How to split all the fields of output ls-l from an internal table

Hi all,
Using ls-l command i have brought the file attributes of a file like its read and write permissions,creation date ,path etc in a internal table.
Now how to split all these fields from the internal table or what should be the splitting criteria.
The field contents of internal table are like this:
-rw-rw---- 1 devadm sapsys 18360 apr 29......so on
I want to split this into different fields.
Kindly suggest.
Thank You.

Hi,
I think the delimiter will be space. For date alone (Apr 29) you need to concatenate after the string has been split.
Thanks and regards,
S. Chandramouli

Similar Messages

How to include all the fields of a Table into a Structure.

How to include a Complete Table into a Structure.
I want to include all the fields of KNA1 into a structure say W_KNA1(A local structure declared within a program)....How this can b acheived.
Thanks in Advance.

if i want to use INCLUDE STRUCTURE.....how will it work.
TYPES : begin of ty_kna1,
INCLUDE STRUCTURE KNA1,
end of ty_kna1.
tell me this is correct stmt.

How to list all the Fields for an Active Directory Object

How do I list all the fields that an Active Directory object contains? I know the most common ones, but would like to enumerate through all the fields and obtain the type of fields and their values...

Here is my complete code - I only put snippets so that the post was not too huge...
Option Explicit
Const ADS_SCOPE_SUBTREE = 2
Const ForReading = 1, ForWriting = 2, ForAppending = 8
Dim adoCommand, adoConnection, adoRecordSet
Dim dtmDate, dtmValue
Dim j
Dim lngBias, lngBiasKey, lngHigh, lngLow, lngValue
Dim objADObject, objClass, objDate, objFile, objFSO, objRootDSE, objShell
Dim pathToScript
Dim strAdsPath, strConfig, strDNSDomain, strHex, strItem, strProperty, strValue
Dim strFilter, strQuery
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set objShell = CreateObject("Wscript.Shell")
pathToScript = objShell.CurrentDirectory
Set objFile = objFSO.CreateTextFile(pathToScript & "\TestAD.csv")
' Determine Time Zone bias in local registry.
' This bias changes with Daylight Savings Time.
lngBiasKey = objShell.RegRead("HKLM\System\CurrentControlSet\Control\TimeZoneInformation\ActiveTimeBias")
If (UCase(TypeName(lngBiasKey)) = "LONG") Then
lngBias = lngBiasKey
ElseIf (UCase(TypeName(lngBiasKey)) = "VARIANT()") Then
lngBias = 0
For j = 0 To UBound(lngBiasKey)
lngBias = lngBias + (lngBiasKey(j) * 256^j)
Next
End If
' Determine configuration context and DNS domain from RootDSE object.
Set objRootDSE = GetObject("LDAP://RootDSE")
strConfig = objRootDSE.Get("configurationNamingContext")
strDNSDomain = objRootDSE.Get("defaultNamingContext")
Set adoCommand = CreateObject("ADODB.Command")
Set adoConnection = CreateObject("ADODB.Connection")
adoConnection.Provider = "ADsDSOObject"
adoConnection.Open "Active Directory Provider"
adoCommand.ActiveConnection = adoConnection
adoCommand.CommandText = "SELECT * FROM 'LDAP://" & strDNSDomain & "'WHERE objectClass=user'"
adoCommand.Properties("Page Size") = 1000
adoCommand.Properties("Searchscope") = ADS_SCOPE_SUBTREE
Set adoRecordSet = adoCommand.Execute
Set adoRecordSet = adoCommand.Execute
adoRecordSet.MoveFirst
Do Until adoRecordSet.EOF
strAdsPath = adoRecordSet.Fields("ADsPath").Value
' Bind to Active Directory object specified.
Set objADObject = GetObject(strAdsPath)
Set objClass = GetObject(objADObject.Schema)
' Write which object is grabbed from AD
objFile.Write(Replace(strAdsPath, ",", ";;;"))
' Enumerate mandatory object properties.
For Each strProperty In objClass.MandatoryProperties
On Error Resume Next
strValue = objADObject.Get(strProperty)
If (Err.Number = 0) Then
On Error GoTo 0
If (TypeName(strValue) = "String") Or (TypeName(strValue) = "Long") Or (TypeName(strValue) = "Date") Then
objFile.Write("," & strProperty & "|||" & Replace(CStr(strValue), ",", ";;;"))
ElseIf (TypeName(strValue) = "Byte()") Then
strHex = OctetToHexStr(strValue)
objFile.Write("," & strProperty & "|||" & CStr(strHex))
ElseIf (TypeName(strValue) = "Variant()") Then
For Each strItem In strValue
On Error Resume Next
