How to set up application independent keyboard mappings?

Hi,
the Keyboard preference panel allows the user to define actions based on menus. What it doesn't seem to let me do is map ANYTHING to F13 - F16, or perform any actions which aren't currently available in some menu.
What I would like to do is use the F13 - F16 keys to quickly switch to Mail, iCal, Safari etc, regardless of the application I am currently using. Since these keys are not used for anything at all at the moment, no modifier keys should be required, just like F9-F12 for Exposé & Dashboard.
For example, it would be a great start to be able to run a simple script like "open -a Mail" =whenever= F14 is pressed.
Is there a way to do this?
Thanks in advance,
Steve
1.25GHz 15" PB / Dual 2GHz G5 / 1.25GHz Mac Mini Mac OS X (10.4.6)

Hi, Proto.
You wrote: "What I would like to do is use the F13 - F16 keys to quickly switch to Mail, iCal, Safari etc, regardless of the application I am currently using."You need a third-party application for that. This is not something Mac OS X provides support for natively.
Try the shareware application iKey. You can investigate other solutions by searching MacUpdate or Version Tracker. The user-submitted reviews accompanying the listings are helpful in sorting the wheat from the chaff.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

Similar Messages

How to set an Application Item from PL/SQL

I am attempting to set an Application Item
After login to my app, I want to retrieve a row from my SETTINGS table and populate some Application Items with the settings information so that I can
display some of that settings information on every page.
Just to start, I created one Application Item named F106_YEAR
I then created a Shared Components Application Process which executes on New Session: After Authentication
I created this process as an Anynomous PL/SQL block.
declare
aucyr varchar(4);
begin
select year into auctyr
from settings;
:F106_YEAR := aucyr;
end;
I've tried a couple of other Syntax tricks attempting to reference the Application Item F106_YEAR from within PL/SQL (like V('F106_YEAR') but nothing seems to be working.
I'm sure that I am missing something simple. Can someone tell me how to set an Application Item from PL/SQL?
Thanks in advance.

