How to Start/Stop from Server Manager

Hello,
I am trying to figure out how to start/stop/restart my coldfusion servers from server manager. I have seen the instruction at this link:
http://help.adobe.com/en_US/ColdFusion/9.0/Admin/WSfd7453be0f56bba4-2a6b48f122a6582c7f-7ff e.html
However it mentions "place the jrunappstartup.war file under the directory <CF_Home>/runtime/servers/admin"
I do not know where to get this file from. Please help!
I am running ColdFusion standalone.
Any help is much appreciated,
Thanks,
David

An update to eariler posting. Configure CF9 Enterprise multiserver.
Likewise unable to find jrunappstartup.war file mentioned.
If I follow the instructions and try configure the SM Start Stop Details the Start Stop Restart
does not become an highlighted option.
Here are a couple screen cuts for interested readers-
Start Stop Details (are these correct Jrun items to fill in?):
Unable to restart from SM:
Regards, Carl.

Similar Messages

How to start/stop report server?

Dear memebers,
when i restart my machine the report don't run. and give the following errro: frm-41213 unbale to connect to the report server.
how to start/stop the report server?
i have installed the DS 10g.
Thanks
Muhammad Nadeem
[email protected]

I try to find same solution from three month , i think first you intsall report server
and check that if in server/conf folder rep_<hostname> file is there than your report is running with in process method in that you are not able to run report with report server , if you get solution than please give me the same

How to start streaming from server side after applet initialized on client

Hi,
I am using JSP for on demand streaming server.
I have included an applet in jsp page which start new player on client side after on streamreceive event.
But my problem is how to give call to server that applet on client side has been initialized and now streaming can go on.
Is there any method / way to call class file which will start streaming?

Oracle is designed to support connection from client to server. The client originates the connection.
If you want the server to initiate the connection, you need to make the server pretend it is a client. Oracle even does this internally, when they want to use 'External Procedures'
You may also use Oracle's Message Queue mechanism, called 'Advanced Queueing' to use a 'publish subscribe' model instead of a connection model. That is discussed in the Advanced Queue manual in the documentation at http://docs.oracle.com
Finally, you can explore the possibility of using RMI from the database, as discussed in the Java related documentation at the same location.

How to start Oracle Application Server 10g on Linux

Hi,
I have installed the Oracle Appliacion server and Infrastructure server on Linux. Both I have installed under with Diff. folder
Can some one please tell me how to start / stop Appliacion server and Infrastructure server on Linux
We are going to use the these with Oracle EBS 11.5.10.2 .
Oracle EBS 11.5.10.2 installed in the same Linux server under diff. folder
Can some one please guide me.
Thanks,

You can do as rizla said or go another route.
We setup profiles to use for all of the oracle homes. Then in the scripts we call the profiles. Easier to migrate and manage in my opinion if you have multiple oracle homes. You can then use profiles when ssh'd into the boxes, too. Both ways will work.
Example:
Script which you can chkconfig.
#!/bin/sh
# oracle_collabInfra
# This shell script takes care of starting and stopping Oracle Collab Infra instance.
#chkconfig: 345 96 14
# Source function library.
. /etc/rc.d/init.d/functions
RETVAL=0
start () {
echo $"Starting Collab Suite on the Infra instance..."
echo $"Starting Listener..."
runuser - oracle -c ". /home/oracle/.collabInfra_profile; lsnrctl start"
sleep 10
echo $"Starting Metadata Repository..."
runuser - oracle -c ". /home/oracle/.collabInfra_profile; sqlplus '/ as sysdba' <<!
startup;
exit;
sleep 10
echo $"Starting Enterprise Manager Application Server Control..."
runuser - oracle -c ". /home/oracle/.collabInfra_profile; emctl start iasconsole"
sleep 5
echo $"Starting Infra OID and OC4J_Security processes..."
runuser - oracle -c ". /home/oracle/.collabInfra_profile; opmnctl startproc process-type=OID"
runuser - oracle -c ". /home/oracle/.collabInfra_profile; opmnctl startproc process-type=OC4J_Security"
echo $"Starting Infra HTTP_Server processes..."
runuser - oracle -c ". /home/oracle/.collabInfra_profile; opmnctl startproc process-type=HTTP_Server"
return $RETVAL
stop () {
echo $"Stopping Collab Suite on the Infra instance..."
echo $"Stopping all Infra OPMN managed processes..."
runuser - oracle -c ". /home/oracle/.collabInfra_profile; opmnctl stopall"
sleep 5
echo $"Stopping Enterprise Manager Application Server Control..."
runuser - oracle -c ". /home/oracle/.collabInfra_profile; emctl stop iasconsole"
sleep 10
echo $"Stopping Metadata Repository..."
runuser - oracle -c ". /home/oracle/.collabInfra_profile; sqlplus '/ as sysdba' <<!
shutdown immediate;
exit;
sleep 10
echo $"Stopping Listener..."
runuser - oracle -c ". /home/oracle/.collabInfra_profile; lsnrctl stop"
return $RETVAL
restart () {
stop
start
RETVAL=$?
return $RETVAL
# See how we were called.
case "$1" in
start)
start
stop)
stop
restart)
restart
echo $"Usage: $0 {start|stop|restart}"
RETVAL=1
esac
exit $RETVAL
profile:
export ORACLE_BASE=/opt/oracle
export ORACLE_HOME=$ORACLE_BASE/collabInfra
export ORACLE_SID=orcl
export TMP=/tmp
export TMPDIR=/tmp
export LD_LIBRARY_PATH=$ORACLE_HOME/lib
export PATH=/bin:/usr/bin:/usr/sbin:/usr/bin/X11:/usr/kerberos/bin:/usr/local/bin:/usr/X11R6/bin:$HOME/bin:$ORACLE_HOME/bin:$ORACLE_HOME/opmn/bin:$ORACLE_HOME/dcm/bin:$ORACLE_HOME/backup_restore
unset USERNAME

