Setting Initial View Folder for All Users at Once and Forever. How???

<p>Is there any way to make the initial view of all users to be a specific folder? What I want to acomplish it to show my public folders expanded and always showing a specific folder. I can do it for myselft but what about a global setting?</p>

I tried the following code and it does not appear to work.  Why?
Our goal is to take the destop preferences of a selected user and apply those preferences to all other users.  How can that be done?  Note:  We need to apply those preferences whether they have already set their preferences or not.
     Dim oSourceUser As InfoObject
            Dim oTargetUsers As InfoObjects
            bErrorOccurred = False
            oSourceUser = oInfoStore.NewInfoObjectCollection().InfoStore.Query("SELECT SI_NAME, SI_DATA FROM CI_SYSTEMOBJECTS WHERE SI_PROGID = 'CrystalEnterprise.User' And SI_Name = '" & vstrSourceUserID & "'").Item(1)
            If vstrTargetUserID.Length > 0 Then
                oTargetUsers = oInfoStore.NewInfoObjectCollection().InfoStore.Query("SELECT SI_NAME, SI_DATA FROM CI_SYSTEMOBJECTS WHERE SI_PROGID = 'CrystalEnterprise.User' And SI_Name = '" & vstrTargetUserID & "'")
            Else
                oTargetUsers = oInfoStore.NewInfoObjectCollection().InfoStore.Query("SELECT SI_NAME, SI_DATA FROM CI_SYSTEMOBJECTS WHERE SI_PROGID = 'CrystalEnterprise.User' And SI_Name != '" & vstrSourceUserID & "'")
            End If
            For Each oUser As InfoObject In oTargetUsers
                Try
                    oUser.Properties.Add("SI_DATA", oSourceUser.Properties("SI_DATA").Properties)
                Catch ex As Exception
                    bErrorOccurred = True
                    If ex.Message.Length = 0 Then
                        strLastError = "Unknown Error Occurred"
                    Else
                        strLastError = ex.Message
                    End If
                    Exit For
                End Try
            Next
            If bErrorOccurred = False Then oInfoStore.Commit(oTargetUsers)

Similar Messages

  • Set a default layout for all users via DIAPI

    Hello everyone,
    I am attempting to set a default report for all users/business partners using the DI-API. 
    I can accomplish this in the B1 application via Tools> Layout Designer...>Set as Default
    If there are entries in the RDFL table for this layout, I am prompted to delete these entries and set this layout as the default for all users/BP's
    Based on the SDK Documentation, the following code should accomplish the same thing via the DI-API
    (stripped down for clarity)
    Dim oDefaultReportParams As DefaultReportParams
    oDefaultReportParams = oLayoutService.GetDataInterface(ReportLayoutsServiceDataInterfaces.rlsdiDefaultReportParams)
    oDefaultReportParams.LayoutCode = sMyLayoutCode
    oDefaultReportParams.ReportCode = sMyReportCode
    Me.oLayoutService.SetDefaultReport(oDefaultReportParams)
    Code executes fine, but it doesn't have the expected impact on settings.  The above code adds an entry to the RDFL table rather than changing the DfltReport field in the RTYP table like I expected, so instead of setting the default report globally for all bps/users, its adding an entry to the RDFL table to set the value for a specific user/bp
    I experimented by including and setting the following properties to every combination I could think of with the same results
            oDefaultReportParams.UserID = 'tried 1, 0, -1
            oDefaultReportParams.CardCode = 'tried "", "0", "-1"
    Am I misunderstanding the API, or using the wrong objects/calls...? If all else fails I could accomplish this via the UI-API instead, but the application was intended to be a stand alone app that didn't rely on SAP B1 application running, so any help or suggestions would be much appreciated.
    Thanks!

    Hi,
    Please repost at SDK forum to get quick response. Close this thread here with helpful answer.
    Thanks.

  • How do I set view options for all playlists at once?

    Hello,
    I want to able to set the view options for all my playlists at once (to include BPM, category etc). Currently you can only do this individually for each playlist.
    Surely there is an easier way?

