How to set JMenu/JMenuItem.accelerator property in Inspector

How do you set an accelerator key through the accelerator
property in the inspector for a JMenu or JMenuItem object? The
list box contains one item, "<none>". Does one have to create
some special keyboard shotcut objects that then will be added to
the list?
Where can one find documentation for the Swing classes, as far
as I can see it's not included?
Thanks.
Finn Ellebaek Nielsen
ChangeGroup ApS
null

I know how to do it in the code but it must be possible to do it
from the Inspector since the property is listed there?
Thanks.
Finn
JDeveloper Team (guest) wrote:
: Finn,
: I would check the Swing documentation available from the
Javasoft
: website for more information on these controls.
: -L
: Finn Ellebaek Nielsen (guest) wrote:
: : How do you set an accelerator key through the accelerator
: : property in the inspector for a JMenu or JMenuItem object?
The
: : list box contains one item, "<none>". Does one have to
create
: : some special keyboard shotcut objects that then will be
added
: to
: : the list?
: : Where can one find documentation for the Swing classes, as
far
: : as I can see it's not included?
: : Thanks.
: : Finn Ellebaek Nielsen
: : ChangeGroup ApS
null

Similar Messages

How to set the read only property for dynamic ALV column

Hi All,
I have built one dynamiv ALV and I have one name column inside that ALV for which I have to set read only property based on two column fields that exist in the same ALV,say IS_SP and IS_CORP of type boolean.
If any one of the flag is 'X',i have to make that name column as display only and
If both flag are not set,it should be displayed as ediatable column.
I have written one method as INIT_ALV which gets called when ALV is loaded.
Code is as follows:
lr_column_settings ?= wd_this->alv_all_roles.
lt_columns = lr_column_settings->get_columns( ).
LOOP AT lt_columns INTO ls_column.
CASE ls_column-id.
   WHEN <NAMECOLUMN>. "name column which should be editable/display
Create Input Field
        CREATE OBJECT lr_uie_input_field_ro
          EXPORTING
            value_fieldname = ls_column-id.
     ls_column-r_column->set_cell_editor( lr_uie_input_field_ro ).
    After this,I have to set the read only property based on IS_SP and IS_CORP values,
          CALL METHOD lr_uie_input_field_ro->set_read_only_fieldname
          EXPORTING
            *value = 'IS_SP' or 'IS_CORP'
ENDLOOP.
I dont want to use cell variants also.
Help me to achieve this.
Thanks and Regards,
Divya

Divya - I have done it in the past following these documents. Please read it and try it it will work.
Please read it in the following order since both are a continuation documents for the same purpose (it also contains how to change colors of row dynamically but I didnt do that part I just did the read_only part as your requirement)
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0625002-596c-2b10-46af-91cb31b71393
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0155eb5-b6ce-2b10-3195-d9704982d69b?quicklink=index&overridelayout=true
thanks!
Jason PV

How to set "Maximum Lenght" column property for database block at RUNTIME?

Hi folks,
Is it possible to somehow set a "Maximum Length" property for database block column at runtime?
I have a dynamic form, which maintains mostly "STATIC DATA" within all application which are stored in different static data tables (which have similar structure). But now, description column in some of those tables was extended (not in all at this stage). I would like to avoid truncating form error while reading data from those extended tables, so I would like to set an MAXIMUM SIZE to accurate value at the time when I'm specifying TABLE NAME for that database block.
What property should I use to set it?
   -- before executing query in "MAIN_BLOCK" I always set QUERY_DATA_SOURCE_NAME to user defined value => STATIC DATA TABLE name
   Set_block_Property('MAIN_BLOCK',QUERY_DATA_SOURCE_NAME,:control.table_name);
   Set_block_Property('MAIN_BLOCK',DML_DATA_TARGET_NAME,:control.table_name);
   -- here I would like to set also MAXIMUM LENGHT for particular column (based on some condition, etc.. correct value I can get from ALL_TAB_COLS dictionary
   SET_ITEM_PROPERTY('MAIN_BLOCK.DESCRIPTION', <<XXXXXXX>>, 300);What should I use instead of "<<XXXXXXX>>" if I want to overwrite MAIN_BLOCK.DESCRIPTION column's maximum length to 300?
Thanks,
Tomas

Hi Magoo, thanks for reply.
Yes, but then user can get other errors while trying to set description with value longer than in database (for all not extended tables).
Aby idea how to implement SET_CUSTOM_PROPERTY like mentioned here?
Oracle Forms - "maximum length" property.
Thanks,
Tomas

How to set the disable,visible property in declarative components.

