How to set item level permission for list item in SharePoint 2013

Hi we had a custom List "ABC".
List had 2 columns:
Project Name: (P1, P2, P3, P4, P5, P6)
Project Leads: (PL1, PL2, PL3, PL4, PL5, PL6).
All project Leads can have permission to edit only their Project (P1, P2, P3) like
PL1 can edit P1
PL2 Can edit P2.....
But my Question is how to restrict PL2 cannot have permission to edit P1
is it possible to set permission for this through OOTB in SharePoint 2013.
Any help will be appreciated......

Hi
check this similar post
http://social.technet.microsoft.com/Forums/ro-RO/e1ea3655-0c6f-4b3d-a336-c42e8eb54c09/rights-to-edit-own-items-for-list-residing-on-publishing-site?forum=sharepointdevelopmentprevious
Romeo Donca, Orange Romania (MCSE, MCITP, CCNA) Please Mark As Answer if my post solves your problem or Vote As Helpful if the post has been helpful for you.

Similar Messages

Create search refiner for list name in sharepoint 2013

Hi everybody!
How could I create a search refiner for list name in SharePoint 2013?? I think I can create a search refiner for list ID but how could I show list name base on list id to users in refinement webpart??

you can create your custom Manged property and use content enrichment to fill the managed property
http://blogs.msdn.com/b/richard_dizeregas_blog/archive/2013/06/19/advanced-content-enrichment-in-sharepoint-2013-search.aspx
Hope that helps|Amr Fouad|MCTS,MCPD sharePoint 2010

How to set application access type for list of users

Hi everybody,
I've an requirement to automise the application access type setting in shared services.
When i searhed to do with MaxL scripts.I'm able to set the application access type for a single user using
alter user 'username' add application access type essbase
alter user 'username' add application access type planning
But,i've to perform this as a daily activity updating for list of users.Is there away to do it..??..i want to pass the list of users to the above alter user command.??
Please help me.
Cheers
Saran
Edited by: user11396937 on Aug 27, 2010 2:09 AM

I discovered that changing "Image interpolation" optioon in general preferences of Photoshop has direct influence on smart object interpolation type. You can even reinterpolate smart object after changing image interpolation in preference. Just click ctrl + t and enter.

How to build high usability navigation for Power View on SharePoint 2013?

I have Power View on SharePoint 2013. I have both SSAS Multidimentional and Tabular model in use.
I have several Report.drlx file in Report libary in SharePoint.
When I click the file, it works fine, but I feel that there are usability problems like:
A) Getting back to SharePoint site is not intuitive. Difficult to find home.
B) Diffucult to move between report to another. Need to return Document library.
What is best practise for displaying several Power View reports on SharePoint?
Kenny_I

Hi Kenny_I,
Just as you said, we cannot directly navigate to Home page when we view an .rdlx report in SharePoint site. We need click the Arrow to go to the previous page (Document Library), then click “Home” to navigate to Home page. If we want to move from a report
to another report, we should still use the same way. This is by design.
If you want to jump from one report to another report, we can add a hyperlink to a text box in a sheet or view. Personally, I understand your feeling and how frustrated when you find this issue. So, it is my pleasure to help you to reflect your recommendation
to the proper department for their consideration. Please feel free to submit your situation on our product to the following link:
https://connect.microsoft.com/.Your feedback is valuable for us to improve our products and increase the level of service provided.
Thank you for your understanding.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Set unique file name for document library in SharePoint 2013

Hi,
I have document library in the sharepoint 2013 with two dropdown fields-dept name,dept id.
My requirement is to create a namiing convention for each file uploded in the document library.
So the naming convention should be "deptname-deptid-filename-Id".
I tried this naming convention using workflow as below-
In this case ,first I attach the file and then it asks for dept name & id,Whwn i input these value,it shows error message as this file is modified by you at this point of time.On cancel it saves the attached file but does not save the deptname and dept
id.
please help if any idea or suggestion.
Thank you.

The only way I've ever seen this work while adding a new file is to use an Event Reciever. Build an Event
Receiver that fires whenever a file is added and have the code change the name of the file from whatever the user titled it to the naming convention you are using.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

How to set default sharing permission for new files???

Hello. I have an imac 24" and a macbook pro 15". they are connected over an airport network. i have file sharing set up, which is working great. i am having one problem though.
whenever a file is created on either computer, it defaults to only allow the other computer to access it read only. is there a way to set a preference that will make all new files that are created to have read & write permission by the other computer????

the easiest way to do that is to connect from one computer to the other not as a guest but as a registered user. then any files you create will be owned by that user. so if you have user1 on imac and user2 on mbp connect from the imac to the mbp as user2.

