How to set HttpURLConnection timeout while reading a stream?

I want it got time out if the connection if lose while i read a stream from URL
try {
     int timeout = 700;
     HttpURLConnection connection = (HttpURLConnection) downloadURl.openConnection();
     connection.setConnectTimeout(timeout);
     connection.setRequestProperty("Range","bytes=" + downloaded + "-");
     connection.connect();
     if (connection.getResponseCode() / 100 != 2) {
          error();
     int contentLength = connection.getContentLength();
     if (contentLength < 1) {
          error();
     if (status == DOWNLOADING){
          if (size == -1) {
               size = contentLength;
          file = new RandomAccessFile(saveTmpName+".tmp", "rw");
          file.seek(downloaded);
     byte buffer[];
     stream = connection.getInputStream();
connection.setReadTimeout(timeout);
     while (status == DOWNLOADING) { 
          if (size - downloaded > MAX_BUFFER_SIZE) {
               buffer = new byte[MAX_BUFFER_SIZE];
          } else {
               buffer = new byte[(int)(size - downloaded)];
          int read = stream.read(buffer); // how to set timeout while it is reading stream
          if (read <= 0)
               break;
          file.write(buffer, 0, read);
          downloaded += read;
     if (status == DOWNLOADING) {
          status = COMPLETE;
} catch (SocketTimeoutException  e) {
     error();
} catch (IllegalArgumentException e) {
     error();
} catch (Exception e) {
     error();
} finally {
     if (file != null) {
          try {
               file.close();
          } catch (Exception e) {}
     if (stream != null) {
          try {
               stream.close();
          } catch (Exception e) {}
}I try to set "setReadTimeout()" but is still not through timeout Exception

ejp wrote:
Because, there's no FTP client command that allows to do such thing.Socket.setSoTimeout().I agree with you on this one but the OP is talking about the FTPClient API from Apache.
To the OP,
BTW, I have reread the Javadoc about the [*API*|http://commons.apache.org/net/api/org/apache/commons/net/ftp/FTPClient.html] : indeed, there's no setTimeout method, but there is a setDataTimeout method : +Sets the timeout in milliseconds to use when reading from the data connection+ .

Similar Messages

  • How do set operation timeout in tomcat server?

    hi all
    suppose i have one endless loop program(jsp) that program run under tomcat server,
    so it's keep on runing in tomcat server.
    i want, after some time the server send error message like operation timeout.
    how do set operation timeout in tomcat server?
    if anybody know help me.
    my mail id [email protected]

    Well, the server.xml file has connection time outs, but that is for idle time, I think... I'm not sure what would happen in a loop... , especially if you are sending some data back to the client in each iteration. Generally you shouldn't be starting a loop that will really run forever. Maybe have some type of counter to break out if something hasn't occurred within x iterations, or create a separate thread that can sleep for x seconds and set a flag to break the loop after that time.

  • Set a timeout for "read from text file"

    I Need to read from a text file on a remote pc and use the read from text file function to do this. It wotks but sometimes this pc is down causing long wait times in my vi.
    Is there a way to set a timeout for the read from text file function, or is there an other solution?
    Thank you

    You could check that the path is valid first before you attempt to read the file.  hen put the file read in a True-False case structure based on the results of the check.  You can use the function "Check if File or Folder Exists"  It checks whether a file or folder exists on disk at a specified path. This VI works with standard files and folders as well as files in LLB files.   The function is found in the File I/O --> Advanced File Functions palette.
    Tom

  • How to set up iMessage while abroad- no cellular network

    I am currently abroad in Vietnam where Verizon Wireless does not connect; meaning I can only use my iPhone with wifi, in airplane mode. I've been trying to set up iMessage, but keep getting the "Waiting for activation..."- is there anyway to set up iMessage while abroad and unable to connect to my wireless network/receive SMS?
    Thank you for your time!
    Nick

    All antennas are off in airplane mode, so you can't use wi-fi. Try it with cellular data off and while you're on a wi-fi network.