I'm still doing something wrong because this is not working for me.
I've tried both of the following versions as an Application Process set to run on New Session after Authentication:
declare
auction_year varchar(4);
begin
select year into auction_year
from PBUUC.SETTINGS where rownum < 2;
:F106_AUCTION_YEAR:=auction_year;
end;
and I also tried:
declare
auction_year varchar(4);
begin
select year into auction_year
from PBUUC.SETTINGS where rownum < 2;
APEX_UTIL.SET_SESSION_STATE (p_name, p_value);
end;
F106_YEAR is a global Item (shared components).
The select statement works just fine in SQL*PLUS so I know that it is correct.
If I run the debugger and log into the application, here is the output. Shouldn't I see my Application Process get called if it is set to run on New Session after Validation?
My Application process is named RETRIEVE_AUCTION_SETTINGS
0.01: A C C E P T: Request="P101_PASSWORD"
0.01: Metadata: Fetch application definition and shortcuts
0.01: alter session set nls_language="AMERICAN"
0.01: alter session set nls_territory="AMERICA"
0.01: ...NLS: Set Decimal separator="."
0.01: ...NLS: Set NLS Group separator=","
0.01: ...NLS: Set date format="DD-MON-RR"
0.01: ...Setting session time_zone to -04:00
0.01: NLS: wwv_flow.g_flow_language_derived_from=0: wwv_flow.g_browser_language=en-us
0.01: Fetch session state from database
0.02: ...Check session 695371898690095 owner
0.02: ...Check for session expiration:
0.02: ...Metadata: Fetch Page, Computation, Process, and Branch
0.02: Session: Fetch session header information
0.02: ...Metadata: Fetch page attributes for application 106, page 101
0.03: ...Validate item page affinity.
0.03: ...Validate hidden_protected items.
0.03: ...Check authorization security schemes
0.03: Session State: Save form items and p_arg_values
0.03: ...Session State: Save "P101_USERNAME" - saving same value: "jps"
0.03: Processing point: ON_SUBMIT_BEFORE_COMPUTATION
0.03: Branch point: BEFORE_COMPUTATION
0.03: Computation point: AFTER_SUBMIT
0.03: Tabs: Perform Branching for Tab Requests
0.03: Branch point: BEFORE_VALIDATION
0.03: Perform validations:
0.03: Branch point: BEFORE_PROCESSING
0.03: Processing point: AFTER_SUBMIT
0.03: ...Process "Set Username Cookie": PLSQL (AFTER_SUBMIT) begin owa_util.mime_header('text/html', FALSE); owa_cookie.send( name=>'LOGIN_USERNAME_COOKIE', value=>lower(:P101_USERNAME)); exception when others then null; end;
0.04: ...Process "Login": PLSQL (AFTER_SUBMIT) wwv_flow_custom_auth_std.login( P_UNAME => :P101_USERNAME, P_PASSWORD => :P101_PASSWORD, P_SESSION_ID => v('APP_SESSION'), P_FLOW_PAGE => :APP_ID||':1' );
0.06: ...Process "Clear Page(s) Cache": CLEAR_CACHE_FOR_PAGES (AFTER_SUBMIT) 101
0.06: Nulling cache for application "106" page: 101
0.00:
0.00: S H O W: application="106" page="1" workspace="" request="" session="695371898690095"
0.01: alter session set nls_language="AMERICAN"
0.01: alter session set nls_territory="AMERICA"
0.01: ...NLS: Set Decimal separator="."
0.01: ...NLS: Set NLS Group separator=","
0.01: ...NLS: Set date format="DD-MON-RR"
0.01: ...Setting session time_zone to -04:00
0.01: NLS: wwv_flow.g_flow_language_derived_from=0: wwv_flow.g_browser_language=en-us
0.01: Application 106, Authentication: CUSTOM2, Page Template: 2904114531488186
0.01: ...Session ID 695371898690095 can be used
0.01: ...Application session: 695371898690095, user=JPS
0.01: ...Determine if user "JPS" workspace "1040027630222986" can develop application "106" in workspace "1040027630222986"
0.01: ...Check for session expiration:
0.01: Session: Fetch session header information
0.01: ...Metadata: Fetch page attributes for application 106, page 1
0.01: Fetch session state from database
0.02: Branch point: BEFORE_HEADER
0.02: Fetch application meta data
0.02: Computation point: BEFORE_HEADER
0.02: Processing point: BEFORE_HEADER
0.03: Show page template header
0.03: Computation point: AFTER_HEADER
0.03: Processing point: AFTER_HEADER
0.04: Computation point: BEFORE_BOX_BODY
0.04: Processing point: BEFORE_BOX_BODY
0.04: Region: Auction_Title F106_AUCTION_YEAR

How to set an application item when report column link is clicked?

I am trying to set the short name of a bread crumb entry when I drill into a detail from an interactive report page.
The master report has a column link with target = detail - "page in this application"
I can pass page items through the URL and they are set on the target page.
How can I set an application item before the target page is called?
Is there a way to set a process before the link is followed?

Kenneth,
I'm not totally sure that I understood the question but, it soounds like you want to set the value of some page items on the page that is opened when you click a link on a column in the master window. Is this right?
If so, you can achieve what you want by creating hidden page item(s) on the target page. In the master page, on which every column provides the link, go into Report Attributes, click on the link column and scroll down to the section labeled "Column Link" Within this section, set the link text to the current column value, e.g. #MASTER_REPORT_COLUMN_NAME_HERE#. Set the target to "Page in this Application" and pick the page number for the target window.
Underneath this you will see a section to set set the value for page items. If you click the flashlight, you can search for the hidden page item that you created above. Use the same value to set it as you did the link text, i.e. #MASTER_REPORT_COLUMN_NAME_HERE#. Do this and let APEX take care of passing the values on the URL.
On the child page, just set whatever control you want to dynamically pick up the value from the hidden field. For example, if you hidden field where named P4_CLEARER_NAME. You could set the title attribute to "Contact Information for &P4_CLEARER_NAME."
You need the preceeding "&" and terminating "." around the name of you hidden page item to do this.
-Joe

How to set up Application specific custom ogoff (sign-off) page.

