How to start WLS in RedHat 6.2

Hi everyone,
Everytime when I try to start WLS in RedHat with the command -
./startWebLogic.sh in command line console,
an error - "Don't know how to set the shared library for Linux" is displyed.
Could anyone help me solve this problem at your earliest convenience sine
it is quite urgent to me to solve this problem?
Thanks in advance

Open startWebLogic.sh
look for label LINUX)
substitute the line with
LINUX | Linux)
and try again.
Marco.
Rex Law <[email protected]> wrote in message
news:[email protected]..
Hi everyone,
Everytime when I try to start WLS in RedHat with the command -
./startWebLogic.sh in command line console,
an error - "Don't know how to set the shared library for Linux" isdisplyed.
>
Could anyone help me solve this problem at your earliest conveniencesine
it is quite urgent to me to solve this problem?
Thanks in advance

Similar Messages

Unable to start server in RedHat 7.2

After doing the install, I run the startWebLogic.sh file and after a few
moments, I get a bunch of security exceptions and the server dies. Does
anyone have any ideas on where I can goto to look and see what is going
wrong?
Thank you.

Open startWebLogic.sh
look for label LINUX)
substitute the line with
LINUX | Linux)
and try again.
Marco.
Rex Law <[email protected]> wrote in message
news:[email protected]..
Hi everyone,
Everytime when I try to start WLS in RedHat with the command -
./startWebLogic.sh in command line console,
an error - "Don't know how to set the shared library for Linux" isdisplyed.
>
Could anyone help me solve this problem at your earliest conveniencesine
it is quite urgent to me to solve this problem?
Thanks in advance

How to start the Oracle 8i client in redhat 7.2?

I have installed properly oracle 81 client and server properly.
I wanna access anothe linux server. But I don't know how to
start the clent ?..And what are should be done to access the
remote oracle server?
Thanks

apusumit wrote:
please provide me details steps of start/stop oracle 9i database . we have four nodes .So i would like to know the steps of shutting down database including all nodes & also starting up and any prerequisite?
Edited by: apusumit on Jun 10, 2011 5:32 AMrefer the link:-
http://www.puschitz.com/InstallingOracle9iRAC.shtml#StartingAndStoppingOracle9iClusterManager
also,
please post the question in
Forum Home » Grid Computing » Real Application Clusters
Good Luck.

How are duplicate parameters handled when starting WLS?

