How to stop Event Handlers themselves throwing events in ssis

Hi,
We have SSIS package, where custom logging is enabled by making some entries to a table and in "Event Handler" Section. This logging is
at the package level(i.e., not at the task level)
Below points describe in brief about the event handling being handled in the package
OnPrexecute: Make an entry to the logging  table with packagelogid, sourcename, sourceid and startdatetime
NOTE: PackagelogID is an auto-generated number for each execution of the package
OnPostExecute: Update the enddatetime, to the record
entry made above(i.e, OnPreExecute), for specific packagelogid, sourceid(PackageLogID and SourceID are passed as a parameters to have this update).
What I have observed is that, after the execution of a particular task in Control Flow, there will be 2 entries in the Logging table,
One entry for the control flow task
And another entry specific to OnPreExecute eventhandler
itself:
i.e, For each execution of a control flow task, below entries are made to logging table
 One for the main task in control flow
Another for OnPreExecute task itself.
OnPostExecute also runs after the completion of OnPreExecute to update the enddatetime for this OnPreExecute Task entry in the logging table
Now, I want to avoide last 2 execution. I don't want an entry in the Logging table for the execution of Event Handler itself.
Is it possible to avoide that 
Please let me know if the above issue explained is confusing or if you need any further information.
Raksha

Hi Raksha,
You mixed in several unrelated things. 1st seems you have a problem with locking and I do not see how the Event handler is related.
Can you simplify your question?
Obviously, running inserts / updates in parallel with WITH(ROWLOCK) makes little sense. Why?
Perhaps you need not to run in parallel, this is it. EventHandlers can be disabled at the package level, task or even container
Arthur My Blog

Similar Messages

  • How to stop events that span midnight from displaying on 2 days

    Somewhere around SnowLepoard iCal's default behavior changed. It used to be that If an event spanned midnight (e.g. 7p-7a) then in the Month view it would only show up on the day the event started.
    Now in Lion, it produces a colored bar that spans both days with 'ends 7am' on the right hand side of the bar in the second day. In Month view this is annoying and clutters the display when you have several consecutive events that span midnight e.g. three 7p-7a events in a row.
    How can I get the old behavior back without editing events as many of them are from calendar subscriptions?

    I work the same kind of shift, one that spans all night. Mine show with the start time on the correct day and another one for the end time on the next day.

  • How to stop events from firing

    helo..
    is there a way to stop an event from firing.. or making an effect event if it was raised..
    for example in my application.. i have a JList which has a ListSelectionListener and a PopupListener... when i right-click.. the populistener fires.. and also my selection (say i made a select-all-items) gets changed.

    Remove one if the listeners??
    /Kaj

  • How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share form

    How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
    To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips.  This operation has been stalled by the spinning ball. Shut down restart has not helped.
    The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
    What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

    How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
    To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips.  This operation has been stalled by the spinning ball. Shut down restart has not helped.
    The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
    What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

  • How to stop timeout event

    hi,
    Inside a while loop i've placed one timeoout event with other button click event, but after stopping the while loop the time out event didn't stop.. how to stop that event,
    Suggestions pls??
    Thanks and Regards
    Jagan

    2716jag wrote:
    im having only one event structure.. see within a while loop im having the event structure. im having three cases, one is time out event having the time out of value '0'. that is it never wait for other to event occur. if i click other other event after running that time out event is running. in one case im stoping the while loop with a boolean. but after giving the true value to the while loop the time out event is continously running. tell me how an i stop the time out event??
    You should really show us your code! We cannot troubleshoot vague descriptions. Attach your VI or at least attach a picture of the code.
    Have you tried running in execution highlighting mode?
    Some guesses:
    Are you possibly running the VI in "continuous run" mode? That would restart the code after it finishes. 
    Is your stop button outside the loop, but wired to the stop terminal across the loop boundary?
    Message Edited by altenbach on 06-15-2008 01:48 AM
    LabVIEW Champion . Do more with less code and in less time .

  • How to start/stop Event Mgr. and RFID information server?

    I take over our form RFID admin (who quit) position.
    I cannot find any document which tells me How to start/stop Event Mgr. and RFID information server.
    Even the "Sun Java System RFID Software 3.0 Administration Guide" does not have this piece of info.
    Would you please help? Points guaranteed. Thanks!