Hi,
I'm using OracleAS 10.1.2.2
Note 333638.1 shows us how do make a custom SSO login page to be application specific. This works.
Now, I want to do a custom SSO logout (sign-out) page. Using the redirect method described does not seem to work. Please note that in our version 10.1.2.2, there is no default logout.jsp page in the /sso/jsp directory. To deploy a custom logout page, I would need to update the WWSS_LS_CONFIGURATION_INFO$ view.
I was able to test a custom SSO logout.jsp page sucessfully. However, when I tried using a redirect_logout.jsp to make it application, it no longer works.
Does anyone know or have any idea on how to deploy an application specific logout page? (i.e. only specific applications uses the custom logout page, otherwise go to the default one).
Thanks.
- Kevin

Well,
There are 5 choices to choose from on the page. In the description of the choices at the bottom of the page there are 7, and the two additional choices talk about having to first have registered the site with SSO. So...I'm interpreting that as meaning that other 2 possible choices would be displayed if the site is registered with SSO. That, plus the fact that the page which describes how to add the site to SSO seems to think that the SSO choices are displayed in the wizard.
So, no, there's no "exact launguage" that says what the reason is for the choices not being displayed. Can you point me to some exact language that tells me how to get those choices displayed?

Change All / Get Info issue. How to set which application opens a file?

Hello,
I would like to be able to set which application opens a specific file, but cannot get the 'Change all' option in the get info to stick, or to have scvope beyond the immediate folder. For example: whenever I download an.xml file and try to open it the application it defaults to is 'Property List editor' - so I have to go into 'get info' and set the application that I want to use to open the file. Let's say - Textmate. That file will then remain set, for the length of that session anyway - but clicking 'Change all' will not mean that the next file downloaded will default to 'Textmate', or that any .xml files outside the folder will open in Textmate. I have to set them all manually, which gets to be a drag.
I once had a little open source app. that I used to set the preferences as to which application opened a specific suffix - which worked with some, some of the time... but after a clean install I lost it - and can't remember what it was called. Anyway, it didn't entirely solve the problem, only lessened it.

[Mac OS X: Double-Clicking a File Opens the Wrong Application|http://support.apple.com/kb/TS2291?viewlocale=en_US]
*Changing the application used to open all files of a certain kind*
1) In a Finder window highlight a file of the kind you want to change the application to open that kind of file.
2) While that file is highlighted, select File > Get Info or press command (apple or propeller icon) + i to get a file information window.
3) In the lower part of the info window there is an "open with" menu with a list of applications.
4) If your application is already in the box then it is the default application for opening that kind of file and you don't need to do anything more. Close the get info window.
5) If the application showing in the menu is not the one with which you wish to open the file then select a new application. If your application does not appear there then select the "other..." and track down the application (usually in the Applications folder at the main level of the computer).
6) If you wish to change all files of this type to open with this application in future, make sure the "change all" button is selected.
7) Close the get info window.
I know that what I posted may have been what you have been doing, but wanted to double check.
I don't know to what application you are referring but application/file type association is done by Launch Services. Potentially this can become corrupted. You can use Onyx (free) utility to rebuild LS, but in doing so you will lose all non-default associations.
As with any problems, I would also make sure you have run disk utility to verify and repair your drive, and repair permissions on your computer, before doing any other actions. It's surprising what that can clear up. You can slo just try starting in Safe mode, then restarting normally and see if that helps.
[Mac OS X: Double-Clicking a File Opens the Wrong Application|http://support.apple.com/kb/TS2291?viewlocale=en_US]
[Mac OS X: Starting up in Safe Mode|http://docs.info.apple.com/article.html?artnum=107393]
[What is Safe Boot, Safe Mode? (Mac OS X)|http://docs.info.apple.com/article.html?artnum=107392]
[Safe Boot takes longer than normal startup|http://docs.info.apple.com/article.html?artnum=107394]

How to set per application settings

This question was posted in response to the following article: http://help.adobe.com/en_US/ColdFusion/10.0/Admin/WSe61e35da8d31851842debae5134d0ab42ed-7f f9.html

The per-App mappings are missing the "/". The "MyMap" should be "/MyMap", in both examples in #2 under "To set the mappings per application".
Originally it was blogged that "/" wouldn't be required. But "/" became required in the final implementation.
Thanks,
-Aaron Neff

How to set Different applications running on the same computer to use different Gateways?

