How to show multiple messages for a single exception

hi
Please consider this example application created using JDeveloper 11.1.1.3.0
at http://www.consideringred.com/files/oracle/2010/MultipleMessagesExceptionApp-v0.01.zip
It has a class extending DCErrorHandlerImpl configured as ErrorHandlerClass in DataBindings.cpx .
Running the page and entering a value starting with "err" will result in an exception being thrown and multiple messages shown.
See the screencast at http://screencast.com/t/zOmEOzP4jmQ
To get multiple messages for a single exception the MyDCErrorHandler class is implemented like
public class MyDCErrorHandler
extends DCErrorHandlerImpl
public MyDCErrorHandler()
    super(true);
@Override
public void reportException(DCBindingContainer pDCBindingContainer,
    Exception pException)
    if (pException instanceof JboException)
      Throwable vCause = pException.getCause();
      if (vCause instanceof MyMultiMessageException)
        reportMyMultiMessageException(pDCBindingContainer,
          (MyMultiMessageException)vCause);
        return;
    super.reportException(pDCBindingContainer, pException);
public void reportMyMultiMessageException(DCBindingContainer pDCBindingContainer,
    MyMultiMessageException pException)
    String vMessage = pException.getMessage();
    reportException(pDCBindingContainer, new Exception(vMessage));
    List<String> vMessages = pException.getMessages();
    for (String vOneMessage : vMessages)
      reportException(pDCBindingContainer, new Exception(vOneMessage));
}I wonder if calling reportException() multiple times is really the way to go here?
question:
- (q1) What would be the preferred use of the DCErrorHandlerImpl API to show multiple messages for a single exception?
many thanks
Jan Vervecken

fyi
Looks like using MultipleMessagesExceptionApp-v0.01.zip in JDeveloper 11.1.1.2.0 (11.1.1.2.36.55.36) results in a different behaviour compared to when used in JDeveloper 11.1.1.3.0 (11.1.1.3.37.56.60)
see http://www.consideringred.com/files/oracle/img/2010/MultipleMessages-111130versus111120.png
When using JDeveloper 11.1.1.2.0 each exception seems to result in two messages where there is only one message (as intended/expected) per exception when using JDeveloper 11.1.1.3.0 .
(Could be somehow related to the question in forum thread "multiple callbacks to DCErrorHandlerImpl".)
But, question (q1) remains and is still about JDeveloper 11.1.1.3.0 .
regards
Jan

Similar Messages

How to use multiple hierarchies for a single char in single query

Hi,
Is there any way that we can use multiple hierarchies for a single char in single query. I tried and it just allows me to select one hierarchy even if I use hierarchy variable.
I have a requirement where user wants to see information related to a cost center with different cost center groups in different hierarchies (every year has different cost center group hierarchies).
Suppose I want to see information related to a cost center from year 2001-2004.in these four year cost center may have been associated to different groups depending upon that year hierarchy. How can I do that?
Thanks
Jona

Nope. Now way to do this.
There is always just one hierarchy assigned to a characteristic. And even if the hierarchy was time dependent, it only reads it for one key date and not according to transaction data.
Regards,
Beat

Track changes showing multiple entries for a single change?

Hi there .. I'm using Pages '09 v4.1 to edit MS Word '97 documents. I've been using the 'track changes' feature to work on chapters in a book and have done so with no problems so far (about 6 chapters so far in separate files). I went to start the next chapter and noticed that when I make a single change such as highlighting a word and making it italic, the tracking bubbles will show up as individual entries for every letter instead of for a single word. The really annoying thing is that it's not consistent .. some whole-word changes show up as a single entry, while some show as a few entries but don't necessarily correspond to how many letters are in the word being changed. When I try deleting specific tracking bubbles to see which part of the word they correspond to, it varies. For example, if I put the word "similar" in italics on page one, paragraph one, it shows up as 2 entries. When I delete the last entry, "imilar" will go back to standard font, while "s" stays italic until I delete the other entry. It's as though the words in the document are being recognized based on something other than the obvious, and certain letters are being grouped together in the program's brain, while others are separate.
It's not isolated to italics, btw. If I reformat the entire document to be left-aligned instead of center-aligned, it will show lots of separate tracking bubbles in various places through the document, rather than showing one bubble for my single change.
I've tried duplicating and saving a new version of the document, as well as creating a new doc and pasting everything into that and saving as a new doc, though I wasn't sure if this would carry over the problem .. It did.
It's not the end of the world as far as finishing this job, but it's pretty annoying and will be worse for the person who ultimately verifies the changes I've made. Any help is greatly appreciated.