  • How  to Set JMS property and Read JMS property in BPEL using JMS adapter

    Does any one know how to set or read more than one JMS property in BPEL using JMS adapter. My queue server is Oracle JMS server.
    Any help and sample is well appreciated

    Hi Van
    I have noted that only the attribute "type" is missing. It seems that when you create a "string" property, the attribute "type" is droped from the XML. If you use another type (as "integer" or "double") it stays there.
    If you try to read your properties, except for the "type" attribute, you should be successful, as I am. If you need, please tell me your email, I can send you my code.
    Source Code:
    in ASSIGN activity (process which SENDS the JMS message):
    <assign name="TESTES">
    <copy>
         <from expression="'string'"/>
         <to variable="HeaderJms" part="outboundHeader"
         query="/ns5:JMSOutboundHeadersAndProperties/ns5:JMSOutboundProperties/ns5:Property[1]/@type"/>
    </copy>
    <copy>
         <from expression="'name'"/>
         <to variable="HeaderJms" part="outboundHeader"
         query="/ns5:JMSOutboundHeadersAndProperties/ns5:JMSOutboundProperties/ns5:Property[1]/@name"/>
    </copy>
    <copy>
         <from expression="'value1'"/>
         <to variable="HeaderJms" part="outboundHeader"
         query="/ns5:JMSOutboundHeadersAndProperties/ns5:JMSOutboundProperties/ns5:Property[1]/@value"/>
    </copy>
    <bpelx:append>
         <bpelx:from>
         <Property name="" type="" value=""
              xmlns="http://xmlns.oracle.com/pcbpel/adapter/jms/"/>
         </bpelx:from>
         <bpelx:to variable="HeaderJms" part="outboundHeader"
              query="/ns5:JMSOutboundHeadersAndProperties/ns5:JMSOutboundProperties"/>
    </bpelx:append>
    <copy>
         <from expression="'string'"/>
         <to variable="HeaderJms" part="outboundHeader"
         query="/ns5:JMSOutboundHeadersAndProperties/ns5:JMSOutboundProperties/ns5:Property[2]/@type"/>
    </copy>
    <copy>
         <from expression="'name2'"/>
         <to variable="HeaderJms" part="outboundHeader"
         query="/ns5:JMSOutboundHeadersAndProperties/ns5:JMSOutboundProperties/ns5:Property[2]/@name"/>
    </copy>
    <copy>
         <from expression="'value2'"/>
         <to variable="HeaderJms" part="outboundHeader"
         query="/ns5:JMSOutboundHeadersAndProperties/ns5:JMSOutboundProperties/ns5:Property[2]/@value"/>
    </copy>
    </assign>
    in ASSIGN activity (process which READS the JMS message)
    <assign name="Assign_1">
    <copy>
    <from variable="Variable_1" part="inboundHeader"
    query="/ns3:JMSInboundHeadersAndProperties/ns3:JMSInboundProperties/ns3:Property[10]/@name"/>
    <to variable="temp"/>
    </copy>
    <copy>
    <from variable="Variable_1" part="inboundHeader"
    query="/ns3:JMSInboundHeadersAndProperties/ns3:JMSInboundProperties/ns3:Property[10]/@value"/>
    <to variable="temp"/>
    </copy>
    <copy>
    <from variable="Variable_1" part="inboundHeader"
    query="/ns3:JMSInboundHeadersAndProperties/ns3:JMSInboundProperties/ns3:Property[12]/@name"/>
    <to variable="temp"/>
    </copy>
    <copy>
    <from variable="Variable_1" part="inboundHeader"
    query="/ns3:JMSInboundHeadersAndProperties/ns3:JMSInboundProperties/ns3:Property[12]/@value"/>
    <to variable="temp"/>
    </copy>
    </assign>
    Note that I do not try to read the "type" attribute, otherwise it will fail.
    Here is the JMS Header Message received:
    <inboundHeader>
    <JMSInboundHeadersAndProperties xmlns="http://xmlns.oracle.com/pcbpel/adapter/jms/">
    <JMSInboundHeaders>
    <JMSCorrelationID>
    bpel://localhost/pi_lms-c001e/BpelPiAtualizacaoC001E~1.0/3200025-BpInv0-BpSeq1.6-2
    </JMSCorrelationID>
    <JMSDeliveryMode>2</JMSDeliveryMode>
    <JMSExpiration>0</JMSExpiration>
    <JMSMessageID>ID:467DFA1FA1ED459EBF37F51F596C3F12</JMSMessageID>
    <JMSPriority>4</JMSPriority>
    <JMSRedelivered>false</JMSRedelivered>
    <JMSType>com.mercurio.lms.integration.c001eip.c001EIntegrationPoint</JMSType>
    <JMSTimestamp>1201552046253</JMSTimestamp>
    </JMSInboundHeaders>
    - <JMSInboundProperties>
    <Property name="JMSXDeliveryCount" type="integer" value="1"/>
    <Property name="JMSXRecvTimestamp" type="long" value="1201552046698"/>
    <Property name="JMSXUserID" value="lms_dev_int_v1_user"/>
    <Property name="JMS_OracleDeliveryMode" value="2"/>
    <Property name="JMS_OracleTimestamp" type="long" value="1201552046253"/>
    <Property name="JMS_OracleDelay" type="long" value="0"/>
    <Property name="JMSXState" type="integer" value="0"/>
    <Property name="IAS_VERSION" value="10.1.3"/>
    <Property name="JMS_OracleDeliveryMode" value="2"/>
    <Property name="name" value="value1"/> ("type" attribute was droped!!!)
    <Property name="JMS_OracleTimestamp" type="long" value="1201552046253"/>
    <Property name="name2" value="value2"/> ("type" attribute was droped!!!)
    </JMSInboundProperties>
    </JMSInboundHeadersAndProperties>
    </inboundHeader>
    Regards
    Marcelo

