How to show another table's field with LOV??
Hi all!
On my JSP application I'm using an LOV based on 2 tables (datasources). I take the EMP and DEPT tables as an example:
The user can click on the LOV button to select a department for a specific employee. I use the following code for the LOV:
<jbo:DataSource id="dsEmp" appid="am" viewobject="EmpView" />
<jbo:DataSource id="dsDept" appid="am" viewobject="DeptView" />
<jbo:InputSelectLOV datasource="dsEmp" dataitem="DeptId" displaydatasource="dsDept" displaydataitem="Id,Dname" displayvaluedataitem="Id" formname="my_form" />
So, the LOV windows shows the ID and Department Name from the DEPT table and returns Dept.Id into Emp.DeptId. This works fine but in the Edit JSP I want to display the Department Name instead of the Department Number. I don't know how I can pick the Department Name from the DEPT table. I tried to change the displayvaluedataitem="Name" but, as I thought, this didn't work.
Is there any possibility to handle this problem?!
Thanks a lot!
Hi all!
On my JSP application I'm using an LOV based on 2 tables (datasources). I take the EMP and DEPT tables as an example:
The user can click on the LOV button to select a department for a specific employee. I use the following code for the LOV:
<jbo:DataSource id="dsEmp" appid="am" viewobject="EmpView" />
<jbo:DataSource id="dsDept" appid="am" viewobject="DeptView" />
<jbo:InputSelectLOV datasource="dsEmp" dataitem="DeptId" displaydatasource="dsDept" displaydataitem="Id,Dname" displayvaluedataitem="Id" formname="my_form" />
So, the LOV windows shows the ID and Department Name from the DEPT table and returns Dept.Id into Emp.DeptId. This works fine but in the Edit JSP I want to display the Department Name instead of the Department Number. I don't know how I can pick the Department Name from the DEPT table. I tried to change the displayvaluedataitem="Name" but, as I thought, this didn't work.
Is there any possibility to handle this problem?!
Thanks a lot! PS: I'm using JDeveloper9i
Similar Messages
-
How to display another table's field value with an LOV?
Hi all!
On my JSP application I'm using an LOV based on 2 tables (datasources). I take the EMP and DEPT tables as an example:
The user can click on the LOV button to select a department for a specific employee. I use the following code for the LOV:
<jbo:DataSource id="dsEmp" appid="am" viewobject="EmpView" />
<jbo:DataSource id="dsDept" appid="am" viewobject="DeptView" />
<jbo:InputSelectLOV datasource="dsEmp" dataitem="DeptId" displaydatasource="dsDept" displaydataitem="Id,Dname" displayvaluedataitem="Id" formname="my_form" />
So, the LOV windows shows the ID and Department Name from the DEPT table and returns Dept.Id into Emp.DeptId. This works fine but in the Edit JSP I want to display the Department Name instead of the Department Number. I don't know how I can pick the Department Name from the DEPT table. I tried to change the displayvaluedataitem="Name" but, as I thought, this didn't work.
Is there any possibility to handle this problem?!
PS: I'm using Oracle9i JDeveloper.
Thanks a lot!Tim,
See may answer to your other thread:
Re: constant value
Charles. -
How to create Using Formatted Text Field with multiple Sliders?
Hi i found the Java Sun tutorial at http://java.sun.com/docs/books/tutorial/uiswing/components/slider.html very useful, and it tells how to create one Formatted Text Field with a Slider - however i need to create Formatted Text Field for multiple Sliders in one GUI, how do i do this?
my code now is as follows, and the way it is now is scroll first slider is okay but scrolling second slider also changes value of text field of first slider! homework due tomorrow, please kindly help!