I was given some memory tuning suggestions for WLS and told to set them in $USER_MEM_ARGS. However, when I try to start the AdminServer I am getting an error "Invalid initial heap size: -Xms512m". This puzzles me because it looks like that was the original heap size. I am wondering if it is because the parameter appears twice.
So my question is, "If a parameter is used twice, is the first one used? the last one? or is it an error?"
Now to see if I can add an image. Guess not. Soooo... note -Xms=512m appears twice.
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://hostname:port/console *
RRP Debugging...
$SERVER_NAME: AdminServer
$JAVA_VENDOR: Sun
$USER_MEM_ARGS: -Xms=512m -Xmx=512m -Xns=128m -d64 -XgcPrio:throughput -XXnoSystemGC -Djava.security.egd=file:/dev/../dev/urandom -XX:PermSize=128m -XX:MaxPermSize=256m -XX:PermSize=128m -XX:MaxPermSize
starting weblogic with Java version:
java version "1.6.0_25"
Java(TM) SE Runtime Environment (build 1.6.0_25-b06)
Java HotSpot(TM) 64-Bit Server VM (build 20.0-b11, mixed mode)
Starting WLS with line:
/app/oracle/product/ofm/jdk1.6.0_25/bin/java -server -Xms=512m -Xmx=512m -Xns=128m -d64 -XgcPrio:throughput -XXnoSystemGC -Djava.security.egd=file:/dev/../dev/urandom -XX:PermSize=128m -XX:MaxPermSize=256m -XX:PermSize=128m -XX:MaxPermSize -Dweblogic.Name=AdminServer -Djava.security.policy=/app/oracle/product/ofm/wlserver_10.3/server/lib/weblogic.policy -Dweblogic.ProductionModeEnabled=true -da -Dplatform.home=/app/oracle/product/ofm/wlserver_10.3 -Dwls.home=/app/oracle/product/ofm/wlserver_10.3/server -Dweblogic.home=/app/oracle/product/ofm/wlserver_10.3/server -XX:PermSize=256m -XX:MaxPermSize=512m -Dcommon.components.home=/app/oracle/product/ofm/oracle_common -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=/app/oracle/product/ofm/user_projects/domains/IDMDomain -Djrockit.optfile=/app/oracle/product/ofm/oracle_common/modules/oracle.jrf_11.1.1/jrocket_optfile.txt -Doracle.server.config.dir=/app/oracle/product/ofm/user_projects/domains/IDMDomain/config/fmwconfig/servers/AdminServer -Doracle.domain.config.dir=/app/oracle/product/ofm/user_projects/domains/IDMDomain/config/fmwconfig -Digf.arisidbeans.carmlloc=/app/oracle/product/ofm/user_projects/domains/IDMDomain/config/fmwconfig/carml -Digf.arisidstack.home=/app/oracle/product/ofm/user_projects/domains/IDMDomain/config/fmwconfig/arisidprovider -Doracle.security.jps.config=/app/oracle/product/ofm/user_projects/domains/IDMDomain/config/fmwconfig/jps-config.xml -Doracle.deployed.app.dir=/app/oracle/product/ofm/user_projects/domains/IDMDomain/servers/AdminServer/tmp/_WL_user -Doracle.deployed.app.ext=/- -Dweblogic.alternateTypesDirectory=/app/oracle/product/ofm/oracle_common/modules/oracle.ossoiap_11.1.1,/app/oracle/product/ofm/oracle_common/modules/oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dem.oracle.home=/app/oracle/product/ofm/oracle_common -Djava.awt.headless=true -Didm.oracle.home=/app/oracle/product/ofm/Oracle_IDM1 -Xms512m -Xmx1024m -Xss512K -Djava.net.preferIPv6Addresses=true -DuseIPv6Address=true -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.management.discover=false -Djava.net.preferIPv6Addresses=true -Dweblogic.management.discover=true -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -Dweblogic.ext.dirs=/app/oracle/product/ofm/patch_wls1035/profiles/default/sysext_manifest_classpath:/app/oracle/product/ofm/patch_ocp360/profiles/default/sysext_manifest_classpath weblogic.Server
Invalid initial heap size: -Xms=512m
Could not create the Java virtual machine.
Edited by: rrp on Oct 26, 2011 10:38 AM

I just noticed that in one place it is -Xms=512m and in the other it is -Xms512m. But the example I was given works - but apparently with JRocket, not sun. Does the format of this parameter vary between Hotspot and JRocket??? But the question on duplicate parameters remains.
Edited by: rrp on Oct 26, 2011 10:50 AM

Problem with start WLS

Peace!
I'm developing servlets that invoke ejb object under WLE.
I include in classpath for starting WLS 4 jar in udataobj of WLE.
When I try to start server there are problem and it doesn't start.
What do I include to run a client of EJB?
PS: I think that there are conflict problem between WLE classes and WLS
classes.
Thanks.

Giuseppe -
Are you using WLE 5.1? If no, I'd recommend you upgrade.
WLE 5.1 includes examples of how to access EJBs on the T-Engine from the
J-Engine, or WLS, and addresses some issues you may be encountering.
Will
Giuseppe Villanova wrote:
Peace!
I'm developing servlets that invoke ejb object under WLE.
I include in classpath for starting WLS 4 jar in udataobj of WLE.
When I try to start server there are problem and it doesn't start.
What do I include to run a client of EJB?
PS: I think that there are conflict problem between WLE classes and WLS
classes.
Thanks.

