How to show icons startup manager

Hi !
I'm gooing to try a multi boot hard drive. There is a Mac OS X 10.5 boot, a Mac OS X 10.6 boot, a Mac OS X 10.7 boot and an OS X 10.8 boot.
For 10.5 and 10.6 Boot the volumes icons are showed, but not for 10.7 and 10.8.
I have just do apple-c / apple-v to the information window volume.
Have you a solution for this issue ?
Thanks

When you start the computer holding down the 'option' key you should see all bootable drives, but I'm not sure about having so many different OSs on the same system. Might confuse the startup manager.
Remember that there will be at least two partitions for each of 10.7 and 10.8 (if they both have their own recovery partition), plus possibly one or more efi partition. The maximum number of partitions is 7, so its possible that you've exceeded this. To find out, open Terminal and type
diskutil list
which will list all mounted and unmounted partitions.
If that's not it, Try using rEFIt - that works well with incompatible EFI boot files (like mixing windows, linux and OS X).

Similar Messages

HT1948 USB drive with install image is showing in Startup Manager on a Mac Pro, but wont boot. Showing circle with cross strip, and shut down automatically. USB device are made and work on two different MacBook Pro, but used on Mac Pro. Any help?

USB drive with install image is showing in Startup Manager on a Mac Pro, but wont boot. Showing circle with cross strip, and shut down automatically. USB device are made and work on two different MacBook Pro, but used on Mac Pro. Any help?

OS X installers have always been fairly specific, hardware-wise. I haven't read anything reflecting that situation with the Recovery HD, so it may be that the Recovery HD created for the MacBook Pro does not have the necessary drivers for the Mac Pro. Obviously, nothing definitive here, but a possibility.

Why doesn't the Recovery HD icon show in Startup Manager?

Just wondering if this is a concern and as to why it wouldn't show when I go into Startup Manager? Only option showing is my main drive or any plugged in. I can get to the recovery w the command+R method and it shows in terminal that the recovery hd partition is there. So why not show in the Startup Manager? Please help!

Change
contentPane.add(textArea); // add the thing into the frameto
contentPane.add(scrollPane)and it should appear
Looking at your code you set the GridBagLayout manager to the ContentPane. You add the text area to the scrollpane and then try and specify the constraint of the textarea on the content pane, but its in the scrollpane. So you may want to change that too
Note that:
import java.io.*;
will import any classes required in the * directory meaning that you don't need the following line.
import java.io.IOException;
The same goes for
java.awt.*;
java.awt.event.*;
The java.lang package is imported as standard so you don't need to declare and import of this.

Do any developers know please?, how can i get 'startup manager' to load without option key or reFit app?

Hello members (OS X developers)
Basically, as the subject title says it all really, i'd like to get my (intel) Macbook to boot into 'Startup Manager' without holding the option key, or, without using any third party software like 'reFIT', is there a way to alter some kind of OS X (sl) startup script.
I've posted this here, as i recon a 'developer' who knows the inner workings of OS X, and may have a clever way to do this.
Any help would be great.
kind regards
Livio

Slow, intermittent. Sometimes bootable sometime not. Odd behavior.
Sounds to me like a classic case of your HD failing.
Your SMART status may still show verified, with no errors on the Apple Hardware Test, Disk Utility shows no problems on Disk Repair- this is of no help.
I trust you have a good back-up and a bootable clone.
http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/

XP partition does not show in startup manager

When I boot into the startup manager (hold down alt-key during boot) the XP partition does not show as boot drive. I can boot into XP only through the startup-drive preference pane. This problem is still present after the update to 10.5.2. Any solution besides reformating the drive? Thanks!

