How to speed up my saving and loading of a psd. file?

Hi.
My laptop's 1 TB hdd recently crashed and I replaced it with a 500 GB ssd and Photoshop loads now from 10-12 sec since i re installed Photoshop cc.
Unfortunately, the time it takes to save and load psd files has increased dramatically (I'm comparing it to how it was with my normal hdd). It also, sometimes freezes a bit and then after about 10 sec it unfreezes.
I have looked online for help, but have been unable to find anything that could really help me (or it just went over my head, as I am not very tech savvy).
Any help would be greatly appreciated.
If this has been discussed before, can someone please post the link for me.

The rule of thumb I follow to figure out scratch space says to figure on 50 to 100 times the size of your largest file ever multiplied by the number of files you have open. I have seen the scratch file exceed 800 GB once, an admittedly rare occurrence, but it often exceeds 200 GB when stitching large panoramas and the like.
As an example—and stressing that I'm aware that others have even more scratch space than I do—I keep two dedicated, physically separate hard drives as my primary and secondary Photoshop scratch disks and a lot of GB free on my boot drive for the OS. I also have 16 GB of RAM installed.
Additionally, if you only have a single HD, i.e. your boot drive, you'd need it to be large enough to accommodate both the swap files of the OS as well as Photoshop's scratch.

Similar Messages

Saving and Loading specific properties of an Image

Hey everyone. I'm currently in the process of developing a game which allows you to customize the color (hue) of your character via a slider. What I would like to happen is: Upon clicking either Accept or Play, it will save the current hue of the image, navigating back to that page will load what was previously saved (hue), as well as when starting the game, it will replace the standard graphic with the previously saved image.
Below is the code I have right now that pertains to the image with a basic non-functioning properly saving and loading code:
import flash.events.KeyboardEvent;
// open a local shared object called "myStuff", if there is no such object - create a new one
var savedstuff:SharedObject = SharedObject.getLocal("myStuff");
Accept.addEventListener(MouseEvent.CLICK, SaveData);
PlayBTN.addEventListener(MouseEvent.CLICK, LoadData);
function SaveData(MouseEvent){
           savedstuff.data.username = Sliders.Dino.MovieClip // changes var username in sharedobject
           savedstuff.flush(); // saves data on hard drive
function LoadData(event: MouseEvent)
           if(savedstuff.size>0){ // checks if there is something saved
           Sliders.Dino.MovieClip = savedstuff.data.username} // change field text to username variable
// if something was saved before, show it on start
if(savedstuff.size>0){
Sliders.Dino.MovieClip = savedstuff.data.username}
What I have above is only saving the actual image, which is inside a movie clip names Sliders.
Below is the Class I am using that associates with the slider that changes the hue of "Dino".
package
          import flash.display.Sprite;
          import fl.motion.AdjustColor;
          import flash.filters.ColorMatrixFilter;
          import fl.events.SliderEvent;
          public class Main extends Sprite
                    private var color:AdjustColor = new AdjustColor();
                    private var filter:ColorMatrixFilter;
                    public function Main():void
                              /* Required to create initial Matrix */
                              color.brightness = 0;
                              color.contrast = 0;
                              color.hue = 0;
                              color.saturation = 0;
                              /* Add Listeners function */
                              addListeners();
                    private final function addListeners():void
                              colorPanel.hueSL.addEventListener(SliderEvent.CHANGE, adjustHue);
                    private final function adjustHue(e:SliderEvent):void
                              color.hue = e.target.value;
                              update();
                    private final function update():void
                              filter = new ColorMatrixFilter(color.CalculateFinalFlatArray());
                              Dino.filters = [filter];
Overall what I'm asking for is: How do I get it to save the current hue of an image by clicking a button, and then having that previously saved image be loaded upon reloading or clicking a button? To me, it doesn't seem like it should be too hard, but for some reason I can not grasp it.
Thanks in advance for reading this and for any assistance you have to offer!