// constructor
label1 = new JLabel( "Individuals" );
scroller1 = new JSlider( SwingConstants.HORIZONTAL, 0, 100, 10 );
scroller1.setMajorTickSpacing( 10 );
scroller1.setMinorTickSpacing( 1 );
scroller1.setPaintTicks( true );
scroller1.setPaintLabels( true );
scroller1.addChangeListener(this);
java.text.NumberFormat numberFormat = java.text.NumberFormat.getIntegerInstance();
NumberFormatter formatter = new NumberFormatter(numberFormat);
formatter.setMinimum(new Integer(0));
formatter.setMaximum(new Integer(100));
textField1 = new JFormattedTextField(formatter);
textField1.setValue(new Integer(10)); //FPS_INIT
textField1.setColumns(1); //get some space
textField1.addPropertyChangeListener(this);
//React when the user presses Enter.
textField1.getInputMap().put(KeyStroke.getKeyStroke(KeyEvent.VK_ENTER, 0), "check");
textField1.getActionMap().put("check", new AbstractAction() {
public void actionPerformed(ActionEvent e) {
if (!textField1.isEditValid()) { //The text is invalid.
Toolkit.getDefaultToolkit().beep();
textField1.selectAll();
} else try { //The text is valid,
textField1.commitEdit(); //so use it.
} catch (java.text.ParseException exc) { }
label2 = new JLabel( "Precision" );
scroller2 = new JSlider( SwingConstants.HORIZONTAL, 0, 100, 8 );
scroller2.setMajorTickSpacing( 10 );
scroller2.setMinorTickSpacing( 1 );
scroller2.setPaintTicks( true );
scroller2.setPaintLabels( true );
scroller2.addChangeListener(this);
textField2 = new JFormattedTextField(formatter);
textField2.setValue(new Integer(10)); //FPS_INIT
textField2.setColumns(1); //get some space
textField2.addPropertyChangeListener(this);
//React when the user presses Enter.
textField2.getInputMap().put(KeyStroke.getKeyStroke(KeyEvent.VK_ENTER, 0), "check");
textField2.getActionMap().put("check", new AbstractAction() {
public void actionPerformed(ActionEvent e) {
if (!textField2.isEditValid()) { //The text is invalid.
Toolkit.getDefaultToolkit().beep();
textField2.selectAll();
} else try { //The text is valid,
textField2.commitEdit(); //so use it.
} catch (java.text.ParseException exc) { }
// State Changed
public void stateChanged(ChangeEvent e) {
JSlider source = (JSlider)e.getSource();
int fps = (int)source.getValue();
if (!source.getValueIsAdjusting()) { //done adjusting
if(source==scroller1) {
System.out.println("source ==scoller1\n");
textField1.setValue(new Integer(fps)); //update ftf value
else if(source==scroller2) {
System.out.println("source ==scoller2\n");
textField2.setValue(new Integer(fps)); //update ftf value
} else { //value is adjusting; just set the text
if(source==scroller1) textField1.setText(String.valueOf(fps));
else if(source==scroller2) textField2.setText(String.valueOf(fps));
// Property Change
public void propertyChange(PropertyChangeEvent e) {
if ("value".equals(e.getPropertyName())) {
Number value = (Number)e.getNewValue();
if (scroller1 != null && value != null) {
scroller1.setValue(value.intValue());
else if (scroller2 != null && value != null) {
scroller2.setValue(value.intValue());
// ACTION PERFORMED
public void actionPerformed(ActionEvent event) {
if (!textField1.isEditValid()) { //The text is invalid.
Toolkit.getDefaultToolkit().beep();
textField1.selectAll();
} else try { //The text is valid,
textField1.commitEdit(); //so use it.
} catch (java.text.ParseException exc) { }
if (!textField2.isEditValid()) { //The text is invalid.
Toolkit.getDefaultToolkit().beep();
textField2.selectAll();
} else try { //The text is valid,
textField2.commitEdit(); //so use it.
} catch (java.text.ParseException exc) { }
...if :p3_note_id is null
then
insert into notes (project_id, note, notes_month, notes_year) So, p3_note_id is NULL.
Another option is that you have a trigger on table NOTES that generates a new note_id even for an update. -
How to link VBAP table to field IB SYMBOL
Hello,
How to link VBAP table to field IB SYMBOL
I have checked in transaction SQVI if any relationship exists between the
two tables but there is none
Is there any third table which is common and can be used to link VBAP and
IB SYMBOL
I require this bcz IB SYMBOL contain the charecteristic's of KMAT material
(configurable material ) which need to be printed in the o/p
Is there any other way i can link VBAP to get these characteristc's in the output.
