How to set FileAdapter Append property Dynamically - SOA 11.1.1.3

Hi,
At the manual (http://download.oracle.com/docs/cd/E12839_01/integration.1111/e10231/adptr_file.htm) I found that I can use:
Append Mode
The Oracle File and FTP Adapters enable you to configure outbound interactions that append to an existing file. The Append to Existing File option allows the outbound invoke to write to the same file. There are two ways in which you can append to a file name:
* Statically - in the JCA file for the outbound Oracle File Adapter
* Dynamically - using the header mechanism
I need to set this dynamically, but I can't find the property that I must set, like jca.file.append....
Thank You in advance.
JP

http://download.oracle.com/docs/cd/E12839_01/integration.1111/e10231/adptr_propertys.htm#CHDJDGFD
Append
If this property is set to true, it causes Oracle File and FTP Adapters to append to a file on outbound. If the file does not exist, then a new file is created.
The file name can either be specified in the JCA file for the outbound operation or in the jca.file.FileName header.

Similar Messages

How to set the item property to restrict the user to not to copy from above

Hi Guru's,
I have a requirement like, There were two items on the form name email Id, Confirm email Id.
I have to ristrict the user to not to copy from email Id item.. make him/her to enter the value into confirm email id item field manually.
How to set the item property to restrict the user to not to copy from above item and paste it in this item.
Please help.
Thanks!!

Just an opinion here, but that is about the dumbest requirement I have ever seen.
I am always annoyed by web sites that ask me to enter my email twice. I ALWAYS copy the email address from the original entry and paste it into the second one.
People enter their email addresses so often, it takes a real klutz to not get it right. And what makes you think that if they enter it twice, that they won't enter it wrong both times anyway???

How to set the 'text' property of a 'Header' region dynamically?

Hi,
I have a requirement to display the 'text' property of a 'Header' region, based on a query.
So I need to set the text property programatically in CO.
Can I use setText("..") by getting the handler to the 'Header' region?
If so, How to get the handler for the 'Header' region?
Message was edited by:
user594528

How to get the handler for the 'Header' region to call the setText()?
OAHeaderBean Header1 = (OAHeaderBean)...........................
Header1.setText("....");

How to set the cardinality property as 1..n for a dynamically created node

Hi...everybody
    I am creating Dropdown by index UI element and the
context atrributes dynamically.To bind multiple data to a dropdown
the cardinality property of the node should be 0..n or 1..n,
But i could not set the property of the dynamically created context node to 0..n ...
can any body suggest me..
I implemented the following code in WDDoModify View
IWDTransparentContainer tc=(IWDTransparentContainer)view.getElement("RootUIElementContainer");
IWDNodeInfo node = wdContext.getNodeInfo().addChild("DynamicNode",null,true,true,false,false,false,true,null,
          null,null);
IWDAttributeInfo strinfo=node.addAttribute("Value","ddic:com.sap.dictionary.string");
dbyindex.bindTexts(strinfo);
tc.addChild(dbyindex);
I could successfully display one value in the drop down,by adding the following code before the line tc.addchild(dbyindex);
IWDNode node1=wdContext.getChildNode("DynamicNode",0);
IWDNodeElement nodeElement=node1.createElement();
nodeElement.setAttributeValue("Value","Hello");
node1.addElement(nodeElement);
but when
i am trying to bind multiple values i am getting Exception ,,,,

hi
you are getting the exception because of cardinality property.
i.e   true,false and
you are trying to add morethan one element.
so,if you want to add morethan one than one element you have to set the cardinality property to true,true (or) false,true.
In your code do the following modification for changing the cardinality.
For 0..n -->false,true
      1..n-->true,true
IWDTransparentContainer tc=(IWDTransparentContainer)view.getElement("RootUIElementContainer");
IWDNodeInfo node = wdContext.getNodeInfo().addChild("DynamicNode",null,true,true,false,false,false,true,null,
null,null);
IWDAttributeInfo strinfo=node.addAttribute("Value","ddic:com.sap.dictionary.string");
dbyindex.bindTexts(strinfo);
tc.addChild(dbyindex);
hope this will solve your problem.
In addchild(..) the parameters are
addChild("Name ,
                Element class for model node ,
                Is singleton? ,
                Cardinality ,
                Selection cardinality ,
                Initialise lead selection? ,
                Datatype ,
                Supplier function ,
                 Disposer function);
Regards
sowmya

How to set the source property of image control dynamically?

