How to simulate 'Use Page style' for a portlet

All,
How do i simulate the 'use page style' feature for a custom portlet ? Currently, I have to hard code the style.
thanks

uploaded gif under mime repository

Similar Messages

How can i use page break for every 5 records in sap scripts

on every 5 lines of records i have go for a new page so what is procedure to do this .if possible send me with coding .

Hi John..
this is the way..
IN THE PRINT PROGRAM...
DATA : V_MOD TYPE I.
loop at Itab.
   V_MOD = SY-TABIX / 5.
   IF V_MOD = 0.
       CALL FUNCTION 'CONTROL_FORM'
       EXPORTING'
          COMMAND = 'NEW-PAGE' .
ENDIF.
         CALL FUNCTION 'WRITE_FORM'
ENDLOOP.
<b>reward if Helpful.</b>

Repost:Use Page style feature for portlet

All,
How do i simulate the 'use page style' feature for a custom portlet ? Currently, I have to hard code the style.
thanks

The following is from one of the sample portlets (comments incl):
Display the content of the portlet in the show mode.
Use the wwui_api_portlet.portlet_text() API when generating the content of the portlet so that the output uses the portlet CSS.
htp.p(wwui_api_portlet.portlet_text(
p_string => 'Hello World - Mode Show'
,p_level => 1
I assume this is what you are looking for--the level would be the Portlet Text level, and you could substitute a parameter.
HTH!

How to use inline style for hover, visited

I am trying to use inline styles for a hover effect or a
visited. I know how to do it using a style sheet but not inline.
Is it possible to do this?

That's OK. The chances were 1 in 2 you'd be right. It's
better than buying
yourself a lottery ticket....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Walt F. Schaefer" <[email protected]> wrote in
message
news:gf2c8o$h0c$[email protected]..
> Whoops!
>
> :-(
>
> --
>
> Walt
>
>
> "Murray *ACE*" <[email protected]>
wrote in message
> news:gf29m1$dr7$[email protected]..
>> Nope, not possible using inline styles.
>>
>> --
>> Murray --- ICQ 71997575
>> Adobe Community Expert
>> (If you *MUST* email me, don't LAUGH when you do
so!)
>> ==================
>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>> ==================
>>
>>
>> "Walt F. Schaefer" <[email protected]>
wrote in message
>> news:gf26t4$aa5$[email protected]..
>>>> Is it possible to do this?
>>> Sure. Show us what you've tried (a link to an
uploaded file is best) and
>>> we'll see why it doesn't work.
>>> --
>>>
>>> Walt
>>>
>>>
>>> "craigmini" <[email protected]>
wrote in message
>>> news:gf25ul$98a$[email protected]..
>>>>I am trying to use inline styles for a hover
effect or a visited. I know
>>>>how to do it using a style sheet but not
inline.
>>>> Is it possible to do this?
>>>
>>>
>>
>
>

How can I use jbo:InputSelect for a char type filed?

How can I use <jbo:InputSelect for a char type filed?
I have two tables. One is room (primary key is room(type is char)), another table is responsibility (foreign ker is room(type is char)). Both tables have same length for room column.
There is a problem:
If I use (in the "DataEditComponent.jsp" file)
<jbo:InputSelect multiple="false" datasource="dsEdit" displaydatasource="roomData" displaydataitem="ROOM" displayvaluedataitem="ROOM" ></jbo:InputSelect>
to get the room input for responsibility from combobox(Datasource roomData is from room table). In the form the room field cannot bind the data in combobox, alway select the first item. And if I select one item and click the update button.There is an error message:
Error Message: JBO-27010: Attribute set with value H409 for Room in Responsibility has invalid precision/scale
I found If I changed the field type from char to varchar2 in database also change the entity objects, it works well. I wonder if there are any diffrence using <jbo:InputSelect tag in char and varchar2 type. How can I use <jbo:InputSelect for a char type filed as i don't want to change my datatype in database at this stage.
I try this in JDeveloper 9.03, 9.034, 9.04. The result is the same.

If I were in your shoes, here's how I would do it:
<%-- Assuming you have dsRoom and dsResponsibility --%>
<%-- Select is an HTML tag --%>
<select name="ROOM" size="1">
<% char roomID =""; // Init your character var
// Open a rowsetIterator to get the records and add them to the LOV
<jbo:RowsetIterate datasource="dsResponsibility" changecurrentrow="true" >
<% roomID = (char)dsResponsibility.getRowSet().getCurrentRow().getAttribute("ROOM"); // Grab the char value
// add the value to the LOV
%>
<option value="<%=roomID%>"><%=roomID%></option>
</jbo:RowsetIterate>
</select>
If you are using this as part of an edit page you may want to utilize the "selected" option of the <option> tag. In one instance I am doing this on an edit page because the use may open an existing record. If I don't account for it, then it will change the DB to contain the first value from the list! You can do a simple check like:
//Set the current record's char
char curRecord = (char)rowEdit.getAttribute("ROOM");
// inside the iterate:
if (curRecord == roomID) {
<option value="<%=roomID%>" selected><%=roomID%></option>
} else {
<option value="<%=roomID%>" ><%=roomID%></option>
Hope that helps!