TekWarrior wrote:
I'm part of the end user computing and we are in the process of making a consolidated tnsnames.ora file as part of our migration from Windows XP to 7.
The following two entries are to the same host, but are named different and use different ports, we can't locate the original programmer that set it up.
I need to know if this would cause conflicts or not?
PYRPROD.WORLD =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(Host = [same hostname])(Port = 1521))
    (CONNECT_DATA =
      (SID = pyrp1)
PYRP1 =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = [same hostname])(PORT = 1526))
    (CONNECT_DATA =
      (SERVICE_NAME = pyrp1)
TekWarrior wrote:
I'm part of the end user computing and we are in the process of making a consolidated tnsnames.ora file as part of our migration from Windows XP to 7.
The following two entries are to the same host, but are named different and use different ports, we can't locate the original programmer that set it up.
I need to know if this would cause conflicts or not?
PYRPROD.WORLD =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(Host = [same hostname])(Port = 1521))
    (CONNECT_DATA =
      (SID = pyrp1)
PYRP1 =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = [same hostname])(PORT = 1526))
    (CONNECT_DATA =
      (SERVICE_NAME = pyrp1)
It won't cause any problem.

How to add multiple databases for a single frontend

We have a project based on distributed databases and we have to workout on .Net framework.I want to know some information of connecting multiple databases for a single frontend and how can we access them.
If so we have connected 2 databases for a single frontend in future if I want add one more database to it how it will be possible to do it without disturbing the current connectivity.
Please help me in resolving this problem.
Thanks......

hi,
what do you mean by connecting 2 databases? can you explain further?
using entityframework you can connect to different databases
public class CustomerContext : DbContext
public ReportContext()
: base("DefaultConnection")
public DbSet<Customers> Customers { get; set; }
and your connectionstring (config file)
<connectionStrings>
<add name="DefaultConnection" connectionString="Data Source=(LocalDB)\v11.0;AttachDbFilename=D:\\Database\Project.mdf;Integrated Security=True" providerName="System.Data.SqlClient" />
</connectionStrings>
you can add more connection strings on it.
https://msdn.microsoft.com/en-us/library/vstudio/cc716756(v=vs.100).aspx
https://msdn.microsoft.com/en-us/library/ms254978(v=vs.110).aspx
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

How to show multiple values for Unique records in Report

Here's my question/problem:
I've joined two tables, one table (TBL1) contains an object id (OBJ_ID) that repeats and the other table (TBL2) contains a date (DT), object type id (OBJ_TYP_ID), and object type description (OBJ_TYP_DES). The tables are joined by an inventory id (INV_ID).
The OBJ_ID repeats and has a Date value for each record. I want to report an unique OBJ_ID and show each Date for a particular OBJ_ID in multiple Columns.
An example of the current resultset looks like this:
OBJ_ID OBJ_TYP_ID OBJ_TYP_DES DATE
1 1 TYPE1 4/1/2009
2 1 TYPE1 4/1/2009
3 1 TYPE1 4/10/2009
1 2 TYPE2 5/3/2009
3 1 TYPE1 3/30/2005
4 1 TYPE1 4/1/2009
5 1 TYPE1 4/1/2009
5 2 TYPE2 5/1/2009
1 1 TYPE1 4/3/2007
1 1 TYPE1 3/30/2005
I want to express the resultset like this:
OBJ_ID OBJ_TYP_ID OBJ_TYPE_DES DATE1 DATE2 DATE3
1 1 TYPE1 4/1/2009 4/3/2007 3/30/2005
1 2 TYPE2 5/3/2009
2 1 TYPE1 4/1/2009
3 1 TYPE1 4/10/2009 3/30/2005
4 1 TYPE1 4/1/2009
5 1 TYPE1 4/1/2009
5 2 TYPE2 5/1/2009
What technique is best to use to do this? I know I could create another table and populate the rows/columns by reading data from this query, but is there a better way?