Regards
Harish Madhavan
Edited by: Madhavan Harish on Oct 11, 2010 12:58 PMCheck with your Basis admin if it would be possible to back up and restore the data. They must have something in case of emergency anyway.
Changes in the table fields do not delete the data. I bet someone just used the Database Utility incorrectly and instead of doing the table adjustment with saving the data delete it (there is literally a radio-button for it). Just don't let people do this in Production and you'll be OK.
Also between DEV and PRD you should have another test run in the QA system. If it didn't work well in both DEV and QA I wouldn't ever put this changes in Production, to be honest. -
How to restore a table using RMAN with previous backup ?
Hi everyone,
we have to restore a table from 1 week previous backup using RMAN.
Could you show me how to restore a table using RMAN with previous full backup.
please Help me out.
Thanks
Info > oracle 10g, OS: AIX5LHi,
first of all you must have all the archivelogs since you want to recover your table from the previous backups.
anyways if you want to recover your table then you need to perform incomplete recovery to the point where you loss the table for that you need to restore and recover your database.you likely to loose all the transcation which occurs to the point where you you loose your table.
thanks.. -
How to make a list item field with DATE data type?
I have a column with DATE data type. Using forms 6i I want to generate a poplist list item field with this column while the value of the elements in the list to will be day names like SATURDAY,SUNDAY,MONDAY. if we change the data type from date to char, it will work properly but now with DATE data type behind it, it gives the following error message
"FRM-32082: Invalid value for given item type.
List WEEKREST
Item: WEEKREST
Block: EMPRESTS
Form: MODULE3
FRM-30085: Unable to adjust form for output."
Using forms 6i how to make a list item field with DATE data type which can hold day names?Set your date column as a hidden (non-displayed) field. Create your list item with the varchar2 day names. Create the list item as a non-base-table field that accepts the text values of day names. On that field, create a when-validate-item trigger that translates the text into a real date, which it then uses to set the value of the actual base-table item.
-
How to create labeled table of Content with expand and collapse
Hi All,
Can somebody help me how to create labeled table of Content with expand and collapse as example given below:
User1
Template1
Template2
User2
+
User3
Template1
Template2
Like when we see expand (+) and collapse (-) button when we click on 'about this page' link.
Thanks
BhupendraHi,
Tou can use Table inside table to show the details this way but I'm not sure about Expand/Collapse.
Expand/Collapse are part of HGRID.
I think we can develop this functionality with little manipulation.
Regards,
Reetesh Sharma
Edited by: Reetesh Sharma on Jun 28, 2010 4:56 AM -
How to see the Table Names & Field Names by other than F1 help
Hi Experts
How to see the Table Names & Field Names by other than F1 help, & How to see the List of MM Table Names.
RgdsThe only option to see the active table/ field name is through F1 --> Technical Information. Apart from this, you can use any 3rd part application like GUIex (INbuilt in SAP ECC 6.0 ... can be activated by clicking on the tri-color button on the top right), but you need technical knowledge to understand the information. As far consolidated list of MM tables is concerned, SAP don;t provide you the same at one place, it experience and knowledge which help you in this regard. For your immediate reference MM tables are as under :
EBAN - Purchase Requisition
EBKN - Purchase Requisition Account Assignment
EBUB - Index for Stock Transport Requisitions for Materi
EINA - Purchasing Info Record: General Data
EINE - Purchasing Info Record: Purchasing Organization D
EIPA - Order Price History: Info Record
EKAB - Release Documentation
EKAN - Vendor Address: Purchasing Document
EKBE - History per Purchasing Document
EKBEH - Removed PO History Records
EKBZ - History per Purchasing Document: Delivery Costs
EKBZH - History per Purchasing Document: Delivery Costs
EKEH - Scheduling Agreement Release Documentation
EKEK - Header Data for Scheduling Agreement Releases
EKES - Vendor Confirmations
EKET - Scheduling Agreement Schedule Lines
EKETH - Scheduling Agreement Schedules: History Tables
EKKI - Purchasing Condition Index
EKKN - Account Assignment in Purchasing Document
EKKO - Purchasing Document Header
EKPA - Partner Roles in Purchasing
EKPB - "Material Provided" Item in Purchasing Document
EKPO - Purchasing Document Item
EKPV - Shipping-Specific Data on Stock Tfr. for Purch. D
EKRS - ERS Procedure: Goods (Merchandise) Movements to b
EKUB - Index for Stock Transport Orders for Material
EORD - Purchasing Source List
EQUK - Quota File: Header -
How to show all table fields in correct alv disply
Hi all,
This is my report that disply in ALV . but this is only displying the join table (t_p0001_p0002) fields.i want to disply the other two table fields i.e t_pa0315 and t_pa0007.what is the logic to ALV disply the other two table fields like the table t_pa0001_pa0002.pls help me regarding this.
