How to show inboxs for multiple users?

I recently have started using the Mail App on my iMac. I was using my company's OWA as my standard mail program but I found the Mac mail easier to use. But... In my OWA it was possible for me to have multiple accounts and inboxs from the same server (exchange 2007) and after I had set up my mac mail with my primary exchange account, I couldn't send or recieve from my other accounts. Then I saw that I could type in more e-mail addresses in the Account setup and now it is possible for me to send fromthese accounts.
But still.. I can't see the incoming mails for these accounts. Anybody who knows how to setup mac mail app so I can see the incoming mails for ohter users than my primary?

I've found the same problem in OS X Lion, with Mail, iCal and Address Book getting confused when two Exchange accounts on the same server are configured, resulting in either missing or duplicate entries (despite everything appearing fine when accessing the accounts individually via Outlook or OWA).  iOS doesn't have any problem with this setup; two Exchange accounts on the same server work perfectly; the issue seems specific to Mac OS X.
After some experimentation I've found a workaround.  Since the issue crops up with two Exchange accounts on the same server, it seems possible to trick OS X into thinking the accounts are on two separate servers through a little DNS manipulation (which I realize may not be a practical option for everyone).  Here's what resolved the issue for me:
My external and internal DNS FQDNs for the mail server were mail.mydomain.com.
I set up a new DNS entry - mail2.mydomain.com - as a CNAME for mail.mydomain.com.
On my Mac, I set up Exchange account #1 with the server set to mail.mydomain.com.
I then set up Exchange account #2 with the server set to mail2.mydomain.com.
Even though both FQDNs resolve to the same IP, this seems sufficient for Mac OS X to consider them as separate servers, elliminating the problems I had before when I set both Exchange accounts to the same mail server FQDN.
I've only tried this on OS X 10.7 Lion, and the recent 10.7.1 update, although I wouldn't be surprised if the same trick works for earlier versions of OS X.

Similar Messages

  • How to restrict login for multiple users having same Role

    Our Web Application is deployed on Tomcat 5.5
    The requirement is ?
    There are roles in application like "operator", "admin"?
    There are multiple users created for each of the above role.
    When one user of "operator" role is logged in, then
    It should not allow to login for another user of "operator" role.
    Also, if user did not log out & application gets close, then
    It should not allow to login for another user of "operator" role.
    Also, it should not allow to login for multiple requests of same user
    (using another browser instance...)
    Is it possible using session object?
    But, using session object, it will create separate objects for different users,
    So here I will not be able to restrict session object creation rolewise.
    Also, how to retrieve these multiple session objects created for different users on server?
    If anyone is having the solution please reply as soon as possible,
    Thank you.

    To tell you the truth, this is a stupid requirement. It must be an extremely fragile application.
    In any case, you will have to write your stuff for that. Probably a filter that on login, logout, and session expiration checks, makes, or removes entries in a DB (using a synchronized resource to prevent race conditions) or possibly even simply in an application context object.

  • How to use Keychain for multiple users on one computer?

    I have a new Macbook Pro with Yosemite.  I just moved over from PC for my work computer and the Keychain thing is killing me!  I am a social media consultant so I manage multiple accounts for multiple clients.  I need a way to log in and out as them on many different platforms.  The reality is that I am the only user but I log in and out of different things as if this was a public computer with multiple users. 
    PC allowed me a drop-down option with each login.  For example the email box could be clicked and then I could select the client email that I needed to fill in.  The password would then auto-populate.  Is there any setting I can change to make this happen on a Macbook? I have been logging in, deleting the info in Keychain, then logging in for the next client, delete...etc.
    Most password managers don't work because of this same problem.  Please don't recommend a password manager app unless it can handle logging in and out of (for example)10 different LinkedIn profiles.
    Any advice would be greatly appreciated!

    Tanja Turtsanyi wrote:
    I have a new Macbook Pro with Yosemite.
    Apple>About This Mac>More Info>Service
    Please read the warranty paperwork that came w/your computer.
    You have 14 days to return the computer w/no questions asked. 
    You have 90 days of FREE phone tech support on top of your standard 1 year warranty unless you also purchased AppleCare which gives you an additional 2 years of coverage plus FREE phone support.
    Strongly suggest that you take FULL advantage of the above before it runs out.  Let Apple deal w/the problems.
    Mac OS X (10.4)
    Conflicting info:  Please update/correct your profile so that you can receive the correct troubleshooting suggestions.  This will assist the users in trying to help you.  Thank you.

  • How to set emails for multiple users?

