How to stop a class which don't use thread is running

i have a class call my.class, in my application, i use a button "start button" to run this class by call: my.main(new String[0])
now I want to use another button call "stop button" to stop my.class.
If in my.class I don't use thread, have any way to stop it
please help me, it verry importand for me
Any help will hightly wellcomed

I take it that TimTheEnchanters reply to this question was scrubbed by your browser?
http://forum.java.sun.com/thread.jspa?threadID=579074&tstart=30

Similar Messages

I have my personal music (not purchased from Itunes) stored in two locations, on my PC and on an external HD. How can I find out which directory itunes uses to access this music? I am using Itunes version 11.4.0.18. Thanks

I have my personal music (not purchased from Itunes) stored in two locations, on my PC and on an external HD. How can I find out which directory itunes uses to access this music? I am using Itunes version 11.4.0.18. Thanks

Many thanks JEM24 for your help. Ive just spent the best part of six hundred pounds on a new Sony Rx100m2 compact camera, so I have no interest in the Ipods camera at all really. I doubt Ill be watching many videos on it as Im very lucky in that I have a good Android tablet. Its more as a stock music player that Ill be buying the Ipod for, if indeed I do end up buying one. I dont like the idea of paying the exorbitant amount added for more memory space that Apple along with most other companies charge. In fact I read an article on this very subject just yesterday in the tech section of Flipboard. It stated in the article that in the case of the Iphone the actual cost of each additional gigabyte of storage to Apple et al is something in the order of 60p.. This is certainly not reflected in the price us the customer has to pay at the till.. Its for this reason primarily that Apple in particular, because their products do not allow adding expandable memory of your own in the form of cheap to buy cards, that nobody in their right mind buys the 64gig etc Iphones..I am aware that we are discussing my potential purchase of an Ipod Touch here but you see my point. Many thanks again though for helping me.

How do I find out which instruments are used by software instrument loops?

This isn't so much a problem, it's just something that's been bugging me - how do I find out which instruments are used by the software instrument loops?
Usually clicking on a track will bring up the instrument name in the track info pane, but if I do this after importing a software instrument loop into my song it doesn't show anything. Any ideas?
PS I have used the search function so I apologise in advance if there's an obvious answer.

in track info, under details, the instrument being used is displayed in the generator popUp menu

How to deal with the mouse events when the thread is running

Hi everybody,
I have a problem with my program.
Now I want to present a picture for some time in the Canvas,then automatically clear the screen, but when the user press the mousebutton or keybutton, I want to stop the thread and clear the screen.
How can I receive the mouse event when the thread is running?
Thanks,

I use my code in a GUI applet.
I try to use the code tag, it's the first time.
               Image im=sd.getStimulus(obj);
               if(pos==null){
                    g.drawImage(im, (w-im.getWidth(null))/2,(h-im.getHeight(null))/2,null);
               }else{
                    g.drawImage(im, pos.x,pos.y,pos.w,pos.h,null);
               try{
                    sleep(showtime);
//                    Thread.sleep(showtime);
               }catch(InterruptedException e){}
               if(pos==null){
                    g.clearRect((w-im.getWidth(null))/2,(h-im.getHeight(null))/2,im.getWidth(null),im.getHeight(null));
               }else{
                    g.clearRect(pos.x,pos.y, pos.w, pos.h);
               }

How to load a class , which isn't in the classpath environment variable.

Hi, you folks.
I have one problem. I want to load a class, which isn't in the classpath
environment variable and I don't want to put into classpath. which method
JVM can use to load it?
Waitting for your sage advice.
Regareds
Hunter.Xiao

You will have to write your own ClassLoader, or use something like URLClassLoader (I've never used this myself, but I've seen it mentioned elsewhere in this forum). Look here.

How to stop the rotation i don't want to happenin relationship in mountain lion

how do i stop the rotation i don't want to happening relationship in mountain lion. Everytime I try and work now, the page swipe deal happens, I hate that on my Mac, and then my page all the sudden rotates and I can't figure out how to stop that from happeneing and even make it go back. Happens in photoshop, indesign, etc. help.

nevermind. I found the answer in another place. I have now disabled the gestures. I get gestures for ipads and ipods, but not my regular work mac. Irritating. But got it now and my documnet is back to normal.

HT204053 how can i find out which id i used to purchase an app?

i can't update iphoto, imovie and garageband cause it says "sign in to the account you used to purchase it" but those were pre-installed when i bought my iMac and i don't have a second id. what can i do or how can i find out which is the right account for these apps?
thanks in advance

I also have a linked problem like that. I bought various apps under different ids and now I don't know how to sign in - where to sign in under the emails that I bought them on so i can't update my Pages app.
Can anyone help us please?
Is there a way to put them altogether now under my apple id with icloud?
Thanks

How to create a material which can be used in T-Codes VAO1 & MB1C create

Hello Experts,
How can I create a material which can be used to create a sales order and can be used to create inventory using VAO1 and MB1C T-Codes respectively.
What are the configurations that I need to take care of, while creating it?
I need to create a material which can be used in the whole sales cycle(sales order,goods issue,billing and etc).
Please Help,
Thanks in Advance,
Suma