send me the code its urgent.
thanks!
Vipin
pls find the code below:->
REPORT Y_WP03 .
DEFINE m_fieldcat.
add 1 to ls_fieldcat-col_pos.
ls_fieldcat-fieldname = &1.
ls_fieldcat-ref_tabname = &2.
append ls_fieldcat to lt_fieldcat.
END-OF-DEFINITION.
TYPE-POOLS: slis. " ALV Global types
tables:pa0001,
pa0315,
pa0007,
disvariant.
Selection-Screen
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
*SELECTION-SCREEN SKIP 1.
SELECT-OPTIONS: s_pernr FOR pa0001-pernr. " Personnel No
SELECT-OPTIONS: s_orgeh FOR pa0001-orgeh . " Organization unit
SELECT-OPTIONS: s_werks FOR pa0001-werks. " Personnel Area
SELECT-OPTIONS: s_plans FOR pa0001-plans. " Position
SELECT-OPTIONS: s_ebeln FOR pa0315-ebeln. " Purchase order
SELECTION-SCREEN END OF BLOCK blk1.
SELECTION-SCREEN BEGIN OF BLOCK b2k2 WITH FRAME TITLE text-002.
*SELECT-OPTIONS: s_var FOR disvariant-variant.
PARAMETERS: p_disva1 LIKE disvariant-variant.
SELECTION-SCREEN END OF BLOCK b2k2.
Type Definition *
TYPES :
BEGIN OF ty_pa0001_pa0002,
pernr TYPE pa0001-pernr , " Personnel no.
endda TYPE pa0001-endda , " end date
begda TYPE pa0001-begda , " start date
bukrs TYPE pa0001-bukrs , " company code
werks TYPE pa0001-werks , " Personnnel area
persg TYPE pa0001-persg , " Employee group
persk TYPE pa0001-persk , " Employee subgroup
btrtl TYPE pa0001-btrtl , " Personnnel subarea
abkrs TYPE pa0001-abkrs , " Payroll area
kostl TYPE pa0001-kostl , " cost center
orgeh TYPE pa0001-orgeh , " Organizational Unit
plans TYPE pa0001-plans , " Position
nachn TYPE pa0002-nachn , " Last name
vorna TYPE pa0002-vorna , " First name
midnm TYPE pa0002-midnm , " Middle name
END OF ty_pa0001_pa0002 ,
BEGIN OF ty_pa0315,
pernr TYPE pa0315-pernr , " Personnel no.
kostl TYPE pa0315-kostl , " Sending cost center
lstar TYPE pa0315-lstar , " Activity type
werks TYPE pa0315-werks , " Plant
lifnr TYPE pa0315-lifnr , " Vendor number
ebeln TYPE pa0315-ebeln , " Sending pruchase ord
ebelp TYPE pa0315-ebelp , " Sending PO item
lstnr TYPE pa0315-lstnr , " Activity number
END OF ty_pa0315,
BEGIN OF ty_pa0007,
pernr TYPE pa0007-pernr,
schkz TYPE pa0007-schkz,
END OF ty_pa0007.
*BEGIN OF ty_pa0002,
pernr TYPE pa0002-pernr,
nachn TYPE pa0002-nachn,
vorna TYPE pa0002-vorna,
midnm TYPE pa0002-midnm,
*END OF ty_pa0002.