Hide view links in list view in sharepoint 2013

Hi
How I can hide view links in list view in sharepoint 2013. Like below pic?
Thanks.

for that you can use id of its parent span element something like below.
#WPQ2_ListTitleViewSelectorMenu_Container {
display: none !important;
Thanks.

How to set up automatic payment for the purchase order

Hi, All,
I have one question how to set up automatically payment for the Rent Office purchase Order?
There is the requirement from the client. They want to create one kind of purchase order for the Office Rent, then pay the fees in the certain time of every month to the vendor for the rent fees without any invoice. Whatu2019s the normal solution for this kind of purchase order? Is it ERS? Or something else?
Please give me the details and business flow. Also please tell me how to setup in the SAP and T-code.
Thanks in advance

Either you can set up ERS or you can pay directly from the FI side.
Prerequisites
Evaluated receipt settlement must be flagged in the purchase order item.
The vendor must be flagged as being subject to ERS in the vendor master record.
The goods receipt must refer to a purchase order.
Goods-receipt-based Invoice Verification must be defined for the purchase order item.
A tax code must have been maintained in the purchase order item.
The order price of the materials may not be an estimated price.
If you flag a vendor as being subject to ERS, the system sets the ERS indicator as a default in each item when you create a purchase order for the vendor. You can prevent this happening for certain vendors by flagging the info record for the material and the vendor as not being subject to ERS.
In Purchasing, you can delete the default ERS indicator in a purchase order item.
Choose Logistics Invoice Verification ® Automatic Settlement ® Evaluated Receipt Settlement (ERS).
The selection screen appears.
You can use the following criteria to narrow down selection of the transactions to be settled:
Company code
Plant
Goods receipt posting date
Goods receipt document
Fiscal year of the goods receipt
Vendor
Purchase order and order item
You can define the selection criteria for the invoice documents by:
Delivery
Purchase order
Purchase order item
Goods receipt document
Credit memo
Invoice
Currency
Choose Execute.
The system issues a log for Evaluated Receipt Settlement, which displays the following:
Settled
In line with your selection criteria, the system displays all the order items that were settled (or if you are working in test mode, which would have been settled).
Could not be settled
In line with your selection criteria, the system displays all order items for which ERS is defined but could not be settled. It also lists the reasons.
If the system reports being unable to invoice a transaction, you should exclude the transaction from ERS to avoid it being included in the log the next time ERS is run.
Select the item and choose Exclude from ERS.
The system also generates and possibly sends a message to inform the vendor(s) about the transaction settled, depending on the settings in Customizing.
You can display the following environment information for the order items selected. To do this, choose Goto ®:
Display purchase order
Display invoice
Display material document
Display long text

How to set a new value for formula field in crystal reports xi?

How to set a new value for formula field in crystal reports xi?//formula{@description} exemplo in VB6crxSubreport.FormulaFields.Item(1).Text = "'Subreport Formula'" orcrxSubreport.FormulaFields.Item("description").Text = "'Subreport Formula'"How to in JRC? 

Hi,
This functionality is known to be very important and is a key part of the next major release of the JRC planned for the first half of 2008.
Regards,
Blair Wheadon
Product Manager, Crystal Reports

How to change the permission of a folder of a website hosted on Microsoft Azure. I would like to know how to enable read write permission for this folder

How to change the permission of a folder of a website hosted on Microsoft Azure. I would like to know how to enable read write permission for this folder
Regards,
John

Hi,
Please try to setting Folder Permissions on Web Publish, and then deploy it with Web Deploy, as far as I know, if we do that, Web Deploy will use the SetAcl operation to change permissions. Please have a look at the article below.
#http://sedodream.com/2011/11/08/settingfolderpermissionsonwebpublish.aspx
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

C How to Set Isolation Level in the Connection String

How to Set Isolation Level in the Connection String using the "Microsoft OLE DB Provider for DB2 Version 4.0"?
We are trying to move from Crystal Reporting that run against a IBM DB2 database on a mainfram to SSRS reporting and we have downloaded the "Microsoft OLE DB Provider for DB2 Version 4.0" and then worked with the DB2 Administrator to create the
Packages. We only have access to use the "Read Uncommitted ("MSUR001") package. We were able to connect and pull data before he removed access to the other packages, but after setting access the Connection keeps trying to use
the 'Cursor Stability (MSCS001)" package. How do we change the Default to the "Read Uncommitted ("MSUR001") package??? Since it is keeps defaulting to the the other package
we can't connect to do it in the T-SQL query, it has to be set at the Connection String level.

