How to solve conflict errors using Test stand 4.1

Hi,
I am using Test stand 4.1. Previoulsy I was using test stand 4.0. When I am trying to open the sequences saved in 4.0 in 4.1 they are giving some conflict errors. So now my problem is if I have a big main sequence in which I have many more child sequences then I was required to open all the sequences that being called in the main sequence save it and close.
One thing I found is that if once I opened and saved all the child sequences present in the main sequence then it will run fine. i.e. once I clear the conflict error with all sequences, this data is stored in the station globals. If change this again I will be required to do the same job.
This is costing me a lot of time.
Please help me in avoiding this conflict error.

NI Labs has a utility that I have used to check for type confilcts.  Check it out...
NI TestStand Toolkit for Large Application Development
http://www.ni.com/labs/

Similar Messages

  • How to solve this error using OSX Server's bots

    Plz help me.
    My remote repository is SVN version controll system.
    when I started integration using bot in OSX Server. this error was pisplayed on a log.
    how to solve this error to integrate my project using OSX Server.
    Apr  3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildBundle.m:466 77537310 +61ms] Will NOT send email notifications because notifyCommitterOnFailure is NO Apr  3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildBundle.m:470 77537310 +0ms] Posting email notification for bot run with type com.apple.notifications.BotFailed Apr  3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildBundle.m:471 77537310 +0ms] Sending email to committers = (null) Apr  3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildBundle.m:1033 77537310 +0ms] Posting notification of type com.apple.notifications.BotFailed Apr  3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildHelper.m:199 77537310 +0ms] Posting notification for bot run GUID f87f0098-f8ca-4bfa-945e-cbb11a2f6abb of type com.apple.notifications.BotFailed Apr  3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Info>: [CSRemoteServiceClient.m:151 77537310 +0ms] Connecting to https://localhost:4443/svc to execute [https]Request{AuthService.enterMagicalAuthRealm()} Apr  3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Info>: [CSRemoteServiceClient.m:151 77537310 +45ms] Connecting to https://localhost:4443/svc to execute [https]Request{XCBotService.postNotificationForBotGUID:andRunGUID:andNotificati onType:additionalEmails:(c6189ca0-0649-0649-c01e-81c4d0b52dd9,f87f0098-f8ca-4bfa -945e-cbb11a2f6abb,com.apple.notifications.BotFailed,( ))} Apr  3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildBundle.m:601 77537310 +84ms] Deleting work queue item: cf7fe6b8-4df8-b723-4794-50fbf27955ed Apr  3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Info>: [CSRemoteServiceClient.m:151 77537310 +0ms] Connecting to https://localhost:4443/svc to execute [https]Request{XCWorkQueueService.deleteWorkQueueItemWithGUID:(cf7fe6b8-4df8-b7 23-4794-50fbf27955ed)} Apr  3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildBundle.m:929 77537310 +13ms] Marking build bundle complete with status failed and sub-status internal-checkout-error Apr  3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Info>: [CSRemoteServiceClient.m:151 77537310 +0ms] Connecting to https://localhost:4443/svc to execute [https]Request{AuthService.enterMagicalAuthRealm()} Apr  3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildHelper.m:97 77537310 +55ms] Updating bot run with GUID f87f0098-f8ca-4bfa-945e-cbb11a2f6abb Apr  3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildHelper.m:102 77537310 +0ms] Updating bot run (f87f0098-f8ca-4bfa-945e-cbb11a2f6abb): { guid = "f87f0098-f8ca-4bfa-945e-cbb11a2f6abb"; status = failed; subStatus = "internal-checkout-error"; } Apr  3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Info>: [CSRemoteServiceClient.m:151 77537310 +0ms] Connecting to https://localhost:4443/svc to execute [https]Request{XCBotService.updateBotRun:({ guid = "f87f0098-f8ca-4bfa-945e-cbb11a2f6abb"; status = failed; subStatus = "internal-checkout-error"; })} Apr  3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildHelper.m:108 77537310 +121ms] Updating bot with GUID c6189ca0-0649-0649-c01e-81c4d0b52dd9 Apr  3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildHelper.m:117 77537310 +0ms] Updating bot with latest bot run GUID key Apr  3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildHelper.m:124 77537310 +0ms] Updating bot (c6189ca0-0649-0649-c01e-81c4d0b52dd9): { guid = "c6189ca0-0649-0649-c01e-81c4d0b52dd9"; latestFailedBotRunGUID = "f87f0098-f8ca-4bfa-945e-cbb11a2f6abb"; latestRunStatus = failed; latestRunSubStatus = "internal-checkout-error"; } Apr  3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Info>: [CSRemoteServiceClient.m:151 77537310 +0ms] Connecting to https://localhost:4443/svc to execute [https]Request{XCBotService.updateBot:({ guid = "c6189ca0-0649-0649-c01e-81c4d0b52dd9"; latestFailedBotRunGUID = "f87f0098-f8ca-4bfa-945e-cbb11a2f6abb"; latestRunStatus = failed; latestRunSubStatus = "internal-checkout-error"; })}