How to effectively use Character Styles

Hello, I am fairly new to InDesign, but have an extensive background with FrameMaker. I am having trouble figuring out how to best use character styles in ID, because of the difference between it and FM.
Lets say I have two different body text styles, which use different fonts or different sizes, each of which is saved as a paragraph style.
In Framemaker, when you go into the Character Style editor, for each value you can select the value "As Is". So if I want to make a Bold character style, I leave the font and size attributes set to "As Is" and I change only the weight attribute to Bold.
Now, I can select either Body Text 1 or Body Text 2 for the paragraph style and if I want to bold a word, I just highlight that word and select the Bold character style. The text is bolded but everything else that is unique to that paragraph style remains. If I ever need to unbold the word, I can just select it and then select No Style from the Character Style catalog
But in ID, it looks like you have to define the value for each attribute in the Character Style editor. So I would need to create two separate bold styles, one for each paragraph style, because if I define the font and size, it will switch those values as well as the weight. And if I need to create a separate Bold Character style for each paragraph style in which the default font is not bolded, what is the advantage of using character styles? Why not simply highlight the text and select the bold value from the Character palette, which then modifies the paragraph style just for those words that you bolded?

Thanks,
I was looking at some existing documents, which I think were created by folks who didn't know what they were doing (I am new to this job and all of the previous folks doing what I do are gone - and they clearly did not understand how to properly use styles). All of the fields had values in them, and when I didn't see an "As Is" value, it never occurred to me that I could just highlight the value and delete it to get rid of it.
When you use a bunch of different Adobe products, even though they have fairly similar user interfaces, it is those differences that really get you.....
Thanks, again

Using Global Style for DatagridHeader and DataGridColumn

Can someone tell me how to apply Globalstyles for the datagrid header and datagrid columns.
I placed css styles in my lib project in defaults.css (as followed in adobe material).
I am refering this style in my projects in datagrid headers headerStyleName="SomeStyleNamefromCSS". Similarly how should I specify the styles for DataGridColumn in a Global CSS file (defults.css).Because I dont want to set style seperately in all of my projects.
Also does the DatagridColumns inherit the styles from headerStyle of the Datagrid and how to deal with it in CSS files. I am using Flex 4.1
Any suggestions on this is very much appreciated

The headers pick up styles from headerStyleName, but the renderers don't.
Anything set on the DG should get picked up by all headers and renderers,
but you can also make a custom renderer and a type selector for it.

HT204053 Dear Support Team, every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud???

Dear Support Team,
Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
Thanks

It is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.

How do I use the VIs for the Fluke Hydra Series 2620a multimeter?

This message refers to the VIs found at this link:
http://sine.ni.com/apps/we/niid_web_display.download_page?p_id_guid=E3B19B3E9468659CE034080020E74861
How do I use the VIs for the Fluke Hydra Series 2620a multimeter? I am conducting a Senior Design Project at Temple University. It is a Control System where I need to read voltages from sensors and output voltages to different system components. I am trying to set up a VI using the VIs found above to make sure that I can successfully read and send voltages. There was no documentation given with the 2620a VIs.

Unfortunately, you've got a very old driver for an old instrument. The only available help is to turn on Context Help and move your mouse over the VI icon. It doesn't appear to have any help for individual controls and indicators. The only good news is that it appears to be a simple instrument with only a few functions. There's some main ones line initialize (to set serial port), configure channel, configure instr, and read values. One main thing is whether you're using gpib or serial, Each front panel has a setting. If it's gpib, set the port to the gpib address. If it's serial, set the port to one number less than the com port you're connected to. For example, if you're using Com1, set the port to 0. For the other controls, I'm afraid that you're going to have to try and compare what's there with the controls and settings of the actual instrument. Having access to the instrument manual will be essential. I would engourage you to experiment a little. There's probably very little chance of damaging the instrument especially if nothing is hooked up to it. Send a command and see what happens or set the instrument up manually and see if you can reproduce that via remote control.

How do i use MIB-2 for writing MIB for my application?

I want to use the existing MIB-2 to write MIB variable for my application. The application is energy metering.So How do i use MIB-2 for writing MIBs for my application?
Santosh Chavan
IIT MADRAS.

