How to start/stop an Xserver?

Gurus:
Would you please help tell how to start/stop an Xserver?
Thanks!

Hi Linda Li,
Basically it depends on enviroment and If it's unix then it depends on how you configure your scripts in /etc/init.d
1. If you are looking for on how to start & stop XServer for environment APO/LiveCache & MaxDB then below are commands
x_server [<options>] [start]
x_server stop
2. If its on general UNIX then
If you're in X and want to stop it, bring up the terminal window and type:
init 3
To start X from the command line, type either:
startx
or
init 5
I hope this helps you.
Thanks and best regards
Sekhar

Similar Messages

How to Start/Stop from Server Manager

Hello,
I am trying to figure out how to start/stop/restart my coldfusion servers from server manager. I have seen the instruction at this link:
http://help.adobe.com/en_US/ColdFusion/9.0/Admin/WSfd7453be0f56bba4-2a6b48f122a6582c7f-7ff e.html
However it mentions "place the jrunappstartup.war file under the directory <CF_Home>/runtime/servers/admin"
I do not know where to get this file from. Please help!
I am running ColdFusion standalone.
Any help is much appreciated,
Thanks,
David

An update to eariler posting. Configure CF9 Enterprise multiserver.
Likewise unable to find jrunappstartup.war file mentioned.
If I follow the instructions and try configure the SM Start Stop Details the Start Stop Restart
does not become an highlighted option.
Here are a couple screen cuts for interested readers-
Start Stop Details (are these correct Jrun items to fill in?):
Unable to restart from SM:
Regards, Carl.

How to start/stop report server?

Dear memebers,
when i restart my machine the report don't run. and give the following errro: frm-41213 unbale to connect to the report server.
how to start/stop the report server?
i have installed the DS 10g.
Thanks
Muhammad Nadeem
[email protected]

I try to find same solution from three month , i think first you intsall report server
and check that if in server/conf folder rep_<hostname> file is there than your report is running with in process method in that you are not able to run report with report server , if you get solution than please give me the same

How to start/stop Event Mgr. and RFID information server?

I take over our form RFID admin (who quit) position.
I cannot find any document which tells me How to start/stop Event Mgr. and RFID information server.
Even the "Sun Java System RFID Software 3.0 Administration Guide" does not have this piece of info.
Would you please help? Points guaranteed. Thanks!

Ashley you are still not clear to me.
Please mention what applications are these??
Is it SAP Event Manager??
What is the RFID Information server??
Is it SAP based, or some other vendor??
How is the integration done?
Thanks

How to Start / Stop Oracle Applications

How to Start / Stop Oracle Applications.
Oracle Applications Services (TCF, ConcManagers, Metric, Forms, Reports etc...) TnsListner & Oracle Service (DB) are started when the Server is started.
What is the sequential Order to Start / Shutdown services, Listener & DB.
Best regards,

hi
there is no hard coded rule on which service should be started first.
the basic thing is concurrent manager uses database for starting, so i advice you the following sequence:
1. start the database
2. start the database listener
3. Apache server
4. forms server
5. report server
6. concurrent manager
and shutdown in the reverse order
simple
regards
srinivas

How do starting/stopping of application services differ in R12 ??

How do starting/stopping of application services differ in R12 when compared to 11i ??
Can I start/stop services using opmnctl ??

Can you plese refer me a document where role of OPMN and OC4J in R12 is mentioned ??? In short:-
OPMN - Oracle Process Manager & Notification Server is component in Oracle Application Server (10g) to manage (start/stop/status) Application Server components (HTTP, OC4J)
For more:-
http://download.oracle.com/docs/cd/B14099_19/core.1012/b13996/intro.htm
OC4J -- oracle container for java.
In R12 we have 3 groups of OC4J's.
oacore OC4J - framework based applications
forms OC4J - forms based applications
oafm OC4J - Fusion Middleware - for mapviewer, webservices, ascontrol.
For more, pls read
http://download.oracle.com/docs/cd/B10464_05/web.904/b10326/intro.htm
thanks,
JD

How to start/stop process flow from sql*plus?

Hi,
i know how to start a process flow via sqlplus_exec_template.sql, but i cannot find any information on how to stop (and rollback) a working flow from sql*plus. Any help would be appreciated.
Greetings
Christoph
Message was edited by:
ctrierweiler