How to start/stop Event Mgr. and RFID information server?

I take over our form RFID admin (who quit) position.
I cannot find any document which tells me How to start/stop Event Mgr. and RFID information server.
Even the "Sun Java System RFID Software 3.0 Administration Guide" does not have this piece of info.
Would you please help? Points guaranteed. Thanks!

Ashley you are still not clear to me.
Please mention what applications are these??
Is it SAP Event Manager??
What is the RFID Information server??
Is it SAP based, or some other vendor??
How is the integration done?
Thanks

How to Start / Stop Oracle Applications

How to Start / Stop Oracle Applications.
Oracle Applications Services (TCF, ConcManagers, Metric, Forms, Reports etc...) TnsListner & Oracle Service (DB) are started when the Server is started.
What is the sequential Order to Start / Shutdown services, Listener & DB.
Best regards,

hi
there is no hard coded rule on which service should be started first.
the basic thing is concurrent manager uses database for starting, so i advice you the following sequence:
1. start the database
2. start the database listener
3. Apache server
4. forms server
5. report server
6. concurrent manager
and shutdown in the reverse order
simple
regards
srinivas

How do starting/stopping of application services differ in R12 ??

How do starting/stopping of application services differ in R12 when compared to 11i ??
Can I start/stop services using opmnctl ??

Can you plese refer me a document where role of OPMN and OC4J in R12 is mentioned ??? In short:-
OPMN - Oracle Process Manager & Notification Server is component in Oracle Application Server (10g) to manage (start/stop/status) Application Server components (HTTP, OC4J)
For more:-
http://download.oracle.com/docs/cd/B14099_19/core.1012/b13996/intro.htm
OC4J -- oracle container for java.
In R12 we have 3 groups of OC4J's.
oacore OC4J - framework based applications
forms OC4J - forms based applications
oafm OC4J - Fusion Middleware - for mapviewer, webservices, ascontrol.
For more, pls read
http://download.oracle.com/docs/cd/B10464_05/web.904/b10326/intro.htm
thanks,
JD

How to start the oc4j server

I install oracle 9ias 9.0.3,but i don't know how to start the oc4j server.
thanks for any help?

hi
Refer "Starting and Stopping OC4J" from
http://otn.oracle.com/tech/java/oc4j/doc_library/902/A95880_01/html/toc.htm
hope this helps.
shrini

Can not start/stop fullfilment server after fresh install

Can not start/stop fullfilment server after fresh install
Product: e-business suite (11.5.9)
Platform: Win XP 5.1 (SP2)
We have performed a new installation of ebusiness suite in our windows platform.
Installtion went with out any problem.
But we can not start/stop the fullfilment server. While trying to start/stop the server we are getting follwing error message:
c:\oracle11i\prodcomn\admin\scripts\PROD_03274019ih\jtffmctl.cmd start
script returned:
C:\oracle11i\prodcomn\admin\scripts\PROD_03274019ih>echo off
You are running jtffmctl.cmd
Mon 13/09/2004
01:46 PM
"Starting Fulfillment Server for "PROD" on port "9300" ...\n"
"Error returned while running OUI"
ERRORCODE = 1 ERRORCODE_END
.end std out.
Class not found: oracle.apps.jtf.fm.engine.processor.Processor
Please let us know how to fix this issue.
Regards, Kunal

edit the jtffmctl.cmd and make sure that it point to the correct java path, alse try to use java 1.4.1

How to start/stop an Xserver?

