How to set up web application integration to use hotmail as my default email

I use hotmail and/or yahoo for my email providers, but when I click on an email link on a website, nothing opens like it did with IE. The website says I can set this up through a "web application integration" but I cannot find instructions on how to do this anywhere. I checked out all the "options" under tools and can't find it. I'm sure it's simple but I can't find it, LOL

http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox

Similar Messages

How to set a variable in portal session using web dynpro java.

Hi,
I have created a web dynpro application, which is running inside portal. I have created a role called "R1". Inside role R1, i have created 3 workset W1, W2 and W3. and inside each workset i have some pages and iviews.
My requirement is when user logins to the portal , and when he clicks on role R1 for the first time, a login page should come (so that we can do revalidation), and when he enters his password again in that login page , then only workset W1, W2 and W3 should be visible/accessible to him and after successful revalidation, if he clicks again on role R1, in that particular portal session, than that login page should not come.
for this, i thought i will set a variable in portal session, whenever user successfully revalidated himself, and if after successful revalidation he clicks again on role R1, i will check in doinit method of webdynpro whether variable is set or not (which i already set on successful revalidation), and if it is set then i will do Donavigation else i will present login page to the user.
Can anyone tells me how to set a variable in portal session using web dynpro java.
thanks
Arush

Hi,
Try this:
WDScopeUtil.put(WDScopeType.CLIENTSESSION_SCOPE, key, value)
WDScopeUtil.get(WDScopeType.CLIENTSESSION_SCOPE, key)
Ex:
WDScopeUtil.put(WDScopeType.CLIENTSESSION_SCOPE,"Key1","Value1");
String value1=WDScopeUtil.get(WDScopeType.CLIENTSESSION_SCOPE,"Key1").toString();
/people/william.cui/blog/2007/02/12/sharing-session-context-between-parent-and-external-windows-running-on-same-host
Regards,
Charan

Web Application Integration in EP 6 SP9

Hello
I'm currently implementing the new version of SAP EP (NW 2004, SP 9) and the web application integration process seems to be diferent from EP 6 SP2. I couldn't find so far any clear and good documentation as the old "HowToUseAppIntegrator.pdf" about how to do this integration. I tryed to follow the same procedure, but the properties (URL Template and User Mapping Template) are different in the com.sap.portal.appintegrator.sap, Generic option.
Is there any similar document for new version ? Any help ?
Thanks in advance, and rgds.
Fernando Cervantes

Hi,
Use the same app integrator document available on SDN.
Upload the par file that comes along with the document using PortalAnywhere.default.
Or else navigate to System Administration --> Support --> Portal Runtime --> Administration Console.
You can upload the par from here.
Follow the example for Yahoo integration.
Regards,
Vibhu

