Changing Assignment Details for multiple user

Hi everyone,
In the RelationShips tab of a bundle, how can we change the "Assignment Details" for multiple user at once? Per exemple, I have a bundle that have about 100 user assignments. The bundle show on Start Menu but no on the Nal. If we want all of our users to have this bundle on the Nal Windows, how can we instruct that easily and quickly, instead of selecting each user and changing the Assignment Details ?
thank you for your help !
DM

I am also trying to update the shortcut locations on many apps for a mass amount of users. Mr. Pond, or dominicm, can you explain or give a example ZMAN command that would be able to do this? From the documentation I can find it only seems to affect the distribution and scheduling but not the shortcut location.

Similar Messages

  • Changing the display profile for multiple users at once.

    Is it possible to change the display profile for multiple users at once? We would like ot be able ot add tabs and channels globally, but right now we can anly do it for once user at a time. Also, is it possible to have certain generic display profiles that all users use? like an admin profile and a tech support profile and a normal suer profile? Any help is appreciated...

    Yes this possible using the dpadmin batch command.
    Please check the dpadmin documentation for the batch command.
    For generic display profile what you can do is create users and assign the user particular roles. The display you would be creating would be for the roles. The users belonging to that role would inherit that display profile.
    HTH ..

  • One CUP request for assigning role to multiple users

    Hi,
    We assign roles to users in production only through CUP requests.. We use GRC 5.3
    Here we have a case where we need to assign one role to  60 users in production(each user may have different  roles assigned in the back end) . I can raise one CUP request for all users using " multi-user" option in Copy request . But when we want to make a risk analysis , it will not show risks at user level as each user had different roles and may get different risks by adding new role.
    Instead it will give risks if any for only that new role which want to assign. Our manager is not accepting as this is not giving complete picture of risks for each user when we add new role.
    Please suggest me if there is any other way where I can make a risk analysis for each user when I created a CUP request for multiple users.
    Or the only solution is to create 60 CUP requests ?? this would be too manual
    Regards ,
    jaags

    Raghu,
    thanks for the reply, you are right as per the audit .But suppose if it is for 200 users ,creating 200 CUP requests will be impractical right.
    there should be some solution for this , because there will be many situations practically where we have to assign roles to N number of users.
    Is this possible in GRC 10 ? any idea ?
    Regards,
    Jaags

  • Change Reference Attribute - "Manager" for multiple users

    Hi,
    I have a scenario in which I have to create a workflow to change a reference value attribute - "Manager" for multiple users in one go. Is it possible to achieve this with workflow. If yes, then how?
    Regards,
    Manuj Khurana

    Hello,
    not out of the box, since in workflows and custom activities you can only access the reqestor and target object direcly.
    But you can develop your own custom activity that fits you need, or do it with powershell custom activity.
    I did a very similar thing, to be able to change users group membership from the user UI, so I have also edit objects other then requestor and target in a workflow.
    Since both (manager and member) are reference attributes you maybe find this article helpful:
    http://social.technet.microsoft.com/wiki/contents/articles/19615.fim-2010-r2-how-to-manage-group-membership-from-the-user-ui.aspx
    I used this powershell activity in my solution:
    http://fimpowershellwf.codeplex.com/
    Regards
    Peter
    Peter Stapf - ExpertCircle GmbH - My blog:
    JustIDM.wordpress.com

  • Triggering a sub work flow for multiple users at same time.

    I have a scenario in which I have created sub workflow as an activity for approval process. This sub work flow should be triggered for multiple users at the same time and their decison is independent of each other.
    This is like creating multipe instance of the same sub work flow and then the sub work flow runs indepedently as a new work flow for each of the approver and the process is completeded for approver independently.
    How can this be achieved?

    Tyr to do like this,
    1. First include the subworkflow in the main workflow template.
    2. Now include standard Block Step in the main workflow template.
    3. In the block select the block type as ParForEach.
    4. Before doing the 3rd point make sure that all the agents for whom you want whom you want to initiate the workflow, populate them in a Multiline conatiner element.
    5. Once completing 3rd and 4th points open the block step under the tab ParallelProcessing  assign the multiline container element name in the   for e;g if the multi line container element name is COSTCENTER then do the binding like below. the conatiner element COSTCENTERLINE is created by default once you include the multi line conatiner element under parller processing tab.
    &COSTCENTER[&_WF_PARFOREACH_INDEX&]&   -------->     &_COSTCENTER_LINE&
    Now assign the agent of the subworkflow as COSTCENTERLINE , imean if suppose you have 3 entries in the internal table then three separate and for three different agents the workflow is instantiated.