For others who do not know what an MIB is, here is link that shows some more information:
http://www.cisco.com/univercd/cc/td/doc/cisintwk/ito_doc/snmp.htm . A quick Google of MIB did not turn up any useful information, but looking for SNMP quickly found this link.
It really turns out that I am not the person to help.
It turns out that I am not the person to help, but I always want to know more as I may have a similar problem later. I know from personal experience that it is easy to use a term commonly in a company or industry but have no one out side of that industry understand. I was asking if that was such a term (hopefully with a little humor). I'm sorry if my joke fell flat.
I hope that you get an answer,
Bob Young
Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
DISTek Integration, Inc. - NI Alliance Member
mailto:[email protected]

How do i use appl id for my phone?

how do i use appl id for my phone?

Sign into the device with the Apple ID.
Reading the User's Guide might also allow you to ask a more intelligent question and have a much better understanding of how the device works.

How do i use my number for imessaging instead of my email

how do i use my number for imessage instead of email

Hello there, qbullard.
The following Knowledge Base article reviews the process for adding your number to iMessage:
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

How do i use parallel compression for 4 drum tracks in Logic pro 7.2.3 Please

how do i use parallel compression for 4 drum tracks in Logic pro 7.2.3 Please. my version is 7.2.3 and my son did his drums on 4 tracks. 2 OH's 1 Kick and 1 Snare. Were confused because we cant figure out how to do parallel compression on the older logic version 7.2.3?

I can't remember when the Aux tracks became the new buss tracks, so I'll spell this out using busses.
The way I do it, is I assign all my drum tracks to a buss, say buss 1.
Then, on buss 2, I assign it's INPUT to buss 1.
So buss 1 (all the drums) are feeding into buss 2 simultaneously.
Put a compressor on buss 2, turn the fader down all the way, then as the track is playing, bring buss 2's fader up slowly, until you hear the effect you're after.
You could also do this using sends on the 4 drum tracks, set to feed the buss with the compressor on it.
I hope I haven't forgotten anything particular to that version of Logic. See if this helps...

HT3354 how can i use one table for reference to another

how can i use a table for a referance to another eg when i type a word in a cell, i will like it to match the word with another table then return the information in the cell i am using

you can use vlookup() (or any of the lookup family of functions) to locate an item based on a key value:
Here is an example of something you can do with two tables:
The table on the right is title "Data" and stores a list of names with age and favorite color.
The table on the left uses the value in the first column to lookup up information in the table Data
in the table on the left:
B2=IFERROR(A2&" is " & VLOOKUP(A2, Data :: A:D, 2, 0)&" years old and likes the color "& VLOOKUP(A2, Data :: A:D, 3, 0), "NOT FOUND")
I know this look complicated. so I'll break it up into smalled pieces:
first the "&" is called the concatenate operator and joins two strings. like this:
a string is a set of characters between double quotes.
so "string 1" & "string 2" becomes "string 1string2" or "Sam " & "Jones" becomes "Sam Jones"
you can use cell references instead of strings directly in which case the concatenation is performed on the contents of the cells.
so if cell A1 contains "Hi " and the cell A2 contains "There" then A1 & A2 will result in "Hi There"
so you could add the formula
A3=A1 & A2
this is short hand for select cell A3 then type everything including the A3 so that A3 contains "=A1 & A2" (omit the double quote)
OK. So the formula I provided concatenates several items together:
it concatenates A2, then the string " is " then a formula, then the string " years old and likes the color " then a formula
the two formulas (highlighted in blue) perform a lookup of the value in cell A2 in columns A thru D of the table named "Data". If if finds the value in cell A2 in the first column of the lookup range in the table Data (column A) then it returns the value from the same row but in the second or third column.
all that is in a function calld iserror() to trap the condition where the calue you enter in A2 does not exist in the table Data:
You will find the Numbers users guide and function reference helpful. You can download then from Apple here:
http://support.apple.com/manuals/#productivitysoftware

How to create a page-definition for bounded task-flow?

I should be able to create a page definition which declare all bindings required for a bounded task flow.
How do I do it in JDeveloper 11.1.1.2?
How do I navigate to the page definition when I am in the bounded task flow "Diagram tab"?

I found out the following:
1. To create a page-definition file for a bounded task flow
Right click on the "Default" activity (not a view activity) of the bounded task flow, select "Create Page Definition" from the context menu.
2. To go the page-definition file for a bounded task flow
Right click on the "Default" activity (not a view activity) of the bounded task flow, select "Go to Page Definition" from the context menu.
My new question is:
In JDeveloper 11.1.1.2, how do I create page-definition for a bounded-task-flow if all activities are view activities (page fragments) ?
How does JDeveloper I want to create page-definition for the task-flow instead of create page-definition of the page fragment or the page?

How to simulate 'Use Page style' for a portlet

Similar Messages

Maybe you are looking for