HOW TO: Set up your application server to run BC4J

How To set up your application server to run BC4J.
INTRODUCTION
A running BC4J application is actually the combination of:
* Your own application files
* BC4J runtime libraries
In order to successfully run your BC4J application in local mode, the first requirement is
that your application server contains the necessary BC4J libraries.
This How To describes the steps required to ensure that you have a functional
BC4J runtime environment installed on your application server.
Oracle IAS 1.0.2 and Tomcat 3.1 will be used as examples.
THE BC4J RUNTIME LIBRARIES
Whatever application server you deploy to, the following libraries
are required in the following order to be in the classpath.
BC4J Libraries:
xmlparserv2.jar
jdev-rt.zip
jbojdbcpatch.zip
connectionmanager.zip
jbohtml.zip
jboimdomains.zip
ordim817.zip
ordvir817.zip
ordhttp.zip
jbomt.zip
jbodomorcl.zip
jboremote.zip
jndi.jar
jbodatum12.zip
These libraries can be found in <JDEV_HOME>/lib/
INSTALLING THE LIBRARIES ON IAS:
Installing the libraries is simply a matter of copying them to the
application server's filesystem and adding them to the classpath.
IAS's classpath can be modified by editing the file:
<IAS_HOME>\Apache\Jserv\conf\jserv.properties
In this file you'll find the existing pre-installed BC4J libraries which
looks like this:
wrapper.classpath=<IAS_HOME>\Apache\BC4J\lib\ordvir817.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\lib\ordim817.zip
etc.
Note! These BC4J libraries correspond to JDeveloper 3.1.1.
In order to run JDev 3.2 based applications you will have to update these libraries
to JDeveloper 3.2 production.
Steps:
1. Copy (or FTP) the JDev 3.2 BC4J libraries from <JDEV_HOME>\lib to a NEW directory on the
appserver's filesystem called:
<IAS_HOME>\Apache\BC4J\newlib
2. Modify the classpath by editing <IAS_HOME>\Apache\Jserv\conf\jserv.properties.
Example: (modified classpath entries)
# New 3.2 BC4J Runtime libraries
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\xmlparserv2.jar
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\jdev-rt.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\jbojdbcpatch.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\connectionmanager.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\jbohtml.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\jboimdomains.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\ordim817.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\ordvir817.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\ordhttp.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\jbomt.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\jbodomorcl.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\jboremote.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\jndi.jar
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\jbodatum12.zip
Note: Make sure to remove or comment out the existing 3.1.1 BC4J library entries!
To see the changes, you must restart IAS and that's it, your IAS will be updated with
the JDev 3.2 BC4J libraries which allow you to run BC4J Data Tags among other
things!
INSTALLING THE LIBRARIES ON TOMCAT
As before, this process involves both the copying of the libraries
and modifying the classpath.
After copying the BC4J libraries to a path accessible from Tomcat,
you can modify Tomcat's classpath by editing it's startup script:
<TOMCAT_HOME>\bin\tomcat.bat (NT)
<TOMCAT_HOME>\bin\tomcat.sh (Unix)
Here is a portion of a modified tomcat.bat (on NT)
rem Add BC4J libraries
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\xmlparserv2.jar
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\jdev-rt.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\jbojdbcpatch.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\connectionmanager.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\jbohtml.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\jboimdomains.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\or dim817.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\ordvir817.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\ordhttp.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\jbomt.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\jbodomorcl.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\jboremote.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\jndi.jar
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\jbodatum12.zip
rem Add Oracle JDBC library
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\classes12.zip
Note: I also added the Oracle JDBC library since Tomcat does not have it.
It is found at:
<JDEV_HOME>\jdbc\lib\oracle8.1.7\classes12.zip
And That's It!
When Tomcat is restarted using this script, the necessary BC4J libraries
will be in the classpath..
A follow up How To:"How To Deploy a BC4J JSP Application on IAS and Tomcat"
will be posted shortly!

