How to set ZERO "Ext. Amount LC"(EXBWR) during goods movement?

Dear friends,
Can you please help to suggest?
I have set "Ext. Amount LC"(EXBWR) to be an open field in 309 posting, and it seems that
I cannot enter 0 amount in the field. Even I entered 0, system will still make the same posting
as the field is blank.
Is there any user-exit/BAdI I can use to achieve it?
Thanks a lot in advance.
Best regards,
Polly

hello
when u put 0 SAP dont considers as any value in the field and it treats as blank
and the accounting is done as normal.
so if u want that the value to be posted as 0 to the receiving material than put the value as 0.01
this would be work round
hope this helps

Similar Messages

How to Resolve Error: An error as occurred during the move process.

I am trying to MOVE folders from my Desktop to an External Drive. Error "An error as occurred during the move process. Some files may not have been processed." I regularly Move Folders and I've never had problems before. Why is this happening and how do I resolve? Thanks in advance!

Nevermind. Just figured out my External Drive does not have enough space left. I'm so glad I wasted half a day trying to figure that one out!

How to set zero point at upper left corner of page

In my document, I have tried to use the "Units & Increments" preference settings to make the upper left corner of my pages be the zero point for the x and y coordinates. But, if I draw a box on the page then type in the coordinates as zero, the center of the box will align with the upper left corner of the page. I need for the upper left corner of the box to align with the upper left corner of the page. Does anyone know how to fix this problem?

You can also find information on this in the InDesign help.
Launch the help file. Search for:
Setting the point of origin for transformations
or
To transform an object
hth
-mt

I would like to know how to set zero the enviroment var authlifetime in a directory express's template

when an user authenticate in the directory express, he can see information the others users.

It is best to leave the settings of a LCD monitor to its native resolution.
You can use an extension to set a default font size and page zoom on web pages.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

How to set a vendor as fixed vendor during PR creation

Dear experts,
There is a field in PR for fixed vendor. How this fiexed vendor determined by SAP during PR creation. How can i ensure that certain vendor will be selected automatically as fixed vendor for some material and service so that during PO creation for the PR , used donot need to put vendor.
Kindly help
Thank you.
Best

Hi,
Create source list(ME01) for material and you can fix the vendor by entering vendor number ( also you can have period duration From & To of fixing)& selecting check box Fixed Source of Supply & save.
Now during creation of PR (ME51N), select the check box of source determination, then enter other details and save.
OR
You can go for Quota arrangement process & the details are in the link:
Re: quota arrangement?
Regards,
Biju K

How to set restriction on shared folder to copy or move images and videos

Hi,
I am using windows server 2008 for file sharing, it's simple folder sharing and there is no additional roles added and not promoted as file server.
Users have permissions to access folder and they can put data on shared folder but I want to restrict user that they can not copy any images and video on it.
Need urgent help to stop copying images and videos on shared folder.

If you need to restrict only certain types of files, then file screening is what you need. Windows Server 2012 R2 comes with a powershell module for FSRM, so you can script configuration of file screening.
The code will look like the following (this is only an example):
New-FsrmFileGroup -Name "Images and Videos" –IncludePattern @("*.jpg", "*.mpg", "*.avi", "*.tif", "*.mp4", "*.mov")
$Notification = New-FsrmAction -Type Email -MailTo "[Admin Email];[File Owner]" -Subject “Warning: attempted to create a video or image file” -Body “You attempted to create a video or image file on a share that does not allow storage of this type of files.” -RunLimitInterval 120
New-FsrmFileScreen -Path "C:\Shares\FileShare1" –IncludeGroup "Images and Videos" -Notification $Notification -Active
Gleb.

How to set my own password generationg logic, during reset password

hi,
I am working with IDM 7. The requirement is that, when reset passwrod is selected, IDM generates a random password for the user selected. I want to keep my onw password generaton logic to be applied.
Where i need to change to keep my own logic?
In reset password WF there there are activities reprovision, commit. I am not sure where exactly i need to apply logic.
Plese put some light on it.................

