How to stop an email from being sent after I hit send?

How can I immediately stop an email from being sent after clicking "send"?
I can't seem to find any info on this. I am assuming that it is impossible. Correct?

When sending the emails with larger attachments that take a little time to actually upload and get out, you can open the activity viewer by pressing command-0 (or is it command-o?--)--it may also be under the window menu at the top--I'm not at my Mac right now to check. The activity viewer has a stop button on it. After you stop it, you should be able to either delete the email from the outgoing mail folder or drag that email to another folder, such as the drafts folder. I've done this a few times without a problem.

Similar Messages

  • How can i stop an email from being sent?  i cannot find an outbox in outlook

    How can I stop an email from being sent.  I cannot find an outbox in Outlook

    Outlook is a Microsoft product, I'd suggest posting on the Office for Mac Product Forums.

  • TS3899 I keep getting batch loads of old emails uploaded to my IS 4 phone in increments of 100, how do I stop these emails from being sent to my iphone? thanks Patrick

    I keep getting batch loads of old emails uploaded to my IS 4 phone in increments of 100, how do i stop these emails from being sent to my iphone? Thanks Patrick

    SOLUTION FOR UNREAD COMCAST MAIL...so far, so good
    I went to Comcast.net and created a folder titled "Archive 10-2-13" and then went back into my inbox on the site and clicked the 'select all' box at the top of the email page. I could only see what would fit on my screen, but figured out that if I scrolled ALL the way to the very end (which was a l-o-n-g time for 30,000 emails) and then clicked "move to' at the top of the page and chose "Archive 10-2-13"..all my mail went there and no longer comes up as unread on my iPhone.
    I don't know if this will work for other POP accounts (Hotmail, etc.) but HALLELUJAH! I have ZERO unread email messages showing!

  • How do I prevent my emails from being sent without my hitting the send key. Many of my emails are just "taking off" and sending while I am in the middle of typing. If this is a keyboard shortcut, I must disable it, so how do I do that

    How can I stop emails from being sent without my hitting the "send" key.

    Firefox doesn't do email, it's a web browser.
    If you are using Firefox to access your mail, you are using "web-mail". You need to seek support from your service provider or a forum for that service.
    If your problem is with Mozilla Thunderbird, see this forum for support.
    [http://www.mozillamessaging.com/en-US/support/] <br />
    or this one <br />
    [http://forums.mozillazine.org/viewforum.php?f=39]

  • Can I stop email from being sent?

    I have a number of email accounts configured in outlook 2010.
    I want to prevent email from being sent via one of the accounts.
    CAN I do this?
    If so How?
    I have tried to change the SMTP address to be invalid.
    It does not send, and does not give me an error.
    When I close outlook it tells me emails have not been sent. I have no idea where these emails r.
    When I restart it, it resets the smtp address and sends the email.
    ruggb

    thx for the reply
    The problem I am trying to work around is ppl using outlook try to send/reply/fwd emails using those old addresses. Outlook must be configured to rcv mail from clients using those addresses. So if the old email address is set as FROM I want to stop it from
    being sent.
    if i set the smtp address to an invalid the test never completes and I can never get to the end of that wizard.
    If I go back and look at it it is still the invalid address after I cancel the wizard.
    If i try to send mail it appears to do it after a long pause and i can't find the email anyplace -but it is not sent.
    If i shut down and restart outlook it is back to the valid address and the mail gets sent.
    I have it set only rcv, not send, that address in the group but that doesn't work.
    ruggb

  • How do I keep emails from being deleted on my iPhone 6? Emails get deleted from phone when I startup desktop computer and they are downloaded from sever. Is POP3 no longer supported on IOS 8.1?

    How do I keep emails from being deleted on my iPhone 6? Emails get deleted from phone when I startup desktop computer and they are downloaded from sever. Is POP3 no longer supported on IOS 8.1?