We have used one declarative component. It consists of 5 buttons (add,delete,save,delete,print). In all of our pages, this declarative component is used. We could bind methods and was able to use each pages seperately (by linking the methods in the backing bean)
But for implementing the DISABLE,VISIBLE properties, we have added the attributes for this and refered this to the corresponding disable and visible property of the button. In the page all these properties where reflected. But at the runtime these buttons are not coming.
Can anyone advise how can we set the disable,visible property in declarative components.

Hi vikram ,
i hvnt initialized the properties ,
in my declarative component i have one button say Save button and i want to config 2 properties Disable and Visible
i added two attributes ( java.lang.Boolean ) say disablr_btn ,*visible_btn* and mapped wth the Save button Properties Disabled and Visible using expressions
Now the button is invisible while running the page.
if i remove the mapping from properties Disable and visible , the button is visible
should i init the properties in faces config , i dnt knw hw to init the properties
pls advice

How to Set "file.encoding" System Property to default "UTF-8"

When i execute my code some special character are not being display correct so by programming approach i am trying to set "file.encoding" system property to "UTF-8", using command System.setProperty( "file.encoding", "UTF-8" ); and it is not working.
If i run my jar using command java -Dfile.encoding=UTF-8 -jar myprog.jar . It is working and my special characters are also looking in right way.
Can i set this defalut encoding by programming approach.
Thanks
Ashish Pancholi

Hello,
I have the same problem. I have a java prog that is started with "-Dfile.encoding=ISO-8859-1". Now in this program I want to print some characters using the UTF-8 encoding because I know that the terminal I will be printing on has this encoding. I tried using InputStramReader without success:
    InputStreamReader isr = new InputStreamReader(new ByteArrayInputStream("Müller".getBytes()), "UTF-8");
    BufferedReader br = new BufferedReader(isr);
    String line = null;
    while ((line = br.readLine()) != null) {
        System.out.println(line);
    }EDIT:
the above example is to read something into my java program. If I want to write something from my java class to an output it goes like this:
Writer out = new BufferedWriter(new OutputStreamWriter(System.out, "UTF8"));
out.write("Müller\n");
out.flush();... in that case I get the correct encoding.
Thanks,
T

Forms 10g : How to set the Database Item property for an item dynamically ?

Hello all,
I have a requirement where I need to set the database item property of an item to TRUE/FALSE
dynamically at runtime based on certain conditions.
Earlier, in forms 6i I've used,
Set_Item_Property (<item_name>, DATABASE_ITEM, PROPERTY_TRUE);
But in Forms 10g it doesn't recognize this Database_Item property and gives a compilation error.
Have I overlooked something or has this property become obsolete in Forms 10g ?
If obsoleted what is the replacement property ?
Regards,
Sam

Some options:
1. Create a database-view, including the "real" column in databases where it exists and a "dummy"-column in databases where it doesn't exist.
If that's not possible,
2. set database="No" for your item and
-- create a POST-QUERY-trigger which reads the data for that column from the database, if the column exists, and
-- create a ON-UPDATE-trigger which includes an
UPDATE_RECORD;
UPDATE THETABLE SET
THECOLUMN=thevalue
WHERE ROWID=:THEBLOCK.ROWID;3. Base your block on either a select-from-clause, a ref-cursor or a procedure to adjust he query-part,, for saving use a procedure.

How to get name of table cell ? Also, how to set name and label property on table itself?

I am trying to use below API:
PMString tableName = "myTable";
ErrorCode error = Utils<Facade::IPageItemNameFacade>()->SetUserAssignedPageItemName(tableUIDRef, tableName);
But this is not setting up the table name, also I am getting error = 1.
Also, I am not getting the API to get the name of table cell(which is the read only property)

Hello kapoor_aman27,
a table is not a page item. The page item name is stored in the interface IPageItemName of the kDrawablePageItemBoss. So you must get the page item of your table and set the name of the page item.
Markus

How to set a value when right click on af:commandlink ?