objFile.Write("," & strProperty & "|||" & Replace(CStr(strItem), ",", ";;;"))
If (Err.Number <> 0) Then
On Error GoTo 0
objFile.Write("," & strProperty & "|||Value cannot be displayed")
End If
On Error GoTo 0
Next
ElseIf (TypeName(strValue) = "Boolean") Then
objFile.Write("," & strProperty & "|||" & CBool(strValue))
Else
objFile.Write("," & strProperty & "|||Type:" & TypeName(strValue))
End If
Else
Err.Clear
sColl = objADObject.GetEx(strProperty)
If (Err.Number = 0) Then
For Each strItem In sColl
objFile.Write("," & strProperty & "|||" & CStr(strItem))
If (Err.Number <> 0) Then
objFile.Write("," & strProperty & "|||Value cannot be displayed")
End If
Next
On Error GoTo 0
Else
Err.Clear
Set objDate = objADObject.Get(strProperty)
If (Err.Number = 0) Then
lngHigh = objDate.HighPart
If (Err.Number = 0) Then
lngLow = objDate.LowPart
If (lngLow < 0) Then
lngHigh = lngHigh + 1
End If
lngValue = (lngHigh * (2 ^ 32)) + lngLow
If (lngValue > 120000000000000000) Then
dtmValue = #1/1/1601# + (lngValue / 600000000 - lngBias) / 1440
On Error Resume Next
dtmDate = CDate(dtmValue)
If (Err.Number <> 0) Then
objFile.Write("," & strProperty & "|||<Never>")
Else
objFile.Write("," & strProperty & "|||" & CStr(dtmDate))
End If
Else
objFile.Write("," & strProperty & "|||" & FormatNumber(lngValue, 0))
End If
Else
objFile.Write("," & strProperty & "|||Value cannot be displayed")
End If
Else
On Error GoTo 0
objFile.Write("," & strProperty)
End If
On Error GoTo 0
End If
End If
Next
' Enumerate optional object properties.
For Each strProperty In objClass.OptionalProperties
On Error Resume Next
strValue = objADObject.Get(strProperty)
If (Err.Number = 0) Then
On Error GoTo 0
If (TypeName(strValue) = "String") Then
objFile.Write("," & strProperty & "|||" & Replace(CStr(strValue), ",", ";;;"))
ElseIf (TypeName(strValue) = "Long") Then
objFile.Write("," & strProperty & "|||" & Replace(CStr(strValue), ",", ";;;"))
ElseIf (TypeName(strValue) = "Date") Then
objFile.Write("," & strProperty & "|||" & Replace(CStr(strValue), ",", ";;;"))
ElseIf (TypeName(strValue) = "Byte()") Then
strHex = OctetToHexStr(strValue)
objFile.Write("," & strProperty & "|||" & CStr(strHex))
ElseIf (TypeName(strValue) = "Variant()") Then
For Each strItem In strValue
On Error Resume Next
objFile.Write("," & strProperty & "|||" & Replace(CStr(strItem), ",", ";;;"))
If (Err.Number <> 0) Then
On Error GoTo 0
objFile.Write("," & strProperty & "|||Value cannot be displayed")
End If
On Error GoTo 0
Next
ElseIf (TypeName(strValue) = "Boolean") Then
objFile.Write("," & strProperty & "|||" & CBool(strValue))
Else
objFile.Write("," & strProperty & "|||Type:" & TypeName(strValue))
End If
Else
Err.Clear
sColl = objADObject.GetEx(strProperty)
If (Err.Number = 0) Then
For Each strItem In sColl
objFile.Write("," & strProperty & "|||" & CStr(strItem))
If (Err.Number <> 0) Then
objFile.Write("," & strProperty & "|||Value cannot be displayed")
End If
Next
On Error GoTo 0
Else
Err.Clear
Set objDate = objADObject.Get(strProperty)
If (Err.Number = 0) Then
lngHigh = objDate.HighPart
If (Err.Number = 0) Then
lngLow = objDate.LowPart
If (lngLow < 0) Then
lngHigh = lngHigh + 1
End If
lngValue = (lngHigh * (2 ^ 32)) + lngLow
If (lngValue > 120000000000000000) Then
dtmValue = #1/1/1601# + (lngValue / 600000000 - lngBias) / 1440
On Error Resume Next
dtmDate = CDate(dtmValue)
If (Err.Number <> 0) Then
objFile.Write("," & strProperty & "|||<Never>")
Else
objFile.Write("," & strProperty & "|||" & CStr(dtmDate))
End If
Else
objFile.Write("," & strProperty & "|||" & lngValue)
End If
Else
objFile.Write("," & strProperty & "|||Value cannot be displayed")
End If
Else
On Error GoTo 0
objFile.Write("," & strProperty & "||| ")
End If
On Error GoTo 0
End If
End If
Next
objFile.WriteLine("")
adoRecordSet.MoveNext
Loop
objFile.Close
' Function to convert OctetString (Byte Array) to a hex string.
Function OctetToHexStr(arrbytOctet)
Dim k
OctetToHexStr = ""
For k = 1 To Lenb(arrbytOctet)
OctetToHexStr = OctetToHexStr _
& Right("0" & Hex(Ascb(Midb(arrbytOctet, k, 1))), 2)
Next
End Function
I have been able to obtain all the Computer, Contact, Group and OU objects without issue with this code...

