How to set property classes at runtime.

Well, as the subject line says my question is plain and simple. I don't see any property for this in SET_ITEM_PROPERTY built-in.
Currently a form has 10 subclassed blocks and views. These blocks have almost similar/definite number of items. At a time only one block with its canvas will be shown to the user. Instead of using so many sub-classed objects, I would like to use only one block and canvas. Now I am looking get getting just property classes from the 10 child forms, which I am looking forward to apply to the common block and items. Any other ideas for the same also appreciated.
Thanks,
-- Raam.

alsalamu alykom
I think there is no way to set property classes at runtime.
u must loop through the objects

Similar Messages

  • How to set main class in netbeans?

    i have a class with a main method that i want to set as my main class, but i dont have the source for it. how can i set it as my main class in netbeans?
    thanks!

    ya i can run in from the comand prompt, Excellent.
    and yeah your right it should be easy. It IS easy. You just did it.
    but for the life of me i cant figure it out. What can't you figure out? How to do the same thing in NetBeans?
    i dont know where else to turn.Let me suggest the NetBeans docs. I'm sure they've got something in there to tell users how to run a .class with a main() method.
    Better yet, keep doing things on the command line until you're knowledgable about NetBeans and leave the IDE alone until you know Java. Two mysteries at once is too much.
    %

  • How to inherit property class

    hello experts,
    i am using forms 10g. i created a property class in form a.
    save and compile. now i wanted to inherit that property class in form b.
    for this i subclass it from form a to form b.
    when i close the form a, it showing the message
    frm:18108 error
    source module: formA
    source object my_property (property class)
    as we say we can inherit property classes , please help me how?
    thanks
    yash

    Yash,
    In order for FORM B to find the Property Class in FORM A, FORM A must be in a directory that is part of the FORMS_PATH. It is always a good idea to create a GLOBAL.FMB (or what ever you want to call the form) or an Object Library (.OLB) that contains all of your objects that will be subclassed in other forms. Then put this .FMB or .OLB in a directory that is in your FORMS_PATH. This lets you store all of your subclass source objects in one location.
    Craig...

  • How to set page permission at runtime?

    Hi,
    I created a portal with several pages in a webcenter portal application.
    I have added most of the page in the pagehierarchy and I have set their required security permission.
    However, I forgot to add one page in my page hierarchy so what is happening is that the page is not being displayed.
    I actually wanted to users with anonymous role to be able to view this page.
    Now my question is, is there a way at runtime to set the page security of that page by using any tool such as console or em?
    I dont want to redeploy my application since it is already running
    I am just not sure how to set the page security at runtime.
    Thanks.
    Webcenter 11.1.1.6

    Neliel,
    You can use the Administration pages to do so.
    Go to the administration page, select the resources tab - Structure - Pages
    Highlight your page and select Set Access fromn the action menu.
    See also this section in the documentation.
    Kind regards,
    Rob

  • How to set page title at runtime

    Hi,
    I'm doing a simple Visual web JFS application that has 2 pages.
    Could you tell me how to set the second page title at runtime based on the input in the first page?
    now I always have the 'http://localhost:8080/myApp/faces.Page1.jsp' on the tab when it goes to second page.
    thanks!

    I am not at all familiar with JSF, but if it was JSP, I'd use this.
    [http://www.w3schools.com/TAGS/tag_title.asp]

  • How to set a class path in atuoexec.bat

    hello friends,
    How to set a classpath in autoexec.bat file. pls sent a path setting techniques to me.
    my JDK1.2 in "c dirve" so what can i do
    help me
    davipet

    What is your OS?
    If it is 95 or 98,
    add SET CLASSPATH=C:\Jdk1.2\lib\tools.jar;.; to your autoexec.bat file.

  • How to load a specific set of classes at runtime.

    Howdy!
    I want to load all the classes in a directory that implement a specific Interface, at runtime. Of course i can load all the classes if i know the String name.
    Class t = Class.forName(ruleClass);
         cnst = t.getConstructor( new Class[] { Session.class } );
         try {
             Object obj = cnst.newInstance(new Object[] {            
                                              m_fwkSession });
             IRules rule = (IRules)obj;
                ...................where IRule is an interface.
    How do i get all the files in that directory and find the classes implementing that interfaces ?

