How to show invoice number on Receipt Buy page for PayPal purchases

In our Receipt Buy layout we include the invoice number tag as
{tag_invoicenumber}
However, when a customer completes a purchase using PayPal as the payment method, the invoice number is not shown here.
Is there something else that we need to do here or a different tag to display for PayPal?
Also, we show the authorisation code for credit card purchases but would like to hide this for PayPal. Is there a way to do this?
Thanks,
Colin

Sounds like you not quite set up Paypal properly, comon thing to happen.
You need to ensure you follow the paypal standard setup guide exactly.

Similar Messages

How to show Invoice number same as Sales Order Number..?

HI,
I need to show Sales Order Number same as Invoice Number how i can setup this..? can any one help me on this..?
Ex: I raised a Sales Order: 00001, this has booked and shpieed now i ran the WF back ground process and run the autocreate master program to generate the invoice, here i need to show the invoice number as 00001 i..e same as the Sales Order Number.
How i can achieve this..?
Please advice..
Regards,
KV.

KV,
I suspect you'll need to customize the Autocreate routine to ignore the sequence nextval call and instead look at your sales order number.
You would also need to be very careful that your OM setups supported this. I've seen this as a 'business requirement' before but almost invariably it doesn't make a lot of sense when you have the originating sales order number, line and shipment to quote as a reference on the invoice. Have you considered all of the following:
<li> If you ever need to short ship or to ship on different dates, you will need more than one invoice for the same order. How would you manage that given that those invoices would need unique numbers?
<li> Different order types - by adopting a 'synchronized' invoice sequence, you will need to ensure that you don't create a conflict with order type sequences - i.e. OM allows you to have an order 100001 of Order Type A and an order 100001 of Order Type B if you give different sequence assignments but this would cause problems with your invoice sequence.
Regards,
Jon

How to show "ALL" Values by default in Page Drop-Down Lists in Pivot Tables

Hi Everyone,
Iam stuck with 1 problem please can any 1 help me if u know the solution.
Here is my problem:
How to show "ALL" Values by default in Page Drop-Down Lists in Oracle BI Pivot Tables?
For example, if you place Region in the pages area, a Region drop-down list allows the user to select a particular region, and see the data for only that region, rather than seeing all the Regions,But by default its not showing "ALL" option in the drop down list ,rather than doing that its showing result for only 1 region by default.
And an other problem with this pages area is, if we palce the multiple attributes in the Pages area in the pivot table, the (Fields)result is showing in vertically, the attributes 1 by 1(Every attribute in a new line) ,rather than showing like that, is there any way to show the results in horizantally?(We want to have it as a seperate drop drown list for every field horizantally not as a concatenated list).

Thanks Nikhil. But I am fetching the values from the LOVCache.java.
I am using <af:selectManyChoice>. Is there any way I can use LOVCache.java value for selecting default values instead of hard coding?
I mean to say can I write
unselectedLabel="#{LOVCache.entityTypeSelectionList.anyValue}"
where LOVCache.entityTypeSelectionList is used to populate the drop down box.
Regards,
Aseet

How to get the number of decimal places configured for a site column

Hi,
I have a column 'SampleNumCol' of type Number, the number of decimal places to be displayed is configured as 2.
The column conatins a value, but when retrieved programatically is displayed as 5.00000000 instead of 5.00.
I am retrieving this column using listitem.Properties[field.InternalName].
I need to trim the decimals based on number of decimal places configured for the site column.
How to get the number of decimal places configured for a site column?
Thanks in advance,
dhijit

Get the field as SPFieldNumber and then check DisplayFormat which returns
SPNumberFormatTypes
SPFieldNumber numberField = list.Fields.GetFieldByInternalName("YourNumberFieldName") as SPFieldNumber;
SPNumberFormatTypes numFormatType = numberField.DisplayFormat;

If I buy "pages" for my daughters iPad can I use it on mine?

If I buy "pages" for my daughter's iPad, can I download it to my iPad?

If your daughter is a child living in your household or an adult 23 and under away at college yes, you can share her content. If you are both adults with your own hoseholds, then the End User License Agreement does not allow that type of sharing of content.

How I can set the spelling language in Pages for iPad?

how I can set the spelling language in Pages for iPad? may for german...

how I can set the spelling check to other language in Papers/iPad?
The only choices you have in the iPad itself are to change the keyboard or change the user interface language. If that doesn't do what you want, probably best ask the people who make Papers.

I have no download link or serial number on my order page for Photoshop Element 12

I have no download link or serial number on my order page for Photoshop Elements 12 like I have for previous version.
I asked for upgrading on october 23th, base on the grace period, because I bought PE11 in september, since this I chatted to times with Adobe support about this with only a very little step each time for the problem resolution. But we are now novenber 24th, one month later and I have no serial number and download link on "my adobe" order page.
Chatting is very difficult for non english speaking person. I have no direct email for order resolution where I can take time to answer and ask question.

