How to store data from a complex query and only fresh hourly or daily?

We have a report which runs quite slow (1-2 minutes) because the query is quite complicate, so we would like to run this query daily only and store in a table so for those procedures that need to use this complex query as a subquery, can just join to this table directly to get results.
However, I am not sure what kind of object I should use to store data for this complex query. Is data in global temp table only persist within transaction? I need something that can persist the data and be access by procedures.
Any suggestions are welcome,
Cheers

Thank you for your reply. I looked at the materialized view earlier on, but have some difficulties to use it. So I have some questions here:
1.The complex query is not a sum or aggregate functions, it just need to get data from different tables based on different conditions, in this case is it still appropriate to use meterialized view?
2.If it is, I created one, but how to use it in my procedure? From the articles I read, it seems I can't just query from this view directly. So do I need to keep the complex query in my procedure and how the procedure will use the meterialized view instead?
3. I also put the complex query in a normal view, then create a materialized view for this normal view (I expect the data from the complex query will be cache here), then in the procedure I just select * from my_NormalView, but it takes the same time to run even when I set the QUERY_REWRITE_ENABLED to true in the alter session. So I am not sure what else I need to do to make sure the procedure use the materialized view instead of the normal view. Can I query from the Materialized View directly?
Below in the code I copied from one of the article to create the materialized view based on my normal view:
CREATE MATERIALIZED VIEW HK3ControlDB.MW_RIRating
PCTFREE 5 PCTUSED 60
TABLESPACE "USERS"
STORAGE (INITIAL 50K NEXT 50K)
USING INDEX STORAGE (INITIAL 25K NEXT 25K)
REFRESH START WITH ROUND(SYSDATE + 1) + 11/24
NEXT NEXT_DAY(TRUNC(SYSDATE), 'MONDAY') + 15/24
enable query rewrite
AS SELECT * FROM HK3ControlDB.VW_RIRating;
Cheers

Similar Messages

How to store data from textfile to vector and delete a selected row.

Can someone teach me how to store data from textfile to vector and delete a selected row. And after deleting, i want to write the changes in my textfile.
Do someone has an idea? :)

nemesisjava wrote:
Can someone teach me how to store data from textfile to vector and delete a selected row. And after deleting, i want to write the changes in my textfile.
Do someone has an idea? :)What's the problem? What have you done so far? What failed?
What you described should be pretty easy to do.

How to upload data from excel to SAP and options to be used

How to upload data from excel to SAP and options to be used
thank you,
Regards,
Jagrut Bharatkumar shukla

Hi Jagrut,
You can use gui_upload.
chk the sample program mentioned below.
REPORT ZFTP .
DATA: BEGIN OF I_FILE OCCURS 0,
DATA(2000) TYPE C,
END OF I_FILE.
DATA: BEGIN OF I_FILE2 OCCURS 0,
DATA(2000) TYPE C,
END OF I_FILE2.
DATA: W_COUNT TYPE I.
PARAMETERS: P_FILEN TYPE STRING,
P_FILE2 TYPE STRING,
P_NUM(4) TYPE N..
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILEN.
PERFORM F_FILE_GET USING P_FILEN TEXT-G01.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE2.
PERFORM F_FILE_GET USING P_FILE2 TEXT-G01.
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = P_FILEN
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
VIRUS_SCAN_PROFILE =
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
HEADER =
tables
data_tab = I_FILE
IF SY-SUBRC <> 0.
MESSAGE E024(Z1).
ENDIF.
LOOP AT I_FILE.
W_COUNT = W_COUNT + 1.
IF NOT W_COUNT > P_NUM.
MOVE I_FILE TO I_FILE2.
APPEND I_FILE2.
ENDIF.
ENDLOOP.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = P_FILE2
FILETYPE = 'ASC'
APPEND = ' '
WRITE_FIELD_SEPARATOR = 'X'
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
IMPORTING
FILELENGTH =
tables
data_tab = I_FILE2
FIELDNAMES =
*& Form F_FILE_GET
text
-->P_P_FILEN text
-->P_TEXT_G01 text
FORM F_FILE_GET USING L_FILENA L_TEXT.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
DEF_FILENAME = ' '
DEF_PATH = ' '
MASK = ',.,*.TXT.'
MODE = 'O'
TITLE = L_TEXT
IMPORTING
FILENAME = L_FILENA
rc =
EXCEPTIONS
INV_WINSYS = 1
NO_BATCH = 2
SELECTION_CANCEL = 3
SELECTION_ERROR = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Reward if helpful.
Regards,
Harini.S