This is the Class that you told me to use:
package
          import flash.display.Sprite;
          import fl.motion.AdjustColor;
          import flash.filters.ColorMatrixFilter;
          import fl.events.SliderEvent;
          import flash.net.SharedObject;
          public class Main extends Sprite
                    private var color:AdjustColor = new AdjustColor();
                    private var filter:ColorMatrixFilter;
                    private var so:SharedObject;
                    public function Main():void
                              color.brightness = 0;
                              color.contrast = 0;
                              color.saturation = 0;
                              so = SharedObject.getLocal("myStuff");
                              if (so.data.hue)
                                        color.hue = so.data.hue;
                              else
                                        color.hue = 0;
                              update();
                              addListeners();
                    private final function addListeners():void
                              colorPanel.hueSL.addEventListener(SliderEvent.CHANGE, adjustHue);
                    private final function adjustHue(e:SliderEvent):void
                              color.hue = e.target.value;
                              so.data.hue = color.hue;
                              so.flush();
                              update();
                    private final function update():void
                              filter = new ColorMatrixFilter(color.CalculateFinalFlatArray());
                              Dino.filters = [filter];
And this is the FLA Code:
import flash.events.KeyboardEvent;
// open a local shared object called "myStuff", if there is no such object - create a new one
var savedstuff:SharedObject = SharedObject.getLocal("myStuff");
Accept.addEventListener(MouseEvent.CLICK, SaveData);
PlayBTN.addEventListener(MouseEvent.CLICK, LoadData);
function SaveData(MouseEvent)
          savedstuff.data.username = Sliders.Dino.MovieClip;// changes var username in sharedobject
          savedstuff.flush();
          // saves data on hard drive;
function LoadData(event: MouseEvent)
          if (savedstuff.size > 0)
          {// checks if there is something saved
                    Sliders.Dino.MovieClip = savedstuff.data.username;
          }// change field text to username variable
// if something was saved before, show it on start
if (savedstuff.size > 0)
          Sliders.Dino.MovieClip = savedstuff.data.username;

How can i use this sript and loade another movie?

Hi there, i used the following script to load a movie from the server;
var request:URLRequest = new URLRequest("url string");
var loader:Loader = new Loader()
loader.load(request);
addChild(loader);
How can i use this sript and loade another movie? Can someone help me please?
[edited by moderator]

Sir, I changed it from:
var request:URLRequest = new URLRequest("http://agusandelsur.gov.ph/downloads/pdrrmo/agusan_del_sur/StaJosefa/Movies/Dir.swf");
var loader:Loader = new Loader()
loader.load(request);
addChild(loader);
to
var request:URLRequest = new URLRequest("http://agusandelsur.gov.ph/downloads/pdrrmo/agusan_del_sur/StaJosefa/Movies/Warning.swf");
var loader:Loader = new Loader()
loader.load(request);
addChild(loader);
When i expord the movie i get the following error.....
Scene 1, Layer 'Layer 3', Frame 1, Line 6 1151: A conflict exists with definition request in namespace internal.

Editting PDF documents that were created by a MAC doesn't work because of font incompatability. How can we get MAC fonts and load in our Adobe Acrobat Pro 9?

Editting PDF documents that were created by a MAC doesn't work because of font incompatability. How can we get MAC fonts and load in our Adobe Acrobat Pro 9?

If it's a Mac font and you're on Windows, you can't. If you are also on a Mac, you'll need to purchase the fonts (fonts are generally non-transferable, like software. One of the reasons pdf exists), install them and try your edits.
But it's best to edit the original document and create a new pdf when finished.

How should we be going about creating and saving and/ or exporting our ODC files using Excel 2013 for use in Project Server 2013 Online?

Hi I need your guidance on how I should go about setting up my Excel 2013 reports so that others in our Project Online 2013 environment can access and updates these reports of mine.
My questions are as follows:
I presume I need to create and save my ODC files in a PWA > Data Connections folder. I have English and French users in our environment. Do I need save them twice? Once in the French and again in the English Data Connections folder?
Likewise for the Excel file?
How should I go about creating my ODC files within Excel? By default, the ODC files are being created on my PC's > My Documents > My Data Sources folder. I presume I need to get them saved or exported to the PWA > Data Connections
folder. So, How should I be going about creating and saving and/ or exporting the ODC files???
FYI...My oData Feeds that I wish to use and join in this particular Excel file are as follows:
https://cascades.sharepoint.com/sites/pwa/_api/projectdata/AssignmentTimephasedData01T00:00:00'
https://cascades.sharepoint.com/sites/pwa/_api/projectdata/Projects()?$select=ProjectId,ProjectName,CAS_Classification,CAS_PCO,CAS_IT_Department,CAS_Program,CAS_SubProgram
https://cascades.sharepoint.com/sites/pwa/_api/projectdata/TimeSet()?select=TimeByDay,TimeDayOfTheWeek$filter=TimeByDay ge datetime'2014-10-19T00:00:00'
https://cascades.sharepoint.com/sites/pwa/_api/projectdata/Resources()?$select=ResourceId,ResourceName,Programs,Supplier,Source,Role,CostType
Thanks in advance,
\Spiro Theopoulos PMP, MCITP. Montreal, QC (Canada)