Try direct contact with country reps by phone or fax:
Adobe Systems France SAS
112, avenue Kléber
75784 Paris Cedex 16
France
Tel: +33 1 56 54 99 00
Fax: +33 1 56 54 99 01

How to find Invoice number linked to FI accounting document number ??

Hello All,
I have been looking around for all possible combinations to find the link between FI accounting document number (BSEG-BELNR) and Intercompany Invoice number (for which billing corr. to STOs' or POs' is done).
The requirement is that during ERS posting, we have accounting document numbers (BSEG-BELNR) and associated STOs' for this (BSEG-EBELN), but we are unable to map the Intercompany Billing Invoice number(s) (where the billing corr. to STOs' obtained from BSEG-EBELN) to this accounting document number (BSEG-BELNR).
Any pointers or detailed view solution would be of great help.
Thanks,
Ansh

Hello DPM,
Thank you for the descriptive help. But my requirement is to look for Intercomapny Billing number (VBRK-VBELN) linked to an accounting document number (BSEG-BELNR) and not Invoice Receipt Number.
The steps that I am following are:
From BSEG, found EBELN (Stock Transfer Order) and XREF3 (Reference Key, combination of fiscal yr., some ref. number, maybe GR no. and ref item no.), based on BELNR (Accounting document number).
From EKBE, found XBLNR (Reference Delivery Number or Direct Intercompany Billing Number on which GR is done) based on
EKBE - EBELN = BSEG - EBELN
EKBE - BELNR = BSEG - XREF3 (only ref and item no., considering it to be a GR no.)
EKBE - VGABE = '1' and EKBE - BEWTP = 'E'.
From VBRP, found VBELN (Intercompany Billing No., which is a desired number) based on
VBRP - AUBEL = EKBE -EBELN (Stock Transfer Order)
VBRP - VGBEL = EKBE - XBLNR (Delivery number)
Here, I am not sure about 2 things:
Whether the reference no in BSEG-XREF3 will always be Goods Receipt number for Stock Transfer Order or not. If not, then what it can be and how I will have to proceed further then.
Secondly, If in case for an accounting document number, I have 2 Stock Transfer orders (BSEG - EBELN) and same reference number (BSEG-XREF3), then from History table (EKBE) I get only single delivery based on which GR was doen for both STOs', then I shall be getting single Intercompany Billing Invoice from VBRP or different ?
Kindly provide your inputs.
Thanks,
Ansh

How to show the number of page in my document without inserting page number?

I have no idea how to make Pages show the number of the page in my document I'm editing.

In the Pages > View > Show Thumbnails. Each numbered thumbnail is a page in your document. The thumbnail has a blue background when you are on that page.

HOW TO CREATE INVOICES AND BOOK RECEIPTS FOR THE SERVICE CUSTOMERS

whenever a customer approaches our Customer Service Officer he create a
customer account from "Contact Centre" but he does not check "Create account"
checkbox so the client is not created as customer in Oracle Receivables.
How to create invoices and receipts for service customers whose reciprocal
accounts are not created in Oracle Receivables?
Regards
Ahmad Bilal
Message was edited by:
user531507

I am on EP7.0 with NWDS 7.0 SP8, i am getting the exact same error though my Webservices are hosted on PI 7.1 ESR. Where to define the logical destinations of the WSDLs.

Report showing Invoice number, vendor,material and qty

Hi Guys
Is there any report where we can take report for vendor, invoice number, material and qty.
Regards

Dear
yeah! yau can check ME80FN with purchase order history setting.
full marks to me if solved
regdsd
dev...!

How to exclude invoices matched to receipts from approval workflow (APINV)?

I am trying to exclude the approvals for invoices matched to receipts. is this something possible?
Thanks,

I set the value "NO" to exclude PO matched invoices attribute so that the workflow will consider sending approvals to PO matched invoices. But the requirement is, if an invoice is matched to a receipt then I don't want the workflow to be kicked off.

How to buy AppleCare+ for iPhone6 purchased from Verizon?

What the title says. Anyone know? Apple's web site is a waste of time.