Dear All,
I would like to have different applications running on the same computer to use different Gateways (both gateways are in the same subnet).
Is it possible in Windows7 with / without a third-party utility?
Current scenario & requirements:
I have two internet connections. Both are in the same subnet (192.168.1.0/24) and connected to the same LAN switch
Gateway for the first connection is 192.168.1.1
Gateway for the second connection is 192.168.1.2
I need to set my chrome browser & google talk to use the gateway 192.168.1.1
I need to set my IE & skype to use the gateway 192.168.1.2
Is it possible? Answers are appreciated!!
Regards,
Anees

Hi,
I agree with Bill. Gateway is essentially an IP address for one network to other networks. For example, you have two networks: network A and network B, to make the two networks communicate with each other, you must go through Gateway. That is, as long
as you set Gateway, then you can make the two networks communicate with each other. The ip address for Gateway is the ip of device with routing enabled. One host machine can own multiple gateways.
Andy Altmann
TechNet Community Support

How to set spark application control bar at bottom

Hi,
I am trying to set control bar at bottom of application container in spark, could any please help me with this, i need applicationskin code to set control bar at bottom insted of default at top.

You need to write a custom Application skin.
Attached is an example custom skin that moves the "topGroup" to after the "contentGroup".

How to set the applications private for each user?

I created different users in a single work space. I want the applications of each user to be private so that the applications of one user should not be viewed by others.
Can any one suggest me .....

So, the term "user" was used in the context of "Application Developer".
The idea behind Apex Application Builder is Team working and therefore you have features for team working. You want to go the reverse way for your reasons.
The only way I am aware of is to create separate workspace for each of the developers. This way each developer sees only his / her applications in Application Builder. If the developers use the same db tables/views then you will have to assign the schema that holds the data to each of these Workspaces.
But if you want to ensure that developers do not even see each other's data then they you have to keep the data also separate.
While doing all this just do not forget that some day the applications have to be deployed and end users have to access it !
I am not aware of any other mechanism to isolate developers.
Regards,

How make setting Java Application Webservice can Test?

Hi all,
I want to ask everyone, i have trouble when after record my java application using e tester where is i can't playback until the application end. The problem is caused in our application should be input data and when playback the data i was input can't display when playback.
the message in result summary is "Timed out after last event played"

hi,
there is a possibility of creating executables from java classes: Microsoft Visual J++
However, you'll always need a virtual machine, even the executables created with MSVJ++ require the Microsoft Virtual Machine - either bundled with the exe file or installed on the user's system.
best regards, Michael

How to set shortcuts for external keyboard for MacBook Pro?

I attached a wired external keyboard (Apple aluminum) to my MacBook Pro. Several of the function keys are preprogrammed, and several are open. I want to program one of the open function keys to emulate the F11 key on the internal keyboard, the one that moves all open windows out of the way to show the desktop. The keyboard shortcuts tab in System Preferences only controls the internal keyboard.
Does anyone know a way to do this?

Bump. Searching for a solution to the same problem.

How to set a default application?

Hi there,
Does anyone know how to set one application to be the default (when opening files) over another application?
For example: I have both Acrobat 7 and Acrobat 8 installed on my machine. When I installed Acrobat 8, it automatically made itself the default program for all things related to PDFs. This is annoying as I much prefer to open my PDFs in Acrobat 7.
My work around is to control/click/open with - 7, but sometimes I forget. What I want is to set Acrobat 7 as the default rather than Acrobat 8.
I need both programs, so I don't want to simply un-install 8.
Any ideas?
Cheers.

Thank you Roger!
I had looked in the information window but (for some reason) didn't see the "Open With" option.
Cheers...

