How to setup/export highest quality?

New to Premiere and video editing. This is my first project. I could use some beginners advice on setting up/exporting frame size, dimensions, rate, etc.
I created some Premiere projects from some Mini DV footage I got transferred to .mov. I want finished movies to be the same dimensions.  File size isn't important - just max. quality. I just opened a new doc and used the default settings and did a bunch of editing until I liked it. I'm not sure if the ori. file size is 640 or 720. For export, I chose all the max. quality settings but my first finished export .mov showed unwanted lines (top image, bottom is original mov w/ info. Hosted version: http://postimg.org/image/yfx72o4nt/
How do I export a cleaner version? Do I need to change the Premiere project dimensions when starting a new project to match the original video, or can it be done after? (would like to salvage the hours of editing).
Here's a screen cap of the original mov with the default Premiere settings I used.
LMK if I need to relay more info..
Mac 10.6.8 / PP CS6

TheOriginal150mph wrote:
I thought maybe the original was 640x480 and because the default PP setting I used was likely something larger, there were lines because Premiere stretched it out. So, I'm just lucky the default settings are 640x480? I dont understand where the 720 number fits in on my examples above.
I believe your source is in fact 720x480. Your exported file is displayed in 640x480 in QT likely due to a crop applied.
See:
Clean Aperture Mode
An image’s clean aperture is a region of video free from transition artifacts caused by the encoding of the signal. This is the region of video that should be displayed.
In this mode, the video track is cropped to the Clean aperture mode and scaled according to the track’s pixel aspect ratio. For example, a 4:3 DV NTSC track appears as 640 x 480; a 16:9 DV NTSC track appears as 853 x 480.
Via: Final Cut Pro 7 User Manual
If you'd like to read up on pixel aspect ratios, check this out: Adobe Premiere Pro Help | Working with aspect ratios
Another noob question. Is there a keyboard shortcut for "go to end of project", or  "go to beginning"?  (like in Adobe Director) I dont see any playhead-like controls..
If you're talking about the beginning and end of a sequence, try hitting the 'Home' and 'End' keys on your keyboard for that.
Your export settings look fine to me. Couple more suggestions:
Have you tried playing back the exported file with any other applications? E.g. VLC media player?
Other formats you can try: AVI (Uncompressed) (watch out for file sizes) and H.264 with a NTSC DV preset (supports progressive).
It's been ages since I last worked with DV/interlaced footage though, so I'm afraid I'm outta my depth here!
Did a search, found an old thread with some info that might be relevant? Quality problems when exporting mini DV AVI clips CS6 ...

Similar Messages

  • How to Produce the highest quality picture onto DVD or Blu-Ray

    I have recently started looking at new video cameras and software. I will soon purchase FCS. One thing that I cant get a clear answer on is how to produce a high quality DVD / Blu-Ray Disc.
    I stumbled upon a cinematographer by the name of Ray Roman. He is producing the kind of wedding videos that I want to produce in the near future. I see that he answered one of his followers by saying he shot the wedding with Cannon 7D DSLR cameras.
    Here is a link to the video I am speaking about.
    Ps. You need to scroll down a little to see the video.
    http://rayromanblog.com/2009/10/stephanie-tims-wedding-in-big-canoe-georgia/
    Can anyone tell me if they believe that was shot with a DSLR type camera, and if so what steps do you believe were took to create such a high quality final product.
    1. What type of software is needed to produce this?
    2. Does it have to be a Blu-Ray disc to hold that clarity?
    3. Does FCS support Blu-Ray?
    4. If FCS does not support Blu-Ray can I Export the project to Roxio 10 Pro to make the Blu-Ray disc?
    If I am totally off in left field Please Please Please let me know your opinion as to the best methods you have found to end up with a high quality product like that.
    What I really need to know is
    1. What camera will capture the correct info to start with
    2. What software will edit it and encode it without losing all that high quality data
    3. What way to burn the project to disc to again retain all the clarity, brightness, sharpness etc...
    Thanks for you help Ron...

