How to Start BPMN externally without NWA?

hi @,
How can  I start the BPMN from out side without going to the NWA . I know I can use WEb service for the Process to trigger the start event but how can I embed this in a process. Because the Process is available within UWL and can be accessed from there only .
Can we get the URL of the UI that is available in the UWL ?
These are 2 different questions and I feel they are serious issues in any implementation.
REgards,
AMit

Hi Amit,
> How can I start the BPMN from out side without going to the NWA .
I'm starting my processes at the moment with http://www.soapui.org/ - so you send a soap-message to the wsdl and retrieve a fault message which says the process has been triggered but this isn't what you want.
> I know I can use WEb service for the Process to trigger the start event
> but how can I embed this in a process. Because the Process is available
> within UWL and can be accessed from there only.
There is a tutorial about starting a bpm process programmatically, maybe this helps: https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80ace13d-5182-2b10-a584-bfa2042061e6
You may also have a closer look at this: https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/501bd56f-a5a6-2b10-4fbf-a61a64055fe4
Another option could be, that you create a webservice in the CAF that sends a soap-message to start the process you need- but i dont know how to that and even if it is possible.
Hope this helps.
With kind regards
Markus

Similar Messages

  • How to start / stop nodes without domain-controller / automatically on Win?

    Hi,
    we have a distributed installation of CMSDK 9.0.4.
    We have installed a 9.2.0.4 Database on Solaris and we are using the 10g(9.0.4) Infrastructure on Solaris with it.
    The first installation of CMSDK uses a J2EE-MidTier installation on the Solaris server and contains the CMSDK domain controller and a normal node with nfs protocol server running.
    The other installations are done on Win2003 Blades. Currently we are using two Blades. On each there is a J2EE-MidTier installation and within these we have installed CMSDK with HTTP-Node and normal node. We are using NTFS-Server within the normal nodes.
    The Blades are within one Domain and we have NLB-Cluster activated for both.
    The whole thing sounds complex, but it works fine. We only have some trouble regarding start/stop of the nodes:
    1. If the solaris backend fails, our cluster-configuration tries to stop and start cmsdk. While stopping cmsdk, all nodes - even those on the Win-Servers - are stopped. But starting does not bring em up again automatically.
    2. If a Windows Server is booted, the normal node does not start automatically.
    3. If one Windows Server is not available, the ifsctl check takes a very long time because it's trying to get information from the missing one.
    Is there a way to restart the domain controller and node on solaris without stopping the nodes on Windows?
    How can we start the windows nodes automatically after reboot?
    Is there a way to probably start the nodes without being managed / guarded by the domain controller?
    Thanks for help,
    Alex

    Try adding this script to your /etc/init.d directory:
    #!/bin/sh
    ifsctl start << EOF
    <ifsctl password>
    EOF
    Replace <ifsctl password> with the password that you would give at the prompt.
    It will complain about Inappropriate ioctl for device, but it works.

  • How to start Swing programs without console

    Hi, I'm working on Swing program, which can be started in the MS-DOS console by typing:
    java myProgram
    This works great, but for the end-users, I don't want them to see the ugly console that shows up and occasionally display exception code. How do I get the Swing program to start up without having the accompanying console?
    Any help is appreciated. Thanks! :-)

    you can also package it in a jar and make it executable. There's a good discussion in the Jar Forum about how to do that.

  • How to start process chain without sapall rigths...

    Hi everybody,
    I got the following problem:
    A (normal) user without sapall rights should be able to start a process chain by clicking a button in a bsp application. This works so far.
    The process chain is started by invoking the function module RSPC_API_CHAIN_START. The authority check in the fm throws an error because the user does not have the proper rights/roles to plan a batch job for the ALEREMOTE user.
    Does anybody has a solution for this? It's really urgent!!!
    Thanks in advance,
    Joerg

    Hi Joerg,
    You might opt to change the scheduling of the start step of your process chain so that it is triggered by an event. Here are the steps:
    1) Define an event in SM62
    2) Change your process chain so that it is triggered by the event you created in step 1.
    3) Change your ABAP code (that responds to the button in your BSP application...the planning function i think). You can then use the function module BP_EVENT_RAISE to trigger the event you created in #1.
    Advantage:
    The users don't need the extra authorizations.
    Disadvantage:
    In contrast to using the RSPC_API_CHAIN_START function module, you won't immediately know whether the process chain was started successfully (you might have to call another FM to check the status).
    If you can't change the trigger for the process chain, then the longer solution would be to construct an ABAP program that will execute the RSPC_API_CHAIN_START, schedule the program in a background job (to run under a powerful user id),  set the background to be triggered by an event, trigger the event when the user clicks the button.