Data Declaration *
DATA :
t_pa0001_pa0002 TYPE STANDARD TABLE OF ty_pa0001_pa0002 ,
w_pa0001_pa0002 TYPE ty_pa0001_pa0002 ,
t_pa0315 TYPE STANDARD TABLE OF ty_pa0315 ,
w_pa0315 TYPE ty_pa0315 ,
t_pa0007 TYPE STANDARD TABLE OF ty_pa0007 ,
w_pa0007 TYPE ty_pa0007 .
t_pa0002 TYPE STANDARD TABLE OF ty_pa0002 ,
w_pa0002 TYPE ty_pa0002 .
START-OF-SELECTION .
SELECT a~pernr
a~endda
a~begda
a~bukrs
a~werks
a~persg
a~persk
a~btrtl
a~abkrs
a~kostl
a~orgeh
a~plans
b~nachn
b~vorna
b~midnm
INTO TABLE t_pa0001_pa0002
FROM pa0001 AS a INNER JOIN pa0002 AS b
ON apernr = bpernr
WHERE a~pernr IN s_pernr
AND a~werks IN s_werks
AND a~orgeh IN s_orgeh
AND a~plans IN s_plans.
SORT t_pa0001_pa0002 BY pernr .
IF NOT t_pa0001_pa0002[] IS INITIAL .
SELECT pernr
kostl
lstar
werks
lifnr
ebeln
ebelp
lstnr
FROM pa0315
INTO TABLE t_pa0315
FOR ALL ENTRIES IN t_pa0001_pa0002
WHERE pernr = t_pa0001_pa0002-pernr
AND kostl = t_pa0001_pa0002-kostl
AND ebeln IN s_ebeln.
SELECT pernr
schkz
FROM pa0007
INTO TABLE t_pa0007
FOR ALL ENTRIES IN t_pa0001_pa0002
WHERE pernr = t_pa0001_pa0002-pernr.
SELECT pernr
nachn
vorna
midnm
FROM pa0002
INTO TABLE t_pa0002
FOR ALL ENTRIES IN t_pa0001
WHERE pernr = t_pa0001-pernr .
ENDIF.
PERFORM f_display_data.
FORM f_display_data.
DATA:
ls_fieldcat TYPE slis_fieldcat_alv,
lt_fieldcat TYPE slis_t_fieldcat_alv.
Build the field catalog
m_fieldcat 'PERNR' 'PA0001'.
m_fieldcat 'NACHN' 'PA0002'.
m_fieldcat 'VORNA' 'PA0002'.
m_fieldcat 'MIDNM' 'PA0002'.
m_fieldcat 'BUKRS' 'PA0001'.
m_fieldcat 'WERKS' 'PA0001'.
m_fieldcat 'PERSG' 'PA0001'.
m_fieldcat 'PERSK' 'PA0001'.
m_fieldcat 'BTRTL' 'PA0001'.
m_fieldcat 'ABKRS' 'PA0001'.
m_fieldcat 'ORGEH' 'PA0001'.
m_fieldcat 'PLANS' 'PA0001'.
m_fieldcat 'SCHKZ' 'PA0007'.
m_fieldcat 'KOSTL' 'PA0315'.
m_fieldcat 'LSTAR' 'PA0315'.
m_fieldcat 'WERKS' 'PA0315'.
m_fieldcat 'LIFNR' 'PA0315'.
m_fieldcat 'EBELN' 'PA0315'.
m_fieldcat 'EBELP' 'PA0315'.
m_fieldcat 'LSTNR' 'PA0315'.
m_fieldcat 'BEGDA' 'PA0001'.
m_fieldcat 'ENDDA' 'PA0001'.
Display the list
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-cprog
i_callback_user_command = 'USER_COMMAND'
it_fieldcat = lt_fieldcat
TABLES
t_outtab = t_pa0001_pa0002.