How to set up use of relative URLs for a BSP application

Dear all,
I need to access a BSP application through our external portal.
This is failing because generated URLs are absolute URLs (they mention physical server name, not known of course on the internet) where they should be relative URLs (they use external portal URL as prefix).
How to set this up?
I'm logged on http://myportal.com/irj/portal and want to call a BSP application. To build this page, my internet client (Internet Explorer) tries to get elements from the server. Looking at HTTP trace, I can see that my IE is trying to reach the physical server, not known on internet of course, then page loading fails.
Ex absolute URL : http://myservername.domain.com/sap/bw/[...]/image1.gif
This is the behavior I can see at the moment.
Relative URL : http://myportal.com/sap/bw/[...]/image1.gif
This is what I'd like to see.
Many thanks in advance for your help.
François

Any idea ?

HOW TO: Set up your application server to run BC4J

How To set up your application server to run BC4J.
INTRODUCTION
A running BC4J application is actually the combination of:
* Your own application files
* BC4J runtime libraries
In order to successfully run your BC4J application in local mode, the first requirement is
that your application server contains the necessary BC4J libraries.
This How To describes the steps required to ensure that you have a functional
BC4J runtime environment installed on your application server.
Oracle IAS 1.0.2 and Tomcat 3.1 will be used as examples.
THE BC4J RUNTIME LIBRARIES
Whatever application server you deploy to, the following libraries
are required in the following order to be in the classpath.
BC4J Libraries:
xmlparserv2.jar
jdev-rt.zip
jbojdbcpatch.zip
connectionmanager.zip
jbohtml.zip
jboimdomains.zip
ordim817.zip
ordvir817.zip
ordhttp.zip
jbomt.zip
jbodomorcl.zip
jboremote.zip
jndi.jar
jbodatum12.zip
These libraries can be found in <JDEV_HOME>/lib/
INSTALLING THE LIBRARIES ON IAS:
Installing the libraries is simply a matter of copying them to the
application server's filesystem and adding them to the classpath.
IAS's classpath can be modified by editing the file:
<IAS_HOME>\Apache\Jserv\conf\jserv.properties
In this file you'll find the existing pre-installed BC4J libraries which
looks like this:
wrapper.classpath=<IAS_HOME>\Apache\BC4J\lib\ordvir817.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\lib\ordim817.zip
etc.
Note! These BC4J libraries correspond to JDeveloper 3.1.1.
In order to run JDev 3.2 based applications you will have to update these libraries
to JDeveloper 3.2 production.
Steps:
1. Copy (or FTP) the JDev 3.2 BC4J libraries from <JDEV_HOME>\lib to a NEW directory on the
appserver's filesystem called:
<IAS_HOME>\Apache\BC4J\newlib
2. Modify the classpath by editing <IAS_HOME>\Apache\Jserv\conf\jserv.properties.
Example: (modified classpath entries)
# New 3.2 BC4J Runtime libraries
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\xmlparserv2.jar
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\jdev-rt.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\jbojdbcpatch.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\connectionmanager.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\jbohtml.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\jboimdomains.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\ordim817.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\ordvir817.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\ordhttp.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\jbomt.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\jbodomorcl.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\jboremote.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\jndi.jar
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\jbodatum12.zip
Note: Make sure to remove or comment out the existing 3.1.1 BC4J library entries!
To see the changes, you must restart IAS and that's it, your IAS will be updated with
the JDev 3.2 BC4J libraries which allow you to run BC4J Data Tags among other
things!
INSTALLING THE LIBRARIES ON TOMCAT
As before, this process involves both the copying of the libraries
and modifying the classpath.
After copying the BC4J libraries to a path accessible from Tomcat,
you can modify Tomcat's classpath by editing it's startup script:
<TOMCAT_HOME>\bin\tomcat.bat (NT)
<TOMCAT_HOME>\bin\tomcat.sh (Unix)
Here is a portion of a modified tomcat.bat (on NT)
rem Add BC4J libraries
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\xmlparserv2.jar
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\jdev-rt.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\jbojdbcpatch.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\connectionmanager.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\jbohtml.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\jboimdomains.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\or dim817.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\ordvir817.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\ordhttp.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\jbomt.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\jbodomorcl.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\jboremote.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\jndi.jar
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\jbodatum12.zip
rem Add Oracle JDBC library
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\classes12.zip
Note: I also added the Oracle JDBC library since Tomcat does not have it.
It is found at:
<JDEV_HOME>\jdbc\lib\oracle8.1.7\classes12.zip
And That's It!
When Tomcat is restarted using this script, the necessary BC4J libraries
will be in the classpath..
A follow up How To:"How To Deploy a BC4J JSP Application on IAS and Tomcat"
will be posted shortly!