How to list all the fields under an Infotype!

Hi
I need a list of fields under an Infotype, used the following link to list them but unsuccesful, is there any other way I can list the infotype feilds.
Re: Infotype 0002 all fields
Thanks

Hi Tara,
The FM 'DDIF_FIELDINFO_GET' gives you all the fields of the table in the Exporting IT 'DFIES_TAB' that you mention under the parameter 'TABNAME'. I am not sure why it doesnt work for you. Alternatively you can also try this FM 'DDIF_NAMETAB_GET' (This FM is actually used in the FM 'DDIF_FIELDINFO_GET' ) .
If you are still unsuccesful in meeting your requirement then please paste your piece of code.
Regards
Nanda

Form Guide: How to hide all the field of a subform

Hello,
I'm an experienced LC Designer user for PDF Forms. I need to work on my first Form guide today.
The first thing I cannot realize is to hide all the fields in a subform, based on some conditions. Is it possible to make that in a sort of script that work fine for both the pdf and the form guide?
I have noticed that subform doen't exists into form guide. What append with theire event scripts?
Thanks
Denis

DECLARE
LC$Block   Varchar2(40) := get_form_property( NAME_IN('System.Current_Form'), FIRST_BLOCK ) ;
BEGIN
Loop -- For each block of the form
     Set_Block_Property( LC$Block, INSERT_ALLOWED, PROPERTY_FALSE );
     Set_Block_Property( LC$Block, UPDATE_ALLOWED, PROPERTY_FALSE );
     Set_Block_Property( LC$Block, DELETE_ALLOWED, PROPERTY_FALSE );
     LC$Block := get_block_property( LC$Block, NEXTBLOCK ) ; -- next block
     Exit when LC$Block is null ;
End loop ;
END;Francois

How to retrieve all the users along with their password from LDAP

Hello,
Can anyone let me know how to retrieve and list all the user along with their password from LDAP.
Thanks

Hi Prashant,
I have limited experience with Synchronization, but I agree with you - if you need to synchronize Passwords, you need to have the Password in clear Text.
If you trying to build your own Synchronization Solution using any of the avaliable LDAP APIs, I don't think you can ever retrieve a user's Password in clear text.
However, I did come across an interesting article & I hope you find it useful :-
http://www.oracle.com/technology/obe/obe_as_10g/im/configssl/configssl.htm
I am not sure if SSL is necessary - If you have a look at Metalink Note 277382.1 ( How to Configure OID External Authentication Plug-In for Authentication Via Microsoft Active Directory (MS AD) ), teh question asked by oidspadi.sh for the same is asnwered as "N".
Regards,
Sandeep

How to concatenate all the fields in a single statement with tilda..

hi, i have 10 fields, i have to concatenate those fields seperated with tilda... and put into the application server...in a single statement,
kindly suggest me hw to write..?
Thanx in Advance.
Akshitha.

Hi.....
Just see the following code...
It solves your requirement.....
REPORT ZCSV_SPFLI_APP.
TABLES :
SPFLI. " Flight
FIELD-SYMBOLS : <FS>. "TYPE C.
DATA T_SPFLI LIKE STANDARD TABLE OF SPFLI .
DATA W_CHAR(20) TYPE C.
DATA W_TYPE .
DATA:
BEGIN OF T_TABLE OCCURS 0,
 LINE TYPE STRING,
END OF T_TABLE.
SELECT * FROM SPFLI INTO TABLE T_SPFLI.
LOOP AT T_SPFLI INTO SPFLI.
DO.
 ASSIGN COMPONENT SY-INDEX OF STRUCTURE SPFLI TO <FS>.
 IF SY-SUBRC NE 0.
 EXIT.
 ELSE.
 MOVE <FS> TO W_CHAR.
 IF SY-INDEX EQ 1.
 T_TABLE-LINE = <FS>.
 ELSE.
 CONCATENATE T_TABLE-LINE '~' W_CHAR INTO T_TABLE-LINE.
 ENDIF.
 ENDIF.
ENDDO.
CONDENSE T_TABLE-LINE.
APPEND T_TABLE.
ENDLOOP.
LOOP AT T_TABLE.
WRITE / T_TABLE-LINE.
ENDLOOP.
OPEN DATASET 'YH647_SPFLI' FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF SY-SUBRC NE 0.
MESSAGE ' File is Not Opend' TYPE 'S'.
ENDIF.
LOOP AT T_TABLE.
TRANSFER T_TABLE-LINE TO 'YH647_SPFLI'.
ENDLOOP.
CLOSE DATASET 'YH647_SPFLI'.
This reads flight detail and makes the separated by '~' and stores in the application server (OPEN_DATASET, TRANAFER , CLOSE DATASET)
Reward points if useful.........
Suresh........