  • How to alter the default profile for multiple users

    I am trying to alter the default profile assigned to users during user creation to a new profile. I know to change the profile for one user using the syntax
    alter user abc profile profileabc
    The issue I have is that there are 100's of users under default profile and changing for each of them manually would be difficult. The approach that I see is to write a shell script where I connect to the db and get a list of all the users with default profile. Then I loop through the file making connection to the db each time and executing the alter statement.
    Please help if you think that there can be a more efficient approach to this.
    Thanks

    alter user abc profile profileabcspool newsql.sql
    select 'ALTER USER '|| USERNAME || ' PROFILE NEWPROFILE;' FROM DBA_USERS;
    SPOOL OFF
    @newsql.sql

  • Send Mail to External Mail ID's for Multiple Users

    Hi All,
    I want to send mail from SAP to External mail ID's for multiple Users.The program is ok.
    But I want to send this to Multiple external Mail id's. Where should I assign this receivers list. Pls advise.
    What is the transaction to assign multiple receivers.?
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
          EXPORTING
            DOCUMENT_DATA              = GD_DOC_DATA
            PUT_IN_OUTBOX              = 'X'
            COMMIT_WORK                = ''
          TABLES
            PACKING_LIST               = IT_PACKING_LIST
            CONTENTS_TXT               = IT_MESSAGE
            RECEIVERS                  = IT_RECEIVERS
          EXCEPTIONS
            TOO_MANY_RECEIVERS         = 1
            DOCUMENT_NOT_SENT          = 2
            DOCUMENT_TYPE_NOT_EXIST    = 3
            OPERATION_NO_AUTHORIZATION = 4
            PARAMETER_ERROR            = 5
            X_ERROR                    = 6
            ENQUEUE_ERROR              = 7
            OTHERS                     = 8.
    Thank You.
    Pranitha.

    IT_RECEIVERS parameters needs to be passed as shown below.
        wa_receivers-receiver = "..........External mail id".
        wa_receivers-rec_type = 'U'.
        wa_receivers-express = 'X'.
        APPEND wa_receivers TO lt_receivers.
        CLEAR  wa_receivers.
    Once mail is triggered to the external mail id's, check the mail is transferred from SAP or not using the tcode SCOT.
    In SCOT,follow the path UTILITIES-> Overview of send orders.
    Regards,
    Satish Kanteti

  • GRC 10: Initial password for multiple users creation in a ARQ request???

    Hi All,
    I was trying to create a request in ARQ for multiple users. I noticed that, I could add all the necessary required information for multiple users using the template. I added the roles as well. However, I could not set the initial password for multiple users as the tab "User System Details" (where the initial password is provided for a single user) is disabled!!!
    The users were successfully created in the R/3 system. However, due to non-availability of initial password, these users could not log into the R/3 system.
    May I know how to set the initial password for multiple users?
    Regards,
    faisal

    Vit,
    I was trying to test this multiple user creation scenario. But I am surprise to get a template where in I have only below mentioned fields:
    1. User Name
    2. User Id
    3. Email
    I filled these details and uploaded. Then filled the "User Access" details. While submitting the request, I got the error:
    "Last name is not mentioned for user id XXX"
    But there is not such column in provided template by GRC!
    I added 2 columns: First Name and Last Name and saved it and uploaded again. These details are not picked up!
    Following are the only columns shown:
    1. User Name
    2. User Id
    3. Email
    4. Manager
    Out of above, only "Manager" field is editable and others are disabled.
    Last time I remember, I has got complete template with all the columns. Unfortunately, I have deleted it and not available with me now.
    Any idea you have why am I getting such incomplete template?
    Regards,
    faisal

  • One skype number for multiple users in Skype Manag...

    Is it possible to get one Skype-in phone number and assign it to multiple members in Skype Manager?
    If so, how do I go about it?
    I also asked this here: http://community.skype.com/t5/Skype-Number/One-skype-number-for-multiple-users-in-Skype-Manager/m-p/...

    You could always allocate a number to multiple business accounts in Skype Manager. Then re-direct the number via IP-PBX to go to different extensions.
    Try the following here [If you look in the advanced section of this manual, you'll see an example of two accounts using one number]
    http://download.skype.com/share/business/guides/skype-connect-user-guide.pdf
    7.5 Online Numbers for incoming calls
    You can use both business Skype accounts and Online Numbers simultaneously on a
    single SIP Profile if you wish. In other words, you may have multiple business accounts
    and Online Numbers added to one SIP Profile at the same time.
    7.5.1 Adding an Online Number to your SIP Profile
    Shows you how to setup such
    Thanks,
    Kent C.