ENDFORM. " F_DISPLAY_DATA_VBAK
FORM USER_COMMAND *
FORM user_command USING u_ucomm TYPE syucomm
us_selfield TYPE slis_selfield. "#EC CALLED
CASE u_ucomm.
WHEN '&IC1'.
READ TABLE t_pa0001_pa0002 INDEX us_selfield-tabindex INTO
w_pa0001_pa0002.
CHECK sy-subrc EQ 0.
ENDCASE.
ENDFORM. " USER_COMMANDHey,
Look at ur code.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-cprog
i_callback_user_command = 'USER_COMMAND'
it_fieldcat = lt_fieldcat
TABLES
t_outtab = <b>t_pa0001_pa0002</b>.
Here you're passing only the join table t_pa0001_pa0002. If you want to display the other tables as well, then u must have an internal table that has the columns of all the 3 tables. Then u need to buil;d the fieldcatalog accordingly and then display that table,
Cheers,
Sam -
How to populate a hidden form field with a value passed from another page
I'm using PHP/MySQL and DW CS4.
I am trying to obtain the external key for a table, and include it as a hidden field in a form for a second table.
The user selects a "need" from a list and is taken to a new page which displays the need selected in the prior page and a form the user can fill out with details of his offer, there should also be a hidden field in this form that contains the index to the needs table, this hidden field holds the external key. Most of the code is working, except for populating the hidden field with the external key. I have proven(by printing it to the screen) that I have obtained the external key and stored it in a variable ($saveNeedId) . What I'm unable to do is assign this variable to the hidden field in the form I'm about to store in a table. Sometimes I get zero and sometimes I get the index to the first need in the table. This ought to be simple but I can't get it to work, I must be missing something obvious - still very new to PHP.
Here's the code that sets up the variable and prints it to the screen for test purposes
$saveNeedId = "-1";
if (isset($_GET['needId'])) {
$saveNeedId = $_GET['needId'];
print $saveNeedId;
Here's the code that sets up the hidden fields in the form, the one I'm trying to set up is the first one, needId
<input type="hidden" name="needId" value="<?php echo $row_rsNeedsUnmet['needId']; ?>" />
<input type="hidden" name="offerId" value="" />
<input type="hidden" name="MM_insert" value="form1" />
The page where the user sees the list of needs is here www.hollisterairshow.com/weneed.php
I'd really appreciate sone help with this, I've tried all combinations of double quotes, percent signs and nothing works...sigh.
TonyHere's the code that sets up the variable and prints it to the screen for test purposes
$saveNeedId = "-1";
if (isset($_GET['needId'])) {
$saveNeedId = $_GET['needId'];
print $saveNeedId;
Here's the code that sets up the hidden fields in the form, the one I'm trying to set up is the first one, needId
<input type="hidden" name="needId" value="<?php echo $row_rsNeedsUnmet['needId']; ?>" />
<input type="hidden" name="offerId" value="" />
<input type="hidden" name="MM_insert" value="form1" />
<input type="hidden" name="needId" value="<?php echo $_GET['needId']; ?>" />
I looked at your page. It looks like you figured it out. -
How to create another table with an exisiting table
Hi,
I want to create another table on the top of an existing table, my existing table has few constraints and checks, i want to create another table which should copy all checks and constraints from existing table.
for example;
<p>
create table temp
</p>
<p>
(idx number primary key,
</p>
<p>
publish varchar2(250) not null,
</p>
<p>
address varchar2(250) not null,
</p>
<p>
rent number check (rent >=0))
--<strong>Required output</strong>
</p>
<p>
create table temp1
</p>
<p>
as select * from temp
</p>
<p>
where 1=2
the structure of the table received as an output has the following structure:
</p>
<p>
CREATE TABLE TEMP1
</p>
<p>
</p>
<p>
IDX NUMBER,
</p>
<p>
PUBLISH VARCHAR2(250 BYTE) NOT NULL,
</p>
<p>
ADDRESS VARCHAR2(250 BYTE) NOT NULL,
</p>
<p>
RENT NUMBER
</p>
<p>
</p>
<p>
where i could not find primary key and check constraint but i can see not null check. Is there anyway that i could get the all checks when i create another table on the top of an existing table.