How to start workin with WebLogic 11g

Hi!.
can anyone out there guide me with how to start working with Weblogic..
i have made a jsp page but cant deploy it.. actually i know how to on Weblogic 8 but not on this version of the S/W...
Please give a detailed guiding about where to paste the jsp , servelets ant other pages in my folder because i cant find out where i have to paste the files to deploy them... and i cant find the weblogic builder...
Please..

Developing and deploying of web applications/ Enterprise applications remains the same as in wls 81.
Please refer the following doc for deployment : http://download.oracle.com/docs/cd/E12839_01/web.1111/e13702/understanding.htm#i1051084
For developing web application pls refer : http://download.oracle.com/docs/cd/E12839_01/web.1111/e13712/basics.htm#i153628
Hope this helps.

Problems starting WLS on XP - Unable to bind to port

Hi
I recently changed my development environment from W2000 to XP.
Apparently everything works as before.
However, when I start WLS again shortly after stopping it (either by console or
CTRL^C) I get the following error
<01-10-2003 14:48:40 CEST> <Emergency> <WebLogicServer> <BEA-000351> <Unable to
create a server socket on Channel Default for port: 28041. j
ava.net.BindException: Address in use Perhaps another process is using port 28041.>
<01-10-2003 14:48:40 CEST> <Emergency> <Security> <BEA-090085> <Server failed
to bind to the configured port. The port may already be used b
y another process.>
<01-10-2003 14:48:40 CEST> <Emergency> <WebLogicServer> <BEA-000342> <Unable to
initialize the server: Server failed to bind to the requeste
d port. See preceeding log message for details.>
This situation times out after an unpredictable delay (5-20 min) - and I can restart
my WLS.
Does anybody know how to resolve this problem.
Regards
Peter

Hi Werner,
SYSLOG is UDP port 514. Normally this means that some other program is running and using port 514.
Some of the TFTP servers are also SYSLOG servers and will "listen" on this port.
You can see if port 514 is listening with Fabric Manager not running.
To find out what is using port 514:
(a)     Open a command prompt window. From Start / Run enter: cmd
(b)     From the command prompt enter: netstat -ano
(c)      Note the PID (process identifier) associated with the ports you are concerned about. (Also note the Local Address, Foreign Address, Protocol and State.)
(d)     Then do ctrl-alt-del to bring up the Windows Task Manager.
(e)     In Windows Task Manager, select the Processes tab.
(f)      Look for the PID you noted when you did the netstat in step (c). Look to left to the image name and that tells you which process has that PID.
- If you dont see a PID column, click on View / Select Columns. Make sure PID is selected. Click OK.
- Make sure Show processes from all users is selected.
Now you can see what process is using port 514. FM would be listed as javaw.exe ( java exec without a console window ).
Best regards,
Jim

Don't know how to start db on linux

Hi, I need some tips on how to config tnsnames.ora, listener file. Don't know what the command to run Oracle Net Assistant to config the above files. Please help.
Are there any web site teach how to start up & shutdown db on linux.
I have installed oracel 9i on redhat 7.3.
Regards

Hi,
Please post your query at
Generic Linux
Regards,
Anupama

How to start weblogic as backend?

Hi,
I can telnet Unix server and start weblogic server. The problem is when
i logout. The weblogic is logout too. How to run weblogic as backend?
and won't logout even user logout. Any tips?
Thanks
Harden

[REPLY TO NEWSGROUP ------- This followup was posted to
weblogic.support.install and a copy was sent to the cited author.]
Actually you dont want to use nohup because it makes the process immune
to signals, like SIGQUIT which you want to be there for getting thread
dumps.
Cheers
Mbg
In article <[email protected]>, [email protected] says...
A good command to use in these situations is nohup.
You will also likely want to add start Weblogic.sh into your
//etc/rc.local
Thanks,
Michael
Mauricio Del Moral wrote:
Hi Harden!
I start up WLS in HPUX like any process in background of course with root
user and then switching WLS to diferent user to protect it, just put nohup
in the begining and the symbol & at the end of the comand to start WLS...and
thats all.
Please check the information about start WLS in port 80 for unix
machines........
Another way doing this I guess is start WLS and then start the
console....and then close the WLS telnet....and console remains WLS up.
Hope this helps!
Mauricio
==================================================
NewsGroup Rant
==================================================
Rant 1.
The less info you provide about your problem means
the less we can help you. Try to look at the
problem from an external perspective and provide
all the data necessary to put your problem in
perspective.