    Ashley you are still not clear to me.
    Please mention what applications are these??
    Is it SAP Event Manager??
    What is the RFID Information server??
    Is it SAP based, or some other vendor??
    How is the integration done?
    Thanks

  • How to stop Timer event inside movie clip that does not exist?

    Hello. I am using Adobe Flash CS6.
    As this topic title says. how to stop Timer event nside movieclip that does not exist?
    I mean my fla stracture is  there are 2 frames on main timeline, and I put mcA on frame 2.
    And I put a button on root that does
    if(currentFrame ==1)
    gotoAndStop(2);
    else if (currentFrame ==2)
    gotoAndStop(1);
    And mcA has AS inside and it is
    var T_Timer:Timer = new Timer(1000,0)
    T_Timer.addEventListener(TimerEvent.TIMER, test)
    function test(e:TimerEvent):void{
    trace("Timer active")
    T_Timer.start();
    I need to stop T_TImer from root on frame 1, not on frame 2.
    but, "mcA.T_Timer.stop();" won't work.
    I get TypeError: Error #1010 error.
    I don't know how to stop this timer event. I have to stop it from root, and I can't use EVENT_REMOVED in this case.

    If the object doesn't exist you cannot do anything relative to targeting it.  Maybe you should move the timer to the main timeline where you can access it any time.

  • How to configure Event Correlation

    Hi,
    I have a requirement where in a Service stop event has to be monitored for the Stop event. If the start events doesn't get logged in the System log in 3 min an alert has to be triggered.
    Please advise how do i configure this alert.
    Jesty

    You may use Create a Correlated Windows Event Unit Monitor, for deail, pls. refer to
    http://technet.microsoft.com/en-us/library/hh457587.aspx
    http://contoso.se/blog/?p=214
    Roger

  • Why and how to use events in abap objects

    Dear all,
      Please explain me why and how to use events in abap objects with real time example
    regards
    pankaj giri

    Hi Pankaj,
    I will try to explain why to use events... How to use is a different topic.. which others have already answered...
    This is same from your prev. post...
    Events :
    Technically speaking :
    " Events are notifications an object receives from, or transmits to, other objects or applications. Events allow objects to perform actions whenever a specific occurrence takes place. Microsoft Windows is an event-driven operating system, events can come from other objects, applications, or user input such as mouse clicks or key presses. "
    Lets say you have an ALV - An editable one ...
    Lats say - Once you press some button  you want some kind of validation to be done.
    How to do this ?
    Raise an Event - Which is handled by a method and write the validation code.
    Now you might argue, that I can do it in this way : Capture the function code - and call the validate method.
    Yes, in this case it can be done.. But lets say .. you change a field in the ALV and you want the validation to be done as soon as he is done with typing.
    Where is the function code here ? No function code... But there is an event here - The data changed event.
    So you can raise a data changed event that can be handled and will do the validation.
    It is not user friendly that you ask the user to press a button (to get the function code) for validation each time he enters a data.
    The events can be raised by a system, or by a program also. So in this case the data changed event is raised by a system that you can handle.
    Also, Lets say on a particular action you want some code to trigger. (You can take the same example of validation code). In this case the code to trigger is in a separate class. The object of which is not available here at this moment. (This case happens very frequently).
    Advantage with events : Event handlers can be in a separate class also.
    e.g : In the middle of some business logic .. you encounter a error. You want to send this information to the UI (to user - in form of a pop up) and then continue with some processing.
    In many cases - A direct method call to trigger the pop up is not done. Because (in ideal cases) the engine must not interact with UI directly - Because the UI could be some other application - like a windows UI but the error comes from some SAP program.
    So - A event is raised from the engine that is handled in the UI and a pop up is triggered.
    Here -- I would have different classes (lets say for different Operating Systems). And all these classes must register to the event ERROR raised in application.
    And these different classes for different Operation systems will have different code to raise a pop-up.
    Now you can imagine : If you coded a pop-up for Windows (in your application logic) .. it will not work for Mac or Linux. But of you raise a event.. that is handled separately by a different UI classes for Win, Linux or Mac  they will catch this event and process accordingly.
    May be I complicated this explanation .... but I couldn't think of a simpler and concrete example.
    Cheers.
    Varun.

  • Addon stop event?

    My addon won't close when a user presses the stop button, I suspect because of event handlers still listening.
    I need to know when the user clicks stop so I can do a clean up of the event listeners and allow it to close. It doesn't appear to fire a shutdown event, and I can't find anything that looks like a "stop" event
    Can anyone tell me, is there an event I can listen to to catch when a user stops an addon from addon manager?