  • WebStart Single Install for multiple users

    Has anyone figured out how to solve the problem of having to install the software for multiple users now?
    With recent versions of the Sun WebStart, the cache directory has changed to the user's personal directory.
    It used to be that the cache directory was a common shared directory off the C: drive.
    For the software we have developed, it was great to install once as the admin, download the files so that they are cached, and then copy the links to the all users desktop which pointed at that shared location.
    Now there appears to be no way to do this. We've looked to find the default cache location to change it, but there is no way to specify this (that we've found).
    I know I can change each user's cache directory to point to a common location, but it means signing on as each user and making this change manually which takes a considerable more time than it did before. Java WebStart was the EASY way to install the software before (and did not require a browser). Now it is harder than just using a browser with the plugin. We'd like to get the browser out of the picture though still.
    I can see how this feature could benifit individual users who only want their own programs to show up , but we really need to make it work like before for ease of use. With the number of users we are dealing with, it would be very difficult to tell them to click on a link to install the program but only do that the first time, then start using the new link that is created by the program.
    Any suggestions from anyone?

    Sorry, I just realized this is in the wrong forum.
    I'll go post it in a more correct forum instead.

  • One skype number for multiple users in Skype Manager

    Is it possible to get one Skype-in phone number and assign it to multiple members in Skype Manager? If so, how do I go about it? I also asked this here: http://community.skype.com/t5/Skype-Number/One-skype-number-for-multiple-users-in-Skype-Manager/m-p/3275656#M14366.

    You could always allocate a number to multiple business accounts in Skype Manager. Then re-direct the number via IP-PBX to go to different extensions. Try the following here [If you look in the advanced section of this manual, you'll see an example of two accounts using one number]http://download.skype.com/share/business/guides/skype-connect-user-guide.pdf 7.5 Online Numbers for incoming callsYou can use both business Skype accounts and Online Numbers simultaneously on a
    single SIP Profile if you wish. In other words, you may have multiple business accounts
    and Online Numbers added to one SIP Profile at the same time. 7.5.1 Adding an Online Number to your SIP ProfileShows you how to setup such Thanks,Kent C.

  • How to use the same POWL query for multiple users

    Hello,
    I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
    "Query 'ABC' is already open in another session."
    where 'ABC' is the query name.
    Can you please tell me how to use the same POWL query for multiple users ?
    A fast reply would be highly appreciated.
    Thanks and Regards,
    Sandhya

    Batch processing usually involves using actions you have recorded.  In Action you can insert Path that can be used during processing documents.  Path have some size so you may want to only process document that have the same size.  Look in the Actions Palette fly-out menu for insert path.  It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

  • Can we creat an Apple ID for multiple users?

    I work for a company where we are rolling out iPads in big amounts. The problem is that they all need an Apple ID in the training they get about the iPad they receive because they have to install MobiControl on it.
    It's no problem to let them create an Apple ID at home, but they have to fill in credit card numbers once they connect at work when they try to install apps. That's the problem... Not everyone want's or has credit cards...
    Maybe it's possible to create an Apple ID for multiple users???
    Thanks!

    iPad in Business and Education
    You may find a better answer in this part of the forum, since it's meant for situations like you're in.
    http://www.apple.com/support/appleid/
    is also info about apple ID's.
    You can make apple ID's without a credit card, you just have to jump through a couple of hoops to do it since the default is that people will always give a credit card. The key to making an ID without a credit card is that you try to download a free app first, then follow the 'make an ID' prompt. That will get you the 'none' option for payment.

  • Can I use one itunes account for multiple users and multiple devices

    Can I use one itunes account for multiple users and multiple devices?

    The iTunes EULA, as I understand it (I'm not an attorney )for Apps is basically that one person can use an App multiple devices, or multiple people can use an App one device..so one to many or many to one, but not many to many....

  • For multiple users on a computer, will Firefox Sync synchronize all the users on a computer or only the one logged on?

    For multiple users on a computer, will Firefox Sync synchronize all the users on a computer or only the one logged on? For instance my spouse and I will share a laptop and I want to sync my Firefox when I log on there also but do not want to sync her data.

    Curt
    how do you know if your using the
    Central cache all distributed cache ?
    and are they both stored in the same place ?

Maybe you are looking for