How to set Maxmimum header length in Web Server. It creates a problem
I have setup Sun webserver ahead of Glassfish Application server.
Now when i send a request having length 17000 as POST request , my application does nt receive the whole request data.
If i make request direct to Application server , app server servs the request properly. but when i send the request to websever which diverts the request to app server only , it creates some manipulation with the data sent in the POSt request.
Can any one please guide me what to do.?
Thanks in advance/
I would first try to take GF's loadbalancer plugin out of the configuration and instead use Web Server 7.0's integrated reverse-proxy functionality to pass the requests to your backend AppServer. This will tell you if the problem is in the lbplugin or in some other component in WS 7.0.
The following briefly describes what you might have to do in order to use the integrated reverse-proxy functionality in WS7 instead of GF's lbplugin.
Delete/comment out the following lines in your magnus.conf file:
Init fn="load-modules" shlib="D:/Sun/WebServer7/plugins/lbplugin/bin/passthrough.dll" funcs="init-passthrough,service-passthrough,name-trans-passthrough" Thread="no"
Init fn="init-passthrough"GF's lbplugin installer has incorrectly added a duplicate entry for j2eeplugin in your magnus.conf. Delete this line too:
Init fn="load-modules" shlib="D:/Sun/WebServer7/lib/j2eeplugin.dll" shlib_flags="(global|now)"Replace the following line in obj.conf
NameTrans fn="name-trans-passthrough" name="lbplugin" config-file="D:/Sun/WebServer7/https-01HW151407.India.TCS.com/config/loadbalancer.xml"with
NameTrans fn="map" from="/" name="reverse-proxy-/" to="http:/"Add the following Objects to the bottom of your obj.conf file:
<Object name="reverse-proxy-/">
Route fn="set-origin-server" server="http://appserver.host.com:8080"
</Object>
<Object ppath="http:*">
Service fn="proxy-retrieve" method="*"
</Object>Replace appserver.host.com and 8080 with the appropriate hostname and port number of your GF installation.
More info on setting up WS7's reverse proxy can be found here:
http://blogs.sun.com/meena/entry/configuring_reverse_proxy_in_sun
http://blogs.sun.com/amit/entry/setting_up_a_reverse_proxy
Similar Messages
-
How to set up a FTP and web server and integrate with DMM 5.2
Hi All ...
I need to set up a external server only for content publishing to reduce the overhead of the DMM server .
can anyone guide me on how to set up the external server and intergrate it with the DMM 5.2
Thankssemuthu,
Notes from the Release Notes:
Compatibility Limitations with Microsoft Internet Information Server (IIS)
DMPs that use firmware release 5.2 are compatible with only one version of Microsoft Internet Information Server.
That supported version is IIS 6.0 for Windows 2003 Enterprise. If you do not have the supported IIS version but
want your DMPs to retrieve assets from a webserver, we recommend that you use Apache instead of IIS.
I would suggest using Apache instead of IIS for the webserver service. IIS can be used as FTP if needed.
There are plenty of Documents on the Web about setting up Apache and FTP for servers.
Using Apache with Microsoft Windows
http://httpd.apache.org/docs/2.0/platform/windows.html
Quick HOWTO : Ch20 : The Apache Web Server
http://www.linuxhomenetworking.com/wiki/index.php/Quick_HOWTO_:_Ch20_:_The_Apache_Web_Server
Once the Webserver is setup and operational. You simply store your media content on the Webserver
and then have your DMS assets in the media library use an external URL address for its location.
If you want to use external server for other features in the DMM, you can can see how to configure
here:
http://www.cisco.com/en/US/partner/docs/video/digital_media_systems/5_x/5_1/dmm/user/guide/dsm+etv.html#wp1073210
Goto the section right below ACNS & WAAS..
If this answers your question, Please take time to mark this
discussion answered & rate the response.
Thank You!
T. -
How to set the header variables in weblogic
Hi,
We have a following set up in our environment.
We have weblogic and on the top of it we have apex listener deployed which redirects Oracle Apex.
My Issue:
How can we set up the header variables in weblogic once the user is authenticated against weblogic server.