Hi,
cclemmons wrote:
I want to express the resultset like this:
OBJ_ID OBJ_TYP_ID OBJ_TYPE_DES DATE1 DATE2 DATE3
1 1 TYPE1 4/1/2009 4/3/2007 3/30/2005
1 2 TYPE2 5/3/2009
2 1 TYPE1 4/1/2009
3 1 TYPE1 4/10/2009 3/30/2005
4 1 TYPE1 4/1/2009
5 1 TYPE1 4/1/2009
5 2 TYPE2 5/1/2009
What technique is best to use to do this? I know I could create another table and populate the rows/columns by reading data from this query, but is there a better way?Absolutely! You seem to have an instictive feeling that creating a separate table just for a query is inefficient. You instinct is 100% correct. Maybe in Oracle 7 there was a reason to do that, but today you can query results of other queries as if they were tables, so temporary tables like you describe are very rarely necessary, let alone convenient.
What you want to do is pivot the date columns. Here's one way
WITH     original_query     AS
     SELECT obj_id
     ,     obj_typ_id
     ,     obj_typ_des
     ,     dt          -- date is not a good column name
     FROM     ...          -- the rest of your original query goes here
,     got_rnum     AS
     SELECT     oq.*
     ,     ROW_NUMBER () OVER ( PARTITION BY obj_id
                               ,                    obj_typ_id
                         ,             obj_typ_des
                         ORDER BY        dt     DESC
                       )         AS rnum
     FROM    original_query        oq
SELECT       obj_id
,       obj_typ_id
,       obj_typ_des
,       MAX (CASE WHEN rnum = 1 THEN dt END)     AS dt1
,       MAX (CASE WHEN rnum = 2 THEN dt END)     AS dt2
,       MAX (CASE WHEN rnum = 3 THEN dt END)     AS dt3
,       MAX (CASE WHEN rnum = 4 THEN dt END)     AS dt4
,       MAX (CASE WHEN rnum = 5 THEN dt END)     AS dt5
FROM       got_rnum
GROUP BY obj_id
,       obj_typ_id
,       obj_typ_des
;As you can see, this adds two layers of queries on top of your original query. One of those layers is probably not needed; depending on what you're doing in your original main query, you can probably compute rnum there, and omit the got_rnum sub-query.
Also, depending on the relationship of obj_id, obj_typ_id and obj_typ_des, some of what I posted above may not be needed but including it won't really hurt.
If you want to know more about this technique, search for "pivot" or "rows to columns". A <tt>SELECT ... PIVOT ...</tt> keyword was introduced in Oracle 11, but most of what you'll find when you search for "pivot" doesn't assume you have Oracle 11 (nor does the query above require Oracle 11).
This assumes you know an upper limit (5 in the example above) of dts that can appear in any line of output.
See [this thread|http://forums.oracle.com/forums/thread.jspa?messageID=3527823&#3527823] for a discussion of some alternatives.

How to send multiple data for a single element

Hi All,
I have a requirement where I have to send multiple data for single element per single transaction. For example
Id details
1 abcd
1 efgh
1 def
Now, when I am selecting this ID from database, I have to get all the details in a single xsd like
<id>1</id>
---><details>abcd</details>
<details>efgh</details>
<details>def</details>
Thanks

Hi,
The following XSLT...
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:template match="/">
<xsl:variable name="root" select="/"/>
<root>
<xsl:for-each select="distinct-values(/root/entry/id)">
<xsl:variable name="id" select="."/>
<entry>
<id><xsl:value-of select="$id"/></id>
<xsl:for-each select="$root/root/entry[id = $id]">
<details><xsl:value-of select="details"/></details>
</xsl:for-each>
</entry>
</xsl:for-each>
</root>
</xsl:template>
</xsl:stylesheet>Will work for a document like this...
<root>
<entry>
<id>1</id>
<details>detail1</details>
</entry>
<entry>
<id>1</id>
<details>detail2</details>
</entry>
<entry>
<id>2</id>
<details>detail3</details>
</entry>
</root>Hope this helps...
Cheers,
Vlad

How to have multiple orders for a single contract

Hi all, my question is:
How to have multiple orders with respect to a contract which is valid for many years? The orders are given periodically over the lifetime of the contract. Once the order is given, the order quantity needs to be confirmed and then the order needs to be billed.
Thanks in advance.

