values of all ‘X’ and field B has values of all ‘Y’…then….the normal case would be (ignore dots – only for spacing):
A……………………… B
XXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYY
But what if A is too long? I would want to see B wrap onto the next line like this:
A……………………………………………………B
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX YYYYYY
YYYYYYYYYYYYY
And similarly….if B is extra long, can the line print as:
A………………………. B
XXXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYYYYYYY
YYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
I don’t want the case where B is long and I get:
A………………… …B…
XXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYY
………………………..YYYYYYYYYYYYYYYYYYYYY
I can see how you can wrap an individual field like that…but how can you WRAP a line of[b] fields within the frame so it wraps to the BEGINNING of the frame on next line?
My SPECIFIC CASE
I have a report that I have stripped down to a simple structure for the purposes of this explanation.
My DATA MODEL has the main QUERY (for plant family and species data). The columns of the query are divided into 2 groups. The 1st GROUP contains the family data. Below that is the rest of the species data in a 2nd GROUP.
Linking from the 2nd species group (above) is a new QUERY to extract REGION data based on the common key field. Under this 2nd query is another group with all the REGION columns.
The LAYOUT MODEL has a group frame (the main , base one)
On top of this is a repeating frame based on the 1st group (family data).
On top of this is another repeating frame for the 2nd group (species data).
On top of this is 2 Frames on the same line line. The 1st frame contains columns from the species group .
The 2nd frame on this line is a repeating frame. The PRINT DIRECTION for this frame is ACROSS/DOWN. It repeats details of the REGION where the species is found. These columns come from this group come from the REGION QUERY and GROUP.
All fields on the report line have variable horizontal elasticity.
The problem is that when there is too much data on the line, it does NOT WRAP to the 2nd line.. It TRUNCATES.
Can the line be made to WRAP????..
In my current report, 1 of 2 things is happening:
1) All fields print on the line until it hits the page boundary and then it just stops. Truncated!
2) All fields print on the current line, then Oracle Reports throws a new page to print the REMAINDER of the long, input line
But I would like a LONG line to continue printing onto the following line of the same page.
I have tried all combinations of the elasticity fields and the ‘ADVANCED LAYOUT’ properties.
I have been focussing my attention with this problem on the frames .
We are using REPORT BUILDER V 6.0.8.26.0
Thankyou to anyone who may offer assistance.
Tony Calabrese.

Steve,
you gain 1 thing, but you lose something else!
This thing is SO frustrating!
Hey Steve! Good afternoon.
I've done as you suggested....I have a long text boilerplate item - the only 1 on the line...and it has all the column in it.
So it looks like:
&col1 &col2 &col3 &col4 &col5 etc etc etc
And the line expands nicely to each field's requirements.
And when it gets to the right page boundary...it WRAPS to the next line! Beautiful!!!
The only thing is that...when I had individual fields across the line I was able to create format triggers for those fields. And in doing so I was able to reduce the font and change the justification. I had to do that because some of the fields had to appear superscripted.
So I wanted something like (ignore the dots):
...................................ppppp
AAAA BBBB CCCCC DDDD EEEE FFFFFF
So the field of 'ppppp' appeared slightly higher on the line than the other fields...
I can't see how I can do this with a single TEXT field containing all the &COL values.
Have you ever come across anything like this?
Thankyou again,
Tony Calabrese 12/4/2007

HP Officejet 6500A How do I scan a document with multiple pages into one file?

HP Officejet 6500A Plus e-All-in-One Printer - E710n
Windows 7 (64 bit)
How do I scan a document with multiple pages into one file? My old printer (psc 2110) asked after each scan if I wanted to scan another page. At the end I had one pdf file with multiple pages.
This new one creates one file for each page and I cannot find a way to create one pdf file with multiple pages.
This question was solved.
View Solution.

Hi mpw101,
If you load the papers into the ADF - Automatic Document Feeder, and then select Document to PDF then they will all be scanning into one file. Let me know if this works for you?
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

How can I get an album with multiple artists to display in my Nano as one album insteadof multiple albums?

How can I get an album with multiple artists to display in my Nano as one album insteadof multiple albums?

See this page for helpful information.
http://samsoft.org.uk/iTunes/grouping.asp
B-rock

How to set the screen size with nested Iview screen

Can someone show me how to set the screen size with nested IView screen.
at the moment i only try it with trial and error untill it looks somewhat close. Is there a property in VC to set the size for Height and width.
The same question is for the form. the form elements inside the form is easy but the actual form is still a challenge.

Hi,
Yes you are correct ,Still the Form and iview are not able to change thier Layout Structure using a Propery.
it is available with VC7.1
Govindu

How to set dimension level security with multiple levels

Similar Messages

Maybe you are looking for