How to set multiple operating units in before report trigger

hi all
can any one help me out in getting clear in how to set multiple operating units in before report trigger in oracle report.
as we set single operating unit (mo_global.set_policy.context('S',81); as 81 is my operating unit).then who to set for multiple operating unit at run time.

Sounds like eBusiness Suite, right? Better ask this in the appropriate forum.

Similar Messages

Single concurrent program for multiple operating units

HI
I am working on XML/BI publisher to generate AR invoice reports.
We have single rdf report using which rtf templates are generated.
There are 10 operating units (10 ORG_ID's) and 10 rtf templates, one for each operating unit. There are 4 different responsibilities for each ORG_ID
Eg: ORG_ID's = 11, 12, 13, 14..........etc
Eg: Responsibility = xx, yy, zz...........etc
I want to register a single concurrent program. When a user submits a request from "XX" responsibility, then the template associated with that org_id should be generated. Whichever responsibility the user is accessing from, that particular template must be shown as output.
How can i register one concurrent program for multiple operating units.
Thanks!
Edited by: 994628 on Mar 18, 2013 4:39 PM
Edited by: 994628 on Mar 18, 2013 4:42 PM

>
There are 10 operating units (10 ORG_ID's) and 10 rtf templates, one for each operating unit. There are 4 different responsibilities for each ORG_ID
Eg: ORG_ID's = 11, 12, 13, 14..........etc
Eg: Responsibility = xx, yy, zz...........etc
I want to register a single concurrent program. When a user submits a request from "XX" responsibility, then the template associated with that org_id should be generated. Whichever responsibility the user is accessing from, that particular template must be shown as output.
>
interesting case for 10 OE set 10 template
what is purpose? for each OE different requirements for layout?
BTW
if each Responsibility associated with one org_id then
- you can get current org_id when you run concurrent program
- create main template (will be #11) with condition like
<?choose:?>
<?when: ORG_ID=11?>
<?import:xdo://FND.XX11_SUB.en.00/?>
<?call:TEMPLATE11?>
<?end when?>
<?when: ORG_ID=12?>
<?import:xdo://FND.XX12_SUB.en.00/?>
<?call:TEMPLATE12?>
<?end when?>
<?otherwise:?>
<?import:xdo://FND.XX21_SUB.en.00/?>
<?call:TEMPLATE21?>
<?end otherwise?>
<?end choose?>so based on org_id will be import of needed subtemplate
- re-register your "10 rtf templates" as subtemplates
another way is substitution of template for concurrent then it running
in before_report trigger set needed template
l_conc_request_id := fnd_global.conc_request_id;
    if ORG_ID = 11 then
      UPDATE fnd_conc_pp_actions t
         SET t.argument2 = 'XX11'
       where t.concurrent_request_id = l_conc_request_id
         and t.action_type = 6;
if ORG_ID = 21 then
      UPDATE fnd_conc_pp_actions t
         SET t.argument2 = 'XX21'
       where t.concurrent_request_id = l_conc_request_id
         and t.action_type = 6;

Use ar_receipt_api_pub create_cash API across multiple oper units

Hi,
I have a requirement to create AR receipts across multiple operating units and I am using the AR_RECEIPT_API_PUB's create_cash() to do that. The APIs work fine and I can create receipt in oper unit A. But when I changed to a different operating unit B and call the API, it terminated with NO_DATA_FOUND error.
If I run my same code with operating unit B and then oper unit A, it created receipts in oper unit B but returned NO_DATA_FOUND in oper unit A. That way I confirmed there is no set-up issues with both oper units.
I tried following 4 different ways to switch to different operating unit but all resulted in NO_DATA_FOUND:
1) mo_global.init('AR');
2) mo_global.init('AR'); fnd_client_info.set_org_context(&org_id>);
3) mo_global.init('AR'); mo_global.set_policy_context('M', &org_id) ;
4) mo_global.init('AR'); mo_global.set_policy_context('S', &org_id) ; (My EBS set-up has multi oper units, but I tried 'S' flag because of lack of ideas)
Please help. Thanks!
Mike.

@MikeLi,
Did you find any solution for this problem? We are facing this problem on R12 while creating AR receipts across multiple operating units. We will be glad if you share the solution. We have tried all possible ways; but did not help. When we look at the mo_glob_org_access_tmp ; we have access to all organizations; but the api returns 'no data found'
Thanks.

How to change the "Operating Unit" in AP invoice?

