How to simulate a cmos transmission gate (using nmos/pmos transistors)

I am using Multisim student version 10.1. I am trying to simulate/create a CMOS transmission gate (t-gate) using n- and p-channel mosfets. Simply connecting the drains and sources together of the virtual or manufacture specific components does not work .

Here is a link I found that may help:
http://electron1.eng.kuniv.edu.kw/434/exp13%5CPass%20Transistor%20and%20transmission%20gate%20logic....
Tien P.
National Instruments

Similar Messages

How to simulate a DAQ device and use it for testing applications without hardware???

how do i simulate a DAQ device
in MAX and use it for testing applications without hardware???
If my application requires inputs
from external hardware to proceed how can I simulate a DAQ device in LabVEIW?
i need to simulate several Digital inputs and Outputs to test the software. currently i dont have the hardware and DAQ device here.
please reply with your valuable suggestions.
many thanks in advance
RENN
Kudos always welcome for helpful posts
Solved!
Go to Solution.

Hi,
There is no option to simulate traditional device.You need hardware for that so i would suggest to simulate a PXI device which has similar configuration to PCI-6014 and to do a small modification to your application..

How to simulate discrete fourier transform using CMOS on multisim11.0

Please tell me how to simulate discrete fourier transform(DFT) using CMOS implementation in Multisim 11.0..

vlsi,
If I am reading your question correctly, I think this is more of an issue of IC design rather than how to use Multisim (the circuit you describe is likely very complex and would involve many CMOS/transistor components). If you have an existing or partial circuit already ready to start with, the group could better assist with how to implement or use in Multisim for simulation. Although it is possible to model a comlex digital parts with CMOS equivalent logic and gates, most of the more complex digital parts in Multisim are modeled in XSPICE, which allows the behavior to be described by a truth table and timing descriptions and the pins are modeled in SPICE.
However if you want to use a predefined DFT algorithm inline within a circuit simulation, you can likely use with a custom LabVIEW VI, we have several Fourier Transfer algorithms in which you could process a signal coming from a circuit simulation in which the transform and simulation could be run together.
http://zone.ni.com/reference/en-XX/help/371361B-01/lvanlsconcepts/discrete_fourier_transform/
There is an example of how this can be done with an FFT (which is a type of DFT)
https://decibel.ni.com/content/docs/DOC-7438
Another idea is to use our co-simulation technology in Multisim v12 together with the LabVIEW Control Design tools. The LabVIEW Control Design package has several discrete signal processing algorithms built in and you could use them together for very precise mixed signal co-simulation between an electrical simulation and a discrete processing algorithm.
http://www.ni.com/white-paper/13663/en
Regards,
Pat N

How to generate a delayed retriggerable pulse using only one counter with PXI 6070E card

Hi
I have a problem in generating a retriggerable delayed pulse with a single counter(triggered through a signal at gate) using PXI 6070E card. VI was developed in NI LabVIEW traditional DAQ Ver.7.1. I have used the "delayed pulse generator config" VI and a "Start counter" & "Stop counter" VIs for the purpose. But there is no output seen at the out terminal of counter. So I introduced a "wait" VI and set it to 1 sec. Now the pulse output appears but some pulses are missing mometarily after every 1 sec interval. (any solution for this)
I have gone through a few similar requests in the forum but they suggest either to use two counters or to generate a finite pulse train which does'nt fit my application. Moreover PXI 6070E has only 2 counter timers. I am already using one counter to measure the frequency of a pulse train(signal 1). The application requires to generate a delayed retriggerable pulse for every pulse in signal 1. So I have only one counter left.
Can I measure the frequency of signal 1 by analog means.? so that I can use two counters for pulse generation. (Signal 1 is a TTL signal).
Request some help.
Thanks in Advance
Regards

A finite pulse train (N_Pulses >= 2) does require the use of 2 counters on most of our older hardware including your 6070E. If you're just talking about generating a single retriggerable pulse, you would only need one counter.
Here's an example in Traditional DAQ that shows you how to set a retriggerable pulse generation (it also allows you to adjust the characteristics of the pulse on-the-fly).
If you're writing a new program, you might consider switching to DAQmx as it supports NI's latest hardware and recent OSes should you ever need to upgrade. Traditional NI DAQ is no longer in active development. Here's an example of how to implement a retriggerable pulse generation in DAQmx. You should take note that you can't use the two drivers to simultaneously talk to the same piece of hardware, although you should be able to go back and forth by resetting the Traditional DAQ driver before switching to DAQmx.
Best Regards,
John Passiak

DBMS_DATAPUMP - how to simulate commit=N ?

