How to stop the execution of a program

greets folks
i want to know if its possible to stop or let in stand by the execution (run) of a program while HttpService responds the request??

No. All remote requests in Flex are asynchronous.It's part of how Flash Player works and you can't change that. You need to react to the event when the call completes. What are you trying to achieve?

Similar Messages

  • How to stop the get pernr in program    ITS URGENT......................

    hi all,
    i want to stop the get pernr after some lines and want to run the remaining lines of the programm which is not in logical database.
    ITS URGENT.....
    Thx in advance
    Sunil

    Hi,
    Try the REJECT statement followed by the name of the logical database.
    Example:
    REJECT 'PERNR'.
    Don't forget to assign points and close the thread when you are finished.
    Best regards,
    Guillaume

  • How Can we stop the execution of java program which contain infinite loop

    Dear All,
    I create one .bat file which which execute the simple java program
    I write one java program which execute above .bat file using instance of Runtime Class of java
    It's work fine if java program which is executed by .bat file is simple(Which has normal termination)
    But if that program contain inifinte loop then that file will goes on executing untill I close it manually
    So i want a solution in java which close that bat file (command window ) which is in running condtion
    If there any solution please replay me
    I try to close that .bat file using destroy() ,stop() method of Process and Runtime , Thread Class
    but it did not give me correct output
    .bat file still running !!!!!!!!!
    Thanks in advance

    Why not use javaw.exe to make the app run so you don't need the dos window (which is presumably what you are actually talking about when you say bat file).

  • How to automate the execution of several programs and use their output

    Dear java members,
    I am trying to figure out how to get data from a file, database, or program and use that information in another program. Can you help please?
    I have looked through several texts and while the information is there somewhere I have not found the specific capabilities or examples that explain how to do this.
    I want to learn how to do this with objects.
    The specific applications I am working with are the GIS (Geographic Information System) suite of ESRI products such as ArcInfo and ArcView.
    I am working with simulators for hydrologeology (ground water) and other geophysical phenomenae. Programs for decisions and assessment of probability such as found in geostatistical analyses packages. Drawing programs and data manipulation programs such as spreadsheets in windows and scripting languages found in most Unix packages.
    I want to be proprietary platform free! I want to be accessing apps and or data wherever they are and in whichever form they are in or best used.
    Web techniques and protocols are where I think most of my effort will be focused.
    One of the mediums (media) that I expect to use a lot is XML.
    If I can find a simplified (generalized) explanation how this is done and how the parts fit together through and or with objects. If I can find references to texts and examples I will be very appreciative and very much less confused.
    I am interested in using the Java programming language.
    Thank you
    ctavares1

    Hello Tavares,
    What you seek can be done, but before that you must know from where you want to take the data. In what form you will get the data in and where you want to use it and how.
    Your problem is what we call an architectural issue. If possible please write to me at [email protected]
    With the above information - I shall be able to help you to some extent.
    Ironluca

  • How can I stop the execution on a JSP page and start it again

    Hi
    I am making a program that simulates how to manage transactions when accessing a database by using locks. I have run into a problem and I hope someone has the time to help me.
    When a user does an update the transaction commits and releases its locks when the program executes
    <%stmt.executeUpdate("commit!"); %>
    I need to put a break in to stop the program executing this statement, to illustrate the lock is set correctly.
    I have tried to put in an alert box but this does not prevent the rest of the java code being executed.
    I have tried to use prompt boxes, JavaScript functions, but these functions cannot have any java code in them.
    I have tried using the java.swing JOptionPane boxes but this didn?t work either
    I have tried to get input from the user but I don?t know how to retrieve this data on the same page. (As far as I know you have to use submit and even refresh the page or retrieve it on the next page).
    Does anyone know how I can stop the execution on a JSP page and start it again (on same page)
    Mette

    I already have another client (Tomcat jsp application) running and it throws a SQLException correctly when I don�t put in a commit=true statement and don't close the database connection.
    But the problem is how to get the code above to stop to illustrate I have set this lock.
    I have tried to use the JOptionPane but because my program is running in a web browser I cannot use the JOptionPane dialog box.
    I have tired using an alert box but it executes the commit statement before the alert box is dispayed. So this does not work
    While (i < 2)
    if( i==1)
    %>alert(�The transactions commits when you press Ok�); <% //what it to stop execution here
    else
    stmt.executeUpdate(�commit�);
    I am not using threads so I cannot use the sleep function.
    I am using mysql and have already configured it to detect deadlocks and how long to wait for locks.
    Thanks for your help
    Mette

  • How do I stop the Adobe Product Improvement Program prompt?