John Avelis wrote:
Yes, those are both options. The web site will only allow the purchase of AppleCare+ if one is purchasing the product on the Apple Store. There is no reference to purchasing AppleCare+ elsewhere. Res ipse loquitur.
PS- being faced with a 100 mile drive to an Apple Store, that's hardly a live option....
PPS- Found out that a local independent reseller (Apple Specialist, Inc.) sells the AppleCare+. So I guess we're going there. Or maybe call the number. This is all WAY more complicated than all the other times we've done this. I don't AppleCare for it .
PPS- (to Meg St._Clair) Verizon only sells Verizon's Extended Warranties, and these are not nearly as good a deal as AppleCare+.
Um, yes, there is a reference on how else to buy AppleCare+. It says so on the AppleCare+ page: [https://www.apple.com/support/products/iphone.html]. Read that page again and look towards the bottom of the page:
Important notes
Purchase AppleCare+ with your new iPhone. Or buy it within 60 days of your iPhone purchase:
At an Apple Retail Store (inspection of iPhone and proof of purchase are required)
OR call (800) 275-2273 (requires you to run a remote diagnostic and provide proof of purchase)
See AppleCare+ Terms and Conditions for complete product details.
1. Go to an Apple Store.
2. Call Apple Support at the number provided. How is making a phone call complicated? You call the number, they ask for the device serial number, they perform a remote diagnostic that takes maybe 1-2 minutes, if that, and then you pay for it by credit card, either over the phone or they email you a weblink. The entire process shouldn't really take more than 10-15 minutes.
And Verizon does actually sell AppleCare+. If they say that they don't at the store, then ask for a manager, because the official wireless carriers that sell iPhones (and even the retail stores) are required to either process such a sale and register it with Apple, or at a bare minimum, explain to you that it is available at an Apple store or by calling Apple. Just because the person you spoke to at Verizon was ignorant doesn't mean that they aren't supposed to offer it.

How to show result from process in popup page?

 We want to use one popup page for many information in application. So we want to make the following thing.
 We want to execute process and show result in popup page (through hidden parameter-"P2_MESSAGE").
 We also assign title of region on that popup page through "P2_TITLE".
 What I do not know is how to show popup after process-branch problem.
 Process is executed from one button. Button is located on page "28" and popup page is "2"
 Code for javascript should be like:
 
javascript:popupURL('f?p=&APP_ID.:2:&APP_SESSION.::::P2_TITLE,P2_MESSAGE:'+'status '+','+'&P28_X.') THX

I have found in one thread:
 
 1) create an application item APP_ONLOAD (of course you can choose your own name)
 2) create an application level before footer computation on APP_ONLOAD to clear the item after the page is generated.
 3) place &APP_ONLOAD. (dot also) in the on load property of the page.
 4) fill the APP_ONLOAD using :APP_ONLOAD := 'onload="your own javascript to call a popup window;"' in the plsql of an after On Submit - After Computations and Validations process (type PL/SQL anonymous block)
Fill the when button pressed property of the process with the button you want to use to show the popup.
 5) create a branch to branch to the current page (or a other if you wish)
 
Looks OK but when I create in PL/SQL js with "&" signe, which I use for filling some hidden values in popup page I get error.
begin
is_test_ok (1, :P28_X);
:APP_ONLOAD := 'onload="javascript:popupHeightURL(''f?p=&APP_ID.:2:&APP_SESSION.::::P2_TITLE,P2_MESSAGE:''+''statusu testova''+'','+''&P28_X.'')"';
end; Should I use ASCII codes for that or what? Any example please!
 THX

How to set the number of rows per page dynamically

Hello all,
i urgent need the option to set the number of rows per page dynamically.
I've got a parameter.
In dependence of the value of this paramter i want to set the number of rows per page of a repeating frame.
The Reports Builder version i use is 10.1.2.0.2
I defined a report trigger.
My code so far:
function R_G_BEMERKUNGFormatTrigger return boolean is
begin
if :vYN_Display_one_per_page = 'Y' then
--what i've to write right here??
return (TRUE);
else
     return (TRUE);
end if;
return (TRUE);
end;
Can anyone help me please??
Best regards
Florian

Do you just need to change back and forth between 1 and some other number? If so, you can create two identical layouts, one with the "number of rows per page" preperty (on the repeating frame) set to 1 and the other layout set to whatever. You would have to have duplicate layouts for each group you wanted to do this with. Your format trigger on the outermost master group frame where num of rows was 1 would look like:
function M_G_ename_GRPFRFormatTrigger return boolean is
begin
if :vYN_Display_one_per_page = 'Y' then
    return (TRUE);
else
    return (FALSE);
end if;
end;Your format trigger on the outermost master group frame where num of rows was whatever would look like:
function M_G_ename_GRPFR1FormatTrigger return boolean is
begin
if :vYN_Display_one_per_page = 'N' then
    return (TRUE);
else
    return (FALSE);
end if;
return (TRUE);
end;

How to show invoice number on Receipt Buy page for PayPal purchases

Similar Messages

Maybe you are looking for