    I'm at work so I can't see the video, but I can answer some workflow questions for you. If you see lots of shallow depth of field shots it was probably shot on an HDSLR. That's about the only thing they have going for them video wise.
    1) Without watching it I'm willing to guess it could all be done in Final Cut Studio or seeing CS4 in your signature, Adobe Creative Suite 4 Production Premium/Master Collection (Premiere/After Effects).
    2) DVDs only show SD video. You can do anamorphic video to get widescreen video on a DVD, but anything 720p and up will require more than a DVD disc. You can also letterbox your video to get faux widescreen on a DVD.
    3) FCS doesn't really support blu-ray. Apple in general does not support blu-ray. You can export to a codec that is blu-ray friendly but there is no blu-ray authoring software, nor can any Mac be purchased with a blu-ray drive to my knowledge.
    4) There are lots and lots of ways to export from Final Cut Studio. I'm sure you can find several wrapper and codec combinations that Roxio will accept. The level of compatibility is a different issue..do you need subtitles, chapter markers, etc. If you need more than a video clip you'll probably hit some hurdles.
    1) I'd avoid an HDSLR to get started out. They are a pain in terms of workflow. You have to transcode (convert) all the video from the nasty H.264/PhotoJPEG codecs they record in (H.264 for the Canon cameras, PhotoJPEG for the Nikons) if you want them to be friendly in Apple's Final Cut or Adobe's Premiere.
    It is important to understand video comes in a few types of formats, acquisition formats, editing formats, and delivery formats. A .mov file is a wrapper can be contain perhaps hundreds of different codecs (only one at a time), AIC, ProRes422, ProRes4444, Animation, the list goes on and on, it is the codec used that is important. H.264 is a compressed, lossy video codec developed for delivery and now used for acquisition in consumer devices. Editing software wants something simpler to edit with, like Apple ProRes422 or AIC for Final Cut. Transcode it and you won't have to render out every frame (let the computer build a preview video in an editing codec so it can play it back smoothly), then re-render when you do so little as add a cross dissolve.
    That also doesn't even begin to look into the audio issue. Using an HDSLR for video capture basically says you need a separate device (and likely another operator) for audio acquisition. These will have to be synced up in post.
    I'd say do yourself a favour and get a video camera if you want to shoot video. When you've got a feel for the workflow and a better understanding of what you're up against an HDSLR can liven up your shooting with some shallow depth of field effects.
    2) Final Cut Studio and Creative Suite 4 will both work with 7D video, but the 7D doesn't shoot "high quality data." The video it shoots is H.264, or compressed. Think of it as though every frame has gone through Photoshop and been saved as a JPG with the quality setting at 3 or so. It looks pretty good if you blow the background out of focus, but it has inherent issues that make it not the best for every situation.
    3) The best way to retain image quality is good workflow from beginning to end.

  • Trying to export highest quality audio, video needed but doesn't matter.

    Hello,
    What I'm hoping to do is to create a video for youtube with the utmost highest audio settings and quality, and just a black video with the lowest settings.
    I generated a simple tone in Audition and saved it as a .wav with 96k Hz, Stereo 32-bit.
    And in Premiere I chose H.264 with AAC with these settings
    Now these aren't the settings I am set on, if there are better settings I'm willing to change but my problem is when it exports the Sample Rate is 48k Hz.
    Is there any way I can get the bitrate up to 512 kbps as well?
    Note that youtube has to have a video pass in there too.
    Thank you.

    Choppsta,
    If you are an audio engineer, please forgive me and feel free to jump to the end of this post. If not, perhaps I can offer a little information.
    Keep in mind that the number of samples per second is not actually a perfect indication of sound quality. It is one indication of how true the reproduction of the original analog signal is, but that leads me to ask what the original signal is? What sample rate was used in the creation of the digital signal.
    Sample rate only applies to the original conversion from Analog to Digital. After that, increasing it has zero value. In fact, changing it requires resampling which can only lead to a generational loss. There is no quality increase created by sampling previously sampled audio.
    The other thing that determines the quality is the number of quantization steps. The more steps, the more accurate the reproduction.
    Most video's audio is 48,000 samples per second, while CD quality is 44,100.
    So, unless the original audio was recorded at 96,000 samples per second, there is no value to exporting that way. I understand that you encoded the tone at 96K, but that tone isn't your ultimate goal is it? Because 48,000 samples is more than sufficient for any tone you can actually hear. A 1KHz tone would be sampled 24 times on the positive portion of each wave and 24 times on the negative portion. Well more than enough for you to not be able to detect the difference on any PC or television between that and a 44,100 tone. Sampling twice as often will not be detectable by even the most finicky audiophile. Not at 1KHz anyway.
    Now, if the analog sound is quite rich, and the analog is sampled at 96,000, then yes, an audiophile may very well be able to detect it in the higher ranges and overtones.But not most music, and certainly not by anyone who thinks that CD quality is sufficiently high quality. Also, most PCs and televisions are not capable of reproducing the audio as accurately as 96,000 might indicate. It would require special hardware (more on that later).
    Having said all of that, if I export the video using 96K for the audio, I see that it is apparently coming out at 48K when imported into Adobe Premiere Pro and Audition.
    MediaInfo seems to be confused by the audio also. Or it is trying to tell us something. Stick around for a really geeky explanation of what it is trying to tell us.
    GSpot sees it as 48K AAC LC.  And that is really the key to the answer to your question.
    Now we get really geeky.
    AAC+ Version 2 uses spectral band replication (SBR) to enhance the compression efficiency in the frequency domain. MPEG-4 AAC LC decoders without SBR support (most of them?) will decode the AAC LC part of the audio, resulting in audio output with only half the sampling frequency, thereby reducing the audio bandwidth.
    That is why you are seeing 48K. Unless you have the right hardware tucked away in a fancy studio somewhere? Then there is probably software/firmware that came with that equipment that is capable of playing it.
    And no, there is no way to bump it to 512Kb/s, and no real reason to do so either. Even if you could, you might find that no player could actually replicate it, or maybe even attempt to play it.
    I hope this helps.
    Edit: This might be a perfect question to ask of Jason Levine. He is an Adobe Evangelist and came out of the audio side of the house if I recall correctly. The best I can do is offer up his BLOG where you might be able to contact him: http://boodahjoomusic.com/