Hi,
I have different fxg files which I want to display in a list. For each row in the List, I define which fxg file to be displayed in my database.
I need to know how to set the image1.source = (the fxg path) as a string from database?
Is there any conversion needed in this case? If so, can you please help me how to do this?

Hi,
Thank you for your response. I am new to Adobe Flash Builder, Flex and action script. I don't get your answer straight away.
What I basically need is, I need to set image1.source = strFXG. Right now, this does not show the image. I don't understand fxgObject.pathid.source => how to give this?
Moreover, when I did google search, there is somethink like fxg converter which converts the fxg to a component. I thought this is a very simple problem on how to convert the fxg string to an object format. But now, it looks like it might be a big problem. Can anyone help me in this?
import spark.components.Image;
                              protected function view1_creationCompleteHandler(event:FlexEvent):void
// TODO Auto-generated method stub
var strFXG:String = 'assets.DB_Actief_Graphics';
                                        var image1:Image = new Image();
                                        image1.x = 100;
                                        image1.y = 100;
                                        image1.source = strFXG;
                                        addElement(image1);
Regards,
Chella

How to set the Range size dynamically in an Iterator?

Hi,
One of my scenrio, i read the range size of Iterator and i performed the business logic validation. But in my case, range size is changed as per business requriement for a paricular Iterator.
Is it possible to set the Range size property dynamically in an Iterator of pageDef File.
I'm using JDeveloper 11.1.1.3.0
Can anyone help me regarding this???
Thanks & Regards,
Perumal S

Good afternoon,
This works: f?p=1:#MYPAGENUMBERCOLUMN#::Session:Request:Debug:Clearcache:itemname:itemvalue:printerfreindly
It works very well. I have been struggling for a couple of hours trying to figure out how to calculate the page number I wanted to link to from a report column defined as a linked item. I ended up modifying my VIEW to include the page number for that particular type of data and use this technique to jump to the correct page.
Thanks for posting this. Nothing else seems to work.
Don.

How to set the target property of hyperlink through formula

Hi guyz,
I have a problem in setting the target property of hyperlink field. I'm using CR XI R2 with asp.net.
I want to set the target property of hyperlink as one of the frame on my webform. how can i do it through formula in crystal report.
I want to set it through CR because i don't have any way to identify the link fields uniquely. these link fields are generated dynamically from data base. I have some other links on my webform. If i try to get all links through javascript and change the target property it may effect some other functionalities, so i'm avoiding using javascript to set the target property of hyperlinks.
your help will be highly appreciated.
Thanks in advance
Deepak

You may want to look at the HyperlinkTarget property of the CrystalReportViewer. If you want all hyperlinks in the report to go to that frame, it should work for you.

How to set UOO(bea_unitoforder) property within BPEL Adapter property

Hi,
In oracle documentation JMS message payload field values can be used as correlation properties.
Correlation property aliases are used to define from which payload field the correlation property value is taken.
I need to set the correlation property value from a JMS message header field instead of payload fields. (=JMS JCA Adapter properties).I have a UOO value set same for all messages.Now I need to set this WL property to JMS JCA Adapter property and then create one single instance for all messages in queue.
Routing a New message to a (New or) Existing Instance:
http://docs.oracle.com/cd/E28389_01/dev.1111/e10224/bp_correlate.htm#CHDDJEAI
How is it possible in BPEL???
Thanks
Souvik

Hi,
In oracle documentation JMS message payload field values can be used as correlation properties.
Correlation property aliases are used to define from which payload field the correlation property value is taken.
I need to set the correlation property value from a JMS message header field instead of payload fields. (=JMS JCA Adapter properties).I have a UOO value set same for all messages.Now I need to set this WL property to JMS JCA Adapter property and then create one single instance for all messages in queue.
Routing a New message to a (New or) Existing Instance:
http://docs.oracle.com/cd/E28389_01/dev.1111/e10224/bp_correlate.htm#CHDDJEAI
How is it possible in BPEL???
Thanks
Souvik

Hi how to set the visible property in oracle adf?