Hi,
I've had a go.
How should I interpret the results of list_requests:
owner_owr@ORKDEV01> @list_requests
====================
DEPLOYMENTS
====================
Audit ID Status Name Date Owner
2706 READY Deployment Fri Nov 11-NOV-05 10:49:59 OWNER_OWR
11 10:46:37 CET 2
005
====================
DEPLOYMENT UNITS
====================
Audit ID Status Name Date Owner
2707 READY Unit0 11-NOV-05 10:49:59 OWNER_OWR
====================
EXECUTIONS
====================
Er zijn geen rijen geselecteerd.
owner_owr@ORKDEV01>
Whilst a process flow is executing the last query will list executions, all of which have status BUSY:
owner_owr@ORKDEV01> @list_requests
====================
DEPLOYMENTS
====================
Audit ID Status Name Date Owner
2706 READY Deployment Fri Nov 11-NOV-05 10:49:59 OWNER_OWR
11 10:46:37 CET 2
005
====================
DEPLOYMENT UNITS
====================
Audit ID Status Name Date Owner
2707 READY Unit0 11-NOV-05 10:49:59 OWNER_OWR
====================
EXECUTIONS
====================
Audit ID Status Name Date Owner
394512 BUSY PF_ONB01 04-MEI-06 09:11:12 OWNER_OWX
395328 BUSY ONB:FULL_PREPARE 04-MEI-06 09:11:55 OWNER_OWR
395324 BUSY PF_ONB01:ONB 04-MEI-06 09:11:55 OWNER_OWR
owner_owr@ORKDEV01>
As an aside, I will attempt to get rid of the READY deployment and deployment unit using deactive_deployment.sql
Now, if I attempt to use deactivate_execution.sql on any of the executions with status BUSY I get:
owner_owr@ORKDEV01> @deactivate_execution
Voer waarde voor 1 in: 396136
declare
FOUT in regel 1:
.ORA-20003: The object is not in a valid state for the requested operation
ORA-06512: at "OWNER_OWR.WB_RTI_EXCEPTIONS", line 94
ORA-06512: at "OWNER_OWR.WB_RTI_EXECUTION", line 774
ORA-06512: at "OWNER_OWR.WB_RT_EXECUTION", line 90
ORA-06512: at line 4
owner_owr@ORKDEV01>
So all the seems to remain is to use abort_exec_request.sql
This does the job, but the script itself hangs.
I think it has to do with the l_stream_id not being checked again after the initial IF. I think it should probably be part of the loop condition as it is again reset in the do_acks inside the loop.
Cheers & thanks,
Colin

How to start & stop SAP J2EE services.

Hello,
Can anyone tell me the steps how to Start and Stop SAP J2EE operations and how to troubleshoot the problems when the Java doesn't come-up.
Regards,
Murali

Hi,
In windows,
go to SAP management console,Right click on the SID and then start all tasks
similarly to stop,Right click,
stop all tasks
If it is linux machine,
switch to SIDadm user,by giving the command su sidadm
ex:if SID is J2E,then it will be j2eadm.and then it is startsap or stopsap.
For troubleshooting,
1.go to /usr/sap/SID/JCxx/j2ee/cluster/server0/log
look for defaulttrace.trc file.
you can get to know the errors here and find teh root cause of it.
2.you can also look for devp_trace in SAPmanagement console.
3.Before doing all this,first check if JAVA_HOME,path and LD_LIBRARY_PATH is set properly and proper JDK is taken.
4.check id DB is up and running.
reward points if helpful
Message was edited by:
usha rani

How to start / stop nodes without domain-controller / automatically on Win?

Hi,
we have a distributed installation of CMSDK 9.0.4.
We have installed a 9.2.0.4 Database on Solaris and we are using the 10g(9.0.4) Infrastructure on Solaris with it.
The first installation of CMSDK uses a J2EE-MidTier installation on the Solaris server and contains the CMSDK domain controller and a normal node with nfs protocol server running.
The other installations are done on Win2003 Blades. Currently we are using two Blades. On each there is a J2EE-MidTier installation and within these we have installed CMSDK with HTTP-Node and normal node. We are using NTFS-Server within the normal nodes.
The Blades are within one Domain and we have NLB-Cluster activated for both.
The whole thing sounds complex, but it works fine. We only have some trouble regarding start/stop of the nodes:
1. If the solaris backend fails, our cluster-configuration tries to stop and start cmsdk. While stopping cmsdk, all nodes - even those on the Win-Servers - are stopped. But starting does not bring em up again automatically.
2. If a Windows Server is booted, the normal node does not start automatically.
3. If one Windows Server is not available, the ifsctl check takes a very long time because it's trying to get information from the missing one.
Is there a way to restart the domain controller and node on solaris without stopping the nodes on Windows?
How can we start the windows nodes automatically after reboot?
Is there a way to probably start the nodes without being managed / guarded by the domain controller?
Thanks for help,
Alex

Try adding this script to your /etc/init.d directory:
#!/bin/sh
ifsctl start << EOF
<ifsctl password>
EOF
Replace <ifsctl password> with the password that you would give at the prompt.
It will complain about Inappropriate ioctl for device, but it works.

How to start/stop network sharing??

I would like to know how to start my mac as a server, and how to stop it from being seen by someone else in the network. I recently used a colleague's machine, and to my surprise, I was able to see my computer in the network as a server, i could access my files and it scared the beejesus out of me...any hints??
thanks

Check  | System Preferences | Sharing | Firewall.
If it says "Firewall Off" then click on the Start button.
If it says "Firewall On" then uncheck any unwanted services in the list here and also in the "Services" panel (which is all the stuff that is grayed out on the "Firewall" panel).
If it says "Firewall On" and you don't have any services checked in the "Services" and "Firewall" panels, then we will need more info and checks to ascertain what is going on. But let's do the easy checks first.