I copied the following files in jserv classpath
bc4jct.jar
bc4jctejb.jar
bc4jdomorcl.jar
bc4jhtml.jar
bc4jimdomains.jar
bc4jmt.jar
bc4jmtejb.jar
bc4juixtags.jar
collections.jar
datatags.jar
jdev-cm.jar
regexp.jar
share.jar
uix2.jar
cabo.war
classes12.jar
nls_charset12.jar
ordim.jar
ordhttp.jar
runtime12.jar
jdev-rt.jar
xmlparserv2.jar
bc4j_jclient_common.jar
webapp.war
I got this list from Jdev 9031 on-line help
I also copied the new DataTags.tld file to /webapp directory
When i run my jsp page i get this error..
java.lang.NoClassDefFoundError: java/util/TimerTask
     at oracle.jbo.http.HttpContainer.findSessionCookie(HttpContainer.java:693)
     at oracle.jbo.html.jsp.datatags.ApplicationModuleTag.doStartTag(ApplicationModuleTag.java:148)
     at jspapp.odrjsp__html._menu._jspService(Compiled Code)
     at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
     at oracle.jsp.app.JspApplication.dispatchRequest(Compiled Code)
     at oracle.jsp.JspServlet.doDispatch(Compiled Code)
     at oracle.jsp.JspServlet.internalService(Compiled Code)
     at oracle.jsp.JspServlet.service(Compiled Code)
     at javax.servlet.http.HttpServlet.service(Compiled Code)
     at oracle.portal.provider.v1.http.JspRenderer.renderBody(JspRenderer.java:116)
     at oracle.portal.provider.v1.RenderManager.render(RenderManager.java:164)
     at oracle.portal.provider.v1.http.ServletProviderResponse.showPortlet(Compiled Code)
     at oracle.portal.provider.v1.http.HttpProvider.dispatchProviderAction(Compiled Code)
     at oracle.portal.provider.v1.http.HttpProvider.service(Compiled Code)
     at javax.servlet.http.HttpServlet.service(Compiled Code)
     at org.apache.jserv.JServConnection.processRequest(Compiled Code)
     at org.apache.jserv.JServConnection.run(Compiled Code)
     at java.lang.Thread.run(Compiled Code)
In the JDK 1.3 APi docs, i found that TimerTask was introduced only in JDK 1.3
Does this mean that BC4J (in jdev 9031) will only work
with JDK 1.3 or later?
Thanks for your time.
Harish

What is the correct way to set a web application to use HTTP or HTTPS?

In the past I've always created an HTTP web application as the default zone. Then extended the web app, creating a new IIS website on port 443 and enabled SSL. This seems to have worked fine, but I recently read an article stating that it is not good to
extend a web app unless absolutely necessary. So can someone tell me what the proper way is to configure a single web application to work with HTTP and HTTPS?

Extending the web application to support both HTTP and HTTPS is a perfectly good method and in fact is the only way to have a web application support both so what you've done is fine.
If the web application will only use HTTPS, you can set this up when you first create the web application. Specify port 443 and the SSL option (and ensure the URL has an https://) when creating the web application. You'll need to install the certificate
in IIS once the web application has been created.
Jason Warren
Infrastructure Architect
Habanero Consulting Group
habaneroconsulting.com/blog

From a Technical Architect point of view, how to design a web application?

Hi to all,
I am writing this issue here because I this question is not related on how to program, but on how to design a web application. That is, this question is not related to how to program with the technologies in J2EE, but how to use them correctly to achieve a desired outcome.
Basically I know how to develop a simple web application. I like to use SpringFramework with AcegiSecurity and Hibernate Framework to persist my data. I usually use JBoss to deploy my web applications, however I could easily use Tomcat or Jetty (Since I am not using EJB�s).
However I have no idea on how to develop (or a better word would be �design�) a website which is divided into different modules.
Usually when you develop a website, you have certain areas that are public, and other areas that are not. For example, a company would want anyone on the Internet to download information about the products they are selling, however they would only want their employees to download certain restricted information.
Personally I try to categorise this scenario in to common words; Extranet and Intranet.
But � (and here starts the confusion in my mind) should I treat these two as two projects, or as one project? The content to be displayed on the Extranet is much different then the content to be displayed on the Intranet and definitely clients should not be allowed to the Intranet.
First approach would be to treat them as the same project. This would be perfect, since if the company (one day) decides to change the layout of the website, then the design would change for both the Intranet and the Extranet version. Also the system has a common login screen, that is I would only need to have employees to have a certain Role so that they have access to the intranet, while clients would not have a certain Role and thus they would not be allowed in. But what about performance and scalability? What if the Intranet and Extranet have to be deployed on the different Hardware!?
The second approach is to threat them as two separate projects. To keep the same layout you just copy & paste the layout from one project to another. However we would not want to have two different databases to store our users, one for the employees and the other one for the clients. Therefore we would build a CAS server for authentication purposes. Both the Intranet and the Extranet would use the same CAS server to login however they could be deployed on different hardware. However what if we want to change the design. Do we really want to have to just copy and paste elements from one project to another? We all know how these things finish! �We do not have time for that � just change the Extranet and leave the Intranet as it is!�
The third approach (and this is the one I like most) is to have a single project built into different WAR files. The common elements would be placed in all WAR files. However in development you would only need to change once and the effects would show in the different war files. The problem with this approach is that the project will be very big. Also, you will still need to define configuration files for each one of them (2 Web.config, 2 Spring-Servlet.config, 2 acegi-security.config, etc).
Basically I would like something in the middle of approach 2 and approach 3! However I can identify what this approach is. Also I can not understand if there is even a better approach then these three! I always keep in mind that there can always be more then two modules (that is not only Intranet and Extranet).
Anyways, it is already too long this post. Any comments are more then welcome and appreciated.
Thanks & Regards,
Sim085

