How to set request number of info package using start routine

Hi All,
I have a specific requirement in which I need to upload only selective request nos from PSA to DSO.
Any one can suggest how to set request number of info package using start routine or any other mode so that only selective request should proceed using DTP?
Thanks
Sangita

You'll probably want to do this in a start routine. It is probably not advisable to hard-code the technical name of the InfoPak. They seem to remain the same upon transport, unlike DTP technical names which are locally generated.
I would do a SQL select like this in a start routine, and then filter based on the results of the SQL. You'll probably want to sort the results by date and time, both descending. Or do a MAX in the SQL.
Please let me know if this isn't clear.
select q~rnr q~logdpid q~tdatum q~tuzeit
from rsreqdone as q
inner join rsldpio as p
on p~logdpid = q~logdpid
where p~objvers = 'A'
and p~logdpid like 'ZPAK%'
and p~source = 'your data source'

Similar Messages

How to control data load in Info-Package using ABAP?

Hello Gurus:
I am trying to resolve couple of issues.
1. I need to load data DAILY Full Load into a Planning cube. I have the 0NETDUEDATE   for selection in the
     Info-package. I am getting data from anothe base A/R cube. I want to Load Daily ONLY those records
     for which the "0NETDUEDATE" is Greater than "System Date". I think the logic would be IF 0NETDUEDAT
     .GT. SYS-DATUM, bruing the record. What should be the statement in 'Result' for keeping the record?
     (I don't know ABAP, so need help here...!)
2. Similalry, before loading the data above, I want to delete all the existing records from Planning cube where
     0NETDUEDATE is GT System date (records loaded the previosu day need to be deleted as the amounts may
     have changed). How can I achieve this selective deletion automatically in PC??
Appreciate your feedback very much.
Thanks... SMaa

Hi Shruti,
1) If i understand your requirement correctly you need to load only data which has 0NETDATE greater then sydatum.
So you can do this in infopackage .Infopackage>Data selection->0NETDATE(field)-->type(colum).here you can selecy ABAP type(6).Now you create ABAP code in this.
Here in ABAP code you need to specify high and low range ,Also the relation character like GT or BT(between).
i guess some how ur code will look like this
$$ begin of global - insert your declaration only below this line -
TABLES: ...
DATA:   ...
$$ end of global - insert your declaration only before this line   -
    InfoObject      = 0NETDUEDATE
    Fieldname       = NETDUEDATE
    data type       = NUMC
    length          = 0000010
    convexit        = PERI6
form compute_NETDUEDATE
tables l_t_range structure rssdlrange
changing p_subrc like sy-subrc.
      Insert source code to current selection field
$$ begin of routine - insert your code only below this line        -
data: l_idx like sy-tabix.
          l_idx = sy-tabix.
          l_t_range-low = sy-datum.
          l_t_range-option = 'GT'.
          modify l_t_range index l_idx.
          p_subrc = 0.
$$ end of routine - insert your code only before this line         -
endform.
i am not sure about coding but you can surely do it it is like specifying the ranges dynamically(you need to try it out)
(also as mentioned by others you can do this in traansformation routines)but infopackage routine you can directly write in PROD system.
2) And regarding the Selective deletion you donu2019t have nay process type in Process chain which does this
But there is function module u201C rsdri_infoprov_delete " which can be used to develop a program( I guess you must be having a existing ZProgram in ur system already available because this is used commonly.
Other wise you need to develop a ZProgram for this.
Thanks and Regards
Arun

Data selection in info package using ABAP routine.

Hi,
when we are scheduling the info package(Infp package name is like XYZ),we want to load past 6 months data from the current date(INFO OBJECT(0CREATEDON) BETWEEN (Sy-Datum - 6 months TO Sy-Datum),in the selection tab in schedule i want to write the abap routine (type 6).please can any one have this type of code please sedn to me asap.
this is very urgent.delivery is tomorrow.

hi Lekha,
try following code.
seems you post the same question twice, one posting is sufficient. and please don't forget to reward helpful answers.
data: l_idx like sy-tabix.
read table l_t_range with key
iobjnm = '0CREATEDON'.
l_idx = sy-tabix.
DELETE l_t_range
WHERE iobjnm = '0CREATEDON'.
L_t_RANGE-SIGN = 'I'.
L_t_RANGE-OPTION = 'EQ'.
if not work, try
L_t_RANGE-OPTION = 'BT'.
BT = between
last 6 month
L_t_RANGE-LOW = sy-datum - 180.
current date
L_t_RANGE-HIGH = sy-datum.
append l_t_range.
modify l_t_range index l_idx.
p_subrc = 0.
$$ end of routine - insert your code only before this line -
endform.