How to extract data from SAP 4.7 and upload data to SAP ECC 6.0

Hi,
How to extract data from SAP 4.7 and upload data to SAP ECC 6.0? Can i use BDC,BAPI,LSMW? Help me please.

hi
good
both works not possible simultaneously.
If you want to do it in two separate task than you can use the GUI_UPLOAD function module to fulfill your requirement.
thanks
mrutyun^

How to create a transport request with query and only with its structure.

HI guru,
how to create a transport request with query and only with its structure.transport request should not include any other query items like ( variables, conditions...etc)
thanks in advance.
venkata

Hi,
Goto RSA1 and then Transport Connection -> In SAP Transports select Object Types-> Query Elements -> Then select Query->Give Technical name of the query and then select for transfer. In the right side you can choose the components which you wanted to transport.
Regards,
anil

How to store data from Host.vi in cRIO-9074

TejasKumar Patel
I implemented a advance Measurement and Control system using cRIO-9074
with c-Series I/O cards( NI 9217, 9411, 9264)
I have some questions about it,
(1)- Data rate from FPGA targate to host vi is too low. how can I increase
it, when I run my host VI, sometimes all temperature sensor update at
same time and sometimes one by one, can you please give me some hint, how
can I correct it, I used two FIFOs for NI-9411 digital pulses, I put all
Digital input and all analog output and input in a seperate while loop in
FPGA targate VI.
(2)- I have to write that data to analyse for further result. I tried all
possible way to write data including wite to spreadsheet.vi, write to
text.vi, Data storage.vi, Write to measurement.vi. All this VI work
efficientlywhen it run individualy, But when I connect this VI to
writedata from FPGA host VI. than it always give empty file.
I saw your post in NI discussion forum about how to write data from
Host.vi, But still I am confuse that how can I creat a protocol between
host VI and Fpga target vi. to write the data in a file. I have nearabout
38 channel to write data.
(3)- I have to measure time difference between two digital pulses, to find
a flow rate. I am using counter for it with risisng edge shot.vi, but when
i get a timestemp when there is risisng edge for the second rising edge
how can I get timestemp. Its like i have to measure time between two
pulses, I triend waveform measurement.vi to find cycle period. but it not
worked. any other was to measure it.
I am stuck in this question since from last one month. I already followed
NI-discussion forum solution but it doesnt work. I think the way I applied
is may be wrong.
Looking forward to hear from you soon.
Plese send an additional email copy to [email protected]
Thank you and Best Regards,

Thanks Joseph for your support,
1-      If I count the ticks between the pulses it always seems different ….because this method I already tried, but it does not work, like some times it shows 9099 tick and at the second pulse it shows like some more or less ticks not the same ticks every time. To complete my project, the biggest problem is the data storage.
2-      As you gives the solution in NI forum, “low level file I/O Vis such as Write to text file” FPGA target not support this VI. And mainly I want to write data from HOST.vi, because I am process those data …and I need to store it. For to figure out my result.
3-      If I use “Write to text file. VI (Sub-VI ) to FPGA.vi, it not support because it support string data and I have FIXpoint data. And can you explain me what is low level file IO, and how can I use in fpga.vi??
4-      Yes, for my project time stamp it really necessary, for data analysis.
5-      I need the time stamp to find out what was the system response at the time. As our project based on weather temperature, I need time stamp.
Waiting for your reply,
Thanks and Regards,
Patel