    Have you seen this?
    Using a POP account with more than one device - Apple Support
    A better solution is if your email provider uses IMAP. IMAP sync email folders between multiple devices. Meaning any device will receive the email, all sent email can be seen on the devices. If you delete email from one device the email is deleted from all the other devices. Check with your email provider to see if they offer IMAP services.
    If they do not your choices are to 1) configure email on the PC to keep Mail on the mail server or 2) change email providers to something like Gmail or Outlook.com (as examples). FWIW I use Cox IMAP email and fully sync email between a Win 8.1 Update 1 laptop, a Win 7 desktop, an iPad 4, an iPhone 4 and an iPhone 5S.

  • How to stop the Dialog from being dragged

    I was hoping that someone could tell me when calling a Dialog from Jframe, a how to stop the Dialog from being dragged
    while a dialog is showing.
    When it is visible I can still click and drag the Dialog
    I want to set it so you can not drag it until the dialog has be closed.

    If you don't have access to the parent frame, a "hack" that usually works:
    Frame frame = Frame.getFrames()[0];
    if (null != frame && frame instanceof JFrame){
    JFrame jf = (JFrame)frame;
    JDialog jd = new JDialog(jf, "title");
    ... code here ...
    As each JFrame (or Frame) is opened, its stored in the array of Frames that you can get. Same thing with Dialog.getDialogs(). Almost always, at least so far for me I've never had this problem, the [0] index is the main window opened, or the parent/top frame. I'd put the check in there to be safe and make sure its a JFrame and usually you'll only have the one JFrame.

  • How to stop volume icon from being displayed randomly

    How to stop volume icon from being displayed randomly

    Thanks for the quick response.
    I have a number of slides which act as a training module. The quiz follows this. All the answers to the quiz are in the module slides. I'd like the user to be able to see which questions they're failing on, but not be shown the answers, as, if they are failing the quiz, the whole module needs to be reviewed and the test retaken.
    If this isn't possible, I'll probably just remove the review option, thereby meaning my retake button can stay, and the user can just go back and re-read the module slides to learn the answers.
    Thanks

  • How to stop an idoc from being processed further

    Hi Experts,
    I have a requirement where i have to stop the idoc from being processed in an user exit.
    I have to stop the idoc and give a suitable status message over there.
    It would be highly helpful if anybody tells me how to stop the idoc abruptly and giv the status messsage.
    Thanks in advance.
    Praveen.

    Hi,
    Check the below link
    https://forums.sdn.sap.com/click.jspa?searchID=11810720&messageID=3032674
    You need to find aproper EXIT.
    The avaliable options for you in the exit is
    IDOC_DATA
    Now if i pick the segment having shiped qty from the data record and check the same with the delivery qty your objective is half done.
    When the condition fails you need to update the IDOC with Error 51 saying that this is not possible .
    for that you need to bring your logic as
    LOOP AT IDOC_CONTROL.
    PERFORM LOGIC...
    ENDLOOP.
    FOR LOGIC .
    All the criteria and then update the status of the IDOC then error is generated and updated to the IDOc.
    PERFORM updatestatusidoc.
    endform logic.
    like this in
    form updatestatusidoc.
    IF subrc = 0 .
    t_idoc_status-docnum = f_idoc_contrl-docnum.
    t_idoc_status-status = c_idoc_status_ok.
    t_idoc_status-msgty = 'S'. -
    >denotes success
    t_idoc_status-msgid = 'ZXXX'.
    t_idoc_status-msgno = '000'. "
    t_idoc_status-msgv1 = itab-field.
    APPEND t_idoc_status.
    ELSEIF subrc = 1.
    t_idoc_status-docnum = f_idoc_contrl-docnum.
    t_idoc_status-status = c_idoc_status_error.
    t_idoc_status-msgty = 'E'. "denotes --->error
    t_idoc_status-msgid = 'ZXXX'.
    t_idoc_status-msgno = '001'. "
    t_idoc_status-msgv1 = itab-field.
    APPEND t_idoc_status.
    endif.
    endform.
    this has to be done to make the idoc to trigger error mode.
    Regards,
    Raj.

  • Suddenly I am unable to send emails, which are being blocked due to "suspicious activity." Yahoo help notes it is probably my ISP that is preventing my emails from being sent. How can I unblock this?