We are struck here, not knowing how to set the header variables in weblogic server. Its fairly straight forward for Oracle Access Manager or others..
Thanks
Ramesh P.maybe you are looking for the routing options
http://docs.oracle.com/cd/E13159_01/osb/docs10gr3/userguide/modelingmessageflow.html#wp1125348 -
How to set min-password length on ASR1002?
How to set min-password length on ASR1002?
Try:
security passwords min-length
I'm not positive if it's supported in your version of IOS-XE but it is in some. -
How to set different header for different Standard report page
How to set different header for different Standard report page
Hi,
A easy answer would be use the 'set report header text.vi' but maybe you are talking about something else ? -
How to set TabbedPane header height?
How to set TabbedPane header height?
So you got help in this posting that shows one way to add a component to the tabbed pane.
[http://forums.sun.com/thread.jspa?threadID=5337065]
But you didn't acknowledge the help you received.
So now you want more help? Well since you didn't reply to that posting I won't reply to this posting. -
How to set up a basic file sharing server for my small architectural business?
I have no idea if I have posted in the correct area as this is my first forum post within the apple support community!
I have been using a 21.5" imac running 10.6.8 for the past 5 years to run my small home based architectural design business. I have been using the internal hard drive & backing up the necessary data to a simple usb external hard drive. I am now looking to firstly purchase a new imac 27" retina and purchase new autocad lt 2015 for mac software. I am looking to have another imac (my old mac) running in conjunction with the new mac. I want both macs to be able to access the same data and am slightly unsure what is the best way to achieve this.....As my old mac is currently only running snow leopard and an old version of autocad for mac 2011 it wont run on any more recent OS. Essentially i believe I have 2 main options with this.... (1) I Accept that I have to purchase 2 no. autocad lt 2015 licences @ a cost of £2300. Or option (2), I only run autocad on the new mac as this will be the primary station and the old mac used for primarily for admin & accounts. I have also recently discovered that it is possible to rent autocad licences for £300p/a which may also be another option (3)!
I previously had a problem where my hard drive failed on my mac & lost all data on the internal hard drive, luckily I had been backing up all data regularly to my external hard drive and now loss occurred! Obviously with any new system I want to ensure that my data is safe!
I currently utilise about 250GB of data for business operations but this will obviously grow with time.
In the future I would like to have the option of potentially being able to access the network data remotely via macbook pro whilst abroad although at this stage this really isnt my primary objective. Although I believe I could achieve this through apple remote desktop.
I suppose I should provide some information with regard to the required speed of the system...I regularly open 50-100 photos at the same time totalling around 250-500MB. I would like the system to be able to handle this fairly easily.
I have been trawling through forums and to be honest they are totally confusing me. I have also spent time on the phone to the apple business team and have also discussed my objectives with a member of the apple team in store.
There have been various options advised to me and I really do not know which is the most appropriate route forward.
1 - Using a mac mini as the file server and linking the 2 mac devices to this and backing up the mac mini to an external hard drive to ensure no loss of data.
2 - Using a time capsule as a file server and linking the 2 mac devices to this and backing up the TC to an external hard drive to ensure no loss of data.
3 - Using the new mac hard drive and linking the 2 macs via thunderbolt (old mac does not have thunderbolt and so I guess I would need another new mac?!) and then backing up the data to a time capsule.
4 - Using a RAID based server and linking the 2 no. macs.
Sorry to ramble but any advice really would be greatly received!Hi sblemings,
Welcome to the community.
I think with your scenario you should ask yourself, how complicated do you want the setup to be and how much time would you have to be able to resolve an issue should one occur with this setup.
All the options that have been advised would work but they come with complexity and therefore time.
1 - Using a mac mini as the file server and linking the 2 mac devices to this and backing up the mac mini to an external hard drive to ensure no loss of data.
2 - Using a time capsule as a file server and linking the 2 mac devices to this and backing up the TC to an external hard drive to ensure no loss of data.
3 - Using the new mac hard drive and linking the 2 macs via thunderbolt (old mac does not have thunderbolt and so I guess I would need another new mac?!) and then backing up the data to a time capsule.