Hi Gulliver,
have a look at rEFIt http://refit.sourceforge.net/ as a Boot-Manager alternative.
BTW: 'Small in a big world or Big in a small world' ?
Stefan

How to show icon image on Unix

I the Button Icons are fine on NT machines. When I move the application to a Unix machine, the icons won't show up. How do I set up to let them show up? Any suggestion? Thanks.
-- [email protected]

Hello,
This plugin Does Exactly What You Need.
http://www.apex-plugin.com/oracle-apex-plugins/item-plugin/extension-warp11-gmaps-item_109.html
Please read the comments on the plugin, in case you come across problem in running the plugin....
Best Regards,
Fateh
If you believe that my answer was correct, then please mark the answer as correct. This is for the best of all

How to show icon when draggin

HI m
my requirement is to show the icon of the dragging component's icon(currently jlabel with gif as icon )during drag and drop operations
how to achieve this objective, as DnD api donot suppurt this thing
[email protected]

I normally use a calculated attribute inside the table's data source node for this.
Add an attribute "Icon", type=string, calculated=true, read-only=true, under the data source node.
(If the data source node uses structure binding and does not allow to add an attribute, add a helper value node instead, cardinality=1:1, selection=1:1, and add the attribute to this node.)
In the get-method for the calculated attribute, you get the node element corresponding to the table row as parameter. Depending on other attributes in this node element, select an icon URL and return it.
If you put your icons inside the src/mimes/<component> folder, you can simply return the file name of the icon.
Don't use a Button as table cell editor but rather an Image or LinkToAction.
Armin

How to show icon in a column of a table?

How to display an icon in a column of a table UI element and this icon is to be displayed based on values in the table row?

I normally use a calculated attribute inside the table's data source node for this.
Add an attribute "Icon", type=string, calculated=true, read-only=true, under the data source node.
(If the data source node uses structure binding and does not allow to add an attribute, add a helper value node instead, cardinality=1:1, selection=1:1, and add the attribute to this node.)
In the get-method for the calculated attribute, you get the node element corresponding to the table row as parameter. Depending on other attributes in this node element, select an icon URL and return it.
If you put your icons inside the src/mimes/<component> folder, you can simply return the file name of the icon.
Don't use a Button as table cell editor but rather an Image or LinkToAction.
Armin

How to show icons in ALV grid ...

Hi guyz ,
A lill query ....
In an ALV gird ,if i need to display icons in one of the columns , say i have
a field called Status , where i need show some icons like green , yellow and
red circles , depending on some other fileds say invoice reciept date .
So can i get icons in ALV colums.
Please advise .
Thanks
Jahan

This is very easy. IN your status field in your internal table, you simply write the icon to it. Make sure that the status field is defined as a character field with a length of 4. Then write the icon to it.
Type-pools: icon.
write icon_green_light as icon to itab-status.
Then when filling the field catalog, set the ICON flag. This puts the icon in the center of the cell in ALV.
xfc-icon = 'X'.
append xfc to ifc.
Regards,
Rich Heilman

How to show icons on a new page or tab? like in chrome or IE 9?

Im a new firefox user, and I would like to have icons of the webpages I visit often whenever I open a new tab. Is this possible in Firefox? and how to do so?

Middle-click or {Ctrl + click} a link to have it open in a new tab.
Or, right-click the link and select '''Open Link in a New Window''' (or New Tab).
Window size isn't going to change when opening a link, if you want it Maximized, that is a separate click if the original window isn't already Maximized.
Full Screen is window by window, and is toggled by '''F11'''.

How to show icons in Kanban Board User-exit1 field ?

Hello everybody !
I need to fill the field "User-exit1" of Kanban Board with an icon (green, yellow or a red light), but I noticed that this field accepts only text..... How can I do that ??
Thanks a lot !
Mauro.
Edited by: Mauro Ivo Nass on Oct 14, 2011 1:16 PM

The reason it's not converting it to an icon is because the data element is using TEXT data type which is preserves the case (lower/upper case) of the string entered and is seen only as text and no conversion can happen (please double click on TEXT60 to investigate further). It's like the difference between MAKTX and MAKTG in the table MAKT
Since you cannot change SAP standard data elements because they may be used in other programs also. You need to add a field to the structure with data element that uses CHAR data type which can use conversion exits to display the icons.
Edited by: Jeevan Sagar on Oct 18, 2011 12:13 PM
EDIT: I just tested by changing the material description of a material as @5B@ and in display mode (MM03) and in table MAKT (SE16N) it's display the green LED. So data type should not be the problem.
Are you trying to display it on the SAP screen or on browser/ third party software?
Edited by: Jeevan Sagar on Oct 18, 2011 12:21 PM

Anyone know how to show icon of a button in webforms?