    I'm using this :
        Private Sub SBO_Application_AppEvent(ByVal EventType As SAPbouiCOM.BoAppEventTypes) Handles SBO_Application.AppEvent
            Try
                Select Case EventType
                    Case BoAppEventTypes.aet_ShutDown
                        SAP_APP.SetMessage("Billing Customization Add-on is Shutting down..", BoStatusBarMessageType.smt_Success)
                        System.Windows.Forms.Application.Exit()
                        Return
                    Case BoAppEventTypes.aet_CompanyChanged
                        SAP_APP.SetMessage("Your Company has been changed.", BoStatusBarMessageType.smt_Success)
                        System.Windows.Forms.Application.Exit()
                        Return
                    Case BoAppEventTypes.aet_LanguageChanged
                        SAP_APP.SetMessage("Your system Language has been changed.", BoStatusBarMessageType.smt_Success)
                        Return
                    Case BoAppEventTypes.aet_ShutDown
                        SAP_APP.SetMessage("Billing Customization Add-on is Shutting down..", BoStatusBarMessageType.smt_Success)
                        System.Windows.Forms.Application.Exit()
                        Return
                End Select
            Catch ex As Exception
                SAP_APP.SetMessage(ex)
            End Try
        End Sub

  • Google mail as iCloud account. How receive invitation event directly on my iCould calendar?

    Hi,
    My iCloud ID is a google mail.
    I would have only my iCloud account on my devices (iPhone, iPad and Mac) and not also the google account.
    How to receive event invitations on my iCloud calendar directly without add a google account on my devices?
    Is it possible syncronise on the cloud both?
    Regards,
    fabio

    Welcome to the Apple Community.
    Delete your mail account from Mail preferences and set it up again using the Mail Server Information.
    Some users have apparently encountered issues using this information in pre-Lion set ups (I haven't), Roger Wilmut has kindly provided instructions for those who find themselves with this problem.
    Entering iCloud email settings manually in Snow Leopard or Leopard

  • Stop Event Bubbling w/ VidPlayer Component

    Hello
    I am having trouble with event bubbling when using the flash video player
    I've tried several methods to stop the player,before submitting here - but nothing I've tried seems to work
    The example is posted at http://64.50.167.136/~natures/NaturesReflections.html
    The scenraio is:
    The site loads great - the buttons function correctly
    When the fourth button is click - it loads a frame with an embeded FLV player
    (the default vid player Flash uses when importing video into the swf)
    When the fourth button is click (Cheetah Coloring System)
    The video starts to play
    When any other button is clicked
    The video continues to play
    The embeded vid clip is named movie1
    and i've tried using move1.stop();
    but that stops the entire swf
    Any suggestions on how to stop the movie - when another button is clicked?
    Thank you for your time and attention
    COde used for the buttons::::
    btn1_mc.addEventListener(MouseEvent.MOUSE_DOWN, bhp1DownHandler);
    function bhp1DownHandler(event:MouseEvent):void {
    gotoAndStop(15);
    btn2_mc.addEventListener(MouseEvent.MOUSE_DOWN, bhp2DownHandler);
    function bhp2DownHandler(event:MouseEvent):void {
    gotoAndStop(16);
    btn3_mc.addEventListener(MouseEvent.MOUSE_DOWN, bhp3DownHandler);
    function bhp3DownHandler(event:MouseEvent):void {
    gotoAndStop(17);
    btn4_mc.addEventListener(MouseEvent.MOUSE_DOWN, bhp4DownHandler);
    function bhp4DownHandler(event:MouseEvent):void {
    gotoAndStop(18);

    don't embed your flv in your swf.  add an flvplayback component to your frame where you want the flv to be displayed, assign it an instance name (say flv) and use:
    flv.source="pathtoyourvideo.flv";
    and, if publishing for fp 10, use:
    flv.unloadAndStop();
    when about to exist that frame.
    if publishing for fp9, use:
    flv.stop();

  • Report generation toolkit and signal express user step : problem of closing reference in "Stop" event

