How to set up secondary WLC for all APs at once?

We added a new controller to the group which we want to be as a secondary for all WAPs. How can I set it up so that I don't have to go to each AP individually? Can this be done on the controller or from the WCS?

WCS.
Configure > AP Template > Lightweight AP > Add Template > Make a name > Save
Under AP Parameters Tab, right-hand column, tick the "Controllers" and choose the secondary controller in the drop down menu.
To the left-hand column, scroll down and put a tick in the "Secondary Controller IP Address" and enter the IP address of the Secondary Controller.
Go to the Select AP tab and find the WAP based on the controller name (fastest way to find it) and choose them. Go to the Apply/Schedule tab and click the "Apply" button.
All done.

Similar Messages

Setting CUIC user permissions for all reports at once

Hi all,
We are using CUIC 8.0(4) Standard Edition and trying to set CUIC user permissions, such as Read, Exec and Write, for reports.
If we need to give access to all reports then we should set permissions for each report separately.
Is there any way to set those permissions for all reports at once?
We attempted to set Read, Exec and Write premissions for the Reports, Stock and UCCE folders but no luck.
Thanks.
Nikolay

Hi all,
We are using CUIC 8.0(4) Standard Edition and trying to set CUIC user permissions, such as Read, Exec and Write, for reports.
If we need to give access to all reports then we should set permissions for each report separately.
Is there any way to set those permissions for all reports at once?
We attempted to set Read, Exec and Write premissions for the Reports, Stock and UCCE folders but no luck.
Thanks.
Nikolay

How to set a common page for all users after loging on?

hi all,
Now "My Dashboard" is the default page after logon.
i want to set a default home page for all users. users can see the home page after loging on.
how to change the default dashboard from "My Dashboard" to "Home page" for all users?
thanks,
dan

Hi,
Steps:
Tried to set default dashboard for all the users.
1. Created a session init block
2. Used data source as select '/shared/SH Test/_portal/Test1' from dual
3. Assigned this value to PORTALPATH session variable
4. In Presentation services > Administration > My account > Default dashboard should be set to 'default'. Then only the dashboard specified in init block will be displayed otherwise My account will override the init block.
5. Save the changes made to rpd.
5. Logout and relogin to see if it is working fine. it is working perfectly fine.
For details please refer the GSC replication document. But it is for all the users.
if customer would like to have user/group based home page.
1. They may need to have 2 separate tables.
i. Group_path_tab with 2 columns. Group_id, portal_path
Have group wise portal path for all the groups
ii. User-group map table
Group_id, Group_name, user_id
User should be part of some group.
2. Then in the init block write the sql should be something like this
select A.portal_path from Group_path_tab A, User_group_map B
where B.user_id = :USER
and B.Group_id = A.Group_id
SO based on USER session variable, it will try to identify the group and then the portal_path.
Finally assign this value to PORTALPATH session variable.
ref:
http://total-bi.com/2011/01/obiee-11g-change-default-dashboard/
Thanks!

How to set the default settings for all users in 11.1.1.3

I have couple of questions
1. How can I change the default setting for all the users so that whenever they log in the planning takes them to the Task lists mode. Or is this a one time thing which they need to do individually ?
2. How can I set the defalut setting for all the users so that they can see the same page when they log into Workspace ?

For workspace have a read of - http://docs.oracle.com/cd/E12825_01/epm.111/bpmui_admin/assigning_default_preferences.html
For planning you can't really set it without hacking tables.
Cheers
John
http://john-goodwin.blogspot.com/

How to set mozilla firefox homepage for all users in windows 7?

I want to set same homepage for all users in windows 7.

You can use a mozilla.cfg file in the Firefox program folder to lock prefs or specify new (default) values.
Place a local-settings.js file in the defaults\pref folder where also the channel-prefs.js file is located to specify using mozilla.cfg.
pref("general.config.filename", "mozilla.cfg");
These functions can be used in the mozilla.cfg file:
defaultPref(); // set new default value
pref(); // set pref, but allow changes in current session
lockPref(); // lock pref, disallow changes
See:
*http://kb.mozillazine.org/Locking_preferences
*http://mike.kaply.com/2012/03/16/customizing-firefox-autoconfig-files/

Setting Initial View Folder for All Users at Once and Forever. How???