Hi,
Thanks for the link and thanks Faisal for your answer. i already seen it, but i thought there is a nother way to do it.
One more question: do i need to extends UsernamePasswordLoginModule while implementing my own LoginModule?
I prefer not to do it since i do not want to add weblogic imports in my code.
Thanks,
Arik

How to set a fixed row in ALV,that donot move with scroll bar?

hi,expert.
The 'fix_column' can fixed column, but what is for row?
thanks.

Hi
Nothing to fix a row
Max

How to Default Cost Center During Goods Issue (tcode: MB1A) To Prod Order

Dear Experts,
How to default the Cost Center/ Profit Center during goods movement posting?
Currently, for Goods Issue transaction, the cost center show blank. Even i have default C.Center in cost element (OKB9)
Where to link Cost center/ Profit Center to MM module?
Need your help.
Thanks,
Kiran D

a. If you want to default a cost center to the transaction then use substitution. Give the default profit center in the cost center. so profit center will also get defaulted.
b. if you want to default the GL account then configure it in OBYC, then use OKB9 to give the default cost center and profit center.
anantha

How can I hide non visible layers during test movie ?

Flash CS5
I have a layer I am using for construction purposes, it shows though in test movie. If I go to publish settings and untick include hidden layers on the flash tab, when I test movie, my cars don’t appear along the guide lines at all and just pop into view as movie ends.
How does one hide turned off visibility layers during test movie without affecting hidden guide lines ?
Envirographics

If I have a layer that is only acting as a guide for laying things out or whatever, what I do is right click that layer's name and select "Guide" from the menu that appears. It will not appear in when I use Test Movie

How to set up Approval or Alter for Budget amount.

Hi,
We need to set Approval based on monthly Budget amount wise
ex: We set up budget amount Total year is 60000 based on GL Account (Service Charges)wise in Budget scenario set up per month is i.e., April 5000
May = 5000
June = 5000
July = 5000
Aug = 5000
Sep= 5000
Oct = 5000
Nov = 5000
Dec = 5000
Jan = 5000
Feb = 5000
Mar = 5000. when user is adding more than 5000 for the month April though this service charges general ledger account in AP Invoice or Manual Journal entries or Out going payment we need to give alter like you need get approval, after getting approval only he need add these documents. Here we have taken example he got approval for 6000 for the month April. next month he may added 2000 through service charges acct here remaining 3000 we need to carry forward to next month and we need to show in alter when he using service charges general ledger account available budget balance for June is 8000 but here also if he using more than 5000 for the June month same Approval we need to show like You need to get approval. How we can set up for this? This is my query below
SELECT T0.BudgId, T0.Line_ID, T0.DebLTotal, T0.DebSTotal, T0.DebRLTotal, T0.FtrIDRSSum, T0.FtrODRLSum, T0.FtrODRSSum, T0.MonthPrcnt, T0.AcctCode FROM BGT1 T0 WHERE T0.DebLTotal >5000 and T0.Acctcode=4110101001 this query I added in terms under Approval template set up for AP Invoice but when am adding Ap invoice through Service charges GL account itu2019s not showing approval message. Please guide me how to solve this?
And Case 2. I tried though SP also to block if Budget amount exceed in AP and Manual Je but it's not blocking documents. Below SP
Begin
set @check1 = ((select inv1.linetotal from bgt1
cross join inv1
WHERE bgt1.acctcode=inv1.acctcode and inv1.Docentry=@list_of_cols_val_tab_del))
set @check2 = ((select bgt1.debLtotal from bgt1
cross join inv1
WHERE bgt1.acctcode=inv1.acctcode and inv1.Docentry=@list_of_cols_val_tab_del))
If (@check1 >@check2 )
begin
SET @error = 10
SET @error_message = N'You Need take Approval from Finance Head, please forward mail to FH....'
end
end
Please guide how to setup Alters or Approval or SP for these requirements.
Regds,
Sampath Kumar.