How to remove all the fields added to CI_Include in Sap Standard table

Hi,
I have added a new custom field in the CI_include structure in a standard SAP table. However now I want to remove that field but it not allowing me to remove the field as there is no field left in that CI_Include.
Has anybody tried this before?

Hi,
I think you have to delete the whole CI. Go to SE11 enter the name of the CI and press delete.
Not sure, but maybe this is the solution
Regards Rudi

How to get both, the ResultSet and Output (return value) from Oracle Stored Procedure

Hi! I am doing a conversion from MSSQL to Oracle with C++ and MFC ODBC. Any comment is appreciated!! I have Oracle 8i and Oracle ODBC 8.1.6 installed.
My question is how to retrieve the return value AND ALSO the resultSet at the same time by using Oracle function without modifying my souce codes (except puttting mypackage. string infron of my procedure name, see below).
-- My source code in C++ with MSSQL ....
sqlStr.Format("{? = call ListOfCustomers(%i)}", nNameID);
RcOpen = CustomerList.Open(CRecordset::forwardOnly, sqlStr, CRecordset::readOnly );
Where CustoemrList is a Crecordset object...
IN DoFieldExchange(CFieldExchange* pFX) I have ...
//{{AFX_FIELD_MAP(CQOSDB_Group)
pFX->SetFieldType(CFieldExchange::outputColumn);
RFX_Long(pFX, T("Name"), mCustoemrName);
//}}AFX_FIELD_MAP
// output parameter
pFX->SetFieldType( CFieldExchange::outputParam );
RFX_Int( pFX, T("IndexCount"), mCustomerNumber);
-- m_CustomerNumber is where i store the return value!!!
-- In Oracle Version, i have similar codes with ...
sqlStr.Format("{? = call mypackage.ListOfCustomers(%i)}", nNameID);
RcOpen = CustomerList.Open(CRecordset::forwardOnly, sqlStr, CRecordset::readOnly );
-- I have oracle package/Body codes as following...
create or replace package mypackage
as
type group_rct is ref cursor;
Function listgroups(
nameID NUMBER ,
RC1 IN OUT Mypackage.group_rct ) return int;
end;
Create or replace package body mypackage
as
Function listgroups(
NameID NUMBER ,
RC1 IN OUT Mypackage.group_rct )return int
IS
BEGIN
OPEN RC1 FOR SELECT Name
from Customer
WHERE ID = NameIDEND ListGroups;
END
return 7;
END listgroups;
END MyPackage;
Ive simplified my codes a bit....
null

yes, it is exactly what i want to do and I am using Oracle ODBC driver.
I tried using procedure with 1 OUT var fo numeric value and the other IN OUT ref cursor var instead of function, but error occurs when I called it from the application. It give me a memory ecxception error!!
sqlStr.Format("{? = call ListOfCustomers(%i)}", nNameID);
RcOpen = CustomerList.Open(CRecordset::forwardOnly, sqlStr, CRecordset::readOnly );
it seems to me that the ? marker var is making all the trouble... can you please give me any more comment on this?? thanks!
null

How to delete all the events and create new events from scratch?

I have all my photos separated into albums and I would like these albums to be considered events in iPhoto. The problem is that there are already lots of events in my iPhoto library that are not "real" events. It just so happens they were uploaded at a certain time and during one of my upgrades of iPhoto all these different uploads became different events. Of course, there are some albums I would like to become a single event as well...but I am not sure how to strip all of my photos of events and then add the photos to new events?

Select all the pics in an Album and Flag them.
Then go Events Menu -> Create Event from Flagged Photos
A new Event is created that moves the pics from their existing Event
Unflag the Photos then move to the next album. Repeat.
Regards
TD

Whether the fields of a single row in an internal table has got value.