    Hello,
    We have a scenario, where there are several users whose email is not set in "My Account". We want to set this in one shot, what is the best bet for us?
    Also we want to send email to a person outside OBIEE infrastructure, how can we do this?
    Please reply

    I've found the same problem in OS X Lion, with Mail, iCal and Address Book getting confused when two Exchange accounts on the same server are configured, resulting in either missing or duplicate entries (despite everything appearing fine when accessing the accounts individually via Outlook or OWA).  iOS doesn't have any problem with this setup; two Exchange accounts on the same server work perfectly; the issue seems specific to Mac OS X.
    After some experimentation I've found a workaround.  Since the issue crops up with two Exchange accounts on the same server, it seems possible to trick OS X into thinking the accounts are on two separate servers through a little DNS manipulation (which I realize may not be a practical option for everyone).  Here's what resolved the issue for me:
    My external and internal DNS FQDNs for the mail server were mail.mydomain.com.
    I set up a new DNS entry - mail2.mydomain.com - as a CNAME for mail.mydomain.com.
    On my Mac, I set up Exchange account #1 with the server set to mail.mydomain.com.
    I then set up Exchange account #2 with the server set to mail2.mydomain.com.
    Even though both FQDNs resolve to the same IP, this seems sufficient for Mac OS X to consider them as separate servers, elliminating the problems I had before when I set both Exchange accounts to the same mail server FQDN.
    I've only tried this on OS X 10.7 Lion, and the recent 10.7.1 update, although I wouldn't be surprised if the same trick works for earlier versions of OS X.

  • How to create template for multiple users and proper variables for DesktopDNA

    Here's the scenario:
    25 WXPSP2 laptops with only ZENworks Desktop Management agent installed.
    Laptops have at least 4 user profiles each. All laptops have same
    configuration. I want to create just one image for all laptops and am
    using personality migration to handle the different user profiles on each
    laptop.
    We are using ZENworks 7 on a NetWare server.
    Using the DNA Template Editor, I create a template by selecting All local
    user profiles on source machine, selecting User Accounts Settings under
    System, and name the template DNAusers.dtf.
    I then create an application object, CollectDNA, to collect the
    personality following the instructions in guide. I associate CollectDNA
    with a workstation and select Force Run and App Launcher. This is the
    parameter setting: (There is no VOL1 on this server)
    /D \\Server1\SYS\ddna\data\%CN%\X-REMOTE1 /T \\Server1
    \SYS\ddna\templates\DNAusers.dtf /X
    I go to X-REMOTE1 laptop and login as an administrator but nothing
    happens. I then click on Application Explorer and double-click on
    CollectDNA object and get: could not launch CollectDNA. The network
    path was not found. Checking My Network Places, I see no NetWare
    Services listed. And, although the ZENworks Desktop Management Agent
    policy says to display the ZENworks authentication dialog, the login
    screen never appears.
    Any suggestions?

    OK so I changed %CN% to "Admin" in the application object and restarted
    laptop and logged in as Admin in the ZENworks Desktop Management
    authentication screen. Nothing happened until I clicked on the
    application windows and then it tried to launch CollectDNA but then I get
    the Application Launcher status: the network path was not found.
    I saw an earlier response you gave to someone else who had the same
    message and did the same but still get this error message.
    Do you see anything else that I'm doing incorrectly?
    > On Mon, 17 Jul 2006 22:59:30 GMT, [email protected] wrote:
    >
    > > /D \\Server1\SYS\ddna\data\%CN%\X-REMOTE1
    >
    > if you do a force run with wks associatione (perhaps even selected)
    secure
    > system the %CN% can not be resolved..
    > --
    >
    >
    > Marcus Breiden
    >
    > If you are asked to email me information please change -- to - in my e-
    mail
    > address.
    > The content of this mail is my private and personal opinion.
    > http://www.edu-magic.net

  • How to use the same POWL query for multiple users

    Hello,
    I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
    "Query 'ABC' is already open in another session."
    where 'ABC' is the query name.
    Can you please tell me how to use the same POWL query for multiple users ?
    A fast reply would be highly appreciated.
    Thanks and Regards,
    Sandhya

    Batch processing usually involves using actions you have recorded.  In Action you can insert Path that can be used during processing documents.  Path have some size so you may want to only process document that have the same size.  Look in the Actions Palette fly-out menu for insert path.  It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

  • How can i set up multiple user accounts for my new ipad mini?

    How can i set up multiple user accounts for my new ipad mini?

    The iPad mini is basically a one user device. There are no Accounts. You can set up restrictions so that only you can do certain things.

  • How can I create a folders of apps for multiple users?

    I use several iPads with my students and would like to set up a folder for each student. I want to place "an alias" of each app the student uses in their folder. On my Mac, I can "make alias" and place aliases in seperate folders. How can I do that on my iPad? Thanks!

    You can drag one app on top of another and make a folder. However the limit to this is, for your situation, there can be no sharing of apps....the app Fred can only be in one folder because it's only on the device once.  (so it may not work for what you need)
    and I cannot recall if you can edit the name of the folder.
    Unfortunately, for situations like yours, the iPad was created to be a single user device, so there's really not support for multiple users or multiple levels of access.