  • Export HIGHEST quality to iDVD

    How do I maintain the crisp quality I see on my timeline? When I export to QT and send to IDVD, it unfortunately looses much quality. Very noticeable around edges of letters.
    I looked in the manual and it shows a dropdown menu for FORMAT at the bottom of the SAVE screen. However, mine does not have this option! It offers INCLUDE & MARKERS and a check box for making the movie self contained. Since this is THE latest version of FCE, I don't understand why mine is different than the manual.

    I'm not sure if this will help, but when you export to Quicktime you can uncheck the "Make Movie Self-Contained" option. This appears to not render the sequence, but instead just export the meda data for QT to reference.
    I assume since it does not re-render the sequence you not only save a lot of time, but won't lose quality when you import into iDVD. iDVD does however render the movie to MPEG2 so if you still get quality lost it might be due to that.

  • How do I export Full Quality from iMovie 11?

    Basically, I want to export a version in as high a quality as possible for archive purposes. So if in the future, I need to convert to as-yet-undeveloped file types, I have as close to the (edited) source as possible. iMovieHD had a "Full Quality" setting, but I don't find that in iMovie 11. The closest I've found is Apple Intermediate codec (which is what iMovieHD seems to have saved them as when set to Full)

    It creates a .dv file is the footage is standard def. The HD projects (1080i) saved as .mov files, intermediate codec. I think even though I imported the footage at "full", as soon as I added transitions, it seems to have down-converted to "large". So none of my export options deliver anything bigger than 960x540. I guess transitions force that?

  • How to...highest quality mpeg4 for youtube?

    I have posted video's on youtube but they always have poor resolution. Any suggestions on how to improve these?
    I've seen some other videos that look very good, but when I transfer my QT to MPEG4, the res changes significantly.
    If you help me, I'll give you a dollar.
    Regards.
      Mac OS X (10.4)  

    Since the file upload to YouTube becomes the source of their exported "Flash Video" you don't get much control over the end product.
    If you've given them your "best" and they give you "**" then that is what you'll get from any export.
    Try the Export to iPod settings (H.264 and AAC audio). They may butcher these too but it's the best you can send to them.

  • Dual Angles - How do I create highest quality output?