  • How to start new backups WITHOUT encryption

    I'm one of those people who forgot the password for their encyrpted iphone backups ... BUT luckily I found that out BEFORE I had the actual need to restore my iPhone from said backups.
    Now I'd like to start a new set of backups from my phone, this time WITHOUT the encryption so I won't run into any troubles when I actually need them.
    Howevery, even after deleting all old backups in iTunes I still can't uncheck the "encrypt backup" box.
    Is there any way of getting a fresh start on backups?

    You have to restore as new using iTunes.
    Make sure in iTunes with your iPhone connected and selected, Summary pane, Encrypt local backup is OFF.

  • How I start smart view without error message?

    Hello,
    we use Oracle Smart View 11.1.2.5.215 and Office Professional Plus 2010 SP 2.
    The installation run in an AppV 4.5 SP 2 Environment.
    Smart View starts with the following error message:
    Failed to create Smart View Extension Activator object. Verifiy that it is registered properly (-2147221164)
    We have the newest .NET installation and install the excel shared features.
    Directly of the server Smart View starts correctly.
    The message just appears when Smart View starts over the NetMan Applications Link (Citrix + AppV).
    Please help!
    Thx, John

    Hello,
    now its several months ago that we post our Smart View problem.
    Till now we have no solution. The oracle support can't help us
    because we use AppV .
    Use someone else Smart View in an AppV environment?
    We want to go live soon and must handle the error message.
    Thank you for your Support

  • How to start laptop without keyboard

    MacBook (2 Ghz Intel Core Duo). Made in 2006, I believe.
    The keyboard seems to be hosed. I spilled a bit of something into it, tried to wash it out with distilled water, dried it carefully. There seems to be something wrong with the "start" key. I don't know if there are other problems because the machine won't start.
    I don't see any replacement keyboards on eBay.
    Maybe I'll try to use it with an external USB keyboard. But how to start the machine without the keyboard? The start button is built into the keyboard.
    Thanks in advance.
    Tim

    I have a question When using a macbook late 2006 with a bootcamp partitions to run Windows Vista Home Premium. And using a Itt-tech Microsoft 2007 Professional. What keys do you use to take a screen shot and print screen to Clipboard on Office Word? I new to Mac discusion forum. I bought my first mac In 1999 It was a Blue and white G3 with a 300 Mhz processor. With dial up internet!! Macs have come a long way.

  • How to Start Essbase without using OPMN in 11.1.2.1

    All,
    We have installed and configured Essbase 11.1.2.1 successfully on 64 bit AIX server. Now I need to know how to start the essbase without using OPMN?
    As we can start essbase using :-

<EPM_ORACLE_HOME>\user_projects\epmsystem1\bin\startEssbase.bat

; But this method will still use OPMN, if OPMN is not running it will first start up the OPMN processes and then start up Essbase.

    As we are not using Essbase clustering and so do not find OPMN more beneficial and moreover OPMN is not working properly to start any processes. so we just do not want to use OPMN in starting the essbase.
    is there any workaround to just skip the OPMN while starting/stopping/restart essbase?
    Thanks in advance,

    In 11.1.2.0 there was startEssbase.bat at <EPM_HOME>\user_projects\epmsystem1\EssbaseServer\essbaseserver1\bin\startEssbase.bat

    which basically just called setEssbaseEnv.bat which sets a number of variables, one being %ESSBASEPATH% which points to <EPM_HOME>\EPMSystem11R1\products\Essbase\EssbaseServer
    Then called %ESSBASEPATH%\bin\essbase.exe
    This bypasses opmn
    Now in 11.1.2.1 Oracle removed <EPM_HOME>\user_projects\epmsystem1\EssbaseServer\essbaseserver1\bin\startEssbase.bat

    but still left setEssbaseEnv.bat, it is possible to call setEssbaseEnv.bat and then %ESSBASEPATH%\bin\essbase.exe
    Essbase starts up fine and bypasses opmn.
    I would have thought it would be possible on other OS types as long as the environment variables are set first being starting up essbase.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Start X11.app without xinerama

    Hi All,
    Does anybody know how to start X11.app without the xinerama option in Xquartz?
    Do I need to change the .xinitrc and how?
    Thank you in advance for the help.
    G5 Biproc 2GHz   Mac OS X (10.4.8)  

    Java applications will only work if the classpath is set properly. Thus if you double-click on a JAR (or something else associated with Java) you might find that nothing seems to happen. Usually it'll open a DOS windows, start Java, chuck an Error and close the window quickly.
    This doesn't mean that you should go round setting the system classpath to get all your applications to run - that's a recipe for disaster!
    Sometimes it's best just to create a new shortcut for your application, specifying the full Java command for running your application and click on that:
    javaw.exe -cp [your classpath here] MyMainClass
    or
    javaw.exe -cp [your classpath here] -jar MyMainJar.jar
    If the classpath gets long, though, this won't work 'cos Windows will only allow a certain length for the shortcut. You'll have to use an external file to list the classpath contents then. I doubt this will affect you yet, however.
    Hope this helps.