Dear all:
when I login AP module, Invoice > Entry > invoices, found that "Operating Unit" is not the name what I want. I make sure I am login the right responsibility.How can I modify "Operating Unit" and change it to the right?
My environment is : R12.1.3
Regards
Terry Chen

Go to sysadmin >profile > system
Check the responsibility checkbox; enter the resp. name
Uncheck all others
Enter profile name = MO: Operating Unit
Hit find; enter the appropriate value and save
Also check the security profile's setting , after change the setting, the issue solved.
Thank you Sandeep Gandhi

1099 Reporting for Multiple Operating Units using same Tax Id Number

Everyone!!!!
We have multiple operating units using the same tax id number. We need to use the 1099 standard reports. I see that in the 1099 standard programs, one of the necessary parameters is Tax Entity Id which is again at operating unit level.
As 1099 reports need to be sent at the Tax Id Number not at operating unit level, is there any way to use the starndard program and do this, or will we have to customize it?
We are on 11.5.10.2 if it matters. Let me know if you need more information.

Ok, I Found it. We have to customize it. Taxes are reported at Operating Unit level only.

How to set multiple styles on a single component in flex ?

Hi ,
I would like to know how to set multiple styles on a single component in flex.
Can anyone give me an example as to how to set multiple styles for a single component ?
Thanks ,
Regards,
Ajantha

Hi tuliptaurus,
You can setStyleName property for chnaging the external css dynamically by using the setStyle() method ...
btn.setStyle("styleName","blendButtonSkinOther");
You can change the external css by using the styleaName property with setStyle method..the line in blue..where blendButtonSkinOther is another css class..
blendButtonSkin {
    fontFamily: Arial;
    fontSize: 11;
    color: #F1F1F1;
    textRollOverColor: #F1F1F1;
    textSelectedColor: #F1F1F1;
    horizontal-align:center;
    width:150;
    height:30;
    cornerRadius:5;
    upSkin:ClassReference('assets.skins.BlendButtonSkin');
    downSkin:ClassReference('assets.skins.BlendButtonSkin');
    overSkin:ClassReference('assets.skins.BlendButtonSkin');
    disabledSkin:ClassReference('assets.skins.BlendButtonSkin');
    selected-up-skin: ClassReference('assets.skins.BlendButtonSkin');
    selected-down-skin: ClassReference('assets.skins.BlendButtonSkin');
    selected-over-skin: ClassReference('assets.skins.BlendButtonSkin');
blendButtonSkinOther {
    fontFamily: Arial;
    fontSize: 11;
    color: #F1F1F1;
    textRollOverColor: #F1F1F1;
    textSelectedColor: #F1F1F1;
    horizontal-align:center;
    width:150;
    height:30;
    cornerRadius:5;
    upSkin:ClassReference('assets.skins.BlendButtonSkin');
    downSkin:ClassReference('assets.skins.BlendButtonSkin');
    overSkin:ClassReference('assets.skins.BlendButtonSkin');
    disabledSkin:ClassReference('assets.skins.BlendButtonSkin');
    selected-up-skin: ClassReference('assets.skins.BlendButtonSkin');
    selected-down-skin: ClassReference('assets.skins.BlendButtonSkin');
    selected-over-skin: ClassReference('assets.skins.BlendButtonSkin');
Thanks,
Bhasker Chari

Check Payment Processing Across Multiple Operating Units

Hi There
We are currently implementing Oracle R12 at the company I work for. Our solution implementer has informed us that you cannot process one check (cheque) payment across multiple operating units and that this is an outstanding enhancement with Oracle. Therefore (if we accept) this we will have to process a seperate check per operating unit which will increase our payment processing significantly.
Can anyone out there:
A. Confirm this is indeed an issue
B. Are you aware if Oracle are doing anything about it and
C. Is there any workaround that we could consider to lessen the impact.
Thanks

Hi,
Scenario 1
If you are going to make Single check payment to the same supplier having different sites under various operating units, oracle has provided a workaround, i.e. to make a manual payment in payables module, however it would not generate any payment instruction.
Scenario 2
If you are going to make single check payment to various suppliers in different/same operating units, it is not allowed by Oracle, as there is no logic behind it. You cannot have 1 check generated for different suppliers ...
I am assuming you are referring to Scenario 1, in which case, i would say there is an WORKAROUND suggested by Oracle to make use of MANUAL PAYMENT method, which you could discuss with your Solution Implementer.
Regards,
Ivruksha

How to set multiple ORACLE_HOME and ORACLE_SID, on Windows

How to set multiple ORACLE_HOME and ORACLE_SID, on Windows.
I have 5 oracle instances. Every time if i want to start up the services , I am manually setting the environment variable (ORACLE_HOME and ORACLE_SID) and starting the services one at a time.
Can we set multiple ORACLE_HOME and ORACLE_SID in Start->My computer-> properties-> advance-> Environment variable.
Thanks
Naveen

Hi ,
Can you please give me the link, for the doc you are referring to
Thanks
Naveen

How to set the number of rings before voice mail answers?

How to set the number of rings before voice mail answers?