Thank you Guilaume. May I ask you to help clarify a bit more for me? If I have to do it for both languages (the reports and ODC files), do I simply copy the same ODC files from e.g., the English to French folder in PWA (Odc files)? Or does
that defeat the purpose? Or, do I need to create a new set of oData Feed Connection files with a French version of Excel 2013 and save them to the French Data Connections folder in PWA? Do I need to have a French version of Excel 2013 to create
French ODC files and ultimately French based reports and/ or vice versa?
I did notice that the following oData metadata command from within a browser produces different results (ie., English versus French metadata returned) depending on who runs it (i.e., French or English user, etc). As you can see I am a bit confused.
Any help you can provide would be greatly appreciated.
https://XXXXX.sharepoint.com/sites/pwa/_api/projectdata/$metadata
\Spiro Theopoulos PMP, MCITP. Montreal, QC (Canada)

By using OID how to unzip the folder and load bunch of .csv files

Hi All
bellow is the my scenario.
in my scenarion we have created FTP folder that will load the .zip files(Every Day).
.zip files that will contain bunch of .csv file (flat files) and by using OID need to extract the .zip file and load the all .csv files into target database. source data is .csv files and target data is oracle10g. Dose it will possible by using ODI?? please suggest me...
Thanks in Advance
Zakeer

Hi,
i'm interrested on this way of reading multiple files, i tried to follow those steps but i'm getting an error while running the package:
ODI-1226: Step vReadFile fails after 1 attempt(s).
ODI-1236: Error while refreshing variable VOUCHER_CUSTOMER_DATA_INTEGRATION.vReadFile.
Caused By: java.lang.NumberFormatException: For input string: "#Activity_report_name"
the variable vReadFile can't recognize the other variable Activity_report_name.
the refreshing query for vReadFile is :
select file C1_FILE
from TABLE
/*$$SNPS_START_KEYSNP$CRDWG_TABLESNP$CRTABLE_NAME=files_namesSNP$CRLOAD_FILE=C:\/files_name.txtSNP$CRFILE_FORMAT=DSNP$CRFILE_SEP_FIELD=0x0009SNP$CRFILE_SEP_LINE=0x000D0x000ASNP$CRFILE_FIRST_ROW=#Activity_report_nameSNP$CRFILE_ENC_FIELD=SNP$CRFILE_DEC_SEP=SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=fileSNP$CRTYPE_NAME=STRINGSNP$CRORDER=1SNP$CRLENGTH=50SNP$CRPRECISION=50SNP$CRACTION_ON_ERROR=0SNP$CR$$SNPS_END_KEY*/
any suggestion plz
regards

How is the best way to backup and organize Adobe layered .PSD files on iMac OSX maverick?

How is the best way to organize and backup Adobe layered PSD files on iMac desktop OSX maverick?
I lost all my Adobe Photoshop files + everything else on my IMAC when it crashed. They reinstalled Operating System. But now i must install programs such as MS Word & Adobe indesign suite.
Please help me determine what is the bestway to backup Adobe layered PSD files? I believe these are my choices to be assured this doesn't ever hapen again. Please comment.
Buy Apple Airport Time capsule $280. But I am not sure if it can store PSD layers. Can it or do you have to have Apple Apperture software to act be sure layers are saved
I had had trouble getting Adobe Cloud to sync to save files and so just trusted my computer to not ever crash. Any hints on this procedure
Are there any hints on PhotoShop image organization for a current IMac usser ?
Please help.
Teann ucreateit

My backup plan is to use Time Machine to make a backup to an external disk drive plus I also do a clone of my system disk. So far between the bootable clone and the Time Machine backup this plan has covered all of my needs.
Allan

Remove / unload external swf file(s) from the main flash file and load a new swf file and garbage collection from memory.