Gurus:
Would you please help tell how to start/stop an Xserver?
Thanks!

Hi Linda Li,
Basically it depends on enviroment and If it's unix then it depends on how you configure your scripts in /etc/init.d
1. If you are looking for on how to start & stop XServer for environment APO/LiveCache & MaxDB then below are commands
x_server [<options>] [start]
x_server stop
2. If its on general UNIX then
If you're in X and want to stop it, bring up the terminal window and type:
init 3
To start X from the command line, type either:
startx
or
init 5
I hope this helps you.
Thanks and best regards
Sekhar

Starting/stopping mobile server

Hi
This is a two part question dealing with the starting and stopping of mobile server...
To start the mobile server via win cmd line, I use java -jar oc4j.jar. How should I stop the server in this scenario? I have been using cntr-C in the dos window, I'm hoping there's a better way, but I haven't found any mention of it in the docs.
Secondly, when I install the windows service to start/stop mobile server, I am not able to login to the mobile server's administrative console - does anyone know the reason for this?
Thanks,
Tim

In recent windows xp systems there is a command line tool named "kill" or something like that, to kill the process like unix systems (kill pid).
Also, killing the java process with ctrl/alt/suppr or using tools like process explorer (sysinternals) can achieve this.
For the second problem, also check if you have installed the repository in a back-end database (SYSTEM's password needed while installing mobile server). If you did not install the repository in back-end database this could also be the problem, I think.

How to get file from server while click on link

Hi,
i created on link and i gave one server path to select file from server but while clickinng on link it no displaying any thing.
following is the Destination url that i gave for the item.
/u08/app/appvis/xxex/inst/xxex_apps/xxrbe/logs/appl/conc/log/
please tell me how to get file from server while click on link.

Ok I got your requirement now.
If you are getting file names from view attribute then you should not be adding destination URI property for the link.
Instead you can use OADataBoundValueViewObject API.
Try below code in your controller processRequest method:
I am assuming that you are using classic table.
Also in below example it considers OAMessageStyleText and you can replace it with link item if you want.
OATableBean tableBean =
(OATableBean)webBean.findChildRecursive("<table item id>");
OAMessageStyledTextBean m= (OAMessageStyledTextBean)tableBean.findChildRecursive("<message styled text in table item id>");
OADataBoundValueViewObject tip1 = new OADataBoundValueViewObject(m, "/u08/app/appvis/xxex/inst/xxex_apps/xxrbe/logs/appl/conc/log/"+"<vo attr name which stores file name for each row>");
m.setAttributeValue(oracle.cabo.ui.UIConstants.DESTINATION_ATTR, tip1);
Regards,
Sandeep M.

Batch / script file to start /stop sap server

Hi,
 I would like to start/stop SAP server using batch file (in windows). I need this, whenever we have to shutdown the server and restart of the server, so that SAP will automatically shutdown and restart using batch files while server restart cases? If anyone knows, please let me know. Thanks,
Regards,
Sundar.

