How to setup logical IP/hostname

Hi,
I need some help on setting up public IP and logical IP on sun cluster. I know that for public IP I need to setup IPMP for both custer nodes. But for logical address do I need to add entry to /etc/hosts for both nodes? Or sun cluster will do it automatically assigning logical hostname to your logical IP address during swithover?
Any help is greatly appreciated.
Thanks.

put an entry in /etc/hosts on all cluster nodes for your logical address name and the associated IP Address.
then
scrgadm -a -L -l <logical hostname> -g <resource group>

Similar Messages

Smart forms. How to setup logic for standard text usage.

Hi All!
Could you advise please is there a way, except abap programming, to setup in smart forms that different standard texts values (tcode so10) to be used based on different selected parameters (e.g. customers, vendors etc... ).
e.g.
For picking list smart form:
for customer A- standard text A to be used.
for customer B- standard text B....
Thanks,
Best Regards,
Andrey
Edited by: Andrey Kruglov on Mar 16, 2009 1:30 PM
Edited by: Andrey Kruglov on Mar 16, 2009 1:30 PM

HI,
Refer this thread:
Re: how to display symbols in smartforms
There is a standard smartform for invoice.
LB_BIL_INVOICE.
Refer this thread:
Re: Can anybody plz give me Smartforms print prog for Invoice/PackList
Regards,
Gayathri
Message was edited by: Gayathri Hariharan

I want to know how to setup the logicaladdress (cluster+HA+oracle)

I want to know how to setup the logicaladdress (cluster+HA+oracle)

Please have a look at:
http://docs.sun.com/app/docs/doc/819-0703/6n343k6g0?q=SUNW.LogicalHostname&a=view
for how to add a Logical Hostname Resource to a Resource Group (in that case the RG where you configrued ha oracle for).
There is nothing special for HA oracle on that part.
If you configure your oracle_listener resource for that specific logical hostname resource, then you should configure a dependecy from the oracle_listener to the LH.
By default the RG will have property Implicit_network_dependencies set to true, which should be enough.
If this property is false, I recommend adding the LH resource name to the Resource_dependencies property of the oracle_listener resource.
For a general overview I recommend reading:
http://docs.sun.com/app/docs/doc/819-0703/
Greets
Thorsten

How to setup a print spool in UNIX

Hi support, i am new to basis and to sdn..
could you please help me with how to setup a print spool in UNIX.
Thank you
Martin

Message 1 :
On UNIX:
1.     Login as sidadm
2.     Su - root
3.     Execute "jetadmin" (or use u201Csamu201D if you are familiar with it).
4.     Select option 1
5.     Select option 3
6.     Enter the IP address of the printer
7.     Select option 1 again and assign an appropriate queue name
8.     Follow the instructions to complete
9.     "lpstat -t" to confirm the printer is enabled
10.     Setup on R3
Message 2:
On SAP
1.     Transaction u201CSPADu201D
2.     Switch to change mode
3.     Chose Output Device
4.     Select Printer you want to create/copy/change
5.     To use or by pass DAZEL:
1.     use Dazel:
a.     Host Spool Access Method: E
b.     Host Printer: 1_usbprint03_xxxxxx
c.     Logical OMS: R3 SID Dazel LOMS
2.     by pass Dazel:
a.     Host Spool Access Method: L
b.     Host Printer: (queue name on UNIX Spool)
To test printing, try to print something (i.e. spool server list) and go to Transaction u201CSP01u201D to change the result.

How to setup Data guard for SAP database?

Can someone please tell me how to setup data guard for SAP databases?
Thanks,
Abhi

Hi Abhi,
have a look at OSS 105047 - Support for Oracle functions in the SAP environment you find this under
14
Oracle Data Guard
You can use "Physical Standby".
You cannot use "Logical Standby".
You are allowed to use Fast Start Failover (FSFO) but SAP Support is not provided.
You can use Data Guard Broker.
You can use Maximum Performance Mode, Maximum Availability Mode and Maximum Protection Mode.
In the case of Maximum Availability and Maximum Protection, you must pay particular attention to a fast network connection in order to avoid performance problems.
Maximum Protection causes the primary database to terminate if problems occur in the standby database.
And here you find on Oracle white paper from 2010 http://www.oracle.com/us/solutions/sap/wp-ora4sap-dataguard11g-303811.pdf
Perhaps some SAP user have answers for you http://scn.sap.com/community/oracle/content?query=guard
regards
Kay

How do I find DB hostname ?