Hi Bappaditya,
To get multiple orders from a contract, you can either create an order as a follow up document from the contract
Or
Maintain the contract determination settings.
In such a case, everytime you create an order the contract determination happens, for the particular business partner and product.
For this to happen you need to maintain the customizing settings:
1. Copy Control between contract and order
2. Contract determination setting in the order transaction type
The qunatity confirmation can be done by standard setting at itme category level.i.e. If the quantity is more than that stated in the contract an error is raised.
For billing of order you will have to maintain the billing setings like billing type, biliing item category, billing item determination.
Hence every time your order is created it comes in the billind due list from where you can create the blling document.
Wish the information is helpful.
Regards,
Shalini Chauhan

How to create Multiple Address for a single customer

Respected Members,
In tcode Xd01 we create on customer but there we can maintain only one address but sometimes a scenario can be that single customer can have different address .
How to do that.Any exit is available to create multiple address with creation of single customer.
This provision is given while creating a Business Partner.Tcode is BP .In this Address Overview tab is there and you maintain multiple address to single Busines partner.
Same thing can we do for the customer.
Any solutions or suggestions,please give me your support.
Thanks

Hello Manish,
Unfortunately Customers have only one address. However you can use contact persons to store different addresses, or (in the Sales view) you can assign other partner functions with different addresses (e.g. one customer acting as the Sold-to partner may have different Ship-to partners).
If these options do not meet your requirements, you could extend the customer master data with your own functionality and enhance transaction XD01 with your own screens for holding alternate addresses.
Regards,
John.

How to make multiple headers for a single pages doc

Hi,
I am trying to submit works of short fiction to markets such as Asimov's and Analog. Their online submission guidelines typically call out a format like the one described here;
http://www.shunn.net/format/store.html
This seems like a very reasonable thing to want to do with Pages.
I can match this format beautifully in Pages, with one exception. The format they are asking for has a word count in the header of page one, and on the subsequent pages a header that looks like "Story title / author name / page #". I can't figure out how to do this.
Question 1.) Is it possible to do this at all in Pages (iOS or OSX)?
Question 2.) If so, how?
Question 3.) Is there a ready-made template for this, for iOS, anywhere that I may download or purchase?
Thanks -
C

For the time being, I can only respond to Pages for iOS. OS X I'll need to check when I get home (or perhaps someone else will beat me to it). You may wish to post in the Pages for Mac forum for better exposure.
In Pages for iOS you are limited to a single header and footer. There is no Section structure so no way to do different headers/Footers for different pages (as you can do in MS word for example). To modify the Header and insert the text you want: Tap the Tools icon (wrench in upper right), then Document Set up. Tap in the header field, then tap and hold to use the menu to insert pages numbers, then type the text you need.
Quite possibly. Check the app store. Or you may be able to set this up in Pages for OS X and import it into Pages on the iPad. I'm not certain the sections will import however.
Also consider using a different app, such as word for iOS or any of the numerous other word processing apps available.

How to get Multiple Values for a single Variable in BPS.......

Hi Gurus:
I have a layout for planning, where I can plan for 5 days of the week. I also have a day column (yesterday) where I have the actual values. Users want to edit/foecast the next 5 days values. I am using a Variable to get the Date column which uses the System Date. However, since I am getting just one date in the Function Module (Code given below), the remaining days are greyed out and I can not enter the forecast values. I would like the same variable to get a series of dates in the same function module. What changes do I nee dto make in the ABAP code so that the remaining columns (Date) becaoe available for editing??
The FM code I have to get "Today's Date" is as follows:
FUNCTION ZCSHFL_GET_TODAY.
""Local Interface:
*" IMPORTING
*" REFERENCE(I_AREA) TYPE UPC_VAR-AREA
*" REFERENCE(I_VARIABLE) TYPE UPC_Y_VARIABLE
*" REFERENCE(I_CHANM) TYPE UPC_Y_CHANM
*" REFERENCE(ITO_CHANM) TYPE UPC_YTO_CHA
*" EXPORTING
*" REFERENCE(ETO_CHARSEL) TYPE UPC_YTO_CHARSEL
data: ls_charsel type upc_ys_charsel.
ls_charsel-seqno = 1.
ls_charsel-sign = 'I'.
ls_charsel-opt = 'EQ'.
ls_charsel-CHANM = I_chanm.
ls_charsel-low = sy-datum.
insert ls_Charsel into table eto_charsel.
ENDFUNCTION.
I want to get the Yestarday's Date as weel as dates for next 4 days from Today for this variable which are being used in the layout. Can anyone suggest the code tor this please.
Thanks very much in advance......
Best.... ShruMaa