    Hello,
    You need to make sure both names match exactly

  • When using nant i was told "excepted point(.) and coma(;)".how to solve this error

    hi
      i am using nant and for my code 
                var symmetricKey = new RijndaelManaged() { Mode = CipherMode.CBC, Padding = PaddingMode.Zeros };
              it is ok when i compile it  by visual studio,but when i use nant i was told"excepted point(.) and  coma(;)".
             how to solve this error?
          any help would be appreciated
    best regards
    martin

    anyway now i realized that since i used .Net Frame work 2.0, and i should use like this
     RijndaelManaged symmetricKey = newRijndaelManaged();
                symmetricKey.Mode = CipherMode.CBC;
                symmetricKey.Padding = PaddingMode.Zeros; and i cannot use "var" i've solved this problem and it could be helpful if some one who have the same problem

  • How to solve the error sid missing?

    how to solve the error sid missing?

    Hi,
    Loading data sometimes you get SID error inconsistencies on master data, do a combined test by using TCODE RSRV on the infoobject, fix then problem and reload data.
    Hope it useful.
    Thanks,
    Somesh.

  • How to solve this error java.util.MissingResourceException

    Hi Friends,
    I had developed one web dynpro application by using  Internationalization - I18N of WebDynPro (Java)  Application (Blog)   but I got one error that is
    <b>java.util.MissingResourceException: Can't find bundle for base name com.sap.example.language.lang, locale en_US</b> 
    Actually i created two properties file
    1. lang_en.properties
    2. lang_ta.properties
    I stored this two properties file in this package com.sap.example.language
    and this my code in DOInit()
    sessionLocale =  WDClientUser.getCurrentUser().getLocale();
    resourceHandler = ResourceBundle.getBundle("com.sap.example.language.lang",sessionLocale);
         catch (WDUMException e)
         e.printStackTrace();
         wdContext.currentContextElement().setUsername_label(resourceHandler.getString("testview.username"));
         wdContext.currentContextElement().setPassword_label(resourceHandler.getString("testview.password"));
    How to solve this error?
    Guide me.
    Advance Thanks,
    Balaji

    Hi Friends,
    I had developed one web dynpro application by using Internationalization - I18N of WebDynPro -Java Application (Blog) but I got one error that is
    <b>java.util.MissingResourceException: Can't find bundle for base name com.sap.example.language.lang, locale en_US</b>
    Actually i created two properties file
    1. lang_en.properties
    2. lang_ta.properties
    I stored this two properties file in this package com.sap.example.language
    and this my code in DOInit()
    sessionLocale = WDClientUser.getCurrentUser().getLocale();
    resourceHandler = ResourceBundle.getBundle("com.sap.example.language.lang",sessionLocale);
    catch (WDUMException e)
    e.printStackTrace();
    wdContext.currentContextElement().setUsername_label(resourceHandler.getString("testview.username"));
    wdContext.currentContextElement().setPassword_label(resourceHandler.getString("testview.password"));
    How to solve this error?
    Guide me.
    Advance Thanks,
    Balaji

  • How to solve the Error in Action for illustrator cs3

    Through action in illustrator cs3 i changed the document mode RGB to CMYK via Visual Basic. But sometimes it throws 2 different kinds of error messages.
    CODE:
    appRef.DoScript "Change", "Convert"
    While (appRef.ActionIsRunning)
    WScript.sleep 1000
    Wend
    Error 1:
    Could not complete the Play Command because the action is playing.
    Error 2:
    The Object "Document Color Mode: CMYK Color" is not currently available.
    Could you please explain how to solve this error.