How do I find DB hostname ?
Is there any difference between hostname and DB hostname ?
I have PowerBook G4 laptop. The command "hostname" produced the following output.
$ hostname
monica-kands-Computer.local
My understanding is "monica-kands-Computer" is the host name or DB hostname and "local" is the domain name, correct ?
How Do I change the DB hostname and domain name ?
Thanks in Advance.
-siva

Hi!
Normally the database global name does not have to have a relation with the hostname, although a lot of people do this.
Here are some explanations:
hostname (computer): normally a name of the machine you work on (eg pc015, mickey, aix_big_machine)
domain name (computer): groups machines in a logical manner (high level - your network people will explain it otherwise). Examples: sales.company.com, acme.com, my_department.region.company.com
hostname and domain name together are described as the fully quallified host name (eg. mickey.acme.com, pc015.my_department.region.company.com)
SID (Oracle): described the identifier (name) of the database.
Global database name (Oracle): describes an enterprise name in a database way. Often this is the same as the domain name (eg. SID=orcl Global DB Name: orcl.acme.com)
Hope this helps.
cu
Andreas

How to setup Sun Solaris 5.7 to perform routing

How to setup Sun Solaris 5.7 to perform routing and how to setup as a bridge.

Hi,
1.You will have to have two interfaces
Interface1 should be from network1
interface2 should be from network2
2.will have to create hostname.interface files for each interface
hostname.qfe0 hostname.qfe1
3.type hostname and ipAddressof each interface in /etc/inet/hosts
4.create /etc/defaultrouter file for static route
use "route" commands to create routes for the other interfaces.
Check out the docs.sun.com
Solaris 7 Administartion guide
TCP/IP Data Communication Guide
for more details
Thanks & Regards
Dhruva
Thanks & Regards
Dhruva

How can I change the hostname after Oracle Database XE is installed?

I currently have XE installed and working on my ubuntu machine.
When I change the hostname of my machine, oracle database no longer connects and says "ORA-12505, TNS:listener does not currently know of SID given in connect descriptor".
Can anyone tell me how I can change the hostname of my machine and keep oracle database working correctly?
Thanks

Stopping, reconfig, starting the instance is one way, although that is somewhat like using petrol to kill ants.
The database instance pretty much does not care about the hostname setting. But the listener does- the installer finds the hostname and uses that in the setup bits.
As posted somewhere here, when using the 1521 default listener port, the listener.ora config file can just be moved out of the way. Another potential fix is setting the HOST=0.0.0.0 for the IPv4 "any IP" address setting, or setting it to the correct hostname. Or HOST= can be set to IPv4 address. For IPv6, have to use HOST=<hostname> and it must resolve, can't HOST=... an IPv6 address.
To move the listener file, stop the listener first. To change a HOST=... setting, also stop the listener first.
lsnrctl stop
mv $ORACLE_HOME/network/admin/listener.ora $ORACLE_HOME/network/admin/listener.bk0
# or
vi $ORACLE_HOME/network/admin/listener.ora
# change HOST=<whatever> to the correct value, or 0.0.0.0
lsnrctl start
sqlplus /nolog
conn system
... password ... Connected.
alter system register;
exit
# start the lsnr
lsnrctl start
# check the status, services
lsnrctl stat
lsnrctl serv
If the host has a wireless (or another NIC) that one does not want to offer up remote connections on, the 0.0.0.0 is not a good way to go either
Message was edited by: clcarter
typos

How to use Logical database in function module?

I will create a function module in HR.
but how to use Logical database in function module ? Logical database PNP always show screen.in function (RFC) code , it is a matter.

You cannot attach the LDB to the main program of the function group.
- So you may [SUBMIT|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=submit&adv=false&sortby=cm_rnd_rankvalue] a report which use the LDB and get back the data (export/import), by default in the syntax of SUBMIT the selection-screen will not be displayed
- Use [LDB_PROCESS|https://www.sdn.sap.com/irj/sdn/advancedsearch?query=ldb_process&cat=sdn_all], fill a structured table for selection, and get data back in another table
- Use [HR function modules to read Infotypes|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=hrfunctionmodulestoread+Infotypes&adv=false&sortby=cm_rnd_rankvalue].
Regards

How to determine logical database in a program?

Hello guys!
How to determine logical database in a program on Eclipse?
I have not found any options:
Thanks!

Welcome to SDN
Check the table RSOSFIELDMAP
Assign points if useful
Regards
N Ganesh

How to setup three SharePoint sites on one server?