How to set the number of seconds a servlet is allowed to run

I use JSP to generate a report, but it will take about 10 minutes to search.
IE Client screen displays an error message what is "Cannot find out your page" after 8 minutes. How to set the number of seconds a servlet is allowed to run.

It's not a matter of how long the servlet is running... it's the browser timing out because the servlet hasn't responded to its request.
You have several options:
1) "Browser Pinging"
Your servlet sends some small data which can be either seen or unseen (html comments, hidden chars, etc) by the user at short intervals while your report is running. When the report is finished, the browser will not have timed out because it has been "snacking" on those small bits of data which tell the browser its original request was both heard and being handled. I don't think there is any timeout in IE as long as it receives data continually (or at least before its own timeout mark over and over again...)
2) Multithreaded processing
This would probably be a better approach. Have the report run in a separate thread running on the server. You'd want to store a reference to this executing report in the user's session. Instead of making the browser wait for the report to be finished, have the servlet check the user's session to see if a report exists and is running. If one does not exist, create one and start its execution. If one does exist, and is still running, print a "please wait" type of message OR an animation, etc... along with some javascript which will reload the page every few seconds. If the page reloads and the servlet sees that the report is finished, it can then display it to the user.
Hope this helps,
-Scott

Who will give the request number for a package?

hi
who will give the request number for a package , while releasing a package in se10 or se09

Hi Shivika
Please educate me, what is a package number? What does it relate? How and from where to get the number?
The package number i refer is the service package number. The package number is being asked for when i refer the tables ESLH and ESLL.
Regards
Vijay

How to set page number & current date in sqlplus result

how to set page number & current date in sqlplus result

Hi,
Use the TTITLE command. For example:
SET     PAGESIZE     15
TTITLE     LEFT &_date     RIGHT "Page:" FORMAT 999 sql.pno     SKIP 2
SELECT     ROWNUM
,     ename
FROM     scott.emp
;Output:
12-Jan-2011                    Page:   1
    ROWNUM ENAME
         1 SMITH
         2 ALLEN
         3 WARD
         4 JONES
         5 MARTIN
         6 BLAKE
         7 CLARK
         8 SCOTT
         9 KING
        10 TURNER
12-Jan-2011                    Page:   2
    ROWNUM ENAME
        11 ADAMS
        12 JAMES
        13 FORD
        14 MILLER
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only), and the results you want from that data. If your question is based on commonly available tables, like those in the scott schema, then you don't have to post any sample data: just post the output.
Explain how you get those results from that data.
Always say what version of Oracle (and other relevant softward, SQL*Plus in this case) you're using.

How to set maximum number of jobs in oracle

Could pls tell explain me about how to set maximum number of jobs in oracle....
Regd,
Mahi

I don't think there is any limit on number of jobs that can be submitted to Oracle. However, there is a limit on the number of processes that would execute those jobs (governed by JOB_QUEUE_PROCESSES).
Message was edited by:
Satish Kandi
Typo corrected.

How to set change number is prerequisite when change BOM?

Dear SAP Experts,
I have actived EC management in BOM control data in IMG. But when i changed
BOM ( the code CS02 ) with change number blank, system had not given an error message. SO,how to set change number is prerequisite when change BOMs?
Thanks...
Regards,
Joey.

Just a guess: Transaction os27 and change the number range to external.
Matthias

How to set default value of a table using sequence number

Dear all,
Does any body know that how to set default value of a table
using sequence number.
But I don't want to use trigger to do that.
Please help!!!!
Eldon

Andrew is essentially correct. You can get around the trigger,
but not the sequence, if (and this may be a very big if) you can
guarantee that every time an insert is done into the table, from
whatever source, the statement looks something like
INSERT INTO tbl VALUES (sequence.nextval,other_columns_values)

How to set the number of rings before voice mail answers?

How to set the number of rings before voice mail answers?