4 - Using a RAID based server and linking the 2 no. macs.
Sorry to ramble but any advice really would be greatly received!
option 1
Would be a way to achieve what you want, it would centralise your files and you would only need to backup your file server (as long as all the files you wanted backed up were on it). This could be achieved either using the client and sharing various folders or using Server which would give you more options than you would possibly need.
option 2
This is exactly like option 1 except that you wouldn't have to administer another mac however you may limit any future growth.
option 3
This option I probably wouldn't pick, you could achieve this with firewire and use a firewire to thunderbolt adapter (saves you having to buy a new iMac)
option 4
This option would, depending on your RAID level, give you disk redundancy but remember you would still need to back this up, as RAID is NOT a backup solution.
I would also ask is there a pressing need to keep the old iMac in service and complicating things by having a server / NAS? Could you not just transfer all your information over to this and continue with the one backup? I would say that doing it this was would be the simplest way of achieving what you want from what I can take from your question.
As for remotely accessing your data, if you have the right hardware the way to achieve this would be to use a VPN and connect back to your data. However a potentially easier way for you ,would be to use a service like logmein or teamviewer to connect back.
Hope this helps, and by all means any questions please ask.
Dan
How to set up a basic file sharing server for my small architectural business? -
Anyone know anything about Apples Mail and British Telecom Yahoo and how to set it up as I am having no end of problems?
Apple - Support - Mail Setup Assistant
-
How to set default Header and Footer properties for PDF
Hi,
Currently we are manually setting the 'PDF and Print Control' properties for each and every dashboard. We understand that print pdf properties are controlled by pdfstyle.fst file under $SAROOTDIR\web\app\res\s_oracle10\b_mozilla_4 but don't have the exact property names to include in header and footer section.
By default, we want to include company logo, the saved name of the report/dashboard tab and created time in the header. And page# in the footer.
Where can we set these and what properties names should be used in order for these to be set for every new request/dashboard that is created.
Thanks and RegardsHi,
I created one request with logo in the header an page in the footer etc. and called StyleSheet. After you can import this formats by each request.
You can do this in compound layout.
Regards,
Stefan -
How to set ApplIndentityData header field in JMS adapter
Hi Guys ,
I have one requirement for update the field in SAP JMS header. I am using transport protocol for IBM Websphere MQ in JMS adapter.
While sending data to IBM Websphere MQ Queue via JMS Adapter, need to set the field called ApplIndentityData with the appropriate value which is populate to a MQHRF2 header of a message.
So, regarding that where will do it? Means JMS receiver adapter or IBM MQ level. If JMS receiver adapter, I think using ASMA, So please guide me how to set this filed value in JMS adapter or share any document you have.
Thanks & regards
Vijaykumar SHi RejaSekar,
I reffered your blog and did the below settings in JMS module and ASMA settings.
1) Changed the mode for u201CJMS-Complaintu201D instead of u201CWebsphere MQ(non JMS)u201D
2) Additional JMS message properties tab created below property name and java type.
LocalName --> String
Partname --> String
3) In module parameter tab added the below module name and key
AF_Modules/DynamicConfigurationBean --> LocalEnterpriseBean --> RFH2HEADER
4) Under parameter Tab
RFH2HEADER --> key.0 --> insert http://sap.com/XI/System/JMS DCJMSMessageProperty0
RFH2HEADER --> key.1 --> insert http://sap.com/XI/System/JMS DCJMSMessageProperty0
RFH2HEADER --> value.0 --> LocalName
RFH2HEADER --> value.1 --> PartnerName
Kindly check the above settings whether this is correct or wrong. If anything wrong please let me know what we need to change JMS receiver adapter.
Actually my requirement is need to set these parameters and set the value to that parameters and pass in to /usr folder of a WebsphereMQ message.
Kindly check and help me out.
Thanks & regards
Vijayakumar S -
How to set the Common Pov in Web Analysis
Dear All,
Can any one tell me how to set the common Pov for two diffrent reports underon data source in the Web analysis.How could it not be 5A?. If you have A for each member and then you select 5 members you are going to get 5A. If you don't want 5A then what do you want the Avg of A across the 5 members?