Hi to all,
First of all thanks for the interest shown and for the replies. I do know what MVC or Multi-layered design is and I develop all my websites in that way.
Basically I have read a lot of books about Domain-Driven Design. I divide my web applications into 4 layers. The first layer is the presentation layer. Then I have the Facade layer and after that I have a Service layer (Sometimes I join these two together if the web application is small enough). Finally I have the Data Access layer where lately I use Hibernate to persist my object in the database.
I do not have problems to understand how layering a web application works and why it is required. My problem is how to design and develop web applications with different concerns that use same resources. Let me give an example:
Imagine a Supermarket. The owner of the Supermarket want to sell products from the website, however he wants to also be able to insert new products from the website itself. This means that we have two different websites that make use of the same resources.
The first website is for the Supermarket clients. The clients can create an account. Then they can view products and order them. From the above description we can see that in our domain model we will have definitely an object Account and an object Product (I am not mentioning all of them). In the Data Access layer we will have repository objects that will be used to persist the Account and Products.
The second website is for the Supermarket employees. The employees still need to have an account. Also there is still a product object. This means that Account and Product objects are common to the two websites.
Also important to mention is the style (CSS). The Supermarket owner would like to have the same style for both websites.
Now I would not like to just copy & paste the objects and elements that are common to both websites into the two different projects since this would mean that I have to always repeat the changes I make in one website, inside the other one.
Having a single WAR file with both websites is not an option either because I would not like to have to deploy both websites on the same server because of performance and scalability issues.
Basically so far I have tought of putting the common elements in a Jar File which would be found on the two different servers. However I am not sure if this is the best approach.
As you can see my problem is not about layering. I know what layering is and agree with both of you on its importance.
My question is: What is the best approach to have the same resources available for different websites? This includes Class Files, CSS Files, JavaScript Files, etc.
Thanks & Regards,
Sim085

How i can make web application by using oracle form6i

how i can make web application by using oracle form 6i , indetail .
A.R

indetail .As Andy Millman might observe, you're having a laugh. This is a big topic, far exceeding what it is reasonable to expect people to help out with in a Forum. Do you not have the 6i documentation?
OTN has a site for upgarding to web forms. Although it is mainly focussed on moving to 9i/10g a lot of the issues and solutions apply to moving a 6i client/server app to web deployment. For further help there is a Forms.
Cheers, APC

How to deploy my web application .war file into SAP netweaver Engine

Hi All,
I want to deploy web application which is developped using JAVA web technology into SAP netweaver Engine.
I tried to deploy .war file through SDM but it complained the following error
"Error loading archive
C;\Document and Settings\cr1adm\Desktop\MyProject.war
(server side name is: F:\usr\sap\JR1\JC01\SDM\program\temp\MyProject.war)
com.sap.sdm.util.sduread.IIIFormattedSduFileException: The information about development component found in the manifest is either missing or incomplete!
Manifest attributes are missing or have badly formatted value:
attribute keylocation missing
attribute keyname is missing
attribute keyvendor is missing
attribute keycounter is missing
(F:\usr\sap\JR1\JC01\SDM\program\temp\MyProject.war)"
Can any one please suggest how to deploy external web application into SAP netweaver engine.
Is there any procedure to follow to do this.
your inputs will be highly appreciated...
Thanks in advance
JM