</p>
Best Regards,A CTAS (CREATE TABLE AS SELECT ...) probably isn't what you're looking for since that doesn't handle constraints.
Depending on the Oracle version, you can probably use the DBMS_METADATA package to get the DDL for the table and then modify the DDL to create the copy, i.e.
1* select dbms_metadata.get_ddl( 'TABLE', 'TEMP' ) from dual
SQL> /
DBMS_METADATA.GET_DDL('TABLE','TEMP')
CREATE TABLE "SCOTT"."TEMP"
( "IDX" NUMBER,
"PUBLISH" VARCHAR2(250) NOT NULL ENABLE,
"ADDRESS" VARCHAR2(250) NOT NULL ENABLE,
"RENT" NUMBER,
CHECK (rent >=0) ENABLE,
PRIMARY KEY ("IDX")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ENABLE
) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS"You'd then just need to replace the "TEMP" with "TEMP1".
Justin -
How to show a table in Excel as it is.. in Siena? PLZZ ANSWER!
My Excel sheet has a table named 'Compliance' with 5 columns....'S. No.' , 'Specifications', ....(so on).... , 'Remarks' and data entered in rows.
Now.. I want to show this table as it is in my Siena App. How do I do this??
Also.. I want to add another column(6th) in the app which contains checkboxes ...such that I can Check some of the rows (from Compliance table in app) I want, and add them to a separate Collection that can be viewed on another screen.
Please Help!!!!Just a quick example if needed.
Create a Custom Gallery (Visuals < Galleries < Custom Gallery (choose the one on the right).
Move the Gallery to wherever you want it on the page.
Change the following:
Design < Template Size: 40
Design < Template Padding: 5
Data < Items: Compliance
Assuming you selected the Custom Gallery on thr right, Template Size refers to the height of the Template, I just used 40 as a quick example.
The Temnplate Padding refers to the empty space between each template, and the space between the templates and the Gallery.
Click inside the top template on the Gallery:
Add a Label: Visuals < Label
Set its Text to 'S. No.'
Data < Text: ThisItem!'S. No.'
Assuming you clicked inside the top template in the Gallery, you will see the lable repeated in each of the templates below it. If it didn't, delete it, then re click inside the template, ad add it.
Adjust the width of the label to the widest useage expected, as it will not grow automatically.
Add another Label: Visuals < Label
Set its Text to Specifications
Data < Text: ThisItem!Specifications
Notice the difference between the two data sources. Since S. No contains a space, you have to put a set of ' around it. The other does not have a space, so it soesn't use the '
Drag the Label to the right of the first label.
Repeat for the remaining fields.
After all of the fields are in the Gallery, add a CheckBox:
Visuals < CheckBox
Change the text next to the TextBox with its Text property.
To use the CheckBox to Collect that specific record to Collection2, use:
Behavior < OnChecked: Collect(Collection2, ThisItem)
It is usually usefull to also remove the item if UnChecked:
Behavior < OnUnChecked: Remove(Collection2, ThisItem)
-Bruton -
How to create Check table for Field Maktx
Hi Experts,
I am create one ztable with fields Mandt, Matnr, Maktx, Type1 and Type2 etc.
I need a create a check table for field MAKTX.
If i give material number the its the material description also.
Thanks in Advance,
Purnaneelu.Hi,
Actually i am create one ZTable with fields Mandt ,matnr, maktx, type1,type2 and type3
Now i am entry the data for matnr,type1,type2 and type3 .
Now i am going to TCode SE16n material is not appears, but the requirement is shows the description also
STOP USING I AM in each and every sentence...and try to correct your english...so that people can understand your problem easily.
Hope this suggestion will help you going forward at the time of posting your question at SDN.
Wram regards,
Abhishek -
How to show original table in table format from Power Pivot?
Hi
I am using Excel 2013 Power Pivot to import data from LOB SQL database. I have Sales table as follow.
The table is loaded into Power Pivot data model to produce various reports and charts. One of the report is to show the table as it is with selected columns. The business also want using Slicers to view a sub set of the rows in the table.