Is there any way to make the initial view of all users to be a specific folder? What I want to acomplish it to show my public folders expanded and always showing a specific folder. I can do it for myselft but what about a global setting?

I tried the following code and it does not appear to work. Why?
Our goal is to take the destop preferences of a selected user and apply those preferences to all other users. How can that be done? Note: We need to apply those preferences whether they have already set their preferences or not.
 Dim oSourceUser As InfoObject
 Dim oTargetUsers As InfoObjects
 bErrorOccurred = False
 oSourceUser = oInfoStore.NewInfoObjectCollection().InfoStore.Query("SELECT SI_NAME, SI_DATA FROM CI_SYSTEMOBJECTS WHERE SI_PROGID = 'CrystalEnterprise.User' And SI_Name = '" & vstrSourceUserID & "'").Item(1)
 If vstrTargetUserID.Length > 0 Then
 oTargetUsers = oInfoStore.NewInfoObjectCollection().InfoStore.Query("SELECT SI_NAME, SI_DATA FROM CI_SYSTEMOBJECTS WHERE SI_PROGID = 'CrystalEnterprise.User' And SI_Name = '" & vstrTargetUserID & "'")
 Else
 oTargetUsers = oInfoStore.NewInfoObjectCollection().InfoStore.Query("SELECT SI_NAME, SI_DATA FROM CI_SYSTEMOBJECTS WHERE SI_PROGID = 'CrystalEnterprise.User' And SI_Name != '" & vstrSourceUserID & "'")
 End If
 For Each oUser As InfoObject In oTargetUsers
 Try
 oUser.Properties.Add("SI_DATA", oSourceUser.Properties("SI_DATA").Properties)
 Catch ex As Exception
 bErrorOccurred = True
 If ex.Message.Length = 0 Then
 strLastError = "Unknown Error Occurred"
 Else
 strLastError = ex.Message
 End If
 Exit For
 End Try
 Next
 If bErrorOccurred = False Then oInfoStore.Commit(oTargetUsers)

How to set default sort order for all folders/albums/etc

This is driving me nuts, having to change the sort order from manual to file name every time I change projects or folders (and I have a lot of both). Is there a way to set the default to just sort by file name ascending? Or sort by timestamp (that's date + time, not just date)?

Chuckcars wrote:
I am in process of doing some rearrangement to make Projects as the main box (the file drawer) with headings like: iPhone, Assignments, Events, Landscape, People, Travel. Then, a specific folder under the project. Then, an Album under the Folder.
This should be started as a new thread -- do so if you have any questions.
Strongly recommend using Projects as intended (see comments by Frank and DLSCreative in current thread ^1^ and long comment by me in another thread ^2^ ). In your case that would mean Folders with the headings you've selected, the (most likely) Projects, then Albums (and perhaps more Folders).
^1^ http://discussions.apple.com/thread.jspa?threadID=2716711&tstart=0
^2^ http://discussions.apple.com/thread.jspa?threadID=2654297&tstart=0

Want to run compensation process for all employee at once.

Dear All,
I have created Compensation Adjustment which use an user exit to read employee appraisal and create the compensation amount.
its working fine by this transaction code HRCMP0001C - Change .
but i want to run for all employees simultaneously, and here on this transaction, its only one employee can be select at a time for compensation adjustment.
any body hv any idea how to run this compensation process for all employees at once?
thanks in advance

there is one option available in Edit >Spreadsheet. but it giving an error.
Error while generating document
Message no. SOFFICEINTEGRATION141
Diagnosis
An internal error occurred in the SAP Document Container Control.
Procedure
If the error recurs, enter an error message. There are notes related to how to create a log file using the report SAPROFFICEINTEGRATIONTRACE.
any body hv idea how to solve it?...thanks

How do I set view options for all playlists at once?

Hello,
I want to able to set the view options for all my playlists at once (to include BPM, category etc). Currently you can only do this individually for each playlist.
Surely there is an easier way?

