How to show the chart(of report header) in drill down tab

Hello all,
i have a subreport with a chart in report header,which has drill down functionality, my requirement is the chart should be visible in drill down tab.
thanx in advance.

Hi,
I believe you need to go into File --> Report Options and select 'Show All Heades On Drill Down'.
Michael.

Similar Messages

How to get the 'hand' cursor on an ALV drill down report?

I have a drill down on PO # going to trans ME23N that is working great.
But I have noticed on my other drill downs (E.G for billing doc VF03) that when the report is displayed the drill down field value is a) underlined and b) has a 'Hand' appear when you place the cursor over the billing document field.
This does not happen on my PO # - it is not highlighted with an underscore, nor do you get the small hand - but it does work when you double click the field.
The field I am using on the ALV report is RSEG-EBELN. This is not a KEY field in the table - perhaps that is why it does not have the underscore and the 'hand'.
Thanks!
Scott

Here it is.
When you build your field cat use the below code.
DATA : x_fieldcat TYPE slis_fieldcat_alv.
* Single click on the field will trigger double click event.Also, a hand
* will appear when the cursor navigates to the field
X_FIELDCAT-HOTSPOT = 'X'.
Regards,
ARS

Condiotnally Resizing Of Report Header At Drill Down Level.

Hi Friends,
I want to decrease report header height when the report is drilled down...
Is it possible with Drilleddowngrouplevel or is there any other way to conditionally resizing the Report Header Height.
Any suggestions please...
Thanks in advance.
Regards,
Ashish B

Ashish,
Not sure if this will suit your needs but you could create a formula in the Report header that replicates a number of carriage returns based on the drilldowngrouplevel.
For instance;
if drilldowngrouplevel <> 0 then
replicatestring( chr( 13), roundup(5/drilldowngrouplevel) )
else replicatestring( chr(13), 10 )
Set the formula to can grow and ensure that you Fit Section for the report header.
Now on drilldowngrouplevel or main page the RH will be 10 lines in height.
On drilldowngrouplevel 1 it will be 5/1 = 5 lines in height
On drilldowngrouplevel 2 roundup(5/2) = 3
and so on

How can I show the chart in forms?

Dear all:
I want to create a line chart. I use the chart wizard and it is successful to create the chart. But, it can't show the chart when I run the form. How can I show the chart in form6i?
Besides, I see a document that refer to 'OG.pll'.
I can't find the OG.pll in form6i. Do I need 'OG.pll' to show the chart when I run the form? Thank you very much!!

Hi Carlos,
You can try to create a code node for check which signature to print.
In global variable declare a variable ie named g_sign type TDOBNAME.
Then pass this var to name of graphics &g_sign&
please check and reply.
regards,

Hide/show text boxes in report header

Hi All,
I'm trying to implement a request to have a tablix header frozen in excel. So, I'm placing it in the report header as text boxes. However, there are two different tablixes (a one per page) with two different headings. I'm trying to place those two headings
into two rectangles in the report header hiding and showing a one of it based on the Page No. It works but only for the first tablix heading as it's shown on the first page and hidden on the second page. But, the second tablix heading is not shown on the second
page for some reason. It's probably due to the Page No rendering is going later than the text boxes appearances on the second page or something else causing it.
I did try to use the Global Page No in if visibility statement for those two rectangles, trying to get Page No through a function, using it as a parameter, but nothing is making the second rectangle to show on the second page report header.
Please, help with how it could be done.
Thanks

Hi al-dol,
Per my understanding that you have put the textbox in the page header to display the table head instead of in the tablix thus you will got the frozen head when export to excel, you have two table header, so you need to add two rectangle to display both in
two different page, now the issue is the second page header didn't display, right?
I have testted on my local environment and can reproduce the issue, the issue can be caused by when you move the rectangle2 on the position of the rectangle1 then the rectangle becomes the child of rectangle1 but not the child of page header thus you will
not shown the rectangle2.
Please check the details information below to see if you have got the rectangle2 inside the rectangle1 like below:
if so, please move the rectangle2 one time and check to make sure you got the "Page Header" in the parent section of both rectangle:
Please also make sure you have use below expression to show/hide the rectangle:
rectangle1:
=iif(Globals!PageNumber=1,false,true)
rectangle2:
=iif(Globals!PageNumber=2,false,true)
If you still have any problem, please feel free to ask.
Regars,
Vicky Liu
Vicky Liu
TechNet Community Support

How to Show Clob File in Report 6I ?