    How do I stop the Adobe Product Improvement Program prompt from coming up every time I open Photoshop CS5 on my Mac, even after I have responded that I do not want to participate?  This is becoming very annoying and I have looked on line for a method to turn this off without luck.
    Thanks,
    Alan

    It only asks once.
    So it sounds like your preferences might not be getting saved for some reason (usually a permissions problem on your system)..

  • How to stop an execution from a method and thread?

    1,
    public void method(){
    if( something is true)
    //I want to stop this method
    //or if something is false, go on
    blablablablabla
    }Does any one know how to solve the above??
    2,
    Thread t = new Thread(){
    public void run(){
    if( something is true)
    //I want to stop and kill this Thread
    //or if something is false, go on
    blablablablabla
    }Again, how do I solve the above??
    I know this is very simple, but I just hit a wall when I encounter this on making a program for my project.
    please help
    thanks alot

    warnerja, for the method, I have tried "return" but
    it does not work... will it work on the run method of
    thread object??
    Secondly, doesn't "break" keyword only stops the
    execution of a loop/condition, but not the method's
    scope??yes. break breaks the loop. I thought your method doesnt have any other code except the condition.
    use return with thread.

  • How to stop the internal batch session

    Hi ,
    How to stop the internal batch session, which is triggered from the program.
    When I execute the program, there is an batch session, which starts processing in parallel with the program, and causes an error message for the program, so the further process is affected.
    I tried finding the session through the Transactions - SM35, SM37. However, I could find any session in my name.
    However, when I try thro SM04, I could find an session with the same error message. But I am not able to end the session.
    Pleas advise.
    Thanks,
    cartesian.

    Go through transaction SM50. In case you have more than one application server (transaction SM51 will show) you can also use SM66 which will show all running processes on all application servers.
    With SM50 you will only see the process running if it is running on the same application server you are logged on to.
    Mark the process and use menu 'Program/Session - End Session' or 'Process - End with or without Core'
    Hope that helps,
    Michael

  • HOW TO STOP THE PROCESS CHAIN WHICH IS RUNNING IN THE PRODUCTION?

    HI ALL,
    CAN ANYONE TELL ME HOW TO STOP THE PROCESS CHAIN WHICH IS RUNNING DAILY AT 5.00 PM. I NEED TO STOP THE PROCESS CHAIN FOR COUPLE OF DAYS AND THEN RESTART IT AGAIN.
    cAN ANYONE TELL ME THE PROCEDURE TO STOP THE ENTIRE PROCESS CHAIN RUNNING IN THE PRODUCTION.
    THANKS
    HARITHA

    Hi,
    First and foremost let me advice you to be very careful while doing this.
    For Rescheduling
    RSPC> chain > Goto > Planning view and
    click on Execution tab > select > Remove from Schedule and then in Maintain variant of start process reschedule for the day you require it to run.
    For terminating active chain
    You can start from SM37, find the process WID/PID then go to SM50 or SM51 and kill it. Once its done come back to RSMO and check the request, it should be red but again manually force to red and save by clicking on the total status button in the status tab. This shuld ensure that the process is killed properly.
    The next step will be to go to targets that you were loading and remove the red requests from those targets.
    Note: For source system loads you may have to check if the request is running in the source system and kill if needed and pull it again.
    But for BW datamart delta loads u may have reset the datamarts in case u are going to pull the delta again.
    Re: Kill a Job
    Re: Killing a process chain.
    Regards,
    JituK

  • How to stop the "minority report" type of personalized ads triggered by one's google search and appearing in the firefox browser?