Moka.s-Onkel wrote:
Now I have some questions:
1. Is there a way of selecting multiple playlist in iTunes? And if yes, can I then change the view options for all selected playlists? How does this work?
2. Is there any other way to apply view option settings to multiple playlist?
1 - No
2 - Using iTunes, no.
However this script will do what you want .
-> http://dougscripts.com/itunes/scripts/ss.php?sp=assimilateviewoptions

How to set up automatic payment for the purchase order

Hi, All,
I have one question how to set up automatically payment for the Rent Office purchase Order?
There is the requirement from the client. They want to create one kind of purchase order for the Office Rent, then pay the fees in the certain time of every month to the vendor for the rent fees without any invoice. Whatu2019s the normal solution for this kind of purchase order? Is it ERS? Or something else?
Please give me the details and business flow. Also please tell me how to setup in the SAP and T-code.
Thanks in advance

Either you can set up ERS or you can pay directly from the FI side.
Prerequisites
Evaluated receipt settlement must be flagged in the purchase order item.
The vendor must be flagged as being subject to ERS in the vendor master record.
The goods receipt must refer to a purchase order.
Goods-receipt-based Invoice Verification must be defined for the purchase order item.
A tax code must have been maintained in the purchase order item.
The order price of the materials may not be an estimated price.
If you flag a vendor as being subject to ERS, the system sets the ERS indicator as a default in each item when you create a purchase order for the vendor. You can prevent this happening for certain vendors by flagging the info record for the material and the vendor as not being subject to ERS.
In Purchasing, you can delete the default ERS indicator in a purchase order item.
Choose Logistics Invoice Verification ® Automatic Settlement ® Evaluated Receipt Settlement (ERS).
The selection screen appears.
You can use the following criteria to narrow down selection of the transactions to be settled:
Company code
Plant
Goods receipt posting date
Goods receipt document
Fiscal year of the goods receipt
Vendor
Purchase order and order item
You can define the selection criteria for the invoice documents by:
Delivery
Purchase order
Purchase order item
Goods receipt document
Credit memo
Invoice
Currency
Choose Execute.
The system issues a log for Evaluated Receipt Settlement, which displays the following:
Settled
In line with your selection criteria, the system displays all the order items that were settled (or if you are working in test mode, which would have been settled).
Could not be settled
In line with your selection criteria, the system displays all order items for which ERS is defined but could not be settled. It also lists the reasons.
If the system reports being unable to invoice a transaction, you should exclude the transaction from ERS to avoid it being included in the log the next time ERS is run.
Select the item and choose Exclude from ERS.
The system also generates and possibly sends a message to inform the vendor(s) about the transaction settled, depending on the settings in Customizing.
You can display the following environment information for the order items selected. To do this, choose Goto ®:
Display purchase order
Display invoice
Display material document
Display long text

How to set a date range for date field ?

Dear Experts,
Scenario:
I have a query in validating the date field in my BSP application. My application is for maintain infotype 0023 Other/Previous Employers online by employees in the company.
As per our design we are maintaining the all employment details of the employee both ( with in the current company / previous employment outside the company) in the same infotype.
Every employee will have a hiring date within the SAP HR system. We consider this date as the cutoff date between current and previous employment in our application. When the employee updating the details wia BSP page I need to check the following.
Record inside current company: Validation that, the user should only able to enter BEGIN DATE (BEGDA) greater than or equal HIRING DATE and END DATE(ENDDA) should be greater than FROM DATE (BEGDA).
Record outside current Company: Validation that, the user should only able to enter BEGIN DATE (BEGDA) less than or equal HIRING DATE and END DATE (ENDDA) should be greater than FROM DATE (BEGDA) and less than HIRING DATE.
Technical Requirement:
How to set a date range for date field, i.e. how we can limit the date range in a HTMLB date field? Can this it be achieved via standard functionality of HTMLB?
Following is the code to describe date field in my application.
 <htmlb:inputField id= "ENDDA_NEW_IN"
 type= "date"
 doValidate= "TRUE"
 showHelp= "TRUE"
 disabled= "FALSE"
 width= "183"
 style= "cssTextAreadate"
 value= "<%='99991231'%>"/>
Thanks a lot in advance for your assistance and help.
Cibinu2026
Edited by: cibin kuruvilla on Nov 12, 2008 11:13 AM

Hi,
This functionality is known to be very important and is a key part of the next major release of the JRC planned for the first half of 2008.
Regards,
Blair Wheadon
Product Manager, Crystal Reports

How to set the Default values for Info Objects in Data Selection of InfoPac

Hi All,
Flat file Extracion:
How to set the Default values for Info Objects in Data Selection Tab for Info Package
ex: Fiscal Year Variant Info Object having values 'K4' 'Y2' etc in Flat file
Initially default value(not constant) for this info Object value should be 'K4' in Info Package
If I set data selection value for this info object K4 it will retreive records with this selection only? how to handle
Rgds,
CV

Hi,
suppose as your ex. if you are having fiscalyear variant in the dataselection tab then specify K4 in the from column, again the ficalyearvariant row and click on insert duplicate row at the bottom . you will get another row . In that enter Y2 in the from column. now you can extract K4, y2 values .
haritha

How to make saved IR available for all users

Hi,
I've created IR and saved it to several tabs based on search conditions.
But they're only visible for developers.
How to make these tabs available for all end-users ?
Does version 4.0 support this option ?
Thank you!