Hello,
How to setup three SharePoint sites on one server? I have three sites like:
http://site1
http://site2
http://site3
And need to have them running up on one server. I recall some changes need to be done to the host file, but not sure. Can you advise on what to change?
Thanks,
Paul
Paul

you need to make entries in DNS to get this done.
check here:http://spshare.blogspot.com/2012/05/how-to-create-host-header-web.html
nice blog with step by step explanation:
http://thuansoldier.net/?p=1323
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

How to setup multiple base station under one network?

How to setup multiple base station under one network? I have 6 rooms but one airport base station makes really difficult to get good signal from every rooms. I wonder if I can setup multiple airport base stations talking to each other under the same network to build up the signal strength will help solve this problem. But, is it possible? How?

One route would be to utilize a "roaming" network. In a roaming network, you would connect multiple AirPort Extreme Base Stations (AEBS) to the same Ethernet. Of course, this would require that your home is already wired for Ethernet.

How to Setup SSL on Oracle Application Server 10g Release 2 (10.1..2)

Hi All,
Can anybody tell me How to setup the SSL on Oracle Application Server 10g Release 2 (10.1.2).
I have all the required documents like
1. Oracle Application Server Portal Server Configuration Guide.
2. Oracle Application Server Web Cache Configuration Guide.
3. Oracle Application Server SSO Administration Guide.
I tried to follow all this documents but still i am not able to set SSL for Oracle Portal Server.

The Portal Configuration Guide, available on OTN at http://www.oracle.com/technology/documentation/appserver1012.html does provide some very specific information on how to set up OracleAS Portal.
Section 6.3.2.1 Configuring SSL for OracleAS Portal describes various configurations, such as:
SSL to OracleAS Single Sign-On
SSL to OracleAS Web Cache
SSL Throughout OracleAS Portal
External SSL with Non-SSL Within Oracle Application Server
For larger enterprise configurations, you can refer to the Enterprise Deployment Guide.
Can you give a bit more background on what you are trying to set up? Which scenario, what sort of hardware, software versions, and so on.
Regards,
Pete

Does anyone know if apple's one-to-one program would be a good way to learn how to use logic pro or am I better off going to school to learn audio engineering or something?

Of course going to school would be a good option, but I want to know if one-to-one is also a good way to learn how to use logic pro. Has anyone been through the one-to-one program for logic pro and can say that they learned how to use logic pro well because of it?

For sure, one to one training, if given by a tutor who is capable, will hand you the means to build up self-confidence and will therefore let you operate the hard/software in an intelligent manner, instead of going for the trial and error method which has its pro's and con's too. Once you've passed this beginners phase you will make your own decisions intelligently and then you will also start to get experience and learn even from your mistakes. Something like that in theory and the rest is up to you!
Have a nice day

How to setup a static IP for a wireless printer

This problem has been ongoing for several versions of OS X and the last five printers I've had and I'm finally over messing with it. For some reson, when using a wireless printer with OS X this is a repetetive problem, and I think if I configured the printer to a static IP address instead of using DHCP, it might work better. At least once a week, if not more often, I'll print something and get the ubiquitous Dock error of "Printer is not connected". The printer is still in Preferences, but if I delete it, then it doesn't show up as it should for selection.
The only way to fix this is reboot, and then the printer shows up again in Preferences. I select it and all is well again...until a few days pass and the same thing happens again. Using an HP LaserJet P1102w, still a current model, but it doesn't matter which printer I use. I also have an Epson Artisan 725 and the same thing happens with it about once a week. Also, this happens from both my Mac and my wife's Mac, so it's not an issue with just my machine.
I've searched for documentation on how to setup a static IP address for a wireless printer with the Airport Extreme, but all I find are tutorials on how to do it with an ethernet hard-wired printer. Any help would be greatly appreciated.

You could set up your router to do manual assignment of IP address instead of using DHCP, but that is a PITA, because then you'd have to manually set up IP for all your devices.
If you have AirPOrt Extreme, you could do this:
In your Apple TV, go to the Settings >> About and write down the MAC address of your ATV
Start up the AiPort Admin Utility
Go to Network tab
click + in the DHCP reservations
Choose an IP you want for your ATV & Enter the MAC address
From now on, this IP address will be reserved to the MAC address and only your ATV will be able to get it, no other device will.
It is not a static IP in a true sense, but behaves just like one.
Works great for me...
If you don't have a AP Extreme, I'm sure other routers will allow you do reservations too.

How to setup logical IP/hostname

Similar Messages

Maybe you are looking for