    Moka.s-Onkel wrote:
    Now I have some questions:
    1. Is there a way of selecting multiple playlist in iTunes? And if yes, can I then change the view options for all selected playlists? How does this work?
    2. Is there any other way to apply view option settings to multiple playlist?
    1 - No
    2 - Using iTunes, no.
    However this script will do what you want .
    -> http://dougscripts.com/itunes/scripts/ss.php?sp=assimilateviewoptions

  • CMDLET commands regarding setting a default font for all users using OWA on an exchange 2010 platform

    HI,
    We are running Exchange 2010 and are migrating users from 2003 to 2010 with no problems.  The client has asked me to set OWA font to LuidaSans which I can do for individuals with no problems.  However, when I try and run the following command
    Get-Mailbox -Resultsize Unlimited | Set-MailboxMessageConfiguration -LucidaSans but then got a message to state
    "property composefontname can't be set on this object becuase it requires the object to have version 0.1 <8.0.535.0> or later.  The object's currant version is 0.0 <6.5.6500.0>"
    What object is this reffered to?  Can anyone help please?
    Thanks
    Paul

    Hi,
    To set a default font for all users, you can use this command: -
    Get-Mailbox | Set-MailboxMessageConfiguration -DefaultFontName "Trebuchet"
    You can use any font style in place of “Trebuchet”.
    I hope this information will be helpful for you.
    Thanks and regards
    Ashish@S 
    Ashish@V

  • How to set mozilla firefox homepage for all users in windows 7?

    I want to set same homepage for all users in windows 7.

    You can use a mozilla.cfg file in the Firefox program folder to lock prefs or specify new (default) values.
    Place a local-settings.js file in the defaults\pref folder where also the channel-prefs.js file is located to specify using mozilla.cfg.
    pref("general.config.filename", "mozilla.cfg");
    These functions can be used in the mozilla.cfg file:
    defaultPref(); // set new default value
    pref(); // set pref, but allow changes in current session
    lockPref(); // lock pref, disallow changes
    See:
    *http://kb.mozillazine.org/Locking_preferences
    *http://mike.kaply.com/2012/03/16/customizing-firefox-autoconfig-files/

  • Setting default printing presets for all users, esp. guest user

    i want to set black/white, two sided printing as the default for all users (9 macs, 30 users on each).
    i set up and save this preset as admin, and copy the files
    com.apple.print.custompresets.plist
    com.apple.print.custompresets.forprinter.nameofprinter.plist
    from admin home/library/preferences to the other users preferences-folders.
    but logging on to any of the other users, i still dont even get the new preset listed.
    i tried entering cups, but there, only the printer setup is editable.
    especially i would like to set the custom preset as default for the guest account, without being wiped every log off.
    is there any alternative way to do this? i dont want to manually log in to the 300 accounts to change this.

    You can do that for new users via a file user.js in the default template folder for new profiles.
    C:\Program Files\Mozilla Firefox\defaults\profile\
    *http://kb.mozillazine.org/user.js_file

  • Setting automatic update settings for all users

    Hello all,
    I'm trying to roll out Quicktime 7.6 to our corporate desktops with the automatic update feature within Quicktime disabled. In past installs we were able to make the setting change and then copy the quicktime.qtp file to the "C:\Documents and Settings\All Users\Application Data\Apple Computer\quicktime" directory on all the computers and all would be good. However with 7.6 is appears this file is now housed under the individual user's profile. Is there a way to make this a global setting for all users logging in to a pc?
    Thanks in advance!
    KC

    We have a similar problem in a High School, using Windows XP Pro, QT 7.x and Active Directory. While going to a Spanish Exam web page that uses QT, the students get locked into an auto update process. As restricted users, they can neither abort or accept the update, and are unable to complete the exam. We have found that unchecking the preference for auto update as an admin user does not uncheck it for anyone else. Under C:\Documents and Settings, there is no folder for Apple Software except for myself, once I have opened the QT preferences. I assume that Apple has hidden the location of the default preference to force updating, without regard to how that would work in a locked-down environment. It sure creates havoc when 30 students sit down for a timed and graded online exam!! Any answers out there?