Hi,
I am new to oracle adf in my application one of the field is id and it is sequence generated value Whenever I entered remaining values and click on save then only it has to display with sequence generated value before saving it has to be in hide mode. Can any one help me how the approach is.

As there are three ways through which you may pass a message to B2B, so there are three ways to set Action name property.
If you are using SCA/Fabric then set below properties -
b2b.fileName
b2b.contentType
If you are using JCA JMS adapter, then set below property -
jca.jms.JMSProperty.ACTION_NAME
If you are using JCA AQ adapter then set -
ACTION_NAME
Regards,
Anuj

How to set a system property via the config tool?

Hello,
how can I set a system property via the config tool? Before I chose WAS from SAP I used java with option -D<name>=<value> to set the system properties.
Very much thanks in advance.
Regards
Carsten

Hi Carsten,
WAS config tool is located under
e.g. usr\sap\J2E\JC00\j2ee\configtool
start configtool.bat
there will be opened a configuration tool GUI
Click on the instance_ID.... leaf of the tree in the left pane and then on the server_ID.... leaf.
Java settings will appear in the right pane after this steps.
Best Regards,
Violeta

How to set background image in Dynamic Shell Layout

Experts,
Using dynamic shell layout, how can we create a skin like this http://www.2shared.com/photo/OqXfb5jq/layoutissue.html
Issues :
1)Need to set the background to the page - How to set it in dynamic shell layout.
2)Panel box color to be changed
please advice
thnks
jdev 11.1.2.1

Color goes UNDER the background image. Just set it.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"StarPilot06" <[email protected]> wrote in
message
news:eqqve6$341$[email protected]..
>I am trying somethign that seems tricky to me...
>
> The image I am using I faded to a solid color on the
bottom half. I set
> the
> background image to to left and NO REPEAT but when the
cell grows with
> content
> and it stretched beyond the image it goes blank
underneath. How do I set
> a
> background color without going over the background
image?
>
> I need them both to be background because I want to use
text over both.
>
> Any ideaS?
>

How to set clock skew property at client side when invoking web services

Hello,
now we're using weblogic 11g, we want to set the clock skew properties.
in server side, we "Create a Web Service security" to set the "Clock Skew" property, change it value from 60000 to 120000, then we invoke the web service from stand-alone client on another machine, the clock skew between the server machine an client machine is 80000. but it still throw exception:
javax.xml.ws.soap.SOAPFaultException: Message Created time past the current time even accounting for set clock skew+
at weblogic.wsee.jaxws.framework.jaxrpc.TubeFactory$JAXRPCTube.processResponse(TubeFactory.java:241)+
we think we still need set the clock skew at client side. in webloigc8.1 doc(http://download.oracle.com/docs/cd/E13222_01/wls/docs81/webserv/client.html), we find there's properties such as "weblogic.webservice.security.clock.precision" we can set in client side, but in weblogic 10.3 doc, we can't find these properties.
now how to set the clock skew at stand-alone client in weblogic 11g?
Thanks!
Fred

Hello,
now we're using weblogic 11g, we want to set the clock skew properties.
in server side, we "Create a Web Service security" to set the "Clock Skew" property, change it value from 60000 to 120000, then we invoke the web service from stand-alone client on another machine, the clock skew between the server machine an client machine is 80000. but it still throw exception:
javax.xml.ws.soap.SOAPFaultException: Message Created time past the current time even accounting for set clock skew+
at weblogic.wsee.jaxws.framework.jaxrpc.TubeFactory$JAXRPCTube.processResponse(TubeFactory.java:241)+
we think we still need set the clock skew at client side. in webloigc8.1 doc(http://download.oracle.com/docs/cd/E13222_01/wls/docs81/webserv/client.html), we find there's properties such as "weblogic.webservice.security.clock.precision" we can set in client side, but in weblogic 10.3 doc, we can't find these properties.
now how to set the clock skew at stand-alone client in weblogic 11g?
Thanks!
Fred

Can anyone please tell me how to set a long tip dynamically?