I am doing an archiving report in PS Module.
The table RPSCO has 12 fields which represent each month.The records in the table are based on OBJNR and YEAR
Now i need to check for the latest year which month has some value .If any of the month has got some value i need to take that month.
Sample table given below.
OBJNR           year    Month1    month2      month3    so on
1)PR00002409 2006     0.00     0.00     664.70-     0.00 0.00     0.00     0.00     0.00     0.00
0.00     0.00     0.00     0.00
2)PR00002409 2005     0.00     0.00     0.00     0.00     0.00     0.00     0.00 0.00     0.00     0.00     48.70     127.20     0.00
In this case the output should be Month3.Because the latest year is 2006 and Month is Month3.

Hi Susmita,
You have to use DO VARYING option from field 3 onwards.
Below is the sample program to check whether the field has a value or not.
tables: rpsco.
data: it_rpsco like rpsco occurs 0 with header line.
data: v_wlp type rpsco-wlp00,
      v_wtp type rpsco-wtp00,
      v_pos type i.
select * from rpsco into table it_rpsco where gjahr = '2007'.
if lines( it_rpsco ) gt 0.
loop at it_rpsco.
clear v_pos.
do 16 times varying v_wlp from it_rpsco-wlp00 next it_rpsco-wlp01
              varying v_wtp from it_rpsco-wtp00 next it_rpsco-wtp01.
   v_pos = v_pos + 1.
   if not v_wlp is initial.
     write:/5 v_pos , 35 v_wlp, 70 v_wtp.
     exit.
   endif.
enddo.
endloop.
endif.
Regards,
Kumar Bandanadham
Edited by: Velangini Showry Maria Kumar Bandanadham on Jun 1, 2009 9:30 AM

How to read from an internal table with multiple key fields.

Hi All!!
I want to read from an internal table having keys as k1,k2,k3.
How can I use read statement to read an entry having this as the key fields.
Thanks in adavance..
Prabhas Jha

hi there
use:
sort itab by K1 K2 K3.
read table itab into wa with key K1 = value 1
                                              K2 = value2
                                              K3 = value 3
                                               BINARY SEARCH.
where:
itab is ur internal table
wa is the work area with the same line type as the itab
cheers
shivika

How do we know what are all the fields updated in a screen?

Hi all,
 If i am making modifications in row details of sales order screen .for eg, i am changing the quantity or price for a row
 I want to write log file for the updated fields for that particular sales order.
 How do we know what are all the fields are updated ?
 If we can use SBOTransaction_Notification procedure.How to write code inside that.
 Please provide code example for that.I have downloaded the sample.But i donot know how to use 'Add code to here ' part.
 Please help me to solve this.Hope your reply soon
Regards,
V.Rangarajan

Hi, V.Rangarajan!
When the field in the matrix is filled with some value and the user moves to another field, the et_LOST_FOCUS event occurs. So, i think you can try to handle ItemEvents and use such code (for example):
if (pVal.EventType == SAPbouiCOM.BoEventTypes.et_LOST_FOCUS && pVal.ItemUID == "38" && pVal.BeforeAction == false && pVal.FormType == 139)
string ChangedColumnID = pVal.ColUID;
int ChangedRowNumber = pVal.Row;
and write the values to your log.
"38" - is the matrix ID in the Orders form
"139" - is the Orders form
Also you can access to the value, that user had put into the field.
Hope this helps!

In the component overview screen of CO01 I want to disable all the field in screen of table control.I want to make it as output screen only.

Hi all
In the component overview screen of CO01 I want to disable all the field in screen of table control.I want to make it as output screen only.
Thanks & Regards,
Rajib.

Isn't that just exactly what transaction CO02 does? CO01 is for creating production orders so what sense does it make to have it display mode only?
Maybe your goal is to stop then end user changing the component assignment that is automatically detected by the system. If so, personally I think a better starting point would be PP configuration or user authorizations rather than looking to change the screen by whatever method. As we don't know what you are trying to achieve it's hard to offer much more advice maybe all you need is to change transaction to CO02

To create apple US account i followed all the steps including none in the payment option. i dont have US address how should i fill the fields.

to create apple US account i followed all the steps including none in the payment option. i dont have US address how should i fill the fields.

You need to be in a country to use its store - if you are not in the US with a US billing address then you cannot use the US store.
From the US store's terms of use :
The iTunes Service is available to you only in the United States, its territories, and possessions. You agree not to use or attempt to use the iTunes Service from outside these locations. Apple may use technologies to verify your compliance.

How to split all the fields of output ls-l from an internal table

Similar Messages

Maybe you are looking for