Hi
Thanks for your fast replies.. I have created a new material and was able to create inventory thru MB1C. But I was not able to generate a goods delivery(VL01N) and billing document(VF01) for the sales order.
Error: No schedule lines due for delivery up to the selected date
Message no. VL248
Diagnosis
There are no schedule lines due for the given order item up to the date chosen.
System Response
The system does not create a delivery item for this order item.
Procedure
Check whether the order item to be delivered contains confirmed schedule lines.
If this is the case, set the selection date further into the future if you still want to create a delivery for this item.
Please suggest,
Tanks,
Suma
Edited by: Suma B on Sep 23, 2008 3:55 PM

How to stop reuse asset code once its use in po

Dear All,
how to stop reuse of asset code once its use in PO or PR.
Thanks & Regards,
Mukesh Chejara
SAP

Dear All,
Awaiting your valuable reply.
Thanks & Regards,
Mukesh Chejara
SAP

Interface/class which can be used for obtaining exchange rates of currency

Is there any interface or class in the java package which can be used for obtaining current exchange rates of currencies ?

Yes. The people at Sun change the static fields every day to reflect the current prices on the world currency markets at GMT 12:00. Then every day all the java programmers around the world reinstall a new JDK that contains the updated class. The class is called:
EuroDollarDollarEuroDollarYenYenDollarYenEuroEuroYenRubleDollarDollarRuble
To access the Euro-Dollar exchange rate, you write:
EuroDollarDollarEuroDollarYenYenDollarYenEuroEuroYenRubleDollarDollarRuble.EURODOLLAR

Mainstage - how to "hold" a note - which CC is used?

Hi all,
I'd like to be able to hold a note(s) indefinitely using a momentary switch on my midi footcontroller. I tried using CC 64 but that only sustains and drops off as you know. I'd like a complete hold (same velocity, volume, etc) which CC is used for Hold if any? Or is it dependent on the software instrument?
Thanks!
Jas

Thanks for responding...yeah, just to give you a bit more background I'm using a MIDI guitar going into an Axon pitch to MIDI converter, Axon->RME UC, then the MIDI messages (note, etc) come in to MS via USB from the UC.
I then use a software instrument (synth, etc) and I want to be able to hold a note(s) when playing in order to then play over using another instrument. My plan is to use my Gordius MIDI footcontroller to send a "hold" CC via a momentary switch into MS to trigger the hold then let up when done but I don't know what the CC is to do that or if that functionality even exists (but can't see why it wouldn't).
There may be another way I'm not thinking about.
Thanks,
J.

How to create a timer function by only using Threads

I have used Timer & Timer Task but since they r only available for JDK1.3 and i need this to work on 1.2 also can any one tell me if i can create the same function using Threads.

i had to do the same (heres roughly what i used...)
interface TimerTask{
public void timeout();
class Timer extends Thread{
private int delay;
private TimerTask user;
Timer(int delay,TimerTask user){
this.delay=delay;
this.user=user;
public void run(){
try{
Thread.sleep(delay); //*
catch(InteruptedException IE){};
user.timeout(); //*
}as you can see, very rough, but the basics
refinements could be to add some flags to alter its behaviour..
like, a loop if you want recuring events
the commented lines might be rearranged if you dont want it to generate an event just because there is some shut down going on
as it is an instance of a class could only use 1 Timer, to change this TimerTask.timeout() could be changed to TimerTask.timeout(Timer) so you could determine which Timer had triggered

How to import a class, which is not in a package?

Hi all,
I have the following problem:
A class A is not in a package. In another class B, which is in a package (let's say package X) I want to use the class A. Without importing the class A, I get the error "Cannot resolve symbol".
Using the import statement import A; gives the error ". expected".
How can I import that class?
Best wishes to all ...
Heiko

> I have the following problem:
A class A is not in a package. In another class B,
which is in a package (let's say package X) I want to
use the class A. Without importing the class A, I get
the error "Cannot resolve symbol".
I think not putting a class in a package is a bad practice. Avoid that.

How to stop the job which is running infinite time......

Hi ,
I created one procedure with the below code. Using dbms_scheduler i created one job and called that program. That job is in sleep mode for long time. How can i stop that job.
create or replace procedure bpc_test_batch
is
begin
dbms_lock(30000000)
end;
Regards,
Thiru

Have you tried this already?
exec dbms_scheduler.stop_job('Your_Job_Name',true);

How to stop the TR which has run a long time

Hi,
I released a TR, but the system import it a long time. I think maybe have a problem with it.
I want to stop the import job of the TR. How can I do for that?
jk

hi,
Q: How to kill a long running job in SAP.
Answer
You can 'kill' your own long running jobs by doing the following.
Open a new SAP session.
In the new session, from the SAP R/3 screen, follow the menu path: Tools>>Administration
(new screen) Monitoring >>System monitoring>>User overview
Fastpath: /nsm04
Result: the "Overview of Users" screen appears. This is a list of the jobs currently running.
Find your username in the list and click on it
Click on the Sessions button .
Result: the Overview of Sessions screen appears.
Click on the End session button .
hi, ask your BASIS people for killing the job..
regards
vijay

How to stop a class which don't use thread is running

Similar Messages

Maybe you are looking for