Hi Dannyboy1263,
According to your description, you want to set the Transaction Isolation Level in Connection String. Right?
In Reporting Services, the Connection String for OLE DB Connection can only contains Provider, Data Source and Initial Catalog. There's no property for setting Transaction Isolation Level in the Connection String. Based on my knowledge, we can
only set the Transaction Isolation Level at Query level or set it by using code (C#, VB, Java...) to call the property of Connection. So unfortunately your requirement can't be achieved currently.
Reference:
OLE DB Connection Type (SSRS)
Data Connections, Data Sources, and Connection Strings in Reporting Services
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

How to set item #2 in a JCombobox as selected default ?

JCombobox always set item #1 as default.
How to set item #2 or #3 or another # (except #1) as selected default ?

hey,
there is a method called setSelectedIndex(int index)
pass the index which u want to get selected by default.
Call this method after loading the data to the comboBox
for ex cbo.setSelectedIndex(1);
Hope this helps
Nagaraj

SRM 4.0- How to set the default values for product type (01) only for SC

The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.

The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF

How to set up Airport Extreme for 11ac and 11n?

I have just purchased the new Airport Extreme (August 2014) because Apple's website states
Simultaneous dual-band support.
AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
I have number of Macs in my home from a new MacBook Pro with Mavericks to a Macbook Air with Snow Leopard (due to required software) and iPads.
So after setting up the new Extreme my new MacBook only accesses 11n as does my older Macs. I checked by holding down the option key while clicking the WiFi icon at the top of my Mac. Well, not so automatic then as I was expecting 11ac and 3 times faster access (as stated by Apple).
I then looked for some documentation for setting up but cannot find anything.
Hence my question here.
How to set up Airport Extreme for 11ac and 11n simultaneously?
At present the new Extreme is no better than my previous 2 year old one.
Thank you.
Michael

How to set up Airport Extreme for 11ac and 11n simultaneously?
Assuming that it is operating correctly, 802.11ac and 802.11b/g/n are broadcast simultaneously by default.
Simultaneous dual-band support.
AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
That is advertising. The real information is usually found in the small and hard to read footnotes:
Based on theoretical peak speeds. Actual speeds will be lower.
AirPort Extreme is based on an IEEE 802.11ac draft specification. Performance based on comparison with Apple’s 802.11n products. Comparison assumes AirPort Extreme network with 802.11ac-enabled computer. Speed and range will be less if an 802.11a/b/g product joins the network. Accessing the wireless network requires a Wi‑Fi-enabled device. Actual speed will vary based on range, connection rate, site conditions, size of network, and other factors. Range will vary with site conditions.
Since the 802.11ac signal is being broadcast only using the 5 GHz band, some users report that they have had better results by using the option to assign a different name to the 5 GHz band, and then pointing their Mac to that specific signal or network. You may want to try that option.
But first as a test, please locate the MacBook Pro about 10-15 feet or 3-4 meters from the AirPort Extreme with clear line-of-sight between the two devices. Restart both the AirPort Extreme and the Macbook Pro and then check to see if the Mac is connected to an 802.11ac signal.
If not, please power off your other wireless devices...computers, mobile devices, etc. temporarily, and try the same test again.
Please report on your results.

How to set-up a Timestamp for BI Delta Load in 0CLM_INVOICE datasrc at R/3?

Hi Experts,
Kindly let me know How to set-up a Timestamp for BI delta load at R/3 for the Data source 0CLM_INVOICE ?
Since the Timestamp for Upload of BI Delta is " . . : : ", we are not getting any delta value to BW.
I would like to know in where we need to maintain the DATE & TIME to fix the above problem.
Thanks.
Regards,
Jayaprakash J

Dear Jayprakash,
Chech the below links, it may help you in your case :
Re: 0FI_AA_11 Delta load failure
http://wiki.sdn.sap.com/wiki/display/BI/GeneralErrorIn+BI
Actaully you need not have to maintain the timestamp. Just try to replicate your datasource and the try to load the delta again.
Hopefully it will work.
Regards,
Rahul
Edited by: Rahul on Dec 10, 2010 10:23 AM

How to set item level permission for list item in SharePoint 2013

Similar Messages

Maybe you are looking for