  • JDBC / JTA Timeouts : How to set a timeout on the fetching of a query ?

    Hi !
    I'm working on an Application running on Weblogic Server 11g. This app executes a query on an Oracle 11g database ...
    The problem is that this query returns millions of records ... and the app fetches the results during tens of minutes.
    We would like to set a timeout, wich will abandon the transaction, hang the database connection, destroy the socket ... or anything else ...
    This timeout will prevent the thread to become in STUCK state and stucking the weblogic managed server.
    Is this possible ?
    Thank's for your answers.
    Steve.
    Edited by: 966918 on 10 avr. 2013 07:18

    Abandon timeout will not help. That is only used if a database crashes during the second phase of commit. It specifies how long the transaction manager should keep trying to complete the transaction.
    JTA timeout will only work if you are using XA datasources and two-phase commit transactions. When the timeout occurs, it guarantees that the transaction cannot be committed. Eventually, all of the participant resources will be notified and will not allow any more work to take place on the transaction. It does not stop the threads and the application must be written to handle exceptions appropriately.
    Edited by: Steve Felts on Apr 17, 2013 8:32 AM

  • How to set software library while as a preinstallation step of Appl mgmt pa

    Hi All,
    As a pre installation step of Application management pack
    while setting up the software library.
    Iam getting the below error.
    Software Library directory, /u01/oracle10g_grid/grid102_home/oms10g/sysman/prov/paf, is not accessible from following host(s): ceserp.computechcorp.net, ceserp.computechcorp.net. Error Details: Normal preferred credentials are not set for following host(s): ceserp.computechcorp.net, ceserp.computechcorp.net. Follow Preferences > Preferred Credentials > Set Credentials (Host) links to set normal preferred credentials
    Iam getting the above error.
    and how to set the default credentials by the following navigation.
    Enterprise manager version is 10.2.05
    please help me out
    Thanks,
    Vinay