Hi
At present this feature is not included, although I believe it may be in 4.0. Many people have provided workarounds for this. None of which I have tried. I cannot find the original thread but here is a solution from a chap called Ruud
>
One way to share your saved reports with others is to 'Publish' your report settings to a few intermediate tables in your application and have other users 'Import' your settings from there. The reason for using intermediate tables is so that not all your saved reports need to be 'visible' to other users (only those that you've chosen to publish).
Basically you have available the following views and package calls that any APEX user can access:-
- flows_030100.apex_application_pages (all application pages)
- flows_030100.apex_application_page_ir_rpt (all saved reports - inclusing defaults and all user saved reports)
- flows_030100.apex_application_page_ir_cond (the associated conditions/filters for above saved reports)
- wwv_flow_api.create_worksheet_rpt (package procedure that creates a new saved report)
- wwv_flow_api.create_worksheet_condition (package procedure that creates a condition/filter for above saved report)
The way I've done it is that I've created 2 tables in my application schema that are straightforward clones of the 2 above views.
CREATE TABLE user_report_settings AS SELECT * FROM flows_030100.apex_application_page_ir_rpt;
CREATE TABLE user_report_conditions AS SELECT * FROM flows_030100.apex_application_page_ir_cond;
( NB. I deleted any contents that may have come across to make sure we start with a clean slate. )
These two tables will act as my 'repository'.
To simplify matters I've also created 2 views that look at the same APEX views.
CREATE OR REPLACE VIEW v_report_settings AS
SELECT r.*
p.page_name
FROM flows_030100.apex_application_page_ir_rpt r,
flows_030100.apex_application_pages p
WHERE UPPER ( r.application_name ) = <Your App Name>
AND r.application_user 'APXWS_DEFAULT'
AND r.session_id IS NULL
AND p.application_id = r.application_id
AND p.page_id = r.page_id;
CREATE OR REPLACE VIEW v_report_conditions AS
SELECT r.*
p.page_name
FROM flows_030100.apex_application_page_ir_cond r,
flows_030100.apex_application_pages p
WHERE UPPER ( r.application_name ) = <Your App Name>
AND r.application_user 'APXWS_DEFAULT'
AND p.application_id = r.application_id
AND p.page_id = r.page_id;
I then built 2 screens:-
1) Publish Report Settings
This shows 2 report regions:-
- Region 1 - Shows a list of all your saved reports from V_REPORT_SETTINGS (filtered to only show yours)
SELECT apex_item.checkbox ( 1, report_id ) " ",
page_name,
report_name
FROM v_report_settings
WHERE application_user = :APP_USER
AND ( page_id = :P27_REPORT OR :P27_REPORT = 0 )
ORDER BY page_name,
report_name
Each row has a checkbox to select the required settings to publish.
The region has a button called PUBLISH (with associated process) that when pressed will copy the settings from
V_REPORT_SETTINGS (and V_REPORT_CONDITIONS) into USER_REPORT_SETTINGS (and USER_REPORT_CONDITIONS).
- Region 2 - Shows a list of already published reports in table USER_REPORT_SETTINGS (again filtered for your user)
SELECT apex_item.checkbox ( 10, s.report_id ) " ",
m.label,
s.report_name
FROM user_report_settings s,
menu m
WHERE m.page_no = s.page_id
AND s.application_user = :APP_USER
AND ( s.page_id = :P27_REPORT OR :P27_REPORT = 0 )
ORDER BY m.label,
s.report_name
Each row has a checkbox to select a setting that you would like to delete from the repository.
The region has a button called DELETE (with associated process) that when pressed will remove the selected
rows from USER_REPORT_SETTINGS (and USER_REPORT_CONDITIONS).
NB: P27_REPORT is a "Select List With Submit" to filter the required report page first.
Table MENU is my application menu table where I store my menu/pages info.
2) Import Report Settings
This again shows 2 report regions:-
- Region 1 - Shows a list of all published reports in table USER_REPORT_SETTINGS (filtered to show only other users saved reports)
SELECT apex_item.checkbox ( 1, s.report_id ) " ",
m.label,
s.report_name,
s.application_user
FROM user_report_settings s,
menu m
WHERE m.page_no = s.page_id
AND s.application_user :APP_USER
AND ( s.page_id = :P28_REPORT OR :P28_REPORT = 0 )
ORDER BY m.label,
s.report_name,
s.application_user
Each row has a checkbox to select the setting(s) that you would like to import from the repository.
The region has one button called IMPORT that when pressed will import the selected settings.
It does this by using the 2 above mentioned package procedure to create a new saved report for you
with the information form the repository. Be careful to match the right column with the right procedure
parameter and to 'reverse' any DECODEs that the view has.
- Region 2 - Shows a list of all your saved reports from V_REPORT_SETTINGS (filtered to only show yours)
SELECT page_name,
report_name
FROM v_report_settings
WHERE application_user = :APP_USER
AND ( page_id = :P28_REPORT OR :P28_REPORT = 0 )
ORDER BY page_name,
report_name
This is only needed to give you some feedback as to whether the import succeeded.
A few proviso's:-
a) I'm sure there's a better way to do all this but this works for me :-)
b) This does not work for Computations! I have not found an API call to create computations.
They will simply not come across into the repository.
c) If you import the same settings twice I've made it so that the name is suffixed with (2), (3) etc.
I did not find a way to update existing report settings. You can only create new ones.
d) Make sure you refer to your saved reports by name, not ID, when matching APEX stored reports and the
reports in your repository as the ID numbers may change if you re-import an application or if you
auto-generate your screens/reports (as I do).
Ruud
>
To me this is a bit too much of a hack and I personally wouldn't implement it - it's just an example to show it can be done.
Also if you look here in the help in APEX Home > Adding Application Components > Creating Reports > Editing Interactive Reports
...and go to the last paragraph, you can embed predicates in the URL.
Cheers
Ben
http://www.munkyben.wordpress.com
Don't forget to mark replies helpful or correct ;)
Edited by: Munky on Jul 30, 2009 8:03 AM