target of the 700 sapstartsrv improvement was to deliver identical functionality on all SAP platforms. As the DCOM programing model is only available on Windows platforms sapstartsrv.exe was enhanced by the WEB-Service interface and is available now on Unix too.
The DCOM SAPControl interface of sapstartsrv.exe is still existing, but only on Windows. Here you can use VB Script or any other programming language able to handle DCOM objects to write your own programs / scripts to interact with the SAPControl.
sapcontrol.exe is a command line program available since 700 which enables you control over nearly all functions of the sapstart service.
Even it has the same name as the DCOM interface it' something completly different.
regards
Peter
PS: sapcontrol syntax
usage: sapcontrol [
 -prot GSOAP_HTTP| http using gsoap build in sockets (default)
 NI_HTTP| http using SAP NI sockets (prefer Unix domain sockets)
 NI_HTTPS| https using SAP NI sockets (prefer Unix domain sockets)
 WINHTTP| http using Windows winhttp
 WINHTTPS| https using Windows winhttp
 PIPE Windows named pipes
 [-user <user> <password>] OS user and password for Webservice authentication
 [-repeat <N> <D>] Repeat Webmethod call <N> times (-1=forever) with <D> sec delay
 -format list| List output format (default)
 script Script output format
 [-host <hostname>] Host to connect to (default: localhost)
 -nr <instance nr.> SAP Instance number to connect to
 -function <Webmethod> [parameter list]
Webmethods: Start
 Stop [softtimeout sec]
 Shutdown
 RestartInstance [softtimeout sec]
 StopService
 StartService <SID>
 RestartService
 ParameterValue [<parameter>]
 GetStartProfile
 GetTraceFile
 GetAlertTree
 GetAlerts
 GetEnvironment
 GetVersionInfo
 GetQueueStatistic
 GetProcessList
 GetInstanceProperties
 ListDeveloperTraces
 ReadDeveloperTrace <filename> <filesize>
 ListLogFiles
 ReadLogFile <filename> [<filter> [<language> [<maxentries> [<cookie>]]]]
 AnalyseLogFiles [<severity 0-2>] [<maxentries>] [<starttime YYYY MM DD HH:MM:SS> <endtime YYYY MM DD HH:MM:S
S>]
 OSExecute <command> <async> <timeout> <protocolfile>
 SendSignal <pid> <signal>
 GetSystemInstanceList
 StartSystem [ALL|SCS|DIALOG|ABAP|J2EE|LEVEL <level> [<waittimeout sec>]]
 StopSystem [ALL|SCS|DIALOG|ABAP|J2EE|LEVEL <level> [[<waittimeout sec>] [softtimeout sec]]]
 RestartSystem [ALL|SCS|DIALOG|ABAP|J2EE|LEVEL <level> [[<waittimeout sec>] [softtimeout sec]]]
 AccessCheck <function>
 ABAPReadSyslog
 ABAPReadRawSyslog
 ABAPGetWPTable
 J2EEControlProcess <processname> <function>
 J2EEGetProcessList
 J2EEGetThreadList
 J2EEGetSessionList
 J2EEGetCacheStatistic
 J2EEGetApplicationAliasList
 J2EEGetVMGCHistory
 J2EEGetVMHeapInfo
 StartWait <timeout sec> <delay sec>
 StopWait <timeout sec> <delay sec>
 WaitforStarted <timeout sec> <delay sec>
 WaitforStopped <timeout sec> <delay sec>
Exitcode: 0: Last Webmethod call successfull
 1: Last Webmethod call failed, invalid parameter
 2: StartWait, StopWait, WaitforStarted, WaitforStopped timed out
 3: GetProcessList succeeded, all processes running correctly
 4: GetProcessList succeeded, all processes stopped
Security: Trusted connects without user and password check are possible through
 Unix domain socket or Windows named pipes. Protected webmethods like
 Start or Stop require a trusted connection or OS user and password
 authentication.

HT2731 I have 2 iPhone 4's in my name. How do I stop from sharing my photos from one phone to the other. When I take a photo it shows up on my husbands phone and vise versa. We have our iCloud turned off

I have 2 iPhone 4's in my name. How do I stop from sharing my photos from one phone to the other. When I take a photo it shows up on my husbands phone and vise versa. We have our iCloud turned off in both phones.

well i think one of you should change yalls name on the iphone its may not be the icloud but the names

How to start the Message Server?

Hi,
I wish to start the J2EE engine and for the same it is mandatory to start the Message Server first.
In order to start the message server, I run the following command:
D:\usr\sap\J2E\SYS\exe\uc\NTI386>msg_server start
msg_server=>sapparam(1c): No Profile used.
msg_server=>sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
[Thr 7972] Wed Jul 25 23:39:18 2007
[Thr 7972] *** ERROR => MsSetWorkDir: chdir D:\usr\sap
D00\work [msntserv.c 170]
[Thr 7972] *** ERROR => MsSPrvInit: MsSetWorkDir [msntserv.c 87]
[Thr 7972] *** ERROR => mainU: MsSPrvInit [msxxserv.c 1634]
I gave my best time to search for Profile configuration details. But I could not do that.
Can somebody tell me how to start the Message Server?
regards,
Anand

Hi Anand,
Will be good to know what OS are you using...
If you're tryng to start an instance use <prompt>: startsap pf=<profile of the system you want to start>
If you logon as <sid>adm just type startsap
If for some reason you need to start only the message server try <prompt>: msg_server start pf=<profile of the system you want to start>
Regards
Juan
Please reward with points if helpful

How to Start/Stop from Server Manager

Similar Messages

Maybe you are looking for