Hi Team,
Could you please tell me how to set a longtip dynamically??
Thanks,
Swetha S

Hi Shweta,
As mentioned, the parameters for the setLongTip(OAPageContext pageContext, String tipMessageApplShortName, String tipMessageName)
Instead, you are passing setLongTip(pageContext,String string). Put in the Message Application Short Name and respective Message name in above method parameters.
Regards,
Zahid

How to set the file path dynamically based on sytem, username, and date

Hi All,
My requirement is upload the data into one structure like xyz that is related to t.code MCSZ.
file will be in UNIx SERVER .
PATH IS: /sapif
file name is xy789 load .txt
I have to write code in one user-exit
how can i set the file path for this.
shall i put hard code file path?
because i have to writecode in user-exit.
plz tell me how to set the file path based ons syetem, username, date
Thanks in advance
Ram.A

Concatenate the field SY-SYSID, SY-UNAME and SY-DATUM for the file path

How to set the charset encoding dynamically in JSP

Is there any way to set the charset encoding dynamically in a JSP
page?
we are using weblogic 6.1 on HP unix.
is there some way we can set the charset dynamically in the page directive
<%@ page contentType="text/html;charset=Shift_JIS" %>
and in MAET tag
<meta http-equiv="Content-Type" content="text/html" charset="Shift_JIS">
Saurabh Agarwal

Dear Saurabh,
I guess it is possible. Here is an example I have made some time ago :
In my html page :
<form name="form1" METHOD=POST Action=Lang ENCTYPE="application/x-www-form-urlencoded" >
<p>
<select name="code" size="1">
<option value="big5">Chinese</option>
<option value="ISO-2022-KR">Korean</option>
<option value="x-euc-jp">Japanese</option>
<option value="ISO-8859-1">Spanish</option>
<option value="ISO-8859-5">Russian</option>
<option value="ISO-8859-7">Greek</option>
<option value="ISO-8859-6">Arabic</option>
<option value="ISO-8859-9">French</option>
<option value="ISO-8559-1">German</option>
<option value="ISO-8859-4">Swedish</option>
<option value="ISO-8859-8">Hebrew</option>
<option value="ISO-8859-9">Turkish</option>
</select>
</p>
<p>
<textarea name="entree_text"></textarea>
<input type="submit" name="Submit" value="Submit" >
</p></form>
and in my jsp :
// Must set the content type first
res.setContentType("text/html");
code = req.getParameter("code");
example = req.getParameter("entree_text");
PrintWriter out = res.getWriter();
// The Servlet send to the Browser the informations to format the language type
out.println("<html><head><title>Hello World!</title><meta http-equiv=\"Content-Type\" content=\"text/html; charset="+code+"\"></head>");
// System recover the general Character encoding
String reqchar = req.getCharacterEncoding();
out.println("<body><h1>Hello MultiLingual World!</h1>");
out.println("You have defined an ISO of : "+code);
out.println("<BR>This is the code of the page that is displayed in this page<BR>");
out.println("<BR>");
out.println("<BR>");
out.println("Character encoding of the page is : "+reqchar);
out.println("<BR>This is the character code in the Servlet");
out.println("<BR>");
out.println("<BR>");
out.println("<BR>");
out.println("You have typed : "+example);
out.println("<BR>");
out.println("");
out.println("</body></html>");
I think starting from this example it is surely easy to modify dynamically the jsp.
The other possibility would be to use the Weblogic Commerce and the LOCALIZE function, so that you'll have an automatic redirection to the right jsp-encoding depending on the customer's language.
Feel free to reply on the forum for any related issue.
Best regards
Nohmenn BABAI
BEA EMEA Technical Support Engineer
"Saurabh" <[email protected]> a écrit dans le message de news: [email protected]...
Is there any way to set the charset encoding dynamically in a JSP
page?
we are using weblogic 6.1 on HP unix.
is there some way we can set the charset dynamically in the page directive
<%@ page contentType="text/html;charset=Shift_JIS" %>
and in MAET tag
<meta http-equiv="Content-Type" content="text/html" charset="Shift_JIS">
Saurabh Agarwal[att1.html]

How to set FileAdapter Append property Dynamically - SOA 11.1.1.3

Similar Messages

Maybe you are looking for