    You can either load all the classes and then test if they are assignable from IRule.class (isAssignableFrom())
    (you could use a custom classloader if you wanted these classes to be garbage collected)
    or
    Open the class files and scan them to see if they contain
    "myPackage/IRule"
    (maybe you would have to parse the .class file, but just scanning it might be good enough)

  • How to set property

    I want to set Enable Parallel DML property for all my mappings. I want also to set default operating mode property to 'SET_BASED'.
    How to do this in OMB+?
    When I want to check some Runtime parameters properties I get error message
    OMB+> OMBRETRIEVE MAPPING 'MY_MAP' GET PROPERTIES(DEFAULT_OPERATING_MODE)
    OMB02918: Property DEFAULT_OPERATING_MODE of MY_MAP does not exist: MMM1034: Property DEFAULT_OPERATING_MODE does not exist.
    Pls help
    Best regards
    Grzegorz

    Grzegorz,
    That should work... when I try it on one of my PLSQL maps I get the following results:
    OMB+> OMBRETRIEVE MAPPING 'MY_MAP' GET PROPERTIES(DEFAULT_OPERATING_MODE)
    SET_BASED_FAIL_OVER_TO_ROW_BASED
    OMB+> OMBRETRIEVE MAPPING 'MY_MAP' GET PROPERTIES(ENABLE_PARALLEL_DML)
    false
    Check out this expert it could be a good help:
    http://blogs.oracle.com/warehousebuilder/newsItems/viewFullItem$103
    If you're using owb11g you'll need add the ui extension:
    http://blogs.oracle.com/warehousebuilder/newsItems/viewFullItem$210

  • How to set plug-in Java Runtime parameters on JRE setup command line

    Hi all:
    I need to install JRE and set the Java Runtime Parameters -Xmx
    by command line ..
    I mean I don't want enter Control panel and set this parameter manually in Java Runtime Parameters textBox..
    thanx.
    Best regards
    w.shiha

    Documentation for controlling the installation is sadly lacking in detail. This is the best I have seen for the Windows environment:
    http://java.com/en/download/help/silent_install.xml
    But, there are numerous other PROPERTY variables that are not discussed. Particularly annoying is the addition of yet another JavaUpdate item with the release of 1.5.0_05. If you can get more information, please post a link to it here.

  • How to set DHCP Class ID in OS X 10.2 ???

    Hi everybody,
    At work we have a network that uses a specific DHCP class ID and the DHCP server does not issue IP's and stuff unless the class ID is correctly set on the client. I have been searching all over the net for the procedure to set the DHCP class ID in OS X, I know how to do it in Windows (ipconfig /setclassid) but I cannot find the OS X equivalent.
    Anybody can help?
    Thanks in advance,
    Virgil

    vzane:
    Welcome to Apple Discussions.
    I am not familiar with what you are trying to do. However, here are some links that may have some useful information for you:
    TCP/IP: IP Addresses for Private Networks
    Open Transport 2.0 Technical Information - Part 1
    May I further suggest that you post your question in the Networking and the Web Forum.
    Good luck.
    cornelius

  • How to set property nodes for each of the multiple y-axes?

    In Labview 6i, I have set up multiple y-axes on an xy graph. I want to change certain properties of each of the 2 y-axes independently. I believe I can do this using "property node".
    However, after I have created a property node for the xy graph, I realised that there is only 1 y-axis selectable from the list of properties. How can I set the property of the other y-axis then?
    Thanks for the help!

    I believe there is a property called "active graph"... this allows you to
    select the active graph to apply the property changes to...
    Later...
    meng118230 wrote in message
    news:[email protected]..
    > In Labview 6i, I have set up multiple y-axes on an xy graph. I want to
    > change certain properties of each of the 2 y-axes independently. I
    > believe I can do this using "property node".
    >
    > However, after I have created a property node for the xy graph, I
    > realised that there is only 1 y-axis selectable from the list of
    > properties. How can I set the property of the other y-axis then?
    >
    > Thanks for the help!

  • How to set DHCP class ID?