Hi i want to know how to show clob file in report 6i
Regards
Shahzaib ismail

In this situation I do not use headers at all. Insted of that I use union in a query :
select 'Firstname','Salary'
from dual
union all
select firstname, to_char(salary)
from employee;
The first record will work as header
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Suneel Vishwakarma ([email protected]):
Hello,
I want to generate excel format of my report. I did it using Delimited option but it was not same as it appears in my browser if I choose html format.all the labels repeat with each instance of the row .
Can you please give me the proper Solution.How should I proceed?
Thanks & Regds.
Suneel<HR></BLOCKQUOTE>
null

How to use the chart option in bex analyzer

Hi Expert
i want to know how to use the Chart in Bex Analyzer.
Next week i hve End user Training. my user wanthow to use the chart option in Analyzer.
plz let me know how to use chart & any Document on that plz reply me.
Reagards
siva
Edited by: patel siva on Sep 16, 2008 4:34 PM

Check here:
https://reporting.uky.edu/BWBExContextMenu.pdf
http://help.sap.com/saphelp_nw70/helpdata/EN/8b/4ffd9b07474279b3bbee75a60db41f/content.htm
http://help.sap.com/erp2005_ehp_03/helpdata/EN/5b/30d43b0527a17be10000000a114084/frameset.htm
Thanks..
Shambhu

Need to place a variable value at the end of report heading in BI 7

Dear All,
We have to place a variable value at the end of the report heading and the value should get refreshed whenever we change the variable by using "Change Variable Value". I have created a macro and the value will get triggered unless and until we click on any where on a sheet. But, we want to automate this one by using a macro.
Ex: Quarterly TA Host Country Details As Of "Variable Date" Variable is created on TA Date characteristic. User can enter date on Pop up window box at the time of changing a variable TA Date. We need changed date at the end of the Report heading Qua----
Please suggest me on how to place variable value at the end of report heading by using a macro.

No need to use Macro. You can use text variable.
Goto the Query Description and click on the Text variable icon.
Create a text variable of processing type as REPLACEMENT PATH and replace it with the characteristic for which you have a ready for input variable that will be eneter by the user.
This will populate the text variable with the value entered by teh user.
Use this text variabkle along with the Query Description. So your description will look something like REPORT_TITLE&TXT_VAR&
Hope this helps.

How to show the login user Id in the upper right corner of each page?

Hi,
I was wondering how to show the login user Id in the upper right corner of each page?
thanks so much!
cchu

Cchu,
The easy question first: applying a style to the welcome message. If you look at the page source, you'll see that #WELCOME_USER# is expanded to <div class="app-user">Welcome: DEMO</div> So to change the style of the message, you need to tweak the style of the app-user div in your CSS, or override it in a style block in your HTML header.
Now, the tougher question: why the text is wrapping for you. And, really, without seeing your entire page, I can't give a full answer. But I'd suggest that what's most likely happening is that the table column you're putting it in is too narrow, so it's wrapping; try replacing the td tag with <td nowrap="nowrap"> This will force the column to be wide enough to display the full message, but might result in weird formatting elsewhere on the page (depending on what all is in your table).
-David

How to control the permission for reports in share folder?

Hi Experts,
In OBIEE 11.1.1.6.0.
I have created two folders in share folder,one is sales folder which contains some sales reports,and the other is dashboard folder which contains some dashboard pages that have these sales reports.
So I want to new users who do not access the sales folder, but can view the sales reports in dashboard pages.
How to control the permission for reports in share folder? Thanks for your help.
Note: Dashboard pages have whole sales reports for showing.

Hi User,
1. Give access to the users for all reports.
2. Give No Access to Retail Folder
3. GIve read or full access to dashboard folder.
To set the permission , click on the object/folder bottom left you will find Permission. you set there.
Mark if correct,
fiaz

How to show the message text for constraint violations

Hi all,
In a batch procedure a primary key is violated (ORA-00001). For the primary key, a message is recorded in the TAPI and the message table.
How to show the enduser a proper message text instead of the ORA-00001.
We are using Designer 6 with Headstart 2.1.2.
Thanks in advance,
Joep