For me its:
1. Open the phone app and dial *#61# on the Keypad. Press the Call button.
2. Locate this text on the screen: "Setting Interrogation Succeeded, Voice Call Forwarding, When Unanswered, Forwards to +" and record the 11-digit number after the + symbol.
3. Touch the Dismiss button. Now enter this code on the Keypad: *61*+ followed by the 11-digit Forwards to number recorded in step 2, followed by *11 and *ringtime#. Ringtime is the number of seconds you want your iPhone to ring before voicemail picks up. Your finished code should look something like this:
*61*+18555513466*11*30#
In the example above the ring time is set to 30 seconds. Press the Call button.
4. You should receive the message: Setting Activation Succeeded. Press Dismiss and next time you receive a call it will ring for the new amount of time before going to voicemail.

How to set the number of rings for the agent phone rings before it get the not prepared state

hi, how to set the number of rings for the agent phone rings? before it get the not prepared state.
thanks

The following assumes that you are using ICM with an IPIVR etc (not using CVP), as the answer is different for CVP
What you are looking for is called "Ring no answer time". It is set in the Agent Desk Setting List tool.
Regards,
Kevin

How to create REQUEST NUMBER for STANDARD TEXT (SO10)

how to create REQUEST NUMBER for STANDARD TEXT ( t-cODE SO10)

you can do this using program RSTXTRAN .
Text key - object
Text key - name
Text key - ID
Text key - language, then it will store under one transport that can be moved to other system.
check out the following link.
http://help.sap.com/saphelp_47x200/helpdata/en/f4/b4a1ed453611d189710000e8322d00/frameset.htm

How to set fetchsize of sql Query when using Database Adapter.

Hi All,
I am using DatabaseAdapter to connect to database and retriving huge amount of data.For improvement in the performance I want to set the "fetchsize" of sql query. I know fetchsize can be preset in Java using Jdbc 2.0 API.Please let me know how to set this value in BPEL when using DBAdapter?
Thanks
Chandra

I talked to the developer of the db adapter - and he told me this feature will be available in BPEL PM 10.1.3 (which is supposed to be production later this year, and a public beta soon). If this is an emergency I would recommend going throug Oracle support and have them file an enhancement for 10.1.2.0.2
hth clemens

How to set a variable in portal session using web dynpro java.

Hi,
I have created a web dynpro application, which is running inside portal. I have created a role called "R1". Inside role R1, i have created 3 workset W1, W2 and W3. and inside each workset i have some pages and iviews.
My requirement is when user logins to the portal , and when he clicks on role R1 for the first time, a login page should come (so that we can do revalidation), and when he enters his password again in that login page , then only workset W1, W2 and W3 should be visible/accessible to him and after successful revalidation, if he clicks again on role R1, in that particular portal session, than that login page should not come.
for this, i thought i will set a variable in portal session, whenever user successfully revalidated himself, and if after successful revalidation he clicks again on role R1, i will check in doinit method of webdynpro whether variable is set or not (which i already set on successful revalidation), and if it is set then i will do Donavigation else i will present login page to the user.
Can anyone tells me how to set a variable in portal session using web dynpro java.
thanks
Arush

Hi,
Try this:
WDScopeUtil.put(WDScopeType.CLIENTSESSION_SCOPE, key, value)
WDScopeUtil.get(WDScopeType.CLIENTSESSION_SCOPE, key)
Ex:
WDScopeUtil.put(WDScopeType.CLIENTSESSION_SCOPE,"Key1","Value1");
String value1=WDScopeUtil.get(WDScopeType.CLIENTSESSION_SCOPE,"Key1").toString();
/people/william.cui/blog/2007/02/12/sharing-session-context-between-parent-and-external-windows-running-on-same-host
Regards,
Charan

How to set value for trim and bleed using jsx script?

I have tried using bleedoffsetRect but somehow it is not working. Can anybody please help me on how to set value for trim and bleed using jsx script? Any example will be highly appreciated.
Following is the code I am trying with:
var _saveName = new File ( root_path +_strFileName+".pdf");
    var _saveOpts = new PDFSaveOptions();
    _saveOpts.printerResolution = 300;
    var bleedarray = new Array();
     bleedarray[0] =9.00;
     bleedarray[1]=9.00;
     bleedarray[2]=9.00;
     bleedarray[3]=9.00;
    _saveOpts.bleedOffsetRect = bleedarray;

I would expect although I've not actually tried this for the bleed off set box to be larger than the artbaord and the first two values to be negative or 0…
var bleedarray = new Array(-9,-9,artboard.width+9,artboard.height+9);
Where 'artboard.width' & 'artboard.height' you will have calculated from your file. An Array(9,9,9,9); would not constitute any boxes bounds.

How to set request number of info package using start routine

Similar Messages

Maybe you are looking for