I can't seem to remove / unload the external swf files e.g when the carousel.swf (portfolio) is displayed and I press the about button the about content is overlapping the carousel (portfolio) . How can I remove / unload an external swf file from the main flash file and load a new swf file, while at the same time removing garbage collection from memory?
This is the error message(s) I am receiving: "TypeError: Error #2007: Parameter child must be non-null.
at flash.display::DisplayObjectContainer/removeChild()
at index_fla::MainTimeline/Down3()"
import nl.demonsters.debugger.MonsterDebugger;
var d:MonsterDebugger=new MonsterDebugger(this);
stage.scaleMode=StageScaleMode.NO_SCALE;
stage.align=StageAlign.TOP_LEFT;
stage.addEventListener(Event.RESIZE, resizeHandler);
// loader is the loader for portfolio page swf
var loader:Loader;
var loader2:Loader;
var loader3:Loader;
var loader1:Loader;
// resize content
function resizeHandler(event:Event):void {
    // resizes portfolio page to center
loader.x = (stage.stageWidth - loader.width) * .5;
loader.y = (stage.stageHeight - loader.height) * .5;
// resizes about page to center
loader3.x = (stage.stageWidth - 482) * .5 - 260;
loader3.y = (stage.stageHeight - 492) * .5 - 140;
/*loader2.x = (stage.stageWidth - 658.65) * .5;
loader2.y = (stage.stageHeight - 551.45) * .5;*/
addEventListener(Event.ENTER_FRAME, onEnterFrame,false, 0, true);
function onEnterFrame(ev:Event):void {
var requesterb:URLRequest=new URLRequest("carouselLoader.swf");
loader = null;
loader = new Loader();
loader.name ="carousel1"
//adds gallery.swf to stage at begining of movie
loader.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, ioError);
function ioError(event:IOErrorEvent):void {
trace(event);
try {
loader.load(requesterb);
} catch (error:SecurityError) {
trace(error);
addChild(loader);
loader.x = (stage.stageWidth - 739) * .5;
loader.y = (stage.stageHeight - 500) * .5;
// stop gallery.swf from duplication over and over again on enter frame
removeEventListener(Event.ENTER_FRAME, onEnterFrame);
//PORTFOLIO BUTTON
//adds eventlistner so that gallery.swf can be loaded
MovieClip(root).nav.portfolio.addEventListener(MouseEvent.MOUSE_DOWN, Down, false, 0, true);
function Down(event:MouseEvent):void {
// re adds listener for contact.swf and about.swf
MovieClip(root).nav.info.addEventListener(MouseEvent.MOUSE_DOWN, Down1, false, 0, true);
MovieClip(root).nav.about.addEventListener(MouseEvent.MOUSE_DOWN, Down3, false, 0, true);
//unloads gallery.swf from enter frame if users presses portfolio button in nav
var requester:URLRequest=new URLRequest("carouselLoader.swf");
    loader = null;
loader = new Loader();
loader.name ="carousel"
loader.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, ioError);
function ioError(event:IOErrorEvent):void {
trace(event);
try {
loader.load(requester);
} catch (error:SecurityError) {
trace(error);
addChild(loader);
loader.x = (stage.stageWidth - 739) * .5;
loader.y = (stage.stageHeight - 500) * .5;
removeChild( getChildByName("about") );
removeChild( getChildByName("carousel1") );
// remove eventlistner and prevents duplication of gallery.swf
MovieClip(root).nav.portfolio.removeEventListener(MouseEvent.MOUSE_DOWN, Down);
//INFORMATION BUTTON
//adds eventlistner so that info.swf can be loaded
MovieClip(root).nav.info.addEventListener(MouseEvent.MOUSE_DOWN, Down1, false, 0, true);
function Down1(event:MouseEvent):void {
//this re-adds the EventListener for portfolio so that end user can view again if they wish.
MovieClip(root).nav.portfolio.addEventListener(MouseEvent.MOUSE_DOWN, Down, false, 0, true);
MovieClip(root).nav.about.addEventListener(MouseEvent.MOUSE_DOWN, Down3, false, 0, true);
var requester:URLRequest=new URLRequest("contactLoader.swf");
loader2 = null;
loader2 = new Loader();
loader2.name ="contact"
loader2.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, ioError);
function ioError(event:IOErrorEvent):void {
trace(event);
try {
loader2.load(requester);
} catch (error:SecurityError) {
trace(error);
addChild(loader2);
loader2.x = (stage.stageWidth - 658.65) * .5;
loader2.y = (stage.stageHeight - 551.45) * .5;
// remove eventlistner and prevents duplication of info.swf
MovieClip(root).nav.info.removeEventListener(MouseEvent.MOUSE_DOWN, Down1);
//ABOUT BUTTON
//adds eventlistner so that info.swf can be loaded
MovieClip(root).nav.about.addEventListener(MouseEvent.MOUSE_DOWN, Down3, false, 0, true);
function Down3(event:MouseEvent):void {
//this re-adds the EventListener for portfolio so that end user can view again if they wish.
MovieClip(root).nav.portfolio.addEventListener(MouseEvent.MOUSE_DOWN, Down, false, 0, true);
MovieClip(root).nav.info.addEventListener(MouseEvent.MOUSE_DOWN, Down1, false, 0, true);
var requester:URLRequest=new URLRequest("aboutLoader.swf");
loader3 = null;
loader3 = new Loader();
loader3.name ="about"
loader3.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, ioError);
function ioError(event:IOErrorEvent):void {
trace(event);
try {
loader3.load(requester);
} catch (error:SecurityError) {
trace(error);
addChild(loader3);
loader3.x = (stage.stageWidth - 482) * .5 - 260;
loader3.y = (stage.stageHeight - 492) * .5 - 140;
removeChild( getChildByName("carousel") );
removeChild( getChildByName("carousel1") );
// remove eventlistner and prevents duplication of info.swf
MovieClip(root).nav.about.removeEventListener(MouseEvent.MOUSE_DOWN, Down3);
stop();