Hi,
the above requirement we are going develop add on.below code is there. in this code how we can set for line level amount instead of document total amount
Private Function GetCondition(ByVal sCondition As String) As ApprovalTemplateConditionTypeEnum
        Try
            Select Case sCondition
                Case "Deviation from Credit Limit"
                    Return (ApprovalTemplateConditionTypeEnum.atctDeviationFromCreditLine)
                Case "Deviation from Commitment"
                    Return (ApprovalTemplateConditionTypeEnum.atctDeviationFromObligo)
                Case "Gross Profit %"
                    Return (ApprovalTemplateConditionTypeEnum.atctGrossProfitPercent)
                Case "Discount %"
                    Return (ApprovalTemplateConditionTypeEnum.atctDiscountPercent)
                Case "Deviation from Budget"
                    Return (ApprovalTemplateConditionTypeEnum.atctDeviationFromBudget)
                Case "Total Document"
                    Return (ApprovalTemplateConditionTypeEnum.atctTotalDocument)
            End Select
        Catch ex As Exception
            MsgBox(ex.Message())
        End Try
    End Function
Please guide me.
Regds,
Samapth Kumar.

How to set propose final invoice amount indicator in MIRO document

Hi,
How to set propose final invoice amount indicator in MIRO document as similar to FB60 Editing options indicators.
Regards

Hi,
You can not. Having such an indicator would make no sense in MIRO.
Kind regards

How to make function: line amount total and final colum total at the bottom (Acrobat pro 9)?

The form is like this:
col 1
col 2
col 3
col 4
col 5
Row 1
amount
amount
amount
line total
Row 2
amount
amount
amount
line total
Row 3
amount
amount
amount
line total
Row 4
amount
amount
amount
line total
Row 5
colum total
colum total
colum total
colum total
The problem is that even though the calculation seems to be right, the final total, colum totals and some of the line totals don't update. The sum remains zero.
Could there be a wrong tab order? Could somebody tell me the right order? I've tried several variations, but I just can't get it work . Could somebody help me please?
Thanks in advance!

It's most likely an incorrect field calculation order, which is not at all related to the tab order. In case you don't know how to set it, select "Forms > Add or Edit Fields" to go into form editing mode, and then select "Forms > Edit > Set Field Calculation Order".
Arrange the order so it makes sense, which looks like it should be:
col 2 total
col 3 total
col 4 total
Row 1 total
Row 2 total
Row 3 total
Row 4 total
Row 5 total
Other arrangements might be just a correct, but it's important that the row totals are in that order. You should also check it again when you have the form ready to distribute to make sure it hasn't changed as you've done further editing.

How to set parameter in rtf template

Hi,
I've created a data model query using a parameter in BI Publisher Enterprise. When I'm showing the data I'm first ask for the parameter value.
Now I want to create a rtf template in BI Publisher Desktop. What do I have to do that the user can set the parameter and then see the result? So how to set the parameter in my query?
Thanks
chrissy

Hey Chrissy... i am realy sorry, i have guided u in the wrong way...
Above which i have explained was about Variable....
To test passing a parameter value, ff you are using the:
XML Publisher Runner – on the Setting tab enter a new line containing:
Name: xslt. InvThresh
Value: 1000
Template Builder
In the config file under <<TEMPLATE_BUILDER_HOME>>/config enter under the Properties section:
<property name="xslt.InvThresh">1000</property>
<xsl:param name="InvThresh" select="0" xdofo:ctx="begin"/>
InvoiceNumber Inovice Amount
Grp: Invoice13222-2 $100.00EFE
Grp: Invoice= <?for-each:G_INVOICE_NUM?><?if:ACCTD_AMT>$InvThresh?>
13222-2 = <?INVOICE_NUM?>
$100.00= <?ACCTD_AMT?>
EFE = <?end if?><?end for-each?>
Hope this will help u out....
sorry for tht .....
Thanks
Praveen Gollu.