  • How to run the the impersonation permission grant command for multiple users

    I have run below command earlier to grant the impersonation for a user called user1
    get-mailbox -identity user1 | add-adpermission -user domainname\service application user -ExtendedRights ms-Exch-EPI-May-Impersonate
    Now I want to run this command for multiple users like user2, user3, user 4 together. How should I run the command.
    This is for Exchange Server 2007 SP2
    Abhijeet M. Mohite

    Hi Abhijeet
    get-mailbox -identity user1 | add-adpermission -user domainname\service application user -ExtendedRights ms-Exch-EPI-May-Impersonate
    I am little bit confused with this command so can you please help me what to right inplace of User1 and domainname\service application user
    Example: I wanted to give Impersonate rights to
    [email protected] then can you please complete command for me.      Thanks in advance.
    Warm Regards, Pramod Kumar Singh Manager-IT

  • HT5534 How do i purchase keynote for multiple users without a MAC computer?

    How do i purchase keynote for multiple users without a MAC computer?

    Guy, you see, I understand you need to be with the Mac you want to download Keynote.
    And yeah, Keynote only works with the Mac OSX and iOS

  • How to make Adobe acrobat feature to convert SAP  Pages to PDF available for multiple users connected to the same Citrix server

    Hi,
    In my previous endeavours to solve this business requirement where multiple users will be able to use the Adobe acrobat feature to convert SAP pages inside SAP to PDF, I was told that it is not possible to do this for multiple users at the same time. However I have found an article according to which it says it is possible. Could you check it once and let me know if this article can be used for implementing the requirement stated above as this link clearly indicates that Adobe Acrobat is supported on Citrix.
    Please find the link below where it states it is adobe acrobat is supported in Citrix for multiple users.
    http://www.adobe.com/devnet-docs/acrobatetk/tools/AdminGuide/citrix.html.

    1. What is the Acrobat feature that you mean? There's nothing specific to SAP included with Acrobat.
    2. Yes, some Terminal Server configurations appear supported (check carefully). All users of the terminal server will need a license, so far as I know - total licenses = total individual people using.

  • How do I install an application for multiple users?

    ... not only for the administrator...

    They are all set up for multiple users if they are in the applications folder.
    ...JER

  • SESSION VARIABLES : HOW TO TEST FOR MULTIPLE USERS

    I have a username session variable set up on a localhost testing envirnoment.
    This works fine for one user, but when I open another occurence of the browser (or just another tab) to test for multiple users the system overwrites the session variable with the last username input.
    So the question is:
             Why doesn't dreamweaver hold an instance of the session variable for each browser session? and if not what are your suggestions?
    Thanks
    Adam.

    Thanks for that.
    After scouring the internet I found the only way of running 2 instances of firefox  without them sharing the session variables is to create 2 new firefox profiles in windows + set the MOZ_NO_REMOTE environment variable.
    Internet explorer is much easier as it has a 'new session' option in the file menu, but seems to have more trouble displaying tables correctly.
    Hope this helps anyone with a similar problem.

  • One skype number for multiple users in Skype Manag...

    Is it possible to get one Skype-in phone number and assign it to multiple members in Skype Manager?
    If so, how do I go about it?
    I also asked this here: http://community.skype.com/t5/Skype-Number/One-skype-number-for-multiple-users-in-Skype-Manager/m-p/...

    You could always allocate a number to multiple business accounts in Skype Manager. Then re-direct the number via IP-PBX to go to different extensions.
    Try the following here [If you look in the advanced section of this manual, you'll see an example of two accounts using one number]
    http://download.skype.com/share/business/guides/skype-connect-user-guide.pdf
    7.5 Online Numbers for incoming calls
    You can use both business Skype accounts and Online Numbers simultaneously on a
    single SIP Profile if you wish. In other words, you may have multiple business accounts
    and Online Numbers added to one SIP Profile at the same time.
    7.5.1 Adding an Online Number to your SIP Profile
    Shows you how to setup such
    Thanks,
    Kent C.

  • Changing Assignment Details for multiple user

    Hi everyone,
    In the RelationShips tab of a bundle, how can we change the "Assignment Details" for multiple user at once? Per exemple, I have a bundle that have about 100 user assignments. The bundle show on Start Menu but no on the Nal. If we want all of our users to have this bundle on the Nal Windows, how can we instruct that easily and quickly, instead of selecting each user and changing the Assignment Details ?
    thank you for your help !
    DM

    I am also trying to update the shortcut locations on many apps for a mass amount of users. Mr. Pond, or dominicm, can you explain or give a example ZMAN command that would be able to do this? From the documentation I can find it only seems to affect the distribution and scheduling but not the shortcut location.

Maybe you are looking for