    You can set credentials only for those targets whish are registered in GRID and are visible in console.
    hosts must be already registered and visible in console.. and they must appear in hosts list...
    Once they are visible, then follow the steps to set credentials and there you will find the host name..
    Regards
    Rajesh

  • How to skip first records while reading a csv file

    Hi,
    How to skip the first 5 records while reading csv file.
    I have a file which contains first 5 records as dummy records, I want to skip those records and load the rest into RDBMS.
    How to achieve this?
    Thanks,
    Naveen Suram

    Hi Guru,
    Actually I have converted an excel to CSV format, which is generating first 4 rows as some dummy records. 5th row is my header record. But in hearder record, two column names are same. Thats why while reversing it is giving an error.
    With zero in number of columns in header, I am getting the column names as C1, C2...
    If not in reversing, can we reject the first records while loading into RDMBS table using an interface?
    Thanks,
    Naveen Suram

  • How to set an attribute while creating an XML?

    Hi All,
    I am required to create an XML in the following manner :
    here  <ITEMS ITEMCOUNT="2"> where ITEM is an element and itemcount=2 is the attribute which means their are 2 line items
    - <HEADER>
      <PR_NO>sap pr no</PR_NO>
      <REVISION_NO>0</REVISION_NO>
       </HEADER>
    - <ITEMS ITEMCOUNT="2">
    - <ITEM>
      <PR_LINE_NO>1</PR_LINE_NO>
      <ITEM_DESCRIPTION>Security Locks</ITEM_DESCRIPTION>
      </LOCATIONS>
      </ITEM>
    </items>
    Please suggest how to set the attribute ITEMCOUNT?
    Thanks,
    Lina

    I am also trying to do something similar to this.  I tried the suggestion given but it still only allows 1 parameter.  A snippet of my .icd file is below.
    Attribute (ROI Settings) {
    Value (Integer) {
    Min (0)
    Max (79)
    Increment (1)
    Display {
    Multiplier (8.000000)
    Offset (0.000000)
    Precision (0)
    Units (Pixel)
    Default (0, 0, 0, 0)
    Current (0, 0, 0, 0)
    Action (Serial) {
    Command (ROI %d, %d, %d, %d\r)
    Response ()
    Timeout (1000)
    Delay (100)
    Any answer or help is appreciated.
    Thanks,
    Bruce

  • HT5661 how to set pic display while calling to contact ?

    how to set pic display on calling to contact person ?

    Hello HaD,
    The image control is installed with either the Vision Development Module or the NI-IMAQ driver, and is not a standard component found in LabVIEW.  If you have questions about the image display control or vision functions it would be better to post in the Machine Vision forum:
    http://forums.ni.com/ni/board?board.id=200
    In regards to your question, this menu is not available as a runtime property, and therefore the user of program will not be able to set it directly through the control.  Instead, you will need to allow the user to set it programmatically in LabVIEW by use of a property node. 
    To create this property node, right-click on the image display icon on your program's block diagram, and select:
    Create » Property Node » Palette » Palette Type.
    You will then be able to change the value of this property by right-clicking on the property node icon and selecting "Change All To Write".  To create a control on the front panel that the user change at runtime, right-click on the “Palette Type” input, select:
    Create » Control
    If you have any questions about the application architecture required to implement this design, please continue to post in the LabVIEW forum.
    I hope this helps.
    Best regards,
    Jasper

  • How to set photometricInterpretation property while storing TIFF using JAI?