How to set buildID.xml and custom.properties in SDK

Hello,
I just completed a new build deployment of SAP ME5.2, because after I deployed the new version, I don't think I have set a
correct version number.Can you someone give me a sample how to set the buildID.xml and custom.properties? I am a new on the SAP ME5.2
The Base version is ME_Base_5.2.5.16.5_netweaver-71_Update.zip and
MEClient_Base_5.2.5.16.5_netweaver-71_Update.zip. the HB customzation
version is ME_xxxxxx_2.0.0.0.x_netweaver-71.
Within the sap note 1484551, you mentioned we need change the
SDKInstallDir/build/buildID.xml file, here is the context of the file:
buildID.xml -
<?xml version="1.0" encoding="UTF-8"?>
<buildID xmlns:xs="http://www.w3.org/2001/XMLSchema">
<customer>XXXXXX</customer>
<revision>1.0.0.0</revision>
<build>1</build>
</buildID>
buildID.xml -
1. how can we change the revision and build?
There is another file BuildToolDir/build/script/custom.properties, here
is the file context:
custom.properties----
This file contains build properties used to configure the build
system.
The name of the software vendor implementing the customizations.
vendor.name=xxxxxxxxx
Vendor build identifier. This value is used to uniquely identify
customizations built by a particular vendor for a particular customer
and base
application version.
This is also used in path locations and in naming certain build
artifacts, like the custom EJB module and the utility classes archive.
vendor.id=xxxxxxxxx
The installation of the J2EE engine installed in the development
environment.
ex. C:/usr/sap/CE1\J00
j2ee.instance.dir=J2EEInstanceDir
The web context path used to access the main web application. This
is used by the build to set the
context-root value in application.xml after an update has been
imported.
web.context.path=
The web context path used to access the production XML interface web
application. This is used by the build to set the
context-root value in application.xml after an update has been
imported.
xml.context.path=
The web context path to access resources from the web extension
application, like images and work instruction HTML files.
web-ext.context.path=web-ext
The target database vendor. Valid values are 'oracle' or 'sqlserver'.db.vendor=ORACLE
The JDBC driver configured for the application server.
db.drivername=VMJDBC
JDBC connection propertes for the WIP (Work In Process) database.
This is the primary application database.
db.wip.driverclassname=
db.wip.driver.url=
db.wip.host=
db.wip.port=
db.wip.sid=
db.wip.user=
db.wip.password=
JDBC connection propertes for the ODS (Open Data Store) database.
This is the offline reporting and archiving database.
db.ods.driverclassname=
db.ods.driver.url=
db.ods.host=
db.ods.port=
db.ods.sid=
db.ods.user=
db.ods.password=
Flag indicating whether to add DPMO NC codes to NC idat files when a
new update is imported. This value is initially
set by the installer according the the user selection.
dpmo.nc.codes=
The default locale used by the production system. The default locale
is the locale used to display locale
specific text and messages when the requested locale is not
available. This property does not need to
be set if the default locale is english.
default.locale=en
Used when running the build from Eclipse to locate the java compiler
used by the WebLogic EJB compiler.
jdk.home=C:/Program Files/Java/jdk1.5.0_20
Compiler debug mode. If set to 'true', debug symbols will be
compiled into the byte code.
compile.debug=true
Keystore alias
security.alias=xxxxx
Keystore password
security.storepass=ChangeIt
Key password
security.keypass=ChangeIt
Keystore type (jks=default,jceks,pkcs12)
security.storetype=jks
Optional source control build identifier that is to be displayed with
standard version information.
scs.build.ID=
Optional extended version information to be displayed with standard
version information.
ext.info=
custom.properties----
2. How can we change this here?
Regards,
Leon Lu
Edited by: Leon Lu on Aug 4, 2011 11:14 AM
Edited by: Leon Lu on Aug 4, 2011 11:21 AM

Hi,
I created one request with logo in the header an page in the footer etc. and called StyleSheet. After you can import this formats by each request.
You can do this in compound layout.
Regards,
Stefan

How to set ZERO "Ext. Amount LC"(EXBWR) during goods movement?

Similar Messages

Maybe you are looking for