Hi,
I am writing a PL/SQL procedure to export/import data from any database. Concerning the import part, how to simulate using DBMS_DATAPUMP api the command line option COMMIT=N?
Our environment is Oracle 10.2.4 EE.
Thanks for your help,
Cyryl

Hi,
I don't think you can use commit with data pump. COMMIT is an option with standard import (imp), not an option with datapump, hence not available in DBMS_DATAPUMP. You should remember that standard import uses simple INSERT statement to insert the data into the table during import, but, data pump is entirely different.
Salman

How to simulate HOST command from DB Procedure

Hi,
I'm using Oracle 9.2 database on Win2000 PC.
I need to start .bat file from a database procedure. More generaly how to simulate HOST command that I'm using from Forms6i.
Thanks,

Thanks for the reply,
But, I am able to successffuly execute HOST from SQL+
only from the PC where the database is, not from the client. My .bat file is on the server side.
From the procedure I was not able to run it in either cases
Procedure TEST
IS
BEGIN
EXECUTE IMMEDIATE 'host C:\MYBATCHFILE.BAT'
END;
returns ORA-00900 INVALID SQL STATMENT
with EXECUTE IMMEDIATE '$ C:\MYBATCHFILE.BAT' returns Invalid Character Error.
BR,

How to simulate the escalation process

Hi All,
Can somebody tell me how to simulate the escalation process in service?I need to know whether all configuration in my system has done or not done yet....
In my system if there's a problem in customer system for more than 7 hour, then system will detect the problem and send an sms/email to the person responsible in some level (ex: level 1 for SLG 95%), if the customer system still have a problem for more than 10 hour, then system will send an sms to person responsible in level 2, etc.
I want to know how can I simulate this escalation process in CRM service manually. I'm using CRM 5.0. Any helpful answer will be rewarded. Thank you.
Rgds,
Aleluya sap.

Hi Aleluya,
You can use date types which will have the times at which the trigger of mail is supposed to happen and once the current date and time is equal to say date type 1 there can be an action setup to send a mail to a particular partner function .
Also you can use status condition for controlling the mails ..
hope it helps
Cheers!
Raj

How to simulate writing in flash

Hi - I'm new to flash and just need direction to a tutorial
on how to simulate writing. Basically I want to create a flash file
that has wording appear like someone's typing or handwriting it.
I'm an editor by trade and not completely green to FX, but
completely green to flash.
So if anyone knows of a good place to look that'd be cool.
THANKS!

Handwriting is much more difficult than typing. If you can
get away with typing you can either just cover each letter of your
sentance then "uncover" each letter in each frame to achieve the
look of typing or buy a cheap program like:
http://www.swishzone.com/index.php?area=products&product=max
and have the animation done for you. And, no I don't work for
them but I do use that program to make my life much easier when
people ask me to do cheesy effects they have seen on the web and
would take me a long time to animate without the program.
-Cheers

How to simulate server 2012+clients connetion in virtualbox without internet connection

Hi, I am new to this forum and also not familiar with simulation in virtualbox. I want to know how to simulate server 2012+clients connection in virtualbox without internet connection. I couldn't join the client computer (windows 7 installed) to
the domain (the windows server 2012). I already added the DHCP , AD DS and DNS roles features in the windows server 2012. Can someone put me through?

If you're using VirtualBox you might be better off asking this over on their forum
https://forums.virtualbox.org/, since it's not a Microsoft product. That said I have used it myself, and I think what you need is to ensure you're using the Internal Networking option
http://www.virtualbox.org/manual/ch06.html#network_internal and make sure that both virtual machines have their network card setup with the same name / network ID. Once that's done you
can configure them on the same network range and they should be able to communicate.

How to simulate cRIO

Hello,
I'm trying to find out how to simulate cRIO in LabVIEW. I found another thread about this, but I am using the cRIO just as a chassis/DAQ not the FPGA or RTOS, basically just like a cDAQ. I've downloaded and installed NI-RIO, but when I go into MAX to set up a Simulated NI-DAQmx device, I have no option for cRIO, I see cDAQ there. I need to set up with a cRIO-9074 chassis
much thanks!

Hello Monse,
That is correct- a RIO is a completely separate standalone device with its own OS that you can cross-compile code for and deploy to (and then communicate with once running). DAQ devices are tethered and controlled by the DAQmx driver on the local machine and can be simulated via this driver. You can certainly develop code without the physical RIO present- just add the model to a LabVIEW project and add the modules you intend to use to the chassis. All of your variables will be present, you just won't be able to deploy the hardware configuration or interface with the RIO. Most RT code can be run on Windows (to validate logic, if not timing), and the FPGA can be simulated, so you should be able to get pretty far without a physical controller.
How do you intend to use the RIO? What aspect of the hardware do you need to simulate for code development? It sounds as though your end goal is to access Scan Engine variables without deploying any RT code or configuring the FPGA at all, is that correct? If this is the case, then all you would need to do to simulate these channels would be to deploy equivalent Network-Published Shared Variables for testing and then re-link the deployed libraries once you have the hardware.
I hope that's helpful- if you could specify what in particular you are trying to achieve at this time (end result and what you are trying to achieve via simulation right now) as well as why you chose this hardware platform, I and others on the forum may be able to offer more specific advice.
Regards,
Tom L.