Hi,
What I understand you need to return those dates from function module using parameter ETO_CHARSEL , right? If so just use this code:
ls_charsel-seqno = 1.
ls_charsel-sign = 'I'.
ls_charsel-opt = 'BT'. "we are giving ranges, so days between...
ls_charsel-CHANM = I_chanm.
ls_charsel-low = sy-datum - 1. "...first day is yesterday
ls_charsel-high = sy-datum + 4. "...and last day is 4 days from today
insert ls_Charsel into table eto_charsel.
This way you provide 5 days starting from yesterday till 4 days from today.
Regards
Marcin

How to suppress multiple lines for a single day on a PE50 form

Hello everyone,
I'm working on a timesheet based on a PE50-form. Currently, the following line is used to display one day:
Group: ED
Priority: 1
Row:
|WE CD|TEXT_________________ |ANZHL_|ANZHL_|ANZHL_ | | |
WE = SCHLW-WEEKDAY
CD = SCHLW-CDATUM
TEXT = TP-TEXT
ANZHL = ZES-ANZHL (different conditions)
As soon as there are two time recordings in the cluster, there are two rows on the timesheet. This makes sense when you want to print clockin / clockout times. However, on this form, there is no such information.
My question: Is it possible to only have one line per day even if there are multiple records in the cluster?
I read all the documentation I could find but so far, no success.

hi,
what do you mean by connecting 2 databases? can you explain further?
using entityframework you can connect to different databases
public class CustomerContext : DbContext
public ReportContext()
: base("DefaultConnection")
public DbSet<Customers> Customers { get; set; }
and your connectionstring (config file)
<connectionStrings>
<add name="DefaultConnection" connectionString="Data Source=(LocalDB)\v11.0;AttachDbFilename=D:\\Database\Project.mdf;Integrated Security=True" providerName="System.Data.SqlClient" />
</connectionStrings>
you can add more connection strings on it.
https://msdn.microsoft.com/en-us/library/vstudio/cc716756(v=vs.100).aspx
https://msdn.microsoft.com/en-us/library/ms254978(v=vs.110).aspx
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

How to set multiple styles on a single component in flex ?

Hi ,
I would like to know how to set multiple styles on a single component in flex.
Can anyone give me an example as to how to set multiple styles for a single component ?
Thanks ,
Regards,
Ajantha

Hi tuliptaurus,
You can setStyleName property for chnaging the external css dynamically by using the setStyle() method ...
btn.setStyle("styleName","blendButtonSkinOther");
You can change the external css by using the styleaName property with setStyle method..the line in blue..where blendButtonSkinOther is another css class..
blendButtonSkin {
    fontFamily: Arial;
    fontSize: 11;
    color: #F1F1F1;
    textRollOverColor: #F1F1F1;
    textSelectedColor: #F1F1F1;
    horizontal-align:center;
    width:150;
    height:30;
    cornerRadius:5;
    upSkin:ClassReference('assets.skins.BlendButtonSkin');
    downSkin:ClassReference('assets.skins.BlendButtonSkin');
    overSkin:ClassReference('assets.skins.BlendButtonSkin');
    disabledSkin:ClassReference('assets.skins.BlendButtonSkin');
    selected-up-skin: ClassReference('assets.skins.BlendButtonSkin');
    selected-down-skin: ClassReference('assets.skins.BlendButtonSkin');
    selected-over-skin: ClassReference('assets.skins.BlendButtonSkin');
blendButtonSkinOther {
    fontFamily: Arial;
    fontSize: 11;
    color: #F1F1F1;
    textRollOverColor: #F1F1F1;
    textSelectedColor: #F1F1F1;
    horizontal-align:center;
    width:150;
    height:30;
    cornerRadius:5;
    upSkin:ClassReference('assets.skins.BlendButtonSkin');
    downSkin:ClassReference('assets.skins.BlendButtonSkin');
    overSkin:ClassReference('assets.skins.BlendButtonSkin');
    disabledSkin:ClassReference('assets.skins.BlendButtonSkin');
    selected-up-skin: ClassReference('assets.skins.BlendButtonSkin');
    selected-down-skin: ClassReference('assets.skins.BlendButtonSkin');
    selected-over-skin: ClassReference('assets.skins.BlendButtonSkin');
Thanks,
Bhasker Chari

How can i add multiple validations for a single input box in adf?

hi,
i want to add multiple validation for a single input text control in adf like number validation and its existence in database.
MY JDEV VERSION IS 11.1.1.5.0
pls help !!!!