How to start/stop/restart a java desktop application from remote machine

Hi,
I want to know is there a way in java where i can start/stop/restart a java desktop application running on a remote machine through another java desktop application?
For e.g i have an Admin console which monitors its clients based on socket communication, all of them are java desktop applications. I want to also give start/stop remote clients through my Admin console.
I am thinking in terms of windows system service which can start/restart/stop my clients on request of Admin console, but how can i call this system service remotely?
How can i do it?

I got it. its about connection...

How to Start/Stop manually an oracle 9i database with a bat file?

Hi;
I have a manual Start/Stop of the db.
How can i Start/Stop the 9i database all services with a batch file (windows 2000) ?
All in one batch files ( One for Start & one for Stop)(Including listener)
thanks for your answer !

Save the scripts below in a batch file and use the first one to start your services, and the second one to shutdown.
This script will shutdown your database first using SQL*Plus and stop the service later. This way you will avoid the timeout.
Also will ask you for confirmation if you are sure to start Oracle services and database. press Y for yes and N for No.
@echo off
%systemdrive%
REM #
echo.
echo You are about to start Oracle Services and Database
echo.
set /p Input=Do you want to continue? (Y=Yes N=No) =
IF /i "%Input%"=="Y" (goto Proceed)
exit /b
:Proceed
echo Oracle Instance and Services Startup in progress
echo.
Net start OracleOraHome92Agent
Net start OracleOraHome92HTTPServer
Net Start OracleOraHome92TNSListener
Net Start OracleMTSRecoveryService
Net Start OracleServiceORCL
echo.
echo Oracle ORCL Instance and Services Startup completed Successfully
echo Good Bye
echo on
EXIT /BSave this one in a seperate batch, again it will ask for confirmation, and shutdown the database using SQL to avoid timeout
Just replace the connect string with your own and the {SID} with your Database name
@echo off
%systemdrive%
echo.
echo You are about to shutdown Oracle Instance and Services
echo.
set /p Input=Do you want to continue? (Y=Yes N=No) =
if /i "%Input%"=="y" (goto Proceed)
exit /b
:Proceed
echo.
echo Closing and Dismounting ORCL Database
echo.
echo shutdown immediate | sqlplus "/ @ORCL as sysdba"
echo.
echo Shutting down Oracle system services
echo.
Net Stop OracleService{SID}
Net Stop OracleOraHome92HTTPServer
Net Stop OracleOraHome92TNSListener
Net Stop OracleMTSRecoveryService
Net Stop OracleOraHome92Agent
echo.
echo Oracle Instance and Services Shutdown completed successfully
echo Good Bye
echo on
EXIT /bTony Garabedian

How to start, stop and restart task

Hello Everyone,
Need advice on what is the correct way to start, stop and restart a Java task?
I have tried with Executors.newCachedThreadPool() or fixedThreadPool() however I was only able to submit the task once. My program crashed when i tried to resubmit the task again after a shutdownnow command()

Tasks are designed to be run once. If you want restart functionality, use a service:
http://docs.oracle.com/javafx/2/api/javafx/concurrent/Service.html
The sample service I posted in the following thread demonstrates how to do this:
Multithreading
Use of Executors is not necessary as a Service encapsulates the execution thread management (though you can set your own executor on the service if you really needed it). All you need to do is make use of the service start, cancel, restart and reset methods as required. If you do use the cancel method, then you need to make sure that your service is properly interrupt aware for the cancel to function as you expect.

How to start/stop oracle 9i databases in aix

please provide me details steps of start/stop oracle 9i database in aix . we have four nodes .So i would like to know the steps of shutting down database including all nodes & also starting up and any prerequisite?
Edited by: apusumit on Jun 10, 2011 5:32 AM
Edited by: apusumit on Jun 10, 2011 5:35 AM
Edited by: apusumit on Jun 18, 2011 7:01 AM

apusumit wrote:
please provide me details steps of start/stop oracle 9i database . we have four nodes .So i would like to know the steps of shutting down database including all nodes & also starting up and any prerequisite?
Edited by: apusumit on Jun 10, 2011 5:32 AMrefer the link:-
http://www.puschitz.com/InstallingOracle9iRAC.shtml#StartingAndStoppingOracle9iClusterManager
also,
please post the question in
Forum Home » Grid Computing » Real Application Clusters
Good Luck.

How to start/stop an adapter

Hi all,
Is there any transaction to start/stop an adapter.
Whats the procedure?
Regards,
felix.

Hi Felix,
the IB has to be up and running to be able to start or stop it, e.g. if the java stack in not up, no chacne to stop it. We had a problem when the java stack comes up in XI 3.0 it starts all the adapters and if you have an FTP adapter it starts to pull the file. Then the file had 100 MB and XI produced an out of memory and restarted the java stack. That went into a loop and no way to start or stop the adapter. If you ever face this, you basis guy has to rename the sap ftp program so that the adapter fails.
Cheers
Stefan

How to start/stop an Xserver?

Similar Messages

Maybe you are looking for