  • Saving AVL view settings for all users

    Hi,
    I am working on web dynpro abap application which shows alv results of more reports (you will select report and it will show the alv table result).
    I have to use some standard reports for this, so I copied it to Z report and modify it so this is possible. Problem I have is that is standard report the output have maybe 10 columns, but the table I got from the report has maybe 26. I want to limit shown columns on the ALV with settings of view for alv, but the assignment is only possible for the user.
    Is there any way how to create one view settings and make it initial for all users?
    I know there is a way of modifying the standard view via abap code, but I want to keep the possibility to show all fields if required.
    Thanks for your help very much.
    Martin

    Hi,
    another problem, I was expecting the newly created variant / layout / settings for view  would be tied to the displayed table (which sounds kind of wired as I wrote it down). 
    But since I am displaying different tables in the same UI element and binding the tables and their structures dynamically the created variant applies to all of the tables (or thats how it seems) so the table which have all fields different then the layout shows nothing.
    Do you have any ideas how to get around it?
    My idea would be to store the layout (but i have no idea how it looks at db level) and identification of the report to some customer table and fill attribute of alv table dynamically according to used report. But thats just my idea, I have no idea if it si possible to do it like this.
    Is there some other way how to accomplish this functionality?
    I have also tried to do it on fieldcatalog level of the alv table, but it seems to show first, let's say, 8 fields if there is 8 fields in the fieldcatalog.
    Any help or ideas please??
    Thanks
    Martin
    Edited by: Martin Gabris on May 6, 2011 4:11 PM

  • How to set a common page for all users after loging on?

    hi all,
    Now "My Dashboard" is the default page after logon.
    i want to set a default home page for all users. users can see the home page after loging on.
    how to change the default dashboard from "My Dashboard" to "Home page" for all users?
    thanks,
    dan

    Hi,
    Steps:
    Tried to set default dashboard for all the users.
    1. Created a session init block
    2. Used data source as select '/shared/SH Test/_portal/Test1' from dual
    3. Assigned this value to PORTALPATH session variable
    4. In Presentation services > Administration > My account > Default dashboard should be set to 'default'. Then only the dashboard specified in init block will be displayed otherwise My account will override the init block.
    5. Save the changes made to rpd.
    5. Logout and relogin to see if it is working fine. it is working perfectly fine.
    For details please refer the GSC replication document. But it is for all the users.
    if customer would like to have user/group based home page.
    1. They may need to have 2 separate tables.
    i. Group_path_tab with 2 columns. Group_id, portal_path
    Have group wise portal path for all the groups
    ii. User-group map table
    Group_id, Group_name, user_id
    User should be part of some group.
    2. Then in the init block write the sql should be something like this
    select A.portal_path from Group_path_tab A, User_group_map B
    where B.user_id = :USER
    and B.Group_id = A.Group_id
    SO based on USER session variable, it will try to identify the group and then the portal_path.
    Finally assign this value to PORTALPATH session variable.
    ref:
    http://total-bi.com/2011/01/obiee-11g-change-default-dashboard/
    Thanks!

  • Setting Finder Sidebar Folders for all users on Windows Network.

    Morning All,
    Have 15 iMacs and have joined them to Active Directory using Centrify.
    Looking to customize the Finder Sidebar for all users that log on. We don't want to do this manually for all users. Specifically want to make sure the Home Folder is mapped and documents folder and all the other ones are not showing.
    Is this possible to do at all? We have Centrify Group Policies we can apply on our Windows Network and a Mac Server we can use with Profile Manager if necessary as well.
    Hope you can help,
    Regards,

    Hi All,
    Thought I'd bring this thread to the top again in the hopes someone will be able to help.

  • HELP needed on Remote Management set to allow access for all users

    my mac mini snow leopard server runs in a data center and i use screen sharing to interact with it. i played with the sharing settings remotely yesterday and changed "allow access for" to all users. i was disconnected immediately and i couldn't logon again. i have no luck changing to other users. i don't want to make a special trip to the center to change it back to whatever it used to be. i can still use afp to connect but the screen sharing option is no longer available. what does "allow access for all users" mean anyway?
    thanks!

    As its name implies, allow access for all should allow any valid user account to access the server. I'm not sure why it's no longer working. It almost sounds like the ARDAgent crashed.
    Either way there's a command-line interface to the ARD preferences:
    /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/ki ckstart
    man kickstart discusses the options, including examples of how to enable access for specific users.