Hi All,
JDev Ver : 11.1.1.4.0
How to set a value to property listener on right click of a commandLink ?
I am having values that are hyper linked using af:commandlink, when i right click on hyperlink, that value i need to get in the managed bean ?
(While right click i am populating on menu item)
how to get the value ?
Give some solutions ?
thanks
Gopinath

Hi,
Try this code:
<af:clientListener method="rightClick"
type="contextMenu"/>
<af:serverListener type="setValue"
method="#{beanName.setValueMethodName}"/>
<trh:script xmlns:trh="http://myfaces.apache.org/trinidad/html"
id="s13">rightClick = function(event) {
var source = event.getSource();
AdfCustomEvent.queue( source, "setValue"
, {}, false); }
</trh:script>

How to set dynamic parameter in list of values in parameter property

Hi,
I am using cr4e-all-in-one-win_2.0.1version.I have created .rpt file in that how to set dynamic parameters(from database) in list of values parameter property
Regards,
amol

Hi,
I am using cr4e-all-in-one-win_2.0.1version.I have created .rpt file in that how to set dynamic parameters(from database) in list of values parameter property
Regards,
amol

How to Set JMS property and Read JMS property in BPEL using JMS adapter

Does any one know how to set or read more than one JMS property in BPEL using JMS adapter. My queue server is Oracle JMS server.
Any help and sample is well appreciated