I copied the following files in jserv classpath
bc4jct.jar
bc4jctejb.jar
bc4jdomorcl.jar
bc4jhtml.jar
bc4jimdomains.jar
bc4jmt.jar
bc4jmtejb.jar
bc4juixtags.jar
collections.jar
datatags.jar
jdev-cm.jar
regexp.jar
share.jar
uix2.jar
cabo.war
classes12.jar
nls_charset12.jar
ordim.jar
ordhttp.jar
runtime12.jar
jdev-rt.jar
xmlparserv2.jar
bc4j_jclient_common.jar
webapp.war
I got this list from Jdev 9031 on-line help
I also copied the new DataTags.tld file to /webapp directory
When i run my jsp page i get this error..
java.lang.NoClassDefFoundError: java/util/TimerTask
     at oracle.jbo.http.HttpContainer.findSessionCookie(HttpContainer.java:693)
     at oracle.jbo.html.jsp.datatags.ApplicationModuleTag.doStartTag(ApplicationModuleTag.java:148)
     at jspapp.odrjsp__html._menu._jspService(Compiled Code)
     at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
     at oracle.jsp.app.JspApplication.dispatchRequest(Compiled Code)
     at oracle.jsp.JspServlet.doDispatch(Compiled Code)
     at oracle.jsp.JspServlet.internalService(Compiled Code)
     at oracle.jsp.JspServlet.service(Compiled Code)
     at javax.servlet.http.HttpServlet.service(Compiled Code)
     at oracle.portal.provider.v1.http.JspRenderer.renderBody(JspRenderer.java:116)
     at oracle.portal.provider.v1.RenderManager.render(RenderManager.java:164)
     at oracle.portal.provider.v1.http.ServletProviderResponse.showPortlet(Compiled Code)
     at oracle.portal.provider.v1.http.HttpProvider.dispatchProviderAction(Compiled Code)
     at oracle.portal.provider.v1.http.HttpProvider.service(Compiled Code)
     at javax.servlet.http.HttpServlet.service(Compiled Code)
     at org.apache.jserv.JServConnection.processRequest(Compiled Code)
     at org.apache.jserv.JServConnection.run(Compiled Code)
     at java.lang.Thread.run(Compiled Code)
In the JDK 1.3 APi docs, i found that TimerTask was introduced only in JDK 1.3
Does this mean that BC4J (in jdev 9031) will only work
with JDK 1.3 or later?
Thanks for your time.
Harish

How to set a new DocumentBuilderFactory in my application?

Hello Suners,
I really need some help to set a new DocumentBuilderFactory in my application.
I have a new instance of DocumentBuilderFactory with my settings and i need to set it in the application so that it use it to show some special DOM elements.
DocumentBuilderFactory.newInstance("com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl", null) ;now i just need a clue how to make it recognizable to my application i mean how to make my application obtain a reference to the new DocumentBuilderFactory so it can use the factory to configure and obtain parser instances?.
Edited by: abulseed on Aug 29, 2010 6:59 AM

abulseed wrote:
now i just need a clue how to make it recognizable to my application i mean how to make my application obtain a reference to the new DocumentBuilderFactory so it can use the factory to configure and obtain parser instances?.That code already produces a reference to the new DocumentBuilderFactory (assuming it's correct code). The normal thing to do with the reference would be to assign it to a variable. Then your application could use the variable, which refers to the factory, to do those things which it is supposed to do.

How to set up application independent keyboard mappings?

Similar Messages

Maybe you are looking for