    I am converting JPG Grey Sale image in to bilevel image and saving in TIFF format with Group IV compression.
    When I view the output TIFF, some applications displaying it properly and some others by inverting the image.
    After a long time, I found that photometricInterpretation property is used to control this property of White_on_Black or Black_on_White in TIFF files.
    In web I have found that, if we use IndexColorModel, then there is no problem. But, I am not using it and I don't know how to set color model of RenderedOp to IndexColorModel. Did anybody know it?
    Is there any other way to set the PHOTOMETRICINTERPRETATION property ?
    Any solution or suggestions are welcome...
    Edited by: baskaraninfo on Nov 20, 2007 7:20 AM

    To view the solution :
    http://www.javaworld.com/javaforums/showflat.php?Cat=2&Number=70133&an=0&page=0#Post70133

  • How to keep screen on while reading something

    While reading some detailed articles on the web in Safari,I face a lot of problem.The screen goes dim and then turns off.
    Is there any way by which I can program my mac in such a way that it automatically detects that I am reading some article and the screen doesn't off or go dim ??
    Thanks

    I don't know of any software that detects when you're reading the screen - that's not to say some doesn't exist.
    I'm sure there used to be an option to elect whether the screen should dim before sleeping/screen saving, but I can't actually find it. I'm on an iMac, maybe it's laptop specific and I haven't got one any more to check.
    At least if it dims first you've got the chance to touch a key/mouse/trackpad to prevent it sleeping.

  • How to set the resolution_column in set_update_conflict_handler of stream

    hi:
    who will tell me the relation between resolution_column and column_list in
    dbms_apply_adm.set_update_conflict_handler of stream? how to set the resolution_column?

    Note: Prebuilt update conflict handlers do not support LOB,
    LONG, LONG RAW, and user-defined type columns. Therefore, you
    should not include these types of columns in the column_list
    parameter when running the SET_UPDATE_CONFLICT_HANDLER
    procedure.
    See Also: "Supplemental Logging for Streams Replication"