The tools are working the way they are designed to, your requirement is a little out of the ordinary. Unfortunately, Web Analysis does not have conditional logic.
Try taking my previous suggestion and adding another member in Essbase called "Count", make it dynamic calc and the formula should be ' 1; '
The purpose here is to get a value of one in the count member for each member you are going to select in your filter. So, if you select five members in the filter, Web Analysis will now return 5A and it will return the result of "Count" which will be 5. Create a calculated member that divides the 5A value by the count value 5. That will give you the average A for the 5 members, then you can divide by 12. -
How to access HTTP Header from within Web service?
Hello,
Is there a way to access HTTP header variables like CONTENT_TYPE, CONTENT_LENGTH from within Web Logic web service.
I was able to get the HTTP header variable from within Apache AXIS services by calling context.getProperty(HTTPConstants.MC_HTTP_SERVLETREQUEST
How can i do this from weblogic web service.
I need this to verify the client SSL_CLIENT_DN
In access I can get the header as follows.
HttpServletRequest req = (HttpServletRequest) context
.getProperty(HTTPConstants.MC_HTTP_SERVLETREQUEST);
clientID = req.getHeader("SSL_CLIENT_S_DN_Email");
Thanks
--Arunhi
the following link may helpful to you
http://e-docs.bea.com/wls/docs81/webserv/anttasks.html#1111537
Regards
Prasanna Yalam -
Help on how to Set a page length and width.
Hi guys I'm kind a new to java JDBC and Jasper.
I'm currently creating my senior project, developing a POS system using Java JDBC, MySql and JasperReport.
I'm now on the finally stage of my project polishing stage.
Now here is my problem.
My adviser wanted my to print sale Invoice using and ordinary Printer let say Espon LX 300 which is available on our Cmpter Lab. He want me to print Sale Invoice using continues paper and try to simulate an actual thing. But I don't know on how to set up a custom paper size in Java or trying to select printer from your system or in your network.
here is the sample of the code:
void PrintInvoice(String databaseName,String userName,String password,String reportFile,String Invoice_Reprint)
HashMap hm = new HashMap();
hm.put("REPORT_DATE", saledate_tbox.getText());
hm.put("REPORT_VAT", vat_tbox.getText());
hm.put("REPORT_SUBTOTAL", subtotal_tbox.getText());
hm.put("REPORT_TOTALPAYMENT", total_tbox.getText());
hm.put("REPORT_CASH", cash_tbox.getText());
hm.put("REPORT_CHANGE", change_tbox.getText());
hm.put("REPORT_POS",POS);
hm.put("REPRINT", "REPRINT");
Connection connection = null;
ResultSet resultSet = null;
Statement statement = null;
try{
Class.forName(JDBC_DRIVER);
String query1 = "select invoice.idinvoice as 'Invoice No'" +
",CONCAT(customer.firstname,' ',customer.lastname) as 'Customer'" +
",invoice.date as 'Date-Time'" +
",item.description as 'Description'" +
",sum(invoice_items.quantity) as 'Quantity'" +
",Format(item.regular_price,2) as 'Unit Price'" +
",Concat((invoice_items.discount*100),'%') as 'Whl Disc'" +
",Format(invoice_items.price,2) as 'Price'" +
",employee.username as 'Employee'" +
",Format(invoice.totaltax,2) as 'Vat'" +
",Format(invoice.total,2) as 'Total'" +
",Format(invoice.cash,2) as 'Cash'" +
",Format((invoice.total-invoice.totaltax),2) as 'Subtotal'" +
",Format((invoice.cash-invoice.total),2) as 'Change'" +
" from invoice,item, invoice_items,customer,employee " +
"where invoice.IDINVOICE = invoice_items.IDINVOICE " +
"AND invoice_items.UPC_CODE = item.UPC_CODE " +
"and invoice.idcustomer = customer.customerid " +
"and invoice.idemployee = employee.idemployee " +
"AND invoice.idinvoice = (select idinvoice from invoice " +
"where idemployee = (select idemployee from employee where username = '"+soldby_tbox.getText()+"') " +
"AND idinvoice = '"+Invoice_Reprint+"' ) GROUP BY item.DESCRIPTION";
connection = (Connection) DriverManager.getConnection(databaseName,userName,password);
statement = (Statement) connection.createStatement();
resultSet = statement.executeQuery(query1);
JasperDesign jasperDesign = JRXmlLoader.load(reportFile);
JasperReport jasperReport = JasperCompileManager.compileReport(jasperDesign);
JasperPrint jasperPrint = JasperFillManager.fillReport(jasperReport, hm, new JRResultSetDataSource(resultSet));
JasperExportManager.exportReportToPdfFile(jasperPrint, PDFEXPORT);
JasperViewer.viewReport(jasperPrint);
JasperPrintManager.printReport(jasperPrint, false);
}catch(Exception ex) {
String connectMsg = "Could not create the report " + ex.getMessage() + " " + ex.getLocalizedMessage();
System.out.println(connectMsg);
finally{
try
statement.close();
connection.close();
} // end try
catch ( Exception exception )
exception.printStackTrace();
} // end catch
}My code print the report on the default printer and default printer setting.