How to make warehouse field inactive for all users in all documents autom.

Hi All,
Can anyone pls tell me "**how to make warehouse field inactive for all users in all documents without having to do it through form setting** "for each and every user. It should be visible but inactive
Thanks & Regards,
Mukesh Agrawal

Hi,
As a work around create a warehouse SelectWH and map the mandatory acoounts as a On hold account(in chart of accounts).So there will not be any posting on this account.
And set this warehouse as default warehouse for all users.
So without selecting the appropriate warehouse the user can not add the document.
I think this might resolve you issue.

Sun ONE Studio 4 aka Forte: How to set the output path for classes ?

Help !
Beginner's question:
Sun ONE Studio 4 aka Forte:
How to set the output path for classes ?
As default, the class files are created in the same directory as the
sources.
In opposite, both JBuilder and Together support that there is a tree
with the sources and another tree with the classes.
The first answer I got was "not possible with Forte, but just if you write your own "ANT Build script" !
a) Please point me to a ready-to-use ANT script for this purpose, if such is available
b) Is using ANT instead of the MAKE as comfortable ? Besides the separation of sourcecode and classes, I would like to keep everything else to be the same, i.e. I don�t want to edit the ANT file if I enlarge the project by directories or files.
Tia
Sincerely
Rolf

You can set S1S's options to place newly created .class files in a specific location.
Identify the compiler that is being used - Open the S1S's Tools/Options window, expand Editing and select Java Sources. Note the Default Compiler value. (If it's one if the Ant options, you use Ant to specify this option, not S1S.)
Open the S1S's Tools/Options window, expand Building/Compiler Types and select the appropriate compiler.
The Properties tab of the compiler has the property Target, which sets the filesystem where the compiler output is directed. If you choose <not set>, the .class files are written to their source directory.
When you set the Target, your change affects all classes that use this compiler.
Very few options can't be set in S1S; the challenge is finding out where they're set!

How to set up secondary WLC for all APs at once?

Similar Messages

Maybe you are looking for