Hi Van
I have noted that only the attribute "type" is missing. It seems that when you create a "string" property, the attribute "type" is droped from the XML. If you use another type (as "integer" or "double") it stays there.
If you try to read your properties, except for the "type" attribute, you should be successful, as I am. If you need, please tell me your email, I can send you my code.
Source Code:
in ASSIGN activity (process which SENDS the JMS message):
<assign name="TESTES">
<copy>
     <from expression="'string'"/>
     <to variable="HeaderJms" part="outboundHeader"
     query="/ns5:JMSOutboundHeadersAndProperties/ns5:JMSOutboundProperties/ns5:Property[1]/@type"/>
</copy>
<copy>
     <from expression="'name'"/>
     <to variable="HeaderJms" part="outboundHeader"
     query="/ns5:JMSOutboundHeadersAndProperties/ns5:JMSOutboundProperties/ns5:Property[1]/@name"/>
</copy>
<copy>
     <from expression="'value1'"/>
     <to variable="HeaderJms" part="outboundHeader"
     query="/ns5:JMSOutboundHeadersAndProperties/ns5:JMSOutboundProperties/ns5:Property[1]/@value"/>
</copy>
<bpelx:append>
     <bpelx:from>
     <Property name="" type="" value=""
          xmlns="http://xmlns.oracle.com/pcbpel/adapter/jms/"/>
     </bpelx:from>
     <bpelx:to variable="HeaderJms" part="outboundHeader"
          query="/ns5:JMSOutboundHeadersAndProperties/ns5:JMSOutboundProperties"/>
</bpelx:append>
<copy>
     <from expression="'string'"/>
     <to variable="HeaderJms" part="outboundHeader"
     query="/ns5:JMSOutboundHeadersAndProperties/ns5:JMSOutboundProperties/ns5:Property[2]/@type"/>
</copy>
<copy>
     <from expression="'name2'"/>
     <to variable="HeaderJms" part="outboundHeader"
     query="/ns5:JMSOutboundHeadersAndProperties/ns5:JMSOutboundProperties/ns5:Property[2]/@name"/>
</copy>
<copy>
     <from expression="'value2'"/>
     <to variable="HeaderJms" part="outboundHeader"
     query="/ns5:JMSOutboundHeadersAndProperties/ns5:JMSOutboundProperties/ns5:Property[2]/@value"/>
</copy>
</assign>
in ASSIGN activity (process which READS the JMS message)
<assign name="Assign_1">
<copy>
<from variable="Variable_1" part="inboundHeader"
query="/ns3:JMSInboundHeadersAndProperties/ns3:JMSInboundProperties/ns3:Property[10]/@name"/>
<to variable="temp"/>
</copy>
<copy>
<from variable="Variable_1" part="inboundHeader"
query="/ns3:JMSInboundHeadersAndProperties/ns3:JMSInboundProperties/ns3:Property[10]/@value"/>
<to variable="temp"/>
</copy>
<copy>
<from variable="Variable_1" part="inboundHeader"
query="/ns3:JMSInboundHeadersAndProperties/ns3:JMSInboundProperties/ns3:Property[12]/@name"/>
<to variable="temp"/>
</copy>
<copy>
<from variable="Variable_1" part="inboundHeader"
query="/ns3:JMSInboundHeadersAndProperties/ns3:JMSInboundProperties/ns3:Property[12]/@value"/>
<to variable="temp"/>
</copy>
</assign>
Note that I do not try to read the "type" attribute, otherwise it will fail.
Here is the JMS Header Message received:
<inboundHeader>
<JMSInboundHeadersAndProperties xmlns="http://xmlns.oracle.com/pcbpel/adapter/jms/">
<JMSInboundHeaders>
<JMSCorrelationID>
bpel://localhost/pi_lms-c001e/BpelPiAtualizacaoC001E~1.0/3200025-BpInv0-BpSeq1.6-2
</JMSCorrelationID>
<JMSDeliveryMode>2</JMSDeliveryMode>
<JMSExpiration>0</JMSExpiration>
<JMSMessageID>ID:467DFA1FA1ED459EBF37F51F596C3F12</JMSMessageID>
<JMSPriority>4</JMSPriority>
<JMSRedelivered>false</JMSRedelivered>
<JMSType>com.mercurio.lms.integration.c001eip.c001EIntegrationPoint</JMSType>
<JMSTimestamp>1201552046253</JMSTimestamp>
</JMSInboundHeaders>
- <JMSInboundProperties>
<Property name="JMSXDeliveryCount" type="integer" value="1"/>
<Property name="JMSXRecvTimestamp" type="long" value="1201552046698"/>
<Property name="JMSXUserID" value="lms_dev_int_v1_user"/>
<Property name="JMS_OracleDeliveryMode" value="2"/>
<Property name="JMS_OracleTimestamp" type="long" value="1201552046253"/>
<Property name="JMS_OracleDelay" type="long" value="0"/>
<Property name="JMSXState" type="integer" value="0"/>
<Property name="IAS_VERSION" value="10.1.3"/>
<Property name="JMS_OracleDeliveryMode" value="2"/>
<Property name="name" value="value1"/> ("type" attribute was droped!!!)
<Property name="JMS_OracleTimestamp" type="long" value="1201552046253"/>
<Property name="name2" value="value2"/> ("type" attribute was droped!!!)
</JMSInboundProperties>
</JMSInboundHeadersAndProperties>
</inboundHeader>
Regards
Marcelo

HT1841 How to disable some of the automatic function from my bluetooth (jabra) while iphone does not have the capacity to set up the bluetooth property like BB?

How to disable some of the automatic function from my bluetooth (jabra) while iphone does not have the capacity to set up the bluetooth property like BB?

Sorry. You're not making sense. Please re-phrase the question or post in your native language.

How to set clock skew property at client side when invoking web services

Hello,
now we're using weblogic 11g, we want to set the clock skew properties.
in server side, we "Create a Web Service security" to set the "Clock Skew" property, change it value from 60000 to 120000, then we invoke the web service from stand-alone client on another machine, the clock skew between the server machine an client machine is 80000. but it still throw exception:
javax.xml.ws.soap.SOAPFaultException: Message Created time past the current time even accounting for set clock skew+
at weblogic.wsee.jaxws.framework.jaxrpc.TubeFactory$JAXRPCTube.processResponse(TubeFactory.java:241)+
we think we still need set the clock skew at client side. in webloigc8.1 doc(http://download.oracle.com/docs/cd/E13222_01/wls/docs81/webserv/client.html), we find there's properties such as "weblogic.webservice.security.clock.precision" we can set in client side, but in weblogic 10.3 doc, we can't find these properties.
now how to set the clock skew at stand-alone client in weblogic 11g?
Thanks!
Fred