I hope someone out there can help me thx alot. by the way I uses Ubuntu as my OS.
The theme of my Senior Project: POS System Using Open Source.
Hey can someone suggest a project tag line or a better theme cause I believe in the ideals of Open Source,
ThxTry to define ENTER this way & try
class cl_abap_char_utilities definition load.
DATA : BEGIN OF enter,
x type c value cl_abap_char_utilities=>cr_lf,
END OF enter.
PS : I am not 100% sure about this.
a® -
How to set the maximum length that a user can enter in Msgstyledtextinput
Hi Everyone,
I'm currently using EBS 11.5.1 and 10.2g DB
Is there a way that I can set the maximum length that a user can input?
I changed the Maximum Length to lower number (from 150 to 100) but I get the following error.
Developer Mode Exception encountered in item SaveLocation
Error: The item SaveLocation has a maximum length (100)
which is not equal to that of the corresponding VO attribute
, SaveLocation length (150).
Action: Make sure they are equal in size. There must be other way to set that value
Thanks,
ElmerYou have to set the maximum length of column to 150 to avoid this error.
You can set the same in Jdev.
Thanks
--Anil -
How to set the header for second page
Hello all,
I'm trying to set different header for first page and page number should starts from second page.
Below is the sample code to set the header for each and every page.
DECLARE
hApplication OLE2.OBJ_TYPE;
hWindow OLE2.OBJ_TYPE;
hPane OLE2.OBJ_TYPE;
hView OLE2.OBJ_TYPE;
hDocuments OLE2.OBJ_TYPE;
hDocument OLE2.OBJ_TYPE;
hSelection OLE2.OBJ_TYPE;
hParagraphFormat OLE2.OBJ_TYPE;
hRange OLE2.OBJ_TYPE;
hFields OLE2.OBJ_TYPE;
hFont OLE2.OBJ_TYPE;
args OLE2.LIST_TYPE;
wdAlignParagraphLeft CONSTANT number(3) := 0;
wdAlignParagraphCenter CONSTANT number(3) := 1;
wdAlignParagraphRight CONSTANT number(3) := 2;
wdSeekCurrentPageHeader CONSTANT number(3) := 9;
wdSeekCurrentPageFooter CONSTANT number(3) := 10;
wdSeekMainDocument CONSTANT number(3) := 0;
wdFieldPage CONSTANT number(3) := 33;
wdFieldNumPages CONSTANT number(3) := 26;
wdPageBreak CONSTANT number(3) := 7;
wdStory CONSTANT number(3) := 6;
myTab CONSTANT varchar2(1) := chr(9);
myBlue CONSTANT number(8) := 16711680; --FF0000
myGreen CONSTANT number(8) := 65280; --00FF00
myRed CONSTANT number(8) := 255; --0000FF
myDkGreen CONSTANT number(8) := 32768; --008000
myBlack CONSTANT number(8) := 0; --000000
myText varchar2(2000);
BEGIN
hApplication:=OLE2.CREATE_OBJ('Word.Application');
OLE2.SET_PROPERTY(hApplication, 'Visible', 1);
hDocuments := OLE2.GET_OBJ_PROPERTY(hApplication, 'Documents');
hDocument := OLE2.INVOKE_OBJ(hDocuments, 'Add');
-------- Create Header and Footer --------
hWindow := OLE2.GET_OBJ_PROPERTY(hApplication, 'ActiveWindow');
hPane := OLE2.GET_OBJ_PROPERTY(hWindow, 'ActivePane' );
hView := OLE2.GET_OBJ_PROPERTY(hPane, 'View' );
---- Header Section ---
OLE2.SET_PROPERTY(hView, 'SeekView', wdSeekCurrentPageHeader);
hSelection := OLE2.GET_OBJ_PROPERTY(hApplication, 'Selection');