For me its:
1. Open the phone app and dial *#61# on the Keypad. Press the Call button.
2. Locate this text on the screen: "Setting Interrogation Succeeded, Voice Call Forwarding, When Unanswered, Forwards to +" and record the 11-digit number after the + symbol.
3. Touch the Dismiss button. Now enter this code on the Keypad: *61*+ followed by the 11-digit Forwards to number recorded in step 2, followed by *11 and *ringtime#. Ringtime is the number of seconds you want your iPhone to ring before voicemail picks up. Your finished code should look something like this:
*61*+18555513466*11*30#
In the example above the ring time is set to 30 seconds. Press the Call button.
4. You should receive the message: Setting Activation Succeeded. Press Dismiss and next time you receive a call it will ring for the new amount of time before going to voicemail.

How to create an operating unit

Please can someone direct me on how to create an operating unit and assign it to a ledger. I don't seem to get my way trying to do this. Thankyou.

Navigate to, US Super HRMS Manager > Work Structures > Organization > Description. Create New. Then enter the Operating Unit Name, Location and Address. Now add a new record in Organization Classifications region and choose Operating Unit. It will add Operating Unit in the Organization classifications. Then click on Others and enter Operating Unit information.
KG

How to run multiple sqls in one jasper report

Hello!
Is there any one that can help me in integrating/ viewing my xml file to the web. I have my GUI in jsp format, the jsp makes a call to the bean class and then finally bean class hit my reports java class.The report java class generates the report and shows it in the new window.
The problem is with writing mutiple sql queries and showing the result from multiple sql queires in one report.
I do not know how to write multiple queries for just 1 report. I can give a simple example of my problem also.
My report is as follows:
First Name Middle Name Last name
Sandeep Pathak
Now First and Middle Name come from 1st sql query and Last Name comes from 2nd sql query.
I want to join the result obtained from both the sql queries in one Jasper Report (not as 2 separate sections but as one section).
My problem is how to view my report in the web. furthermore, how to make complex query in jasperassistant, like multiple table in one query, because i�m integrating multiple query in one form or sheets of paper.
Please help me in this.
Thanks
Sandeep
Calance
India

Hi Sheldon,
we never have issues when we combine standard objects, like a cliear with a load inforprovider, or the master data integration you mentioned in your document. However, from the moment we combine a script logic with a standard package (like a move) it does not work .The data package contains the task needed for the script and for the move. the process chain is called up but always comes in error in the first step (BPC modify dynamically ) ... there is also no log when checking the view status ...
I can sent you some screenshots if you like ...
D

How to set default print orientation in oracle reports 6i?

Can anyone please help how to set default print orientation of Oracle Reports 6i? Currently document is printed in Portrait orientation, but I need to print it in Landscape orientation. Is this possible?

It is solved now. Go to Layout Model -> Main Section, Press F4. In the property pallet select the Orientation that is required to be selected when print is taken for that report.

How to set different header for different Standard report page

How to set different header for different Standard report page

Hi,
A easy answer would be use the 'set report header text.vi' but maybe you are talking about something else ?

Before report trigger execution sequence

Hi,
What is the execution sequence of the before report trigger ?
In the report builder help, the definition says "The Before Report trigger fires before the report is executed *but after queries are parsed and data is fetched*."
But the oracle document "Oracle iDS Reports: Build Internet Reports: Volume 2: Student Guide" says
"Before a report executes; *after queries are parsed, but before records are fetched*
I have built a report where, i am populating a table A with some data in the before report trigger. The data model query is a "select * from A ". But the report o/p is blank since the before report trigger was fired after the query was parsed and fetched. My understanding is that the queries should only be parsed but not fetched before the "before report trigger"
Regards,
Suresh

Hi,
this is an important question.
In fact the online help is right: Before its execution the query is parsed and data fetching is strarted.
Thus any plsql operation that may influence the query and the data accessed is too late in the BEFOREREPORT trigger.
THe issue is that there is no error message or warning. THe problem scenario bandwidth is wide: From "no problem at all" to constant or intermittent error scenarios or worst case unrecognized problems like missing records or any strange behavior in the layout.
So very carefull while using BEFOREREPORT trigger
Ciao
Markus

Drill down reports from Before Report Trigger

Hallo,
I am using reports 6.08 and I want to run several subreports from the parameter form of a master report. However when I call srw.run_report() from the Before Report Trigger with batch=no I get the error message ... When I use batch=yes I cannot use destype=srcreen. When I use the same call from a button trigger it works fine.
How can I call a drill down report from the Before Report Trigger?
The master report should not create a report itself; only the drill down report should be visible. How can I exit the master report without raising an exception after running the drill down report?
Thanks a lot - Ulrich

Ulrich,
The only place where it is valid to call a report using srw.run_report() with a destype=Screen (or Preview) is from a button of an already run report (to provide drill down capabilities).
In your situation where you're really only using Reports as a parameter form (in the master case) I would suggest that you look to use a real Oracle Form as the master driver, and run_product calls to generate the required reports.
Hope this helps,
Danny

How to set multiple operating units in before report trigger

Similar Messages

Maybe you are looking for