Andrei1,
Thank you for the helpful advice. I made the changes as you suggested but I am receiving a #1009 error message even though my site is working the way I wan it to work. I would still like to fix the errors so that my site runs and error free. This is the error I am receiving:
"TypeError: Error #1009: Cannot access a property or method of a null object reference."
I'm sure this is not the best method to unload loaders and I am guessing this is why I am receiving the following error message.
     loader.unload();
     loader2.unload();
     loader3.unload();
I also tried creating a function to unload the loader but received the same error message and my portfolio swf was not showing at all.
     function killLoad():void{
     try { loader.close(); loader2.close; loader3.close;} catch (e:*) {}
     loader.unload(); loader2.unload(); loader3.unload();
I have a question regarding suggestion you made to set Mouse Event to "null". What does this do setting the MouseEvent do exactly? Also, since I've set the MouseEvent to null do I also have to set the loader to null? e.g.
---- Here is my updated code ----
// variable for external loaders
var loader:Loader;
var loader1:Loader;
var loader2:Loader;
var loader3:Loader;
// makes borders resize with browser size
function resizeHandler(event:Event):void {
// resizes portfolio page to center
     loader.x = (stage.stageWidth - loader.width) * .5;
     loader.y = (stage.stageHeight - loader.height) * .5;
// resizes about page to center
     loader3.x = (stage.stageWidth - 482) * .5 - 260;
     loader3.y = (stage.stageHeight - 492) * .5 - 140;
//adds gallery.swf to stage at begining of moviie
     Down();
//PORTFOLIO BUTTON
//adds eventlistner so that gallery.swf can be loaded
     MovieClip(root).nav.portfolio.addEventListener(MouseEvent.MOUSE_DOWN, Down, false, 0, true);
function Down(event:MouseEvent = null):void {
// re adds listener for contact.swf and about.swf
     MovieClip(root).nav.info.addEventListener(MouseEvent.MOUSE_DOWN, Down1, false, 0, true);
     MovieClip(root).nav.about.addEventListener(MouseEvent.MOUSE_DOWN, Down3, false, 0, true);
//unloads gallery.swf from enter frame if users presses portfolio button in nav
     var requester:URLRequest=new URLRequest("carouselLoader.swf");
     loader = new Loader();
     loader.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, ioError);
     function ioError(event:IOErrorEvent):void {
     trace(event);
     try {
     loader.load(requester);
     } catch (error:SecurityError) {
     trace(error);
     this.addChild(loader);
     loader.x = (stage.stageWidth - 739) * .5;
     loader.y = (stage.stageHeight - 500) * .5;
// sure this is not the best way to do this - but it is unload external swfs
     loader.unload();
     loader2.unload();
     loader3.unload();
// remove eventlistner and prevents duplication of gallery.swf
     MovieClip(root).nav.portfolio.removeEventListener(MouseEvent.MOUSE_DOWN, Down);
//INFORMATION BUTTON
     //adds eventlistner so that info.swf can be loaded
     MovieClip(root).nav.info.addEventListener(MouseEvent.MOUSE_DOWN, Down1, false, 0, true);
     function Down1(event:MouseEvent = null):void {
     //this re-adds the EventListener for portfolio so that end user can view again if they wish.
     MovieClip(root).nav.portfolio.addEventListener(MouseEvent.MOUSE_DOWN, Down, false, 0, true);
     MovieClip(root).nav.about.addEventListener(MouseEvent.MOUSE_DOWN, Down3, false, 0, true);
     var requester:URLRequest=new URLRequest("contactLoader.swf");
     loader2 = null;
     loader2 = new Loader();
     loader2.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, ioError);
     function ioError(event:IOErrorEvent):void {
     trace(event);
     try {
     loader2.load(requester);
}      catch (error:SecurityError) {
     trace(error);
     addChild(loader2);
     loader2.x = (stage.stageWidth - 658.65) * .5;
     loader2.y = (stage.stageHeight - 551.45) * .5;
loader.unload();
loader2.unload();
loader3.unload();
     // remove eventlistner and prevents duplication of info.swf
     MovieClip(root).nav.info.removeEventListener(MouseEvent.MOUSE_DOWN, Down1);
//ABOUT BUTTON
     //adds eventlistner so that info.swf can be loaded
     MovieClip(root).nav.about.addEventListener(MouseEvent.MOUSE_DOWN, Down3, false, 0, true);
     function Down3(event:MouseEvent = null):void {
     //this re-adds the EventListener for portfolio so that end user can view again if they wish.
     MovieClip(root).nav.portfolio.addEventListener(MouseEvent.MOUSE_DOWN, Down, false, 0, true);
     MovieClip(root).nav.info.addEventListener(MouseEvent.MOUSE_DOWN, Down1, false, 0, true);
     var requester:URLRequest=new URLRequest("aboutLoader.swf");
     loader3 = null;
     loader3 = new Loader();
     loader3.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, ioError);
     function ioError(event:IOErrorEvent):void {
     trace(event);
     try {
     loader3.load(requester);
}      catch (error:SecurityError) {
     trace(error);
     addChild(loader3);
     loader3.x = (stage.stageWidth - 482) * .5 - 260;
     loader3.y = (stage.stageHeight - 492) * .5 - 140;
     loader.unload();
     loader2.unload();
     loader3.unload();
     // remove eventlistner and prevents duplication of info.swf
     MovieClip(root).nav.about.removeEventListener(MouseEvent.MOUSE_DOWN, Down3);
     stop();