Hello,
now we're using weblogic 11g, we want to set the clock skew properties.
in server side, we "Create a Web Service security" to set the "Clock Skew" property, change it value from 60000 to 120000, then we invoke the web service from stand-alone client on another machine, the clock skew between the server machine an client machine is 80000. but it still throw exception:
javax.xml.ws.soap.SOAPFaultException: Message Created time past the current time even accounting for set clock skew+
at weblogic.wsee.jaxws.framework.jaxrpc.TubeFactory$JAXRPCTube.processResponse(TubeFactory.java:241)+
we think we still need set the clock skew at client side. in webloigc8.1 doc(http://download.oracle.com/docs/cd/E13222_01/wls/docs81/webserv/client.html), we find there's properties such as "weblogic.webservice.security.clock.precision" we can set in client side, but in weblogic 10.3 doc, we can't find these properties.
now how to set the clock skew at stand-alone client in weblogic 11g?
Thanks!
Fred

How to set cursor property from "snap-to-plot" to free?

dear all,
is there any one know how to set a cursor property from "snap-to-plot" to "free"?
this cursor is in a XY graphy
i couldn't find coresponding property in the XY graph property node
thank you
Jack

It looks like there are different property names depending on your labview version.
You need to select the ActCrsr and then use the Cursor.Lockstyle property in LV7.1
You need to select the ActCrsr and then use the Cursor.CursorMode property in LV8.2.

How to set updatable property of view object on runtime

Hello Gurus,
I am new in adf and using jdev 11.1.2.3.
I have two view object which has view link and they are based on entity object. In master view i have a column with the name of status. The target is if the value of status is 'active' then i want to allow add rows in detail view and if it is inactive then wants to disable adding or editing in the detail view.
I don't know how to do this. I don't know how to get the other view object and how to set update able property and where to write code in entity object class or view object class.
Any advice................
Thanks in Advance

There are multiple possible ways to archive this. As the VOs are in a master-detail relationship, you can opt to add a navigation method to the child back to the parent. This method can be accessed via java or groovy to allow the child access to the master row. Once the child has access you can use this to ask the master for it's status and if it's not active disable the edit and update buttons.
If both master and detail are on the same page in the ui, there is an easier way. Drag the status attribute from the master table onto the page as e.g. inputText. This will create a binding for the attribute which changes if you select a row in the master table. As you don't need to inputtext, switch to the source mode of the page and delete it. This will remove the inputtext put keep the binding. Now you can use hte binding in an EL to set the disable property of other components to true like
<af:commandButton text="commandButton 1" id="cb1" disabled="#{bindings.masterstatus.inputValue ne 'active'}"/>
The button will only be active it the binding for masterstatus is active.
Timo

How to set property

I want to set Enable Parallel DML property for all my mappings. I want also to set default operating mode property to 'SET_BASED'.
How to do this in OMB+?
When I want to check some Runtime parameters properties I get error message
OMB+> OMBRETRIEVE MAPPING 'MY_MAP' GET PROPERTIES(DEFAULT_OPERATING_MODE)
OMB02918: Property DEFAULT_OPERATING_MODE of MY_MAP does not exist: MMM1034: Property DEFAULT_OPERATING_MODE does not exist.
Pls help
Best regards
Grzegorz

Grzegorz,
That should work... when I try it on one of my PLSQL maps I get the following results:
OMB+> OMBRETRIEVE MAPPING 'MY_MAP' GET PROPERTIES(DEFAULT_OPERATING_MODE)
SET_BASED_FAIL_OVER_TO_ROW_BASED
OMB+> OMBRETRIEVE MAPPING 'MY_MAP' GET PROPERTIES(ENABLE_PARALLEL_DML)
false
Check out this expert it could be a good help:
http://blogs.oracle.com/warehousebuilder/newsItems/viewFullItem$103
If you're using owb11g you'll need add the ui extension:
http://blogs.oracle.com/warehousebuilder/newsItems/viewFullItem$210

How to set JMenu/JMenuItem.accelerator property in Inspector

Similar Messages

Maybe you are looking for