How nodemanager starts managed servers?

Hello All,
I'm facing strange issue with weblogic server. Currently i'm using WLS 8.1 SP 4 on solaris 9 server.
To start weblogic i have customize the script such that when server goes on reboot it will pick the startweblogic.sh script from /opt/bin and start the weblogic. Where as in startweblogic.sh i have mentioned -
NMLOG=/u001/wls8/bea/user_projects/prodDomain/logs/optbin/nodemanager.log; export WL8NMLOG
ADMINLOG=/u001/wls8/bea/user_projects/prodDomain/logs/optbin/adminserver.log; export WL8ADMINLOG
CLUSTERLOG=/u001/wls8/bea/user_projects/prodDomain/logs/optbin/cluster.log; export WL8CLUSTERLOG
cd /u001/wls8/bea/weblogic81/server/bin/
su weblogic -c "./startNodeManager.sh >> $NMLOG 2>&1" &
sleep 60
cd /u001/wls8/bea/user_projects/prodDomain/
su weblogic -c "./startadminserver.sh >> $ADMINLOG 2>&1" &
sleep 1200
cd /u001/wls8/bea/user_projects/prodDomain/
su weblogic -c "./startcluster.sh >> $CLUSTERLOG 2>&1" &
Though the script works as expected till adminserver is UP/Running, but script doesn't wait for 1200 secs. to start cluster. Somehow nodemanager starts the managed servers immediately after the adminserver is UP.
I have checked the nodemanager.properties file, there is nothing such mentioned. Also, from console i have unchecked the option of AutoStart for both managed servers.
Can anyone tell me how nodemanager starts the managed servers automatically??
Thanks,
HK

can you please tell me what is this .startCluster.sh script.
is it your custom script?
And the idea i have in my mind is that after
cd /u001/wls8/bea/weblogic81/server/bin/
su weblogic -c "./startNodeManager.sh >> $NMLOG 2>&1" &
sleep 60
cd /u001/wls8/bea/user_projects/prodDomain/
su weblogic -c "./startadminserver.sh >> $ADMINLOG 2>&1" &
sleep 1200
you can give the command to start the individual managed servers like:
cd /u001/wls8/bea/user_projects/prodDomain/
su weblogic -c "./startManagedWebLogic.sh <arguments> >> $CLUSTERLOG 2>&1" &
I think this way it will work....

How to start Enterprise Manager Server on Linux

I install successful oracle 9i on redhat 7.2 Linux ,but I don't know how to start Enterprise Manager Server on Linux ,please help me ,thanks!

oemctrl start oms
oemctrl status oms sysman/oem_temp
oemctrl stop oms sysman/oem_temp

Start wls using shortcut in a dos window

Hi,
I created a shortcut to startManagedWeblogic on desktop, when I need to start
wls, just click it. But whenever I stop the server, the window is gone, I would
like to let the window stay after the server stops, because sometime the wls crashed,
window is gone, nothing is in log file.
how can I modify the batch file to let the window stay? Thanks

You might try looking at launching the startManagedWeblogic script using the
windows "start" shell command. So you might create a new batch file with
this command in it
start %WEBLOGIC_HOME%\startManagedWeblogic.cmd
then launch that script via a shortcut
HTH,
Mike Jasnowski / BEA
"Jen" <[email protected]> wrote in message
news:3f9025e3$[email protected]..
>
Hi,
I created a shortcut to startManagedWeblogic on desktop, when I need tostart
wls, just click it. But whenever I stop the server, the window is gone, Iwould
like to let the window stay after the server stops, because sometime thewls crashed,
window is gone, nothing is in log file.
how can I modify the batch file to let the window stay? Thanks

How to start/ restart the service in visual admin of SAP WAS 6.4?