Parent changes between save and load of a PDF file

I am using LiveCycle 8.2 and Acrobat 9.2 - and Reader 9.2
I have an automated process that uses a plug-in to fill out and save a PDF form using XML data.
This works well - saves time , etc.
I have a problem where a certain data element seems to have a different heirarchical relationship in the Reader than in Acrobat..
I have added some xfa.host.MessageBox() statements to print out data as the form is being saved and then when it is loaded into the Reader - these values are not the same -
but i have checked and when I laod it using Acroabt everyhting is the same as when the data was saved - but there a different relationship apparently exists when I load the form using the reader.
Has anyone seen this before ?
Is there anything that I can do about it ?
Any help is appreciated - thanks

a snippet of the code involved is listed here :
Provider.page2.Practice.Associatec.AssociateType.AssociateTypeDescription::initialize - (JavaScript, client)
var CovgYN;
var msg; var lineofdata;
var assttype = this.rawValue;msg
= "Check1 : " + assttype + " = " + this.parent.parent.AssociateLastName.rawValue;xfa.host.messageBox(msg);
lineofdata= this.parent.parent.AssociateFirstName.rawValue + " " + this.parent.parent.AssociateLastName.rawValue + " " + assttype + " -" + CovgYN;
The data contained in the msg and lineofdata variables - is different in Acrobat 9.2 and The Reader ... It is correct in Acrobat when I load the form and Import the XML data file.
When the correct data Form is saved and loaded using the reader the values "parent" is different so - the values are not the same -=
This is a serious problem !.
Is this a known bug or issue ?