  • How to set Command Timeout in Crystal report while calling from C# code

    I am using Crystal report XI R2.  I am calling SQL server 2005 stored procedure as source in the report. I want the report should timeout from the website if the stored procedure doesn't return resultset after 5 minute. Could you please assist how should I chnage the below code to achieve that.
    Code :
    using System;
    using System.Collections.Generic;
    using System.Linq;
    using System.Web;
    using System.Web.UI;
    using System.Web.UI.WebControls;
    using CrystalDecisions.CrystalReports.Design;
    using CrystalDecisions.Shared;
    using CrystalDecisions.Web;
    using CrystalDecisions.CrystalReports.Engine;
    namespace CrystalTest
        public partial class _Default : System.Web.UI.Page
            protected ReportDocument rd;
            protected CrystalReportViewer Crv;
            protected void Page_Load(object sender, EventArgs e)
                rd = new ReportDocument();
                rd.Load(Request.MapPath("FXRate.rpt"));
                SetDBLogonForReport(GetCrvConnectionInfo(), rd);
                ParameterFields crtParamFields;
                ParameterDiscreteValue crtParamDiscreteValue1;
                ParameterField crtParamField1;
                ParameterDiscreteValue crtParamDiscreteValue2;
                ParameterField crtParamField2;
                ParameterDiscreteValue crtParamDiscreteValue3;
                ParameterField crtParamField3;
                ParameterDiscreteValue crtParamDiscreteValue4;
                ParameterField crtParamField4;
                ParameterDiscreteValue crtParamDiscreteValue5;
                ParameterField crtParamField5;
                ParameterDiscreteValue crtParamDiscreteValue6;
                ParameterField crtParamField6;
                crtParamFields = new ParameterFields();
                crtParamDiscreteValue1 = new ParameterDiscreteValue();
                crtParamField1 = new ParameterField();
                crtParamDiscreteValue1.Value = "USD";
                crtParamField1.ParameterFieldName = "@BaseCurrCode";
                crtParamField1.CurrentValues.Add(crtParamDiscreteValue1);
                crtParamFields.Add(crtParamField1);
                crtParamDiscreteValue2 = new ParameterDiscreteValue();
                crtParamField2 = new ParameterField();
                crtParamDiscreteValue2.Value = "EUR";
                crtParamField2.ParameterFieldName = "@CounterCurrCode";
                crtParamField2.CurrentValues.Add(crtParamDiscreteValue2);
                crtParamFields.Add(crtParamField2);
                crtParamDiscreteValue3 = new ParameterDiscreteValue();
                crtParamField3 = new ParameterField();
                crtParamDiscreteValue3.Value = "2008-05-28 00:00:00";
                crtParamField3.ParameterFieldName = "@FromDate";
                crtParamField3.CurrentValues.Add(crtParamDiscreteValue3);
                crtParamFields.Add(crtParamField3);
                crtParamDiscreteValue4 = new ParameterDiscreteValue();
                crtParamField4 = new ParameterField();
                crtParamDiscreteValue4.Value = "2008-05-28 00:00:00";
                crtParamField4.ParameterFieldName = "@ToDate";
                crtParamField4.CurrentValues.Add(crtParamDiscreteValue4);
                crtParamFields.Add(crtParamField4);
                crtParamDiscreteValue5 = new ParameterDiscreteValue();
                crtParamField5 = new ParameterField();
                crtParamDiscreteValue5.Value = "ashok12";
                crtParamField5.ParameterFieldName = "@CurrentUser";
                crtParamField5.CurrentValues.Add(crtParamDiscreteValue5);
                crtParamFields.Add(crtParamField5);
                crtParamDiscreteValue6 = new ParameterDiscreteValue();
                crtParamField6 = new ParameterField();
                crtParamDiscreteValue6.Value = DateTime.Now.ToString("dd MMM yyyy hh:mm");
                crtParamField6.ParameterFieldName = "@ClientTime";
                crtParamField6.CurrentValues.Add(crtParamDiscreteValue6);
                crtParamFields.Add(crtParamField6);
                Crv.ParameterFieldInfo = crtParamFields;
                Crv.DisplayGroupTree = false;
                Crv.BestFitPage = true;
                Crv.ReportSource = rd;
            private void SetDBLogonForReport(ConnectionInfo connectionInfo, ReportDocument reportDocument)
                Tables tables = reportDocument.Database.Tables;
                foreach (CrystalDecisions.CrystalReports.Engine.Table table in tables)
                    TableLogOnInfo tableLogonInfo = table.LogOnInfo;
                    tableLogonInfo.ConnectionInfo = connectionInfo;
                    table.ApplyLogOnInfo(tableLogonInfo);
            public static CrystalDecisions.Shared.ConnectionInfo GetCrvConnectionInfo()
                CrystalDecisions.Shared.ConnectionInfo con = new CrystalDecisions.Shared.ConnectionInfo();
                con.ServerName = System.Configuration.ConfigurationSettings.AppSettings["conServer"].ToString();
                con.DatabaseName = System.Configuration.ConfigurationSettings.AppSettings["conDatabase"].ToString();
                con.UserID = System.Configuration.ConfigurationSettings.AppSettings["sesUser"].ToString();
                con.Password = System.Configuration.ConfigurationSettings.AppSettings["sesPwd"].ToString();
                return con;
            private void Page_Unload(object sender, System.EventArgs e)
                if (rd != null)
                    rd.Close();
                    rd.Dispose();
                if (Crv != null)
                    Crv.HasCrystalLogo = false;
                    Crv.Dispose();

    Yes it is possible to use datasets. resources listed below. One hting to be aware of; Using datasets larger than about 5,000 records (depending on the report) is not advisable. Performance will potentially be an issue with datasets that are too large.
    Crystal Reports Guide To ADO.NET
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/401c4455-a31d-2b10-ae96-fa57af5aec20
    Reporting Off ADO.NET Datasets
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2091d0c3-da1d-2b10-22be-a3426b183f75
    VS2005_Walkthroughs
    http://www.businessobjects.com/global/pdf/dev_zone/VS2005_Walkthroughs.pdf
    VB samples:
    https://smpdl.sap-ag.de/~sapidp/012002523100006252822008E/net_win_smpl.exe
    In the above samples see VBNET_WIN_ADODOTNET
    C# samples
    https://smpdl.sap-ag.de/~sapidp/012002523100006252722008E/csharp_win_smpl.exe
    BTW., notes databse is here:
    https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_ossnotes&query=&adv=true
    Articles can be searched here;
    https://www.sdn.sap.com/irj/sdn/businessobjects-articles
    Ludek
    Edited by: Ludek Uher on Feb 17, 2009 1:22 PM