    Hey all,
         Football coach doing his best to use FCP to edit football videos for this season.  I've made some progress, currently I'm at a place where I've twisted things up a little bit and want to be able to get to the optimal output settings for my setup.  I have a MacBook teachers laptop, and 2 video cameras, a Sony HDR-CX110 and a Sanyo VPC-WH1 (with an Xacti card), which gives MPEG4 output.  I'm looking for optimal settings for the Sony camera, it was working well at first with Log and Transfer, but I've changed the settings more than once and can't remember what the best setting would be, I guess using the Easy Setup options?  The Sanyo I guess needs to be converted by MPEG Streamclip, using ProRes 422 setting, which I have some familiarity with since I use it for DVDs.  As we are in-season now, I don't have the time/energy to research all this stuff thoroughly enough, and the tech guy at school has been minimally helpful.  I'm not coming in totally blind, I have done research the last couple months, but I'm looking for someone to help me cut through the nonsense and get a routine I can get familiar with.  What I'm doing is taking video from each camera (2 different angles during the game) and intercutting the 2 angles.  What settings should I use to import this footage, and what do I need to be doing to produce output that plays well on Quicktime?  I've been able to get an intercut output through trial and error, but the output is sloppy, and this is making life miserable when I have 50 teenagers in a meeting room and I'm trying to rewind and fast forward plays quickly and sharply.
         Even though I'm sure I come across as not having more than a rudimentary understanding of FCP, I can assure you, I know less than you think.   I don't have a good understanding of output settings, EasySetup options, or input as far as what HDV is as opposed to Apple Intermediate Codec, etc.  I just know the steps I've been told to take, but I don't UNDERSTAND it.  I apologize for the rambling, I could use some help.  Thanks all for your time,
          Grouch

    Thanks Jim.  I checked out those tutorials, I'm still swimming a little bit though.  Does it make sense to go the multicam sequence route in my circumstances?  Right now, the typical work flow for a football game is for each camera operator to start and stop recording after each play to create individual files for each play.  For multicam it seems that it would need to have each camera running continuously instead?  Not sure battery life would enable that, but perhaps it would.  As these are 2 different brands of cameras, and they will be located 75 yards or so apart with different filmers, it's not realistic to have perfect sync.  I don't understand timecode that well, will the cameras be able to be synced within FCP if they are both running from start to finish without any pauses?  I.e. just find a sync point near the beginning and go from there?  We don't use audio for the shoots, does this make that more difficult/impossible? 
         Separate question, can I still use log and transfer for the Sony cam, or do I need to do something differently (such as using MPeg streamclip instead of log and transfer?) in order to have both cameras imported using ProRes 422?  If I use MPeg Streamclip, I don't believe I have the ability to log clips in log and transfer or log and capture, do I have that right?  Thanks again for your time,
         Grouch

  • How do I create the highest quality dvd of an iphoto slideshow?

    I have created a large (550 photos) slideshow in iphoto using one of the iphoto templates and added music to the slideshow.  The photos are high quality/large file size photos.  I would like to then combine the iphoto slideshow with an imovie trailer.  When I have gone through through the process of exporting the slideshow out of iphoto and into imovie and then burning a disk with idvd, the quality of the dvd is poor.  I am using the latest versions of iphoto, imovie, and idvd.  I would appreciate any advice on how to produce the highest quality dvd from the slideshow as it is part of a gift recapping a trip.

    Here's one approach: First crop the photos to the iDVD size ratio, 4:3.  Export the movie out of iPhoto via the Export button and select Size = Medium or Large.  Remember DVD video format is standard definition only.  All media gets reduced to 640 x 480 before burning to disk.
    Don't add it to iMovie as that just adds another layer of compresson/encoding to it.
    In iMovie create the trailer and use the Share ➙ Media Browser option.  This produces a better file image than the Share ➙ iDVD option.
    In iDVD create a Slideshow and add the trailer from the Media/Movies pane and drag the iPhoto movie after it.
    Set transitions to None and slide duration to anything but Manual.  Do not add any audio.
    Follow this workflow to help ensure the best quality video DVD:
    Once you have the project as you want it save it as a disk image via the  File ➙ Save as Disk Image  menu option.  This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image and launch DVD Player and play it.  If it plays OK with DVD Player the encoding was good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    If you find that the resulting movie/slideshow extends off the TV screen and looses some of the image you can set the iDVD/Slideshow preferences to Scale Photos to TV Safe Area. 
    That may add black areas to each side of the movie depending on the size ratio of the TV screen and aspect ratio set in the DVD player.
    NOTE: if you have access to a copy of iMovie 6 HD I suggest you use it for your slideshow from photos and the trailer.  It produces the best results with iDVD and allows far better audio control.  If you do have that version just drag the completed iMovie project file into iDVD to avoid another layer of encoding/compression.
    OT

  • Please help with highest quality export settings...