I have installed the sneak preview version of SAP NetWeaver WAS 6.4 for default Database MaxDB. While developing a simple application to manage simple database table citymaster with 2 columns in jsp I am getting error as
Exception e com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Path to object does not exist at : java.comp.
Looking at visual admin tool for WAS 6.4 all the entries are in color blue but the last entry for 'DATASOURCE' is in RED color where 'java.comp/env/JDBC/DATASOURCE' is the jndi reference created for default DataSource.
Can any one help me that why the last entry is in RED and it that say that some error has occured or that entry is not started then how to start that?
Please help....

Dear Daniel,
I have checked the Visual Administrator's JNDI Registry service entry in the ejbContexts node but there is no entry for the project which I have created.
It get deployed while I right click on the project's ear file and click on "Deploy on J2EE Engine". But same as before while checking in Browserthe site gives the same error...
503   Service Unavailable
Application cannot be started!
Details: com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Application bcone.com/EntityCMPAppln cannot be started, because it has hard reference to resource CONFIG_DB with type javax.sql.DataSource, but it is not active on the server.
     at com.sap.engine.services.deploy.server.ReferenceResolver.processUsageOfComponent(ReferenceResolver.java:508)
     at com.sap.engine.services.deploy.server.ReferenceResolver.beforeStartingApplication(ReferenceResolver.java:337)
     at com.sap.engine.services.deploy.server.application.StartTransaction.begin(StartTransaction.java:149)
     at com.sap.engine.services.deploy.server.application.StartTransaction.beginLocal(StartTransaction.java:285)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesLocal(ApplicationTransaction.java:355)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:120)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesLocalAndWait(ParallelAdapter.java:224)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationLocalAndWait(DeployServiceImpl.java:4170)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationsInitially(DeployServiceImpl.java:2390)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.clusterElementReady(DeployServiceImpl.java:2267)
     at com.sap.engine.services.deploy.server.ClusterServicesAdapter.containerStarted(ClusterServicesAdapter.java:41)
     at com.sap.engine.core.service630.container.ContainerEventListenerWrapper.processEvent(ContainerEventListenerWrapper.java:101)
     at com.sap.engine.core.service630.container.AdminContainerEventListenerWrapper.processEvent(AdminContainerEventListenerWrapper.java:19)
     at com.sap.engine.core.service630.container.ContainerEventListenerWrapper.run(ContainerEventListenerWrapper.java:80)
     at com.sap.engine.core.thread.impl4.SingleThread.execute(SingleThread.java:70)
     at com.sap.engine.core.thread.impl4.SingleThread.run(SingleThread.java:111)
Please help me, how to recover this error.
Rgds,
Vivek

How to start a application with a login window?

hi there
does anyone have any idea on how to start an application with a login window? a login window is the first frame or window to be displayed when an application starts running. and only correct login id and password have been entered the real application will start. any sample out there? thank you.

You can start a new thread by making a thread object and passing it an implementation of a runnable object. Runnable has just one method, public void run(), this is was gets executed in a second thread. perhaps the code you would use would look something like this.
<code>
// set up thread for login window
new Thread(new Runnable() {
public void run() {
// construct your login window here
// when you are done processing the
// password....
if(goodPassword) {
authorized = true; // a global variable
notifyAll(); // don't forget this
else {
System.exit(42);
}).start();
// control does not stop this code gets executed while
// the above thread is running.
// Set up main program here. This is done in the
// backround.
while(!authorized) {
synchronized(this)
{ wait(50); }
// now when the user logs in this frame pops
// up real quick.
myFrame.setVisible(true);
</code>
Hope you can figure it out.. good luck :)

How to Start Oracle Report in Unix?

hi
Does anyone know how to start oracle report in unix? I was
told to try this (r60desm) but that did not work. We are on 11i
and 6i. Please help
alpha

I don't have Forms/Reports 6i for UNIX. Have you tried typing "r60" and typing tab twice?

How to start WLS in RedHat 6.2

Similar Messages

Maybe you are looking for