My form have several buttons with an icon.
I create a item named 'UI_ICON' and set the value the directory of icon path. But when I deplop the form on the webserver or run the from IE 5.0. There are are no image shown.
BTW: I have converted the image format from .icon to .gif.
Anyone can help me?
Thanks a ton.

To specify directory path and image format for iconic button image files:
1.Open the Registry.dat file in a text editor.
2.Add the following lines to Registry.dat:
<app_class>.icons.iconpath=<path>
<app_class>.icons.iconextension=<format>
Replace <app_class> with a valid application class referenced by your Web
application.
Replace <path> with one of the following:
a fully-qualified URL that points to any directory on any server:
inv_form.icons.iconpath=http://abc_dev.com/html/icons/
a virtual directory on the same server from which the HTML page
downloaded:
inv_form.icons.iconpath=/icons/
a directory relative to the directory from which the HTML page was
downloaded
(non-cartridge implementations only):
inv_form.icons.iconpath=icons/
Replace <format> with gif (for GIF files) or jpg (for JPEG files). For
example:
inv_form.icons.iconextension=gif
Default Settings:
If you do not specify a directory path or image format for an application
class, Forms uses the default settings in the Registry.dat file:
default.icons.iconpath=
default.icons.iconextension=gif
Solution Explanation:
=====================
Application classes enable you to specify the directory path and image format
(GIF or JPEG) of image files for iconic buttons.
Using application classes is optional, since Forms supplies default settings
for the icon path. Use application classes if you wish to create a number of
different settings that you can alternate between by switching a single
reference in your application's cartridge settings, cartridge HTML file, or
static HTML file.
At runtime, Forms first looks for settings that correspond to the specified
application class (if any). If no application class settings exist, Forms uses
default settings. By default, Forms will search for iconic button image files
in the directory from which the application's HTML file was downloaded, and
will append ".gif" to the filename provided in your form. By default Forms
will only search for .GIF images, but you can switch to using .JPEG images in
the Registry.dat file.
To create settings for an application class, you must add the appropriate
settings to the Registry.dat file.
Regards
Grant Ronald
Forms Product Management

Startup Manager is not working

The startup manager doesn't boot when I start the computer while holding the option key. Even if there are no other volumes connected, it still doesn't show the startup manager screen (just main startup disk and recovery).
I recently just reinstalled the OS via recovery mode (other unrelated problem, no biggie). I made a bootable clone with Carbon Copy Cloner, to a bare harddrive of same capacity via a FW800 dock. Booting with the clone via System Preferences isn't a problem. But the Start + Option route doesn't work.
I'm thinking it's the graphics card that I have, a GTX 680 (not flashed for Mac). Because the card hasn't been flashed I don't get the gray screen with Apple logo screen, it goes straight to the Login Page. Not a problem for me, but maybe this is the reason?
Specs:
Mac Pro 5,1 2.4 GHz 12 core
GTX 680 - latest Nvidia Web Driver and CUDA Driver
10.8.5 - all updated
Thanks

Try downloading the HP Support Assistant and running it. It should be able to detect any missing drivers for you.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Prev "previewed" files in 10.6 dont scale via "show icon preview" function

1. use DropIcon 3.0.2 under a lower version of OSX than 10.6
2. import your "preview built" files into 10.6 (notice also that files that have a preview built into them are larger in file size than the same file which doesnt have it)
3. scale a folder full of images to for example - 180 px squared
4. notice that 10.6 cant build a new preview based on the new size
how to "show icon preview" files which have been previously "preview built" by apps like DropIcon 3.0.2 ?
This would be very useful....
TIA