How do you overlap PDF's and finish with one PDF file? Need help ASAP

how do you overlap PDF's and finish with one PDF file?
Need help ASAP

I'm not sure if you can do that with CreatePDF. Try it; you got one free use when you sign up with Acrobat.com
If not, you will have to use Adobe Acrobat; there is a full-use 30 days trial.

My mac disk is full and i cant transfer files from Mac to USB. saying the format is not good, how can i change the format and what happened to the files i have on USB?

my mac disk is full and i cant transfer files from Mac to USB. saying the format is not good, how can i change the format and what happened to the files i have on USB?

Once something similar happened to me. The external drives I had set up for FCP to use for some reason were not mounted, and FCP put all its render files on the main drive and I couldn't find them anywhere.
Go to applications, and control-click (and hold down) on your FCP icon; you should get a pop up menu that says "show package contents". Select that, select the "contents" folder, then the "mac OS" folder. See if your quicktime file is in there, or if you've got render files in the "render" folder or audio render files in the "audio render" folder that don't belong there.
That's where FCP sticks stuff when your documents FCP project folders are not available or when external drives you've selected aren't available.

Saving and Loading variables in a .txt file (Offline)

I'm working a software we've done with Flash, but we'd want
people to be able to save the variables they selected. We need them
to be able to save the value of about 10 variables in a file on
their desktop, and then be able to load that file again.
Is it possible to do that without having to use php or stuff
like that (that's why we want to make it an offline applications so
we don't have to use php to be able to save files).
I know Actionscript looks a lot like Javascript and with
Javascript it's really easy to do, but all the saving functions are
blocked in Flash for security reasons.
If anyone knows how to do that, to simply save and load a
.txt file, please let me know. If it would be possible also to
change the .txt to whatever else it would be even better. The file
can still be opened in Notepad but at least it looks a bit more
professionnal to have our own extension. Again in Javascript or
with a .bat file it's really easy to save variables to whatever
type of file, even to non existing types, it simply creates a text
file with an unknown ending.
Thanks!

I found a page that explains in a really easy way how to
communicate with Javascript if the flash object is contained in an
html page, but I couldn't find any page explaining how it works if
it's not in an html page. On our side, before using the software
we're creating we'll convert it to a .exe. How can we call a
Javascript from that .exe since we can't incorporate the Javascript
in the container since there isn't really a container... Is there a
way to link to a Javascript (.js) that would be in the same folder
as the .exe? Or would there be a way to incorporate the Javascript
right into the .exe?
Let me know if any of you have a solution for that.
Thanks!
http://livedocs.adobe.com/flash/9.0/main/wwhelp/wwhimpl/common/html/wwhelp.htm?context=Liv eDocs_Parts&file=00000342.html#wp126566

Saving and Loading a Scenario

Hi Friends,
I would like to know how a scenario will be saved in Dashboard,In the same way i want to load the saved scenario
http://businessobjects.auc.com/ESRI2008/cd/Sample_files/Xcelsius_2008_Samples/Flash%20Samples/financial_analysis_calculator.swf
Could you please explain me in details how to do it.if possible send me a sample .xlf file.
Thanks
Santhosh

Hi,
The Local Scenario will be saved as .SOL file on your local machine.
Even though if you are running it on Infoview, when ever you save a scenario of your dashboard.
It goes to C:\Documents and Settings\<user>\Application Data\Macromedia\Flash Player\macromedia.com\support\flashplayer\sys
and stores the data in a .SOL.
The file name will be selected randomly, mosty it will be in numbers.
Let me know if you need any other information.
Regards,
AnjaniKumar C.A.