Hi,
1.I want to validate if the value entered is pure integer
Option 1-
select the component and in the Property Inspector, in the "Core" category select a "Converter" format, select javax.faces.Number, if the user put a string, adf show a dialog error or message error...
Option 2-
or use the Regular expression:-
http://jdevadf.oracle.com/adf-richclient-demo/docs/tagdoc/af_validateRegExp.html
https://blogs.oracle.com/shay/entry/regular_expression_validation
Also check this:-
http://docs.oracle.com/cd/E15523_01/web.1111/b31973/af_validate.htm#BABHAHEI
Option 3-
Frank in his great book 'Oracle Fusion Developer Guide' shows a example using a javascript for input which is allowed only for numbers. You can manipulate for your requirement.
Here is the code:
function filterForNumbers(evt) {
    //get ADF Faces event source, InputText.js
    var inputField = evt.getSource();
    var oldValue = inputField.getValue();
    var ignoredControlKeys = new Array(AdfKeyStroke.BACKSPACE_KEY, AdfKeyStroke.TAB_KEY, AdfKeyStroke.ARROWLEFT_KEY, AdfKeyStroke.ARROWRIGHT_KEY, AdfKeyStroke.ESC_KEY, AdfKeyStroke.ENTER_KEY, AdfKeyStroke.DELETE_KEY);
    //define the key range to exclude from field input
    var minNumberKeyCode = 48;
    var maxNumberKeyCode = 57;
    var minNumberPadKeyCode = 96;
    var maxNumberPadKeyCode = 105;
    //key pressed by the user
    var keyCodePressed = evt.getKeyCode();
    //if it is a control key, don't suppress it
    var ignoreKey = false;
    for (keyPos in ignoredControlKeys) {
        if (keyCodePressed == ignoredControlKeys[keyPos]) {
            ignoreKey = true;
            break;
    //return if key should be ignored
    if (ignoreKey == true) {
        return true;
    //filter keyboard input
    if (keyCodePressed < minNumberKeyCode || keyCodePressed > maxNumberPadKeyCode) {
        //set value back to previous value
        inputField.setValue(oldValue);
        //no need for the event to propagate to the server, so cancel
        //it
        evt.cancel();
        return true;
    if (keyCodePressed > maxNumberKeyCode && keyCodePressed < minNumberPadKeyCode) {
        //set value back to previous value
        inputField.setValue(oldValue);
        evt.cancel();
        return true;
2.I want to check if the value exists in my respective DB You must be having EO or VO if you want to validate with database in that case use the solution suggested by Timo.
Thanks
--NavinK

How to uploade multiple flatfiles for single transaction using BDC?

How to uploade multiple flatfiles for single transaction using BDC?

Hi,
You need to upload all data files into an internal table first either using OPEN DATASET (application server files) or GUI_UPLOAD (PC files).
Then loop at the internal table and call BDC transaction to process the data.
Regards,
Ferry Lianto

How to show multiple records in JDeveloper automatically

Hi, you guys,
May I ask you how to show multiple records, say consecutive three records, of a View object in JDeveloper?
I know that we can just drag and drop a view object as a child (Table) of a scrollPane.
Are there any other approaches?
Thanks a lot for your time.
damon

Thanks for your reply.
You are right.
Table binding is the best solution for that.
But in my mind, a record in a table is always shown in one row (or one line), am I right?
If so, it is not convient to show records with multitple columns.
Let's say, there are 20 columns to show for each record. Then we should display a record in, say 3 lines.
How can we do that?
Are there any suggestions?
I am thinking that maybe I can use secondary row set iterators for that since we can create two or more row set iterators for the same view object.
Assume I want to show three consecutive records. I can use attribute binding to show the current record in three lines by dragging attributes one by one from Data Control Palette to Design Window as Child | TextField;
But I do not know how to use a secondary row set iterator for the next record. Where shall I create a secondary row set ietrator such that I can use it to create and synchronize the bindings.
Thanks a lot
Damon
Message was edited by:
user599641

How to show multiple messages for a single exception

Similar Messages

Maybe you are looking for