    I have searched the forum and web for hours (no joke!) and I am still trying to figure out what are the best video settings to give me the highest HD quality video in daylight. I am using a Canon HF200 and the latest updated version of FCE. My problem is that I am unable to produce an HD quality video at 1920 x 1080 Full HD without being "jagged". I have two questions; what do you suggest to be the best FCE import and export settings to produce the best HD video, and what settings do you have your HF200 set to (for normal daylight conditions), to produce the best HD video file? The file will be played directly thru my computer to a plasma HDTV.
    I have tried several settings, but using anything above 1280x720 16:9, makes the video "jagged". Again, I don't care about the size of the file or how long it takes, I just want the best. Is there something I am missing?
    My FCP settings are the following:
    I log and transfer the video from the camera into FCP (on a black MacBook; 2.16 GHz with 4 GB RAM) using the AVCHD Apple Intermediate Codec 1920 x 1080i source. I then export the video using the following:
    Export using "Quicktime Conversion".
    Quicktime options video settings are:
    Frame Rate set to "Current"
    Key Frames set to every "24" frames
    Compressor quality: "best" (Encoding set to "best quality")
    Data Rate set to "automatic"
    Quicktime options video size are:
    "HD 1280 x 720 16:9" (anything higher produces the jags!)
    Deinterlace source video is NOT checked
    My Canon HF 200 settings are the following:
    - P mode
    - FXP (17 Mbps)
    - 60i framerate
    all others are set to the normal default
    I have read some reports saying the above is good and others suggesting changing FXP to MXP (24 Mbps) and/or the framerate from 60i to PF30. I don't care about the size of the file, I just want the highest quality HD file.
    Any suggestions for the best FCE settings and/or HF200 settings would be very much appreciated!
    Thanks for your help,
    Evan

    Thanks again for the feedback
    Let me try my best to answer the above (I'm new at all this and I appreciate you guys taking the time to try and help me out).
    First off, I tried rendering and that did not help.
    Here is my sequence. I am not going into FCE from the camera directly. I have archived the video file from the camera using iMovie (as well as just making an exact copy of the camera files; they both appear to me to be the exact same, both can be logged and transferred into FCE, and both files give me a jagged FCE result).
    Once I log and transfer the file(s), I then take the clip and add it to a sequence file (rendering or not rendering the clip(s) at this point does not make a difference), and then click/highlight the sequence file in the browser and export it.
    As for "editing the video in a 1920x1080i60 sequence", I think I am. I am not doing any editing to the clip. It is logged and transferred using the AVCHD Apple Intermediate Codec 1920 x 1080i and then exported using either as a Quicktime Movie or Quicktime Conversion (set for 1920 x 1080 using H.264 compression; both ways still result in a jagged video).
    That's about it...log and transfer, add clip to sequence, and then export sequence...
    I hope this answers the above, but if not, I apologize; I'm still learning!
    Also, if I use iMovie, with similar export (share) settings, I get a non-jagged video (I have tried with deinterlacing and not deinterlacing, and both video results are fine)
    Thanks again,
    Evan

  • How do i export a video made in imovie to youtube in the best quality possible?

    how do i export a video made in imovie to youtube in the best quality possible?

    You can only export in the same resolution that you imported.
    That is if you shot in 720p you cannot export in 1080p.
    Share > YouTube and select the highest resolution available.
    Z.

  • How to Export High Quality Adobe Flash Professional CS6

    Okay, here's the situation. I've created a series of separate files of animations using .PNG images, and JPGs. Each animation is less than 1 minute long - and are separate files.
    I have tried exporting various ones, and have had absolutely no luck in getting anything resembling high quality. I mean the first animations made by humans were better quality than this.
    It's utterly ridiculous how bad this program works.
    Anyways...
    I've tried altering the frame rate, dimensions of the document, different export files, different players to view, I've gone into the settings and made sure the highest quality option is selected, etc. I've combed the internet for weeks and have read EVERYTHING on the subject (not much!!). I've also watched every relevant youtube video and nothing has worked!
    I am losing my mind over this.
    I even tried opening the files in Premiere and exporting them and they look even worse! What the hell is going on??
    The whole reason I began using Flash is because research led me to believe it was made for this purpose but it clearly can't do...anything.
    Is there any solution? Or should I just look into a different program?

    What Image Export Preset settings are you using?  (See and edit these via "Aperture→Presets→Image Export".)
    16-bit TIFF is the highest quality Image Format.  If you are using JPEG, set the Image Quality slider all the way to the right ("12").  Make sure size is set to "Original Size".  "DPI" has no bearing on image quality -- it is just a setting that some apps use to determine how big to display the image on the screen.

  • What are highest quality export settings from iMovie to FCE 4.0?