You may need to convert the .war archive to SDA/SCA file format before deploying it to SAP Netweaver Engine.
Check out the below SAP NOTE if it is usefull.
Note 1223957 - Usage of NetWeaver Packaging Tool.
Apart from SDM you can also deploy the files through telnet...
Note 859444 - How to deploy libraries on J2EE Engine 6.40
1)Connect to telnet as below
Start --> Run
telnet hostname/ip address portno
Ex: telnet xxx.xx.xx.x 5<Instance no>08
2)Login with administrator id:
Use the below command to deploy the files.
deploy <directory path to the SDAs location> version_rule=all on_prerequisite_error=stop on_deploy_error=stop
Example: deploy E:\usr\sap\trans\EPS\in\VCBASE03_0-10006939.SCA version_rule=all on_prerequisite_error=stop on_deploy_error=stop.
Also have a look at this note which talks about the error you are getting.
Note 1171457 - IllFormattedSduManifest/SduFileException during deployment
Hope it helps.
Edited by: Khaiser Khan Mohammed on Nov 7, 2010 12:17 PM

Create web application in powershell using existing app pool

Hi all,
I am trying to create a web application with this script:
https://gallery.technet.microsoft.com/office/Create-SharePoint-2013-1d7c3337
The problem is that I want to use an existing app pool, but when I do I get this error:
Aborting: Application Pool SharePoint - Applications already exists on the server and is not a SharePoint Application Pool
Obviously this is wrong, since I use this app pool for most of my web apps.
So how does one go about creating a web app in powershell with an already existing app pool?
-Michael
mic

try these links:
http://sharepoint.stackexchange.com/questions/81297/creating-a-webapp-via-powershell-is-mapping-the-site-to-wrong-apppool
http://blogs.technet.com/b/fromthefield/archive/2014/03/26/create-a-sharepoint-application-pool-using-powershell.aspx
http://blogs.msdn.com/b/rcormier/archive/2012/09/01/how-to-create-sharepoint-web-applications-with-powershell.aspx
Please mark answer as correct if it is correct else vote for it if you find it useful Happy SharePointing

Launch All Web Applications in browser using PowerShell

Hi Admins,
I am working on a Script where I should be able to launch all the web applications in the browser to open in tabs.
I have worked out with the following script and was able to come upto an extent where I am able to launch the Internet Explorer.But ....only 1 web app opens up and throws an error message :
Exception calling "Navigate" with "1" argument(s): "The interface is unknown. (Exception from HRESULT: 0x800706B5)"
Below is my script
Add-PSSnapin Microsoft.sharepoint.powershell -ErrorAction SilentlyContinue
$webApps = Get-SpWebapplication
foreach($webapp in $WebApps){
$URL = $webapp.URL
$ie = New-Object -ComObject InternetExplorer.Application
$ie.Navigate($URL)
while ($ie.busy -eq $true) {
Start-Sleep -Milliseconds 600
$ie.Visible = $true
Can anyone help me know where I am making the mistake ?
Regards

Hi,
As I understand, you want to lunch all web applications in browser using PowerShell.
I can achieve it by the PowerShell code below:
foreach($webapp in $WebApps){
$ie = New-Object -ComObject InternetExplorer.Application
$URL = $webapp.URL
$ie.Navigate($URL)
$ie.Visible = $true
You can try it and check it if can work.
For the error message, I recommend to run the SharePoint Management Shell as administrator or turn off User Access Control and then check how it works.
Best regards
Sara Fan
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]
The above code will open 3 different browser. OP requested to launch all web application in different tabs. To achieve this we need to use the code below
$webApps = Get-SpWebapplication
$ie = New-Object -ComObject InternetExplorer.Application
$ie.Navigate($webApps[0].URL)
for($i=1; $i -le $WebApps.length-1; $i++)
$ie.Navigate2($WebApps[$i].URL,0x10000)
$ie.Visible = $true
Regards Chen V [MCTS SharePoint 2010]

Uninstall IE and set another web browser such as Chrome and FireFox as default using Group Policy

Hi there,
Please can anyone instruct me on how to uninstall IE and set another web browser such as Chrome and FireFox as default using Group Policy. Your help would be much appreciated.
Kind regards,
RocknRollTim
P.S. I was redirected by a forum user off the Microsoft Community forum.