  • How to retrieve all external refereces in a frame maker file without conditional text of hidden

    How to retrieve all external refereces in a frame maker file without conditional text of hidden

    Hi,<br />Finally I found the solution of the above problem.<br />Use following interface-function combination.<br />///////////code start<br />UIDList lst = Utils<IInCopyWorkFlowUtils>()->GetInCopyStories(doc);<br />for(int32 index = 0;index < lst.Length();index++)<br />{<br /><br />UIDRef incopyStory = Utils<IInCopyWorkFlowUtils>()->GetContainingInCopyStory(lst.GetRef(index));<br />if(incopyStory == UIDRef::gNull)<br />{<br />                                             break;<br />}<br />IDataLink * dLink = Utils<IInCopyBridgeUtils>()->QueryDataLink(incopyStory);<br />if(dLink == nil)<br />{<br />     break;<br />}<br />}<br />//////code end

  • How can i do a factory reset in snow leopard without the disk to start off new without losing my other programs

    how can i do a factory reset on snow leopard without the disk to start off new without losing my programs?

    You can't. You will need a Snow Leopard disc. You can purchase replacements for your computer from Apple:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Apple - Support - Contact Apple Support.
    A "factory reset" means you erase the drive securely. All of your files will be removed permanently. I suggest you make a backup:
    Clone using Restore Option of Disk Utility
      1. Open Disk Utility in the Utilities folder.
      2. Select the destination volume from the left side list.
      3. Click on the Restore tab in the DU main window.
      4. Select the destination volume from the left side list and drag
           it to the Destination entry field.
      5. Select the source volume from the left side list and drag it to
          the Source entry field.
      6. Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.

  • How do you remove files from your start up disk without deleting any files?, How do you remove files from your start up disk without deleting any files?

    Hi,
    I was wondering if anyone knew how to remove files from the start up disk without deleting any files?
    I am unable to add any more photos and even download the latest updates because the start up disk is full....
    Is it possible to move the files off the start up disk without deleting them?
    I would appreciate feedback,
    Thanks
    Sammy

    Well you can move them to an external drive but this will delete them from the internal drive. Which is what you have to do to free up disk space.

  • "I just updated the software on my iphone 4 and prior to updating I could double click and start the camera without logging in, now I can't.  How do I fix?

    I just updated the software on my iphone 4 and prior to updating I could double click and start the camera without logging in, now I can't.  How do I fix?

    Nothing to fix...things have changed...slide the camera icon up now..no more double tap.

  • I need to make a pdf document, made in photoshop, 'page turn' and then add it to my website. I know I can do this in indesign but indesign will not open pdf files for some inexplicable reason. Any ideas how I can do it without completely starting again?

    I need to make a pdf document, already made in photoshop, 'page turn' and then add it to my website as an e-brochure. I know I can do this in indesign but indesign will not open pdf files for some inexplicable reason. Any ideas how I can do it without completely starting again?

    Hello waitingone,
    please try this (all terms are translated from my German programs to my best knowledge):
    1. Did the creator of the pdf file enable the import options?
    2. See import options: choose an other visibility option for your layer.
    3. Let you show the import options and click into one with a black background and try these out (often a gray is selected).
    4. See trimming: try the different modes there. Often works: "Media".
    5. Is the pdf file (eg from Word) correctly created?
    6. Is the PDF file protected? >>> no import possible.
    7. If that does not help, store the pdf file in Acrobat, repair possible errors, run the PDF Optimizer before placing in InDesign.
    Good luck!
    Hans-Günter

  • I have all of my music on my dad's apple ID (on my Macbook pro and iphone). I want to start using my own apple ID (the one that my iPhone uses for everything except iTunes store) as my iTunes apple ID - how do I do this without losing my old music?

    I have all of my music on my dad's apple ID (on my Macbook pro and iphone). I want to start using my own apple ID (the one that my iPhone uses for everything except iTunes store) as my iTunes apple ID - how do I do this without losing my old music?

    Authorize your computer with your Dad's AppleID.

Maybe you are looking for