Saving and loading images (png) on the iPhone / iPad locally

Hi,
you might find this helpful..
Just tested how to save and load images, png in this case, locally on the i-Devices.
In addition with a SharedObject it could be used as an image cache.
Make sure you have the adobe.images.PNG encoder
https://github.com/mikechambers/as3corelib/blob/master/src/com/adobe/images/PNGEncoder.as
Not really tested, no error handling, just as a start.
Let me know, what you think...
Aaaaah and if somebody has any clue about this:
http://forums.adobe.com/thread/793584?tstart=0
would be great
Cheers Peter
    import flash.display.Bitmap
     import flash.display.BitmapData
    import flash.display.Loader
    import flash.display.LoaderInfo
    import flash.events.*
    import flash.filesystem.File
    import flash.filesystem.FileMode
    import flash.filesystem.FileStream
    import flash.utils.ByteArray;
    import com.adobe.images.PNGEncoder;
private function savePic(){
    var bmp = // Your Bitmap to save
    savePicToFile(bmp, "test.png")
private function loadPic(){
     readPicFromFile("test.png")
private function savePicToFile(bmp:Bitmap, fname:String){
       var ba:ByteArray = PNGEncoder.encode(bmp.bitmapData);
        var imagefile:File = File.applicationStorageDirectory;
        imagefile = imagefile.resolvePath(fname);
        var fileStream = new FileStream();
        fileStream.open(imagefile, FileMode.WRITE);
        fileStream.writeBytes(ba);
         trace("saved imagefile:"+imagefile.url)
private function readPicFromFile(fname:String){
        var imagefile:File = File.applicationStorageDirectory;
        imagefile = imagefile.resolvePath(fname);
        trace("read imagefile:"+imagefile.url)
        var ba:ByteArray = new ByteArray();
        var fileStream = new FileStream();
        fileStream.open(imagefile, FileMode.READ);
        fileStream.readBytes(ba);
        var loader:Loader = new Loader();
        loader.contentLoaderInfo.addEventListener(Event.COMPLETE, onPicRead)
        loader.loadBytes(ba);
private function onPicRead(e:Event){
    trace("onPicRead")
     var bmp:Bitmap = Bitmap(e.target.content)
     // Do something with it

Are the movies transferred to your iPhone via the iTunes sync/transfer process but don't play on your iPhone?
Copied from this link.
http://www.apple.com/iphone/specs.html
Video formats supported: H.264 video, up to 1.5 Mbps, 640 by 480 pixels, 30 frames per second, Low-Complexity version of the H.264 Baseline Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; H.264 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Baseline Profile up to Level 3.0 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats.
What are you using for the conversion? Does whatever you are using for the conversion include an iPod or iPhone compatible setting for the conversion?
iTunes includes a create iPod or iPhone version for a video in your iTunes library. Select the video and at the menu bar, go to Advanced and select Create iPod or iPhone version. This will duplicate the video in your iTunes library. Select this version for transfer to your iPhone to see if this makes any difference.

How to Extract Data from SAP and Load it into Essbase

Hi All,
Can you recommend some ways to extract data from SAP and load it into Essbase?. I have no knowledge about SAP, not sure how I can perform this task. Can I use ODI for this job?
Thanks

hi,
Not sure if this helps but give a try
you can create connection from EAS to SAP .. using a plug-in .. if you have access to oracle Support go for [ID 968961.1]
or
below are steps
1. In EASPATH\console, open components.xml in a text editor.
2. Under <PluginList>, enter <Plugin archiveName="SAP" packageName="com.essbase.eas.sap.ui"/> before the closing </PlugIn> tag.
3. Save and close the file.
4. In EASPATH\console\bin, open admincon.lax in a text editor.
5. Search for lax.class.path= and append ;..\lib\sap_client.jar;..\lib \sap_common.jar to the entry. Save and close the file.
6. In EASPATH\server\bin, open adminsvr.lax in a text editor.
7. Search for lax.nl.java.option.additional, and append -DRFC_INI=EASPATH\server\saprfc.ini. Save and close the file.
8. Create a new environment variable, RFC_INI, with a value of EASPATH\server\saprfc.ini
9. Copy librfc.dll andsapjcorfc.dll to EASPATH\server\bin. You may need to obtain these files from SAP.
let me know if it works :)

How to speed up my saving and loading of a psd. file?

Similar Messages

Maybe you are looking for