IE can't be uninstalled. It's part of the operating system and cannot be removed. You can hide the icon but the engine is still on the machine and still must be updated.
This is a topic best suited for a Group policy forum.
https://social.technet.microsoft.com/Forums/en
US/home?forum=winserverGP
Step one is to install the Chrome ADMX templates - see the link below for more detais:
Configuring Google Chrome via Group Policy | Jack Stromberg:
http://jackstromberg.com/2013/08/configuring-google-chrome-via-group-policy/
Of the two browsers, my personal preference is Chrome over Firefox. Firefox's add in model is too prone to developer insecurity.
My blog
Thanks Justin Gu for marking this as the proposed answer.
Thank you,
RocknRollTim

How to set fetchsize of sql Query when using Database Adapter.

Hi All,
I am using DatabaseAdapter to connect to database and retriving huge amount of data.For improvement in the performance I want to set the "fetchsize" of sql query. I know fetchsize can be preset in Java using Jdbc 2.0 API.Please let me know how to set this value in BPEL when using DBAdapter?
Thanks
Chandra

I talked to the developer of the db adapter - and he told me this feature will be available in BPEL PM 10.1.3 (which is supposed to be production later this year, and a public beta soon). If this is an emergency I would recommend going throug Oracle support and have them file an enhancement for 10.1.2.0.2
hth clemens

How to set value for trim and bleed using jsx script?

I have tried using bleedoffsetRect but somehow it is not working. Can anybody please help me on how to set value for trim and bleed using jsx script? Any example will be highly appreciated.
Following is the code I am trying with:
var _saveName = new File ( root_path +_strFileName+".pdf");
    var _saveOpts = new PDFSaveOptions();
    _saveOpts.printerResolution = 300;
    var bleedarray = new Array();
     bleedarray[0] =9.00;
     bleedarray[1]=9.00;
     bleedarray[2]=9.00;
     bleedarray[3]=9.00;
    _saveOpts.bleedOffsetRect = bleedarray;

I would expect although I've not actually tried this for the bleed off set box to be larger than the artbaord and the first two values to be negative or 0…
var bleedarray = new Array(-9,-9,artboard.width+9,artboard.height+9);
Where 'artboard.width' & 'artboard.height' you will have calculated from your file. An Array(9,9,9,9); would not constitute any boxes bounds.

How to set request number of info package using start routine

Hi All,
I have a specific requirement in which I need to upload only selective request nos from PSA to DSO.
Any one can suggest how to set request number of info package using start routine or any other mode so that only selective request should proceed using DTP?
Thanks
Sangita

You'll probably want to do this in a start routine. It is probably not advisable to hard-code the technical name of the InfoPak. They seem to remain the same upon transport, unlike DTP technical names which are locally generated.
I would do a SQL select like this in a start routine, and then filter based on the results of the SQL. You'll probably want to sort the results by date and time, both descending. Or do a MAX in the SQL.
Please let me know if this isn't clear.
select q~rnr q~logdpid q~tdatum q~tuzeit
from rsreqdone as q
inner join rsldpio as p
on p~logdpid = q~logdpid
where p~objvers = 'A'
and p~logdpid like 'ZPAK%'
and p~source = 'your data source'

How to compile your flex application for Iphone Using Adobe Flash CS5?

How to compile your flex application for Iphone Using Adobe Flash CS5?

I'm so sorry, I'm not really familiar with the codes.

How to set up web application integration to use hotmail as my default email

Similar Messages

Maybe you are looking for