    The input data provided as the first argument to ore.tableApply and rqTableEval are physically being moved from Oracle Database to the database server R engine, and then serially operating on the entire table  The benefit to using ore.tableApply/rqTableEval in this case is the potentially greater amount of RAM on the database server.  But it's important to note that R’s memory limitations still apply in this case.
    You may have already seen the blog post on Managing Memory Limits and Configuring Exadata for Embedded R Execution where we discuss setting memory limits for the database server R engine. These suggestions can be used to load reasonably sized data tables, and you may still encounter limitations when using a very large table.
    In contrast to the "table apply" functions, the "group Eval" and "row eval (" functions are parallel-enabled embedded R execution functions. They support data-parallel execution, where one or more R engines perform the same R function, or task, on different partitions of data. The following training and blog links should be helpful in choosing the correct function for your use case:
    http://www.oracle.com/technetwork/database/database-technologies/r/r-enterprise/learnmore/ore-1-4-embedded-r-execution-s…
    http://blogs.oracle.com/R/entry/invoking_r_scripts_via_oracle1
    http://blogs.oracle.com/R/entry/invoking_r_scripts_via_oracle2
    http://blogs.oracle.com/R/entry/invoking_r_scripts_via_oracle3
    http://blogs.oracle.com/R/entry/invoking_r_scripts_via_oracle4
    http://blogs.oracle.com/R/entry/invoking_r_scripts_via_oracle5
    Sherry

  • How to solve the error 0xBFF6902B in Ni-Max??

    Hello,
    I am trying to communicate with Axis camera with Ni-vision , but I am getting the error as I mentioned.
    Here in attachment I have attached the screenshot of error.
    Would you please guide me how to solve this error.
    Thank you very much.
    Attachments:
    error.png ‏982 KB

    Hello,
    I have a camera in My robot its Axis camera and its working fine in when I connect my robot and handle with labview.
    But I am not able to detect that camera in Ni-Max as I want to develop some functionality of robot camera in Ni-IMQ.
    When I tried to connect then I Got the error Error - 1074360277 occurred at IMAQdx Open Camera.vi,
    would you please help me how to solve this problem.
    Ip address of camera also responding well.
    Please guide me what should be the possible way to solve this problem I am using labview 2012.
    Attachments:
    erro.png ‏231 KB

  • How to solve the error "The specified resource is reserved" when running with DAQmx And LabVIEW?

    How to solve the error "The specified resource is reserved" when running with DAQmx And LabVIEW?

    I hate "J term"
    OK I love the learning the students get.   And, I like helping them out!  But, as a former man who's got the varicose viens to prove he's spent time "behind the podium" (yeah, "behind the podium" puts 'em to sleep- songs and dances for the young'uns) come on! USE the tools you teach!
    Instructors invited to engage in the forums
    Jeff

  • TS3694 How to solve the error 1015?

    How to solve the error 1015?

    Use google.  You have a hacked or jailbroken phone, you can't get any help here, it's the against the forum term of use.

  • TS3694 how to solve 1015 error message

    how to solve 1015 error messege

    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
    Pull up itunes on a computer and plug the iPad cord into the USB but the the device, hold the "Sleep/Wake" button and the "Home" button at the same time and count to 8.  then let go the Sleep/Wake button BUT KEEP YOUR FINGER ON THE HOME BUTTON. while holding the home button connect the device to the cable thats plugged into the computer and keep holding the home button
    AT NO TIME SHOULD YOU LET GO OF THAT HOME BUTTON until you see the message pop up in itunes saying "iTunes has discovered your iPad in recovery mode" then just go through the screens to restore the device.
    if that message doesn't pop up after about 20 seconds, then call apple care, let them know you tried to perform the DFU mode restore (Deivce Firmware Update) and it was a no go. and ask them if you're in warranty to replace it for free.

  • HT204053 how come i was upgraded iso6 on my iPhone, but now I couldn't link up to iCloud, it keeps asking my icloud password then failed login. But my iPad upgraded it works!! how to solve my iPhone using iCloud?

    how come i was upgraded iso6 on my iPhone, but now I couldn't link up to iCloud, it keeps asking my icloud password then failed login. But my iPad upgraded it works!! how to solve my iPhone using iCloud?