Is there anyway in Excel to show the tables with selected columns from the Power Pivot date model table without Power View?
Regards
Joe Lee
jlthe simplest thing would be to use a pivot table and set its layout to Tabular Form
1) select your Pivot Table
2) go to Design --> Report Layout --> Show in Tabular Form
4) set Design --> Report Layout --> Repeat All Item Labels to true
3) add the necessary fields to the Rows-section of your pivot table
4) remove all subtotals
5) connect the existing slicers to your Pivot Table
hth,
gerhard
Gerhard Brueckl
blogging @ http://blog.gbrueckl.at
working @ http://www.pmOne.com -
Selection Screen - How to populate more than 1 field with help input
Hello all,
I have a selection screen in which 4 fields are defined.
Help input is available for the first field. On selecting the entry in the popup, I would like the 4 fields to be populated with the corresponding values.
Try transaction CV01 for a sample of what I want:
Selecting from the popup will populate all 4 fields.
Thanks in advance,
Alain Cyr.Please see the following program, it should show you exactly what you need to do.
report zrich_0002 .
parameters: p_bukrs type t001-bukrs,
p_butxt type t001-butxt,
p_ort01 type t001-ort01,
p_land1 type t001-land1.
data: dynfields type table of dynpread with header line.
data: return type table of ddshretval with header line.
at selection-screen on value-request for p_bukrs.
call function 'F4IF_FIELD_VALUE_REQUEST'
exporting
tabname = 'T001'
fieldname = 'BUKRS'
dynpprog = sy-cprog
dynpnr = sy-dynnr
dynprofield = 'P_BUKRS'
tables
return_tab = return
exceptions
field_not_found = 1
no_help_for_field = 2
inconsistent_help = 3
no_values_found = 4
others = 5.
read table return with key fieldname = 'P_BUKRS'.
* Add it back to the dynpro.
dynfields-fieldname = return-retfield.
dynfields-fieldvalue = return-fieldval.
append dynfields.
* Get the company code from db and add to dynpro
data: xt001 type t001.
clear xt001.
select single * into xt001
from t001
where bukrs = return-fieldval.
dynfields-fieldname = 'P_BUTXT'.
dynfields-fieldvalue = xt001-butxt.
append dynfields.
dynfields-fieldname = 'P_ORT01'.
dynfields-fieldvalue = xt001-ort01.
append dynfields.
dynfields-fieldname = 'P_LAND1'.
dynfields-fieldvalue = xt001-land1.
append dynfields.
* Update the dynpro values.
call function 'DYNP_VALUES_UPDATE'
exporting
dyname = sy-cprog
dynumb = sy-dynnr
tables
dynpfields = dynfields
exceptions
others = 8.
start-of-selection.
Welcome to SDN! Please remember to award points for helpful answers and mark you post as solved when solved completely. Thanks.
Regards,
Rich Heilman
Maybe you are looking for
-
URGENT check the code for vendor ageing (Give Solution)
hi this is the code which i am using to calculate the ageing but not able to get the result. every time the result is 0.plz suggest me the solution. its very urgent. *& Report Z_VENDOR AGEING * *&
-
Intercompany sales and stock transfer enhancement at billing level
Dear Gurus , Business requirement is to process intercompany sales and stock transfer for both divisions PB & RB, but in standard SAP we can assign only one division in the configuration. So need development to determine division on the basis of mate
-
Purchase group creation in EBP
Hi, i got a requiremenet to create purchasing group in R/3 and EBP. How to cretae purchasing group in EBP,whether we have to replicate it from R/3 or we ahve to create directly in EBP. Please guide me how to create or replicate. Thank you.
-
How to submit bugs for FlexCPD?
Hello, Where should I submit bugs related to FlexCPD? Should we use the FlexPMD project in JIRA and if so then which component? The problem I have is that when FlexCPD detects similar snippets in MXML files it reports wrong lines. I have several such
-
Imessage for mac wont send or recieve images/video
Ever since my upgrade to OSX Mountain Lion imessage for mac will not send/recieve images or video. Iphone4 and Ipad are sending/ recieving fine. Any suggestions?