Joep,
If you try to insert the record by calling the ins procedure of the Table API, you will see that it will result in an ORA-20998 message, which means that the error message details reside in the CG$ERRORS plsql message table. These messages can be extracted e.g. with the messages.sql script, shipped with headstart.
If you do not want to rewrite your direct DML (insert into [table name] ...) in the complexer calls to the TAPI services, you might want to user VAPI's for it. In fact, this is one of the major advantages of using VAPI's.
The CDM guidelines volume, chapter 6 states that:
<I>The front end no longer needs to trap declarative constraint
errors (Primary Key, Unique Key, Not Null and Check
Constraint violations) and replace them with a user-friendly
error. The View API issues DML statements through the TAPI
and the TAPI traps all declarative constraint errors, and puts
user-friendly message on the stack, in the preferred language of
the user! Fore more information, see the section, Completeness
of Rule Violations Reported in Front End, in this chapter.</I>
So the only thing you need to do is generate VAPI's, and trap the ORA-20998 message (qms$errors.qms$exception) in an exception handler, where you retrieve the user friendly messages from the message stack!!
Regards, Marc

How to show the drill path in the analysis

Dear Experts:
I encountered this problem when designing OBIEE dashboard:
I'm using OBIEE 11g.
I ceated a new analysis and made it to show in pie chart view.
It works fine regarts to the drill function, when I click a part of it, it automatically change to the drilled down level figure.
Whant I want to know is how to show the current level after serveral times of drilling down and drilling up.
I know that I can judge the level base on the legend or move the curs over the chart.
But to a new user, is it possible to create a variable or something above/below the chart to actively show the name of current level?
Thank you very much.
Edited by: 906129 on Jan 5, 2012 5:40 PM

How could it not be 5A?. If you have A for each member and then you select 5 members you are going to get 5A. If you don't want 5A then what do you want the Avg of A across the 5 members?
The tools are working the way they are designed to, your requirement is a little out of the ordinary. Unfortunately, Web Analysis does not have conditional logic.
Try taking my previous suggestion and adding another member in Essbase called "Count", make it dynamic calc and the formula should be ' 1; '
The purpose here is to get a value of one in the count member for each member you are going to select in your filter. So, if you select five members in the filter, Web Analysis will now return 5A and it will return the result of "Count" which will be 5. Create a calculated member that divides the 5A value by the count value 5. That will give you the average A for the 5 members, then you can divide by 12.

How to read the Variance Analysis report S_ALR_87013139, Pdt cost by Order

Hi,
Could someone tell me how to read the variance analysis report, S_ALR_87013139 - Cumulative for product cost by order. The report has the following fields, Target (Debits),     Actual (Debits),     Scrap,     Var. Without Scrap,     Work in Process(WIP),     Control Costs.
I am looking to find how the numbers add up.
Thanks for your help.
Ram
Message was edited by:
        Ram R

Thanks Sridhar,
When I analyse the report S_ALR_87013139 - Cumulative , for a product for a period (with no scrap), I get the following
Target (Deb) -   46,855.55
Act (Deb) - 58,315.87
Scrap - 0.00
Var W/O- Scrap - 11,269
WIP- 0
Control Cost - 0
Here Actual - Target is not equal to Variance. What could be the issue?
Could you please tell me how SAP would update this report with target & actual costs with respect to open production orders, carried over from previous periods.
Thanks,
Ram

How to show the quantity in decimal in MIGO

Dear expert,
How to show the quantity in decimal in MIGO?? for example in material BOM the quantity is 12.480 but the quantity in MIGO is 13. it's automatically rounded.
what should I do to show the decimal point in MIGO?
Thanks
Pauline

Hi,
    Please check in su3 -
defaults (Tab) -
Decimal Notation.
    Change the decimal notation and logoff and login to apply the changes.
    I think it may help you.
Regards
Sreedhar Reddy

How to restrict the display of report variants

Hello All,
I want t know how to restrict the display of report variants.
I mean, when a user saves a variant for his/her purpuse on some report program, only he/she can refer the variant while other users cannot.
I know that by setting the attribute of the variant ("Protect Variant ", "Only Display in Catalog"), this would be possible, but I want to know another way, without this setting.
Thank you for your help in advance.
Regards,

Hi,
Can you just try this
DATA:it_varid TYPE TABLE OF varid.
DATA:wa_varid TYPE varid.
INITIALIZATION.
SELECT * FROM varid INTO TABLE it_varid
      WHERE report = sy-repid
      and ename = sy-uname.
IF sy-subrc = 0.
    LOOP AT it_varid INTO wa_varid .
      CALL FUNCTION 'RS_SUPPORT_SELECTIONS'
        EXPORTING
          report               = sy-repid
          variant              = wa_varid-variant
        EXCEPTIONS
          variant_not_existent = 1
          variant_obsolete     = 2
          OTHERS               = 3.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    ENDLOOP.
ENDIF.

How to show the chart(of report header) in drill down tab

Similar Messages

Maybe you are looking for