  • How do I set a Finder background for all users?

    I want to set a background in Finder for a folder hosted on a server, and I want all users who connect to that folder to see the background (and, necessarily, force them into Icon view for that folder). Is there a way to do this? Server is running 10.5.8, clients are running a mix from 10.6.7 to 10.7.1.

    But I dont know how to set a default website name that appears at the top of EVERY page.  Can you help?
    You cannot set a default name for your webpage.
    Each page is unique.
    But you can make a default page and duplicate it.

  • How can I set default toolbar layout for all users in my system?

    Hi everybody! I am running a local ubuntu server at my office. I can set some defaults preferences (about:config) for all new users in the system by defining those prefs in the /etc/firefox/syspref.js.
    Now, I want to define default toolbar layout in a similar way (maybe not needed but fun), to copy the toolbar layout for my user. Is there a general way to do that?
    thank you in advance!

    You can try to create a default template folder (defaults/profile) in the Firefox and place the file(s) in that folder for newly created profile.
    The only way to customize an existing profile is to copy files directly to it.

  • Set ip address same for all users

    I'm having trouble with my internet connection. I would love to know how to diagnose the problem but I fear there is no easy wasy to do that.
    I can connect to my router without a problem, when I bring myiMac out of sleep I can connect to the internet without problem then that connection is lost for a few minutes and then things are ok. How do I diagnose this?
    One option that has been suggested to me is to set my IP address in my network preferences. If I do this, can I apply that change across the four user accounts on my machine or do I need to go into each account and change it there? Would i be worth trying different IP addresses for each user?
    I am wondering if having multiple accounts on my iMac is the source of my problems.

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
    Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple |Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' '/\/etc\/(auto_m|hosts[^.]|peri|sshd?_c)/s/^\.\/[^/]+//p' ' /\/(Contents\/.+\/Contents|Frameworks)\//d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/*/*.{BS,Bas,Es,OSXU,Rem}*.bom' ' {/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' ' -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist ' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` " /e*/{auto_master,{cron,fs}tab,hosts,{launchd,sysctl}.conf,ssh{,d}_c*} {,/usr/local}/etc/periodic/*/* .launchd.conf " list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear;};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;A0;{ A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-  
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    7. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    8. If you see an error message in the Terminal window such as "syntax error," enter
    exec bash
    and press return. Then paste the script again.
    9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Setting a (corporate) Persona for all users

    Hi,
    I've designed a corporate Firefox persona and would like to either
    a) set it as the default persona when a user first opens Firefox
    b) roll it out to all existing users of Firefox where they have not had this persona applied before
    I'm on a Windows Active Directory network and all clients are WinXP/Win7 and have Firefox 3.6 installed.
    Does anyone have an idea of how I can achieve this?

    You can do that for new users via a file user.js in the default template folder for new profiles.
    C:\Program Files\Mozilla Firefox\defaults\profile\
    *http://kb.mozillazine.org/user.js_file

Maybe you are looking for

  • 9500 Communicator lack of support - USA

    I purchased the 9500 Communicator from Dubai back in Nov 2004 while stationed overseas with the US military, when the 9500 first came out. I have been using the phone in the US without any real major issues. Being the clumsy person that I am, I have

  • Problem withDeploy a Webdynpro application with generation of an Excel file

    Considered, the problem that we have is the following one: we are generating a file Excel from a Webdynpro application. At the time of executing it it throws the following error to us: java.lang.NoSuchMethodError: java.lang.StringBuffer.append (Ljava

  • Itunes displaying gibberish for korean font

    Everytime I import Korean songs, the font turns into gibberish, and I have no idea how to fix it. Even when I try to edit the song info and manually type it in, it cannot display Korean. I am quite sure I have the language installed on my computer (i

  • Renamed menu item not changed when site published.

    I changed the name of my site welcome page back to Welcome (it was "Readings"). But when I publish, "Readings" is still the menu name even though I have used ftp to completely deleted all the published files. So somehow iWeb is keeping the old name.

  • Cafe Townsend

    My 12 year old and I are trying to learn how to use dreamweaver. We are doing the cafe Townsend tutorial and are failing to insert the Flash slide show onto the page. We get two of the menus and no pictures. The slide show is thereand can be opened i