    If you still have access to your old email address, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your iCloud ID.  Tap edit next to the primary email account, tap Edit, change it back to your old email account and verify it.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iPhone on your device. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  You can now go to Settings>iCloud and sign in with your correct iCloud ID and password.
    If you don't have access to your old email address, you will have to contact Apple to have them reset the password so you can disable Find My iPhone and sign into your iCloud account.  You can either go to https://expresslane.apple.com, select "More Products and Services", then "Apple ID", then  on the next page select "Other Apple ID Topics", then "Lost or forgotten Apple ID password" and click "Continue"; or you can contact Apple Support (http://www.apple.com/support/icloud/contact/).

  • How to solve the error 'please enter account assignment ' in BAPI_PO_CREATE.

    Hi gurus,
    While creating shopping cart with an  item from services type  i am getting error please enter account assignment.Please suggest me how to solve this error
    thanks&regards,
    Suneel Kumar.

    Hi Suneel,
    Are you getting while transferring the Shopping cart into ECC? Or you are getting while creating Shopping cart in SRM?
    Thank you
    Ritesh

  • How to solve the error no sid found?

    how to solve the error no sid found?

    Hi,
    The system will give you the error like this.. No SID found for value '0000030016 ' of characteristic "CUSTOMER"
    Go to Customer infosource give the selection "'0000030016" and load the master data. And then update the transaction data from PSa if not reload it.
    Assign points if helps
    Regards
    srini

  • Ajax submit failed: error = 403, forbidden----how can solve this error

    Ajax submit failed: error = 403, Forbidden--how can solve this error to create a new eprintcenter account

    I am having the SAME problem.  This is so frustrating.   If i try to log on with teh user account I already have, I get the above message.  If i try to create a new accoutn it says the account is already existing.  If i click on forgot password, nnothing happens.  HELP!  I am stuck in a loop!!

  • How to solve this error JBoss Server start time............

    How to solve this error JBoss Server start time............
    10:45:38,484 INFO [TomcatDeployer] deploy, ctxPath=/JobWorkInvoice, warUrl=.../deploy/JobWorkInvoice.war/
    10:45:38,640 ERROR [STDERR] log4j:ERROR A "org.jboss.logging.util.OnlyOnceErrorHandler" object is not assignable to a "org.apache.log4j.spi.ErrorHandler" variable.
    10:45:38,640 ERROR [STDERR] log4j:ERROR The class "org.apache.log4j.spi.ErrorHandler" was loaded by
    10:45:38,640 ERROR [STDERR] log4j:ERROR [WebappClassLoader
    delegate: false
    repositories:
    /WEB-INF/classes/
    ----------> Parent Classloader:
    java.net.FactoryURLClassLoader@d5f9b9
    ] whereas object of type
    10:45:38,640 ERROR [STDERR] log4j:ERROR "org.jboss.logging.util.OnlyOnceErrorHandler" was loaded by [org.jboss.system.server.NoAnnotationURLClassLoader@5d173].
    10:45:38,687 ERROR [STDERR] log4j:ERROR Could not create an Appender. Reported error follows.
    10:45:38,687 ERROR [STDERR] java.lang.ClassCastException: org.jboss.logging.appender.DailyRollingFileAppender
    10:45:38,687 ERROR [STDERR]      at org.apache.log4j.xml.DOMConfigurator.parseAppender(DOMConfigurator.java:174)
    10:45:38,687 ERROR [STDERR]      at org.apache.log4j.xml.DOMConfigurator.findAppenderByName(DOMConfigurator.java:149)
    10:45:38,687 ERROR [STDERR]      at org.apache.log4j.xml.DOMConfigurator.findAppenderByReference(DOMConfigurator.java:162)
    10:45:38,687 ERROR [STDERR]      at org.apache.log4j.xml.DOMConfigurator.parseChildrenOfLoggerElement(DOMConfigurator.java:424)

    The error message suggests that your system is running out of memory. How much memory is available for OC4J on this box?
    You may also see problems like these when any of the following Jar files in your classpath :
    <li>$OH/jlib/repository.jar
    <li>$OH/j2ee/home/jazn.jar
    <li>$OH/j2ee/home/oc4j.jar
    <li>$OH/j2ee/home/jazncore.jar
    <li>$OH/jlib/infratool.jar
    Thanks,
    EJ

Maybe you are looking for