    Please advise how to stop the "minority report" type of personalized advertising apparently triggered by one's google search and appearing in the firefox browser.
    == This happened ==
    Every time Firefox opened
    == a few months ago

    If another uses the computer with their own user account, everything
    is kept separate in each users folder. Only if someone used your account
    would that be an issue.
    Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
    * [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Did this fix your problems? Please report back to us!

  • How to stop the thread?

    Hi,
    How to stop the thread in java. This is my program.
    import java.net.InetAddress;
    public class ThreadPing extends Thread {
         ThreadPing(String pingIP)
              super(pingIP);
              start();
         public void run()
              try
              String pingIP = Thread.currentThread().getName();
              InetAddress inet = InetAddress.getByName(pingIP);
              Boolean get=inet.isReachable(1500);          
              if(get==true)
                   System.out.println(inet.getHostName());               
              }catch(Exception e)
         public static void main(String args[])
              for(int i=1;i<=100;i++)
                   String pingIP = "192.168.1."+i;
                   ThreadPing tp = new ThreadPing(pingIP);
    Thanks in advance.

    The simplest way to stop all the thread is to make all thread daemons and exit the program when you want them to stop.

  • How to stop the pdf reading record?

    How to stop the pdf reading record? I don't want my track record to be leave on the computer.

    Exactly what face reading program are you talking about? Did you download and install it?
    Also, please furnish relevant information: Mac model/year.

  • How to stop the Calendar from editing your input?

    How to stop the Calendar from editing your input?

    I am constantly finding that Calendar Version 8.0 thinks it knows what I want to type but it incorrectly takes numbers and days and times out of my input and changes my appointments. I hate this new supposedly "smart" feature. Even when I edit my event correctly a second or third time it rewrites my input incorrectly again. I have to use my iPhone to override the annoying editing on my mac. I am ready to find a new calendar program unless Apple allows users to input what they want without their information being incorrectly edited.

  • How to stop the spinning wheel?

    How to stop the spinning wheel?

    Back up your documents and everything else important to you, not that there is any reason to believe your hard disk may be failing, but the symptoms you describe may presage an impending disk failure, and you should have backups anyway.
    Boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac. At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red.
    When it finishes restart your Mac and test again for operation. If it's still not behaving as you expect it should, please post the results of EtreCheck in accordance with the following instructions:
    Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Go to his website, download and run EtreCheck:
    http://www.etresoft.com/etrecheck
    Etrecheck will be in your Downloads folder. Open it from there. You may see the following dialog box:
    Click Open - etresoft contributes to this forum frequently and can be considered a trustworthy developer.
    It will take a moment to run as it collects its data.
    Copy and paste its output in a reply.
    Do not be concerned about anything that says "Problem" or "failed".
    EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
    When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish.

  • Anyone know how to stop the "activate" box from blocking usage of a perfectly legal copy of Ilisten? I want to help my dyslexic grandson and this box, including the activation code, keeps popping up, keeping me from using the software. I activated the pro

    Anyone know how to stop the "activate" box from blocking usage of a perfectly legal copy of Ilisten? I want to help my dyslexic grandson and this box, including the activation code, keeps popping up, keeping me from using the software. I activated the program and did a few profile building sessions, now it pops up each time I start the program, blocking me from using it. Help sure would be appreciated.
    Jay

    I looked at your post this morning and did not know enough to respond, other than to find out that links to iListen now go to newer, renamed software. Considering it's been nine hours with no response, I'm suspecting few people here have experience with that software. You could contact the current copmany that used to sell that package and see if they have any archived support info.
    BTW: please check you entry for "Mac OS" in your profile. It says iOS, which cannot run on an iMac. iOS is the system for phone and iPads but can't run on Mac computers. Do "About this Mac" from the Apple menu and see what it says about the OS version. Should look like this:
    If the "Processor" line says "Intel," you have a newer Mac than the old modles this forum covers; Intel iMac have their very own forum here:
    iMac (Intel)

Maybe you are looking for