How to simulate ModelState.IsValid in C# winform application for any model validation

in asp.net mvc the people validate model this below way
using System;
using System.Data.Entity;
using System.ComponentModel.DataAnnotations;
namespace MvcMovie.Models {
public class Movie {
public int ID { get; set; }
[Required]
public string Title { get; set; }
[DataType(DataType.Date)]
public DateTime ReleaseDate { get; set; }
[Required]
public string Genre { get; set; }
[Range(1, 100)]
[DataType(DataType.Currency)]
public decimal Price { get; set; }
[StringLength(5)]
public string Rating { get; set; }
public class MovieDBContext : DbContext {
public DbSet<Movie> Movies { get; set; }
if (ModelState.IsValid)
db.Movies.Add(movie);
db.SaveChanges();
return RedirectToAction("Index");
now guide me how could do the model validation same way in any c# win and webform application ? guide me in details. thanks

this question has been cross posted to forums.asp.net and to stackoverflow:
"How to simulate ModelState.IsValid
in any application for any model validation"
"How
to simulate ModelState.IsValid in C# winform application for any model validation"
Gerry (Lowry) Ability Business Computer Services ~~ Because it's your Business, our Experience Counts!

How to simulate a web server in a PC

Hai, I new to javaservlet.
I don't know How to simulate a web server in a PC
so my PC can run a javaservlet without must to upload to server(like win98 PWS personal web server).
Which software I needed and can simulate a web server so my server side applet can run in my PC (without connected to the internet)?
Thanks for advice
Yonscun

Download the tomcat server from
http://jakarta.apache.org/site/binindex.html
This is what I use for servlet development.
Either that or develop your application within Sun One Studio or another IDE which has the facility to run your servlet.

How to reset my cmos password for probook 4310s

how to reset my cmos password for probook 4310s p/n vc161ea#ar2

Reset Password using Recovery HD
OS X 10.7 Lion /10.8 Mountain Lion
Follow the instructions in the first and third boxes.
http://pondini.org/OSX/Password.html

Compare PDF: How to simulate ENTER Key programmatically to suppress the dialog box.

Hi,
We are using Acrobat 8.0. Using Visual Basic, we are opening two PDF files in Acrobat 8.0 professional.We are comparing those two documents using MenuitemExecute(DIGSIG:CompareDocuments ) command and generating the side by side comparison file programatically.
During this process after executing the command "MenuitemExecute(DIGSIG:CompareDocuments )" adobe is displaying "Compare Documents" dialog box where the user need to click OK on it in order to continue with the comparison.
My requirement is to suppress the dialog box and automate the process. Our application is developed in Visual basic.
Could you please let me know how to suppress the dialog box using Visual basic. Is it possible using VB or any alternatives for this. Because we need to compare many PDF documents so clicking OK every time requires user intervention.
Thanks for your help in advance.

I did not say that AVCommand simulates pressing enter - it is used to automated methods by pre-filling options and not showing the dialogs. Please read the documentation on the AVCommand methods.
You should also note that I said AVCommand is only available to plug-ins, which means it will not work with a VB.NET application.
SendKeys is a basic VB.NET command, it is not part of the Acrobat SDK in any way. Here is Microsoft's documentation on SendKeys. Again I will state that using this method is NOT a good idea for a production environment.
http://msdn.microsoft.com/en-us/library/8c6yea83(VS.85).aspx

HT201248 My email address associated with my Apple ID on my iPad has been turned off from the ISp (U.S. army). I have a new gmail account with a new Apple ID. How do I get my iPad to use my gmail account?

Help. My old @us.army.mil email address was terminated by the army. I used that address to register my first apple id account on my iPad. I can't remember my original Apple ID number and if I ask to reset my password, Apple sends the reset link to my old non-working email address. I have a new gmail address and a new Apple ID number associated with that address. How do I get my iPad to use my new gmail address and new apple ID number? Remember, I can't log out of my old account because I can't remember the password. Amd Apple will only reset the password by sending a link to my old, non functioning army email account. ( I hate army webmail for canceling all retired military email accounts). John Marc
<Personal Information Edited By Host>

Hi John,
You can change the email address associated with an Apple ID using the steps in this article -
Change your Apple ID - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

How to simulate a cmos transmission gate (using nmos/pmos transistors)

Similar Messages

Maybe you are looking for