    Hi all,
    I'm trying to make a package of Vis to easily make Excel reports with Signal Express. I'm working on LabVIEW 8.2.1.
    I'm using the report generation toolkit, so I build a .llb from my project which contains all the hierarchy of my steps, but also the hierarchy of dynamic VIs called.
    I have made some steps, like "Open Workbook", "Write Data", etc.
    My steps run well, excepts one step : "Close Workbook".
    If my "Close Workbook" step is firing on "Run" Signal Express event, I have no error, so my reference is properly closed.
    But if my "Close Workbook" step is firing on "Stop" Signal Express event, I have an error "1", from "Generate Report Objectrepository.vi".
    I feel that I'm trying to use a reference which has been killed in the "Stop" step...
    I would like to know what exactly do Signal Express on "Stop" event and why my close function does'nt run well.
    Thanks,
    Callahan

    Hi Callahan,
    SignalExpress (SE for short) does the following on the Stop event:
    1. Takes the list of parameters that SE found on your VI's connector pane, and sets the values that the user set from the "Run LabVIEW VI" configuration page, if any.
    2. Then tells the VI that SE is running the Stop event by setting the Enum found on your VI's front panel. This in turn should produce some boolean values telling your VI to execute the Stop case.
    3. The VI is then run, with those values and states.
    4. SE checks to see if any errors where returned.
    5. Since this is the Stop event, SE releases the reference to the VI which it possesses.
    Questions for you would be, is the reference to your Workbook linked to a control on your connector pane, or held in a uninitialized Shift Register. If it's held in a Shift Register, SE would not be aware of it, and would not be able to affect that reference.
    Hope that helps. Feel free to post your LLB if it doesn't.
    Phil

  • Problem with checkbox and Event.stop(event)

    Hello,
    I cannot change the checkbox in a row, if the Event.stop(event) is fired on checkbox. My aim is, that the event OnRowClick is stoped, if I change the checkbox in the row.
    <rich:extendedDataTable id="requestTable" value="#{requestListHandler.normalisedRawRequestList}" var="req"
                             rows="#{requestListHandler.limitRows}" selectionMode="single">
                             <a4j:support event="onRowClick" action="#{requestListHandler.viewRequest}">
                                  <f:setPropertyActionListener value="#{req}"
                                       target="#{requestHandler.selectedRequest}" />
                                  </a4j:support>
                            <rich:column>
                                       <h:outputText value="#{req.offerListSize}">
                                            <f:convertNumber type="number" />
                                       </h:outputText>
                         </rich:column>
                             <rich:column id="checkBoxColumns">
                                       <h:selectBooleanCheckbox onclick="Event.stop(event);"
                                            value="#{req.firstInterpreterTimeChecked}"/>
                         </rich:column>
    </rich:extendedDataTable>I know I am using richfaces, but I have problem with sun-ri component <h:selectBooleanCheckbox..../>.
    Have you any idea?
    Manu
    Edited by: Argonist on Jun 16, 2009 8:27 AM
    Edited by: Argonist on Jun 16, 2009 12:25 PM

    I had the same problem. I read you post and was so disappointed that no one had answered you. But I have a good news for you :) My team leader managed to solve this awkward problem.Add to h:selectBooleanCheckbox style="z-index: 20;" so that it is "above" the table row that fires its own onclick event.

  • How to create event based process chains

    Hi All,
    I would like to know about event based process chains. In connection to this, could you please answer the following queries,
    1. How to create events
    2. How to link created event to the process chain in the same BI or BW system and as well as from  
        externel BI system.
    3. How link one process chain with other process chain (i.e, After completion of one process chain, it
        should trigger other dependent process chain)
    Thanks and Regards,
    Kotesh.

    1). Doubt regarding first question.
    For example, i would like to create time based event (it should be trigger daily at specified time),
    where we have to maintain scheduling options while creating event.
    When i checked SM62 there i found only two options a). Event name and b). Description.
    Could please send any doucument link if you have.
    Ans : You can use function modules like "BP_EVENT_RAISE" in a program and schedule the program to trigger.
    2). For externel BIW system also same procedure we need to follow or any difference.
    Ans : Externally you need to trigger the same event.
    3). i found dependent process chain also had scheduling options as direct scheduling insted of start using meta chain or API. As you said dependent process chain should be mata chain. it seems dependent process chain may be Meta chain or Direct scheduilg.
    Ans : Its your choice how you want to schedule it.You can either make that dependent chain a metachain or schedule it separately.
    I found at the end of first process chain they kept one process like Raise event and second process chain connected with the help of raise event process event name. If you have any idea about this process could explain a bit more.
    Ans : May be they are raising the event in the main chain and triggering the dependent chain using this event.
    But Metachain is preferred for such thing.Though it does similar thing.
    Hope this helps.

Maybe you are looking for