hFont := OLE2.GET_OBJ_PROPERTY(hSelection, 'Font');
OLE2.SET_PROPERTY(hFont, 'Name', 'Times New Roman');
OLE2.SET_PROPERTY(hFont, 'Size', 10);
OLE2.SET_PROPERTY(hFont, 'Bold', FALSE);
OLE2.SET_PROPERTY(hFont, 'Color', MyBlue );
hParagraphFormat := OLE2.GET_OBJ_PROPERTY(hSelection, 'ParagraphFormat');
OLE2.SET_PROPERTY(hParagraphFormat, 'Alignment', wdAlignParagraphCenter);
OLE2.RELEASE_OBJ(hParagraphFormat);
args := OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG(args, 'This is a');
OLE2.INVOKE(hSelection, 'TypeText', args);
OLE2.DESTROY_ARGLIST(args);
OLE2.INVOKE(hSelection, 'TypeParagraph');
OLE2.SET_PROPERTY(hFont, 'Size', 16);
OLE2.SET_PROPERTY(hFont, 'Bold', TRUE);
OLE2.SET_PROPERTY(hFont, 'Color', MyDkGreen );
args := OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG(args, 'Test Header');
OLE2.INVOKE(hSelection, 'TypeText', args);
OLE2.DESTROY_ARGLIST(args);
---- Footer Section ----
OLE2.SET_PROPERTY(hView, 'SeekView', wdSeekCurrentPageFooter);
hParagraphFormat := OLE2.GET_OBJ_PROPERTY(hSelection, 'ParagraphFormat');
OLE2.SET_PROPERTY(hParagraphFormat, 'Alignment', wdAlignParagraphCenter);
OLE2.RELEASE_OBJ(hParagraphFormat);
hFields := OLE2.GET_OBJ_PROPERTY(hSelection, 'Fields');
args := OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG(args, 'Page ');
OLE2.INVOKE(hSelection, 'TypeText', args);
OLE2.DESTROY_ARGLIST(args);
hRange := OLE2.GET_OBJ_PROPERTY(hSelection, 'Range');
args := OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG_OBJ(args, hRange);
OLE2.ADD_ARG(args, wdFieldPage);
OLE2.INVOKE(hFields, 'Add', args );
OLE2.DESTROY_ARGLIST(args);
args := OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG(args, ' of ');
OLE2.INVOKE(hSelection, 'TypeText', args);
OLE2.DESTROY_ARGLIST(args);
hRange := OLE2.GET_OBJ_PROPERTY(hSelection, 'Range');
args := OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG_OBJ(args, hRange);
OLE2.ADD_ARG(args, wdFieldNumPages);
OLE2.INVOKE(hFields, 'Add', args );
OLE2.DESTROY_ARGLIST(args);
OLE2.RELEASE_OBJ(hRange);
OLE2.RELEASE_OBJ(hFields);
OLE2.SET_PROPERTY(hView, 'SeekView', wdSeekMainDocument);
OLE2.RELEASE_OBJ(hView);
OLE2.RELEASE_OBJ(hPane);
OLE2.RELEASE_OBJ(hWindow);
-------- Insert Text --------
hFont := OLE2.GET_OBJ_PROPERTY(hSelection, 'Font');
OLE2.SET_PROPERTY(hFont, 'Name', 'Arial');
OLE2.SET_PROPERTY(hFont, 'Size', 12);
OLE2.SET_PROPERTY(hFont, 'Bold', FALSE );
OLE2.SET_PROPERTY(hFont, 'Color', myBlack );
OLE2.INVOKE(hSelection, 'TypeParagraph');
myText := myTab || 'This text is on the ';
args := OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG(args, myText);
OLE2.INVOKE(hSelection, 'TypeText', args);
OLE2.DESTROY_ARGLIST(args);
OLE2.SET_PROPERTY(hFont, 'Bold', TRUE);
OLE2.SET_PROPERTY(hFont, 'Color', myRed);
args := OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG(args, 'first ');
OLE2.INVOKE(hSelection, 'TypeText', args);
OLE2.DESTROY_ARGLIST(args);
OLE2.SET_PROPERTY(hFont, 'Bold', FALSE);
OLE2.SET_PROPERTY(hFont, 'Color', myBlack );
args := OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG(args, 'page.');
OLE2.INVOKE(hSelection, 'TypeText', args);
OLE2.DESTROY_ARGLIST(args);
args := OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG(args, wdPageBreak);
OLE2.INVOKE(hSelection, 'InsertBreak', args);
OLE2.DESTROY_ARGLIST(args);
----page 2
myText := myTab || 'This text is on the ';
args := OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG(args, myText );
OLE2.INVOKE(hSelection, 'TypeText', args);
OLE2.DESTROY_ARGLIST(args);
OLE2.SET_PROPERTY(hFont, 'Bold', TRUE);
OLE2.SET_PROPERTY(hFont, 'Color', myBlue);
args := OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG(args, 'second ');
OLE2.INVOKE(hSelection, 'TypeText', args);
OLE2.DESTROY_ARGLIST(args);
OLE2.SET_PROPERTY(hFont, 'Bold', FALSE);
OLE2.SET_PROPERTY(hFont, 'Color', myBlack );
args := OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG(args, 'page.');
OLE2.INVOKE(hSelection, 'TypeText', args);
OLE2.DESTROY_ARGLIST(args);
---- go to the top of the first page
args := OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG(args, wdStory);
OLE2.INVOKE(hSelection, 'HomeKey', args);
OLE2.DESTROY_ARGLIST(args);
OLE2.RELEASE_OBJ(hFont);
OLE2.RELEASE_OBJ(hSelection);
OLE2.RELEASE_OBJ(hDocument);
OLE2.RELEASE_OBJ(hDocuments);
OLE2.RELEASE_OBJ(hApplication);
END;
Please help me out
Thanks,
BhavanaClick on --
Edit link for Page> Click "Edit Default" link on Banner >
Under the "Banner Links"
provide value something like this:
Label = Help
URL = /pls/portal30/docs/myhelp.html
Icon = U can upload any icon here.
For Application Components = See the Second Last tab on "Edit Component".
Thanx,
Chetan.
Maybe you are looking for
-
My Firefox will not open to the start page
when I start fire fox the tab says "Problem loading this page" and I get this message in the window Unable to connect Firefox can't establish a connection to the server aThe site could be temporarily unavailable or too busy. Try again in a few moment
-
Dear, While take print out for credit note in MR90 below error are appearing ''Document /2 (CoCd ) not output due to missing entry in table RSEG'' Message no. M8307 Regards Aamir
-
Oracle10g OEM Intranet URL Error
I am working in an Intranet at our university. I have installed Oracle10g everything is installed accurately. When I tried to access the URL http://hgpc39.uovs.ac.za:5500/em. The URL never works. I have installed Oracle10g at my home computer it is n
-
Dear All, I am in process of implementing CHARM and i am facing issue in the process flow for maintenance cycle. In normal changes - we create change request and a maintenance cycle (MC) is attached to it. Once we change the status to Dev with releas
-
<blockquote>Locking duplicate thread.<br> Please continue here: [/questions/757271]</blockquote><br> The complete message I get is "License Expired The trial license on your device has expired. After 30 days,your device will stop working. To apply fo