You may not think of icons as 512x512, but Apple now does. The transition started in Leopard, and is now complete--pretty much all of Apple's icons will now go to 512pixels in the various and sundry places they are displayed, from window views for Icon, CoverFlow, and the preview pane of Column view, to the GetInfo preview, to Spotlight results displayed in icon view.
As to your own custom thumbnails: if, as mentioned previously, you used Photoshop with the option to save a custom thumbnail, or you used a dedicated program to save a custom thumbnail for an image file, then those custom thumbnails were added to the image file as a resource fork. WAY back such custom thumbnails were 32x32 pixels. In the more recent past they were 128x128. Indeed, that is still the size used by Photoshop when it adds a custom thumb.
If the Finder is displaying any view that shows a preview of the file it will either display the custom thumb that is part of the file, if one is present, or draw its own preview if no custom thumb is embedded in the file. And if it uses the custom thumbs they will NOT scale upwards in any pretty way, beyond whatever their original size was--they'll just get pixalated. The advantage, if you don't need to be able to scale up to 512, is that the display of a folder full of images with custom thumbs is instantaneous, while a folder full of images without custom thumbs may take a noticeable amount of time for all of the previews to be drawn (you can see them appearing as you scroll the folder). The disadvantage to custom thumbs, as you have discovered, is that they don't scale well. If you want to be able to scale the preview thumbnails in various Finder views, you need to remove the custom thumbnails you have added, either via the save option in Photoshop, or with your third party program. You can't tell Finder to ignore them: if they are present Finder assumes you want it to use them, rather than its own preview function.
Francine
Francine
Schwieder

No boot discs in Startup Manager

Hello all.
I just purchased a used PowerMac G4 Quicksilver 2002 from CL for $100. It is a 1GHz DP with 1.5GB of memory. The girl who sold it to me just removed the hard drive, but said everything was working fine for her. She just wanted an upgrade.
My intended purpose for this computer was to be a file server for my home business. So, I bought 2 1TB SATA disks and a SATA controller. The SATA controller won't work with Mac, so I ordered a new one which is on its way. In the meantime, I put an old 40GB IDE hd in on which to install the OS.
The problem is that it won't boot from CD (holding c at startup), rather it just shows the question mark folder. Fine, I thought; I'll just see what my boot options are (holding option for the startup manager). This shows nothing. Only a refresh button, and a right arrow. No drives.
I then reset the PRAM, which did nothing.
I then booted in target mode through my MacBook, and installed OSX on the G4 hard drive using a Leopard retail disk. I tried booting again, and there is still nothing showing in Startup Manager.
Any ideas?
Thanks.

Hi, thanks for the response!
Ok, so let me get this straight.. you are using an older 40GB drive to install a mac os operating system and the cd won't recognize it on boot up?
Well yes. The QS shows a question mark on boot, so I tried to install OSX using a retail DVD of Leopard.
Also, some cd drives are not compatible with the boot feature of the mac, so be sure that the cd or dvd drive that is in the G4 will recognize mac formatted dvd's and cd's.
AFAIK it is the standard DVD drive that came with the machine, so I would assume it is compatible.
Its quite possible that the cd or dvd drive doesn't support the higher format of Leopard(double data - 9.5GB)?
Well, I'm guessing you mean the cd drive again? In which case, I addressed that above. Please let me know if that's what you are referring to here.
Did you try a retail tiger dvd to see if the Quicksilver 2002 will accept it?
I haven't tried Tiger, but I did try to boot from several Linux CDs (not DVDs) that I know for sure are bootable. No luck. It just doesn't see any of them.
Or it could be that you are trying to install from a grey disk set(a set from another system)
Nope. Just used a retail Leopard DVD, and tried several Linux CDs.
Thanks so much for the reply.

How to show icons startup manager

Similar Messages

Maybe you are looking for