  • How to set session timeout per user

    Hi,
    Ho do I set the session timeout per User in the
    Application.cfm File??
    I tried using
    <cfif SESSION.UID EQ 1>
    <CFAPPLICATION NAME="appControl" SESSIONMANAGEMENT="Yes"
    sessiontimeout="#CreateTimeSpan(0,0,20,0)#">
    </cfelse>
    <CFAPPLICATION NAME="appControl" SESSIONMANAGEMENT="Yes"
    sessiontimeout="#CreateTimeSpan(1,0,0,0)#">
    </cfif>
    But this didnt work because the cfapplication seems to have
    to be at the top before I call the variable SESSION.UID which
    I set on my login page..
    Someone know how to do this??
    Regards
    Martin

    Martin,
    Your code example cannot work because the "session" scope
    doesn't exist until your application scope is defined. So you have
    to handle this manually. Here's how you can get it done. First,
    define your application to the maximum sessiontimeout you want to
    have.
    <CFAPPLICATION NAME="appControl" SESSIONMANAGEMENT="Yes"
    SESSIONTIMEOUT="#CreateTimeSpan(1,0,0,0)#">
    Then, I don't know how you are doing your login
    authentication but when you have authenticated the user, you need
    to define the userid and the most recent activity in the session.
    Also determine your timeout value based on the userid. See example:
    <CFIF IS_AUTHENTICATED>
    <CFSET session.user.uid = form.userid>
    <CFSET session.user.most_recent_activity = now()>
    <CFIF session.user.id eq 1>
    <CFSET session.user.timeout_mins = 20>
    <CFELSE>
    <CFSET session.user.timeout_mins = 1440>
    </CFIF>
    </CFIF>
    Now, all you have to do is check whether the user has been
    idle for too long and kill the session by purging all session
    variables. For example:
    <!--- if user id is defined, this means user is logged in
    --->
    <CFIF structKeyExists(session, "user") and
    structKeyExists(session.user, "id")>
    <!--- check if timeout has expired --->
    <CFIF datediff("n", session.user.most_recent_activity,
    now()) gt session.user.timeout_mins>
    <!--- timeout has expired, kill the session and log the
    user out --->
    <CFSET StructClear(session)>
    <!--- insert your logout code here --->
    <CFELSE>
    <!--- user hasn't timed out, so reset the most recent
    activity to now --->
    <CFSET session.user.most_recent_activity = now()>
    </CFIF>
    </CFIF>

Maybe you are looking for

  • Dynamic af:inputListOfValues causes NullPointerException

    Hi Gurus, We are using JDeveloper 11.1.3. Currently we are building a dynamic LOV (sort of) based on an existing listOfValuesModel in PageDef.xml. The existing af:inputListOfValues was built at design time with the listOfValuesModel. The goal is to s

  • Help on workflow event container creation.

    Can any one tell me how to create event containers in workflow? If the steps will be given in details it will be very help.Pls

  • G5 starting to have issues with waking up and powering on

    Just started happening two nights ago. I hit the keyboard to wake up my G5 and heard a clicking noise. I noticed that the light on the power button would light up as it tried to wake up but it would be unsuccessful. It kept trying to wake up but neve

  • How can i work with Mysql using socket

    hi When i connect through mysql using socket then can i send a query to mysql through socket. if yes then how retrive data which is performed by query plz help me THANKS

  • Web Auth logout windows shows IP address as URL vs DNS

    We are using Web Auth with DNS name which works fine. We did notice however that upon successful login that the logout popup page displays the logut url with the IP address and not the DNS. Is this a bug? Runnig WCS 4.2.62.0 WLC 4.2.112.0