    I am using iMovie '08 to create Ken Burns effect movies from iPhoto photos to import into FCE. I want the least amount of loss from iMovie to FCE.
    What are the highest quality settings for exporting from iMovie to FCE.
    I do not care about size of file etc. Highest quality is all that matters to me.
    Cheers,
    Chuck

    Well here are the facts.
    My original question rephrased: "I want to know what are the settings to export Ken Burns created movies (therefore using photos) from iMovie (in this case iMovie '08) with the least loss and regardless of file size for importation into Final Cut Express".
    I went to the local Apple store and some of the users (employees) of Final Cut Pro mentioned appropriately they thought .DV would be the best. However when we played some created videos they looked horrible when compared to .MOV with H.264. This just did not make sense, but we went by what we were seeing. Not being able to think with this I did more research and found this article which explained why .DV lookes like pooh pooh compared to H.264 video.
    The article http://docs.info.apple.com/article.html?artnum=93002 explains a setting in Quicktime preferences that if not selected some videos appear pixelated.
    So, when this preference in Quicktime is selected (never thought to try playing on VLC) the .DV movies look better than those using H.264. So with this resolved then my trial and error testing was realistic. That is I could try different export settings and see which ones looked better to determine the best export setting.
    I tried what I thought was everything as far as "Export using Quicktime..." settings. Then I read in "iMovie '08 & iDVD: The Missing Manuals" under "The Video Codecs: A Catalog" an explanation of every type of compression when using the settings under "Movie to QuickTime Movie". Finally someone wrote more data on the codecs. I never found such explanation on the apple website (discussions etc). I really got tired of reading how H.264 is the better than sliced bread "greatest quality for the file size" which I think is true but did nothing to answer my original question. The book then mentioned the option "none". I was like I don't remember this option for "Compression Type". (BTW this all applies to iPhoto '08, Final Cut Express 4, and QuickTime Pro). So I tried "None".
    Wow! Zero pixelation! Vivid colors! So I created three videos. One using H.264, DV/DVCPRO - NTSC and None (I had already tried many others but for this last experiment just these three). I also maxed out the Quality for each compressor. Results:
    - H.264 colors looked a little faded from the original photos and minor minor fuzziness, file size about 6 MB
    - DV/DVCPRO - NTSC colors a little more vivid and less fuzziness, file size about 60 MB
    - None...Bam! absolutely photo quality resolution and color, file size about 600 MB. I didn't care about the size.
    So, bingo "None" as as the compressor settings in Quicktime to export iMovie '08 Ken Burns effect slide shows for importation into Final Cut Express (FCE) with minimal loss and who cares about the file size. Yeah, this is mammoth file but this allows me to make snappy Extremely High Quality Ken Burns effect videos in iMovie for FCE. Then when I export from FCE I don't make a copy of a copy but make my first compression of the video.
    That is my answer!
    I consider this thread closed and will only open if I find any of this is incorrect. BTW I already imported the iMovie '08 video with compression "None" into FCE and after rendering it looks awesome and plays well.
    Cheers,
    Chuck

  • Exporting at HIGHEST quality

    I am exporting so i can give to master engineer. how do i do it at highest quality? simply make sure compress is UNchecked? I had to reinstall everything on my comp so i lost my settings.
    also, GB records at 44,100 kHz, 16 bit, right?
    thanks

    make sure compress is UNchecked?
    yes
    GB records at 44,100 kHz, 16 bit,
    44.1k, yes.
    16-bit or optionally 24-bit if you set that preference before recording.

  • How to export best quality gif animations in flash

    how to export best quality gif animations in flash

    GIF is a color restricted format with on/off support for transparency. There's really no settings you can tweak to output a better GIF. You have a drop-down during GIF sequence export to allow transparency, select the amount of colors (up to 256) and you can choose dither to save a little filespace. The only 2 things in there that really matter are dither and amount of colors used to export.
    If your content is very similar (e.g. not a lot of complex gradients/shadows/etc) and is limited in color use turning down the amount of colors used and dithering is your only option.
    Make sure you're exporting the GIF via "Publish Settings" so you get a single animated GIF and not file->export->movie because this creates a separate sequence of GIF images for each frame.

  • When exporting to a DVD from Final Cut Pro X, what settings are there to make sure you making the highest quality DVD possible?

    When exporting to a DVD from Final Cut Pro X, what settings are there to make sure you making the highest quality DVD possible?

    There have been a lot of recent reports of difficulties sharing to DVD, but haven't been hearing about unreadable disks. Posibly there was an encoding error. Or it could have been bad media (blank disk).
    Does it play in your Mac?
    What brand of disks are you using?
    Russ

Maybe you are looking for