    On Friday afternoon, I attempted to reply to emails in my Yahoo Inbox, but I received a pop-up message preventing me from sending the emails. It said that my emails cannot be sent due to suspected "suspicious activity" on my email account and cannot send it in order to protect me and those I am attempting to send the messages to. I looked up Yahoo Help and the online suggestion was that my ISP might be blocking the email and I might have to change my ISP address. My antivirus software carrier's server went down briefly a couple of weeks ago and I could not upload the updates until they were up and running again. I had some suspicious emails generated from my account during that time, without my knowledge. I changed my password immediately and updated my Email Protection through my antivirus software program. But now I can't send emails. Any suggestions? Thank you!

    From the Mail menu bar, select
    Window ▹ Connection Doctor
    Click the Show Detail button. A drawer opens. Click Check Again and post the text that appears. Anonymize any personal information before posting.

  • How to stop receiveing emails from email account?

    Hi have a new pearl 8110.  I have it thru AT&T.  I have it configured thru BES.  I receive work emails thru the BES.  I was experimenting with the personal email and set it up to receive emails from my personal earthlink email account.  I decided I do not like that set up since I am unable to set the BB up so that work and personal emails go to separate folders (the personal ones will go to a separate folder and the general email folder and the work emails go to the general folder only).
    At any rate, I want to delete the earthlink email account from the BB.  I deleted it from the servicebook, but I still am getting emails?
    Any idea how to remedy this so that the earthlink emails stop showing up?
    Thanks.
    Solved!
    Go to Solution.

    Go to E-mail Settings icon on your home screen. Login using the user name and password (if passoword used while setting initial setup).  Go to Email Accounts under services and hit the delete button under the email ID that you want to delete.
    tanzim                                                                                  
    If your query is resolved then please click on “Accept as Solution”
    Click on the LIKE on the bottom right if the post deserves credit

  • Please tell me in plain english how to stop the email from apple

    How do I stop all these email messages from appearing in my mailbox???

    See this user tip: Stopping emails from ASC
    tt2

  • How to stop control characters from being tokenized?

    In Oracle 11.2.0.3
    I have documents which has embeded Arabic and so there is a control character \u202b to indicate right-to-left string. How do I stop these kinds of control characters from being tokenized. Doing a search with CONTAINS(search_string,' \u202b')>0 finds documents. Do I just add the '\u202b' as a stopword?

    What lexer are you using, Amin?
    I assume from what you say that the characters are getting indexed as whole tokens?  If so, adding them as stopwords should work, but I'm surprised they're getting indexed at all - sounds like a fault in the "alphanumeric indentification" code to me.
    I'm going to take a guess this is the World Lexer.  Am I right?

  • How to stop table row from being split onto two pages

    How do I stop a row of output from being split between two
    pages. When the CFDocument loads, sometimes, the last row on a page
    "spills" over onto the next. I'd like to figure out who to prevent
    these "orphans" from happening, and force the row onto one page or
    the other.
    Here's my code for the doc... I have a sp that querys the sql
    db. Using CFDocument - CF Version 7.02

    If you know roughly how many lines of output will fit on a
    page (you can test to find out), then you can count result lines
    (you should be able to use RecordCount and do some math) and cfif
    against your counter and force a page break beforehand if the next
    table will be too much to fit on the page. Then just reset the
    counter after you page break.

  • How to stop Deleting email from work exchange when deleting of iphone

    I have an iPad and iPhone 5 and would like to be able to delete work related exchange email from either device without deleting the email from my work station. My previous phone [Blackberry] allowed me to chose to delete only on the phone or both. Is this possible on either Apple device?

    You don't. That's the way Exchange Active Sync works. It fully synchronizes the two.
    The Blackberry allowed you to do that because all of your Exchange e-mail was actually going through another server before it ever got to your phone. Blackberry uses a middleman server (for lack of a better term) to handle communication. Your BB was never actually communicating directly with your Exchange server.

Maybe you are looking for