    Hi,
    I'm trying to connect through Built-in Ethernet to my office's Inter- and intranet, using their DHCP server. But the network is set up so that only when using a certain DHCP Class ID one gets access to the correct router and thus is connected through to the internet.
    For the Windows machines, they use the "ipconfig"-command that has a /setclassid option. This does not seem to work for the darwin "ipconfig". How then do I set the DHCP class ID?
    Barend
    iBook G4   Mac OS X (10.4.4)  

    vzane:
    Welcome to Apple Discussions.
    I am not familiar with what you are trying to do. However, here are some links that may have some useful information for you:
    TCP/IP: IP Addresses for Private Networks
    Open Transport 2.0 Technical Information - Part 1
    May I further suggest that you post your question in the Networking and the Web Forum.
    Good luck.
    cornelius

  • How to set property of Section and SubReport in C#

    Hi Sir,
    I use CR2008 editor to vew an report file.
    There are a lot of properties can be set in  report, such as: Section and SubReport.
    You can refer the screenshot below to know the properties I mention: (RED block)
    http://smem.no-ip.com/pic/section_expert_1.png
    http://smem.no-ip.com/pic/section_expert_2.png
    http://smem.no-ip.com/pic/subreport_format.png
    If I would like to change the properties dynamically in program (C#),  how can I do ?
    I check the member/method of SubreportClientDocument, SubreportController.., but I can't find any way that I can change the properties.
    We need your help.
    Thank you

    Thanks for support.
    I found the location of properties:
    ReportDocument.ReportDefinition.Areas[n].Sections[n].ReportObjects[n].ObjectFormat.EnableCloseAtPageBreak

  • How to set destination filename at runtime

    Hello All ,
    I want to set the destination filename at runtime , so that it will include the run date and time in the generated file name .
    It should be like this , in the distribution xml file :
    <destinations>
    <file id="MyFiles" name="v_report_file_name" format="pdf">
    <include src="report"/>
    </file>
    </destinations>
    and v_report_file_name will be replaced by the runtime file name.
    Any ideas anybody ?
    Regards

    Hi Navneet ,
    Thanks for for your input. I tried following solution provided by you . I got the following error :
    REP-34304: Expected name instead of <.
    REP-0110: Unable to open file 'C:\....\LOCALS~1\Temp\xyz_distribution00202584.xml'.
    REP-34304: Distribution failed to complete, please review the distribution lists
    I tried creating a user parameter with a default initial value and using the same parameter in the distribution file . I also tried creating a formula column in the data model and referring to it in the distribution xml file .
    The distribtion xml file contents are as under :
    <destinations>
    <!-- Generate file for printing -->
    <foreach>
    <file id="MyFiles" name="&<p_param_name>.pdf" instance="this">
    <include src="mainSection"/>
    <include src="trailerSection"/>
    </file>
    </foreach>
    </destinations>
    Did I go wrong anywhere ?
    Regards
    Shripad

  • How to set property for Cluster Environment for JMS Adapter

    Hi All,
    I am moving from DEV to Prod environment which is cluster.
    Can you Please explain me what property I need to Set for Cluster Environment for JMS Adapter, so that I could avoid race condition for Dequeue/enqueue.
    I am using soa suite 10.1..3.4
    Thanks in Advance.
    Edited by: vikky123 on Jul 12, 2010 7:03 AM

    put something like this
    <activationAgents>
          <activationAgent className="oracle.tip.adapter.fw.agent.jca.JCAActivationAgent" partnerLink="PARNERLINKNAME">
            <property name="clusterGroupId">SOMEUNIQUEVALUE</property>
            <property name="portType">PARTNERLINK_PORTTYPE</property>
          </activationAgent>
        </activationAgents>

Maybe you are looking for

  • Adjustment Accounts for GR/IR Clearing

    Hi, I am facing an issue with adjustment for GR/IR Clearing. I have done the config. in OBYP and assigned the relevant G/L accounts to the transaction keys BNG & GNB as under. Recon. a/c : assigned GR/IR clearing account Adjustment a/c: created anoth

  • What exactly is Airport Express and AirTunes?

    Sounds like a system to send music wirelessly to any HiFi... Is that right and how does it work/what do I need? Would an audiophile be satisfied with the quality of sound? i.e. is this something that would be out of place on a high end audio system o

  • Invoking a Remote Method

    The Question is ? Suppose there is a object running on system, Say A. Another Object/Client want to invoke a method of the object in the System A and that method returns some value. Now the problem is if the method invoked returns the values in more

  • -To add column in the Query desinger

    Hello Colleagues I have column 'C' in the Query desinger. Logic to get value for C is C = A + B. As soon as I open the report, getting the value for Column 'C' . Here, my questions are 1. I should have the flexibility to drill the column C down to di

  • Compile EJB files

    I download the tutorial of EJB from Sun and try to compile the source files. After I create a New Application, then I open a terminal and enter "ant converter". I got a error message. My system is Linux. ant converter Error: JAVA_HOME is not defined