How to select data from one nested table and into another nested table

create or replace
TYPE ctxt_code_rec as object
ctxt_header varchar2(10),
header_description varchar2(300),
status varchar2(30),
adjacent_code varchar2(300),
adjacent_desc Varchar2(400),
adjacent_flag varchar2(4000),
adjacent_text_href varchar2(4000)
create or replace
type ctxt_code_table as table of CTXT_CODE_REC
d_table ctxt_code_table ;
v_tab ctxt_code_table ;
Iam trying to select data from d_table to v_tab
using and bulk collect into
select m.*
bulk collect into p_code_result
from table(l_loop_diag_code_table1)m
order by 1;
Receiving error:
ora 94007 : not enoughvalues
Could you please let me know how to solve it?
Thanks,
in advance

>
create or replace
TYPE ctxt_code_rec as object
ctxt_header varchar2(10),
header_description varchar2(300),
status varchar2(30),
adjacent_code varchar2(300),
adjacent_desc Varchar2(400),
adjacent_flag varchar2(4000),
adjacent_text_href varchar2(4000)
create or replace
type ctxt_code_table as table of CTXT_CODE_REC
d_table ctxt_code_table ;
v_tab ctxt_code_table ;
Iam trying to select data from d_table to v_tab
using and bulk collect into
select m.*
bulk collect into p_code_result
from table(l_loop_diag_code_table1)m
order by 1;
Receiving error:
ora 94007 : not enoughvalues
Could you please let me know how to solve it?
>
Not unless you provide the code you are actually using.
There is no definition of 'p_code_result' in your post and you say you 'trying to select data from d_table' but there is no code that loads 'd_table' in what you posted.
And the SELECT query you posted actuall selects from an object named 'l_loop_idag_code_table1' which isn't mentioned in your code.
Post the actual code you are using and all of the structures being used.
Also explain why you even need to use nested tables and PL/SQL for whatever it is you are really doing.

How to derive date from given month, year and day?

Hi all,
I have a doubt in date function. I need to create a date from the given month, year and day. How can i do it?

consider this example
REPORT zconvertdate001 .
TYPES : BEGIN OF tt_date_in,
        day(2),
        sep1,
        month(3),
        sep2,
        year(4),
        END OF tt_date_in.
DATA : wa_date_in TYPE tt_date_in VALUE '07-Jul-2006'.
TYPES : BEGIN OF tt_date_out,
        day(2),
        month(2),
        year(4),
        END OF tt_date_out.
DATA : wa_date_out TYPE tt_date_out.
TRANSLATE wa_date_in-month TO UPPER CASE.
SELECT SINGLE mnr
INTO wa_date_out-month
FROM t247
WHERE spras EQ sy-langu
AND   ktx EQ wa_date_in-month.
CONCATENATE wa_date_in-year wa_date_out-month wa_date_in-day
       INTO wa_date_out.
WRITE : / ' Date in:', wa_date_in,
        / 'Date out:', wa_date_out.

How to Extract data from a flat file and how to upload it into table

Hi
i want to extract the data from a web page, that data i want to keep in text file.
from the text file i want to read it and i want to upload into table
can any one help me its very urgent

here is my 20min try without debugging (needs a rs232 and loopback connector )
use the probe and highlight the dataflow to see how it works.
as always: there are many ways to solve your problem
Greetings from Germany
Henrik
LV since v3.1
“ground” is a convenient fantasy
'˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'
Attachments:
read write file to RS232.vi ‏69 KB

How to load data from text.txt fiel and tokenize it into JCombo box???

Hi Everyone,
I am new to Java and Netbeans. I am working on the same GUI project and need your Help!!
I have two queries and since i am new,please if possible explain step by step
1.) How can I load the contents of data stored in sometext.txt file when i click the JCombo box]?? Also, if i enter a new string not existing in text, it should display a message and add the new entered data into the sometext.txt file.
2.) How can i input the contents of table.txt file (which has characters seperated by Tab) into a JTable into specific rows and columns??. Again, the txt should add and update the new entered data.
I dont want to use any databse connection!!
Explainations with Examples/Attachments will be greatly and truly appreciated
Please Please Help me ASAP as i have to submit this assignment by next week!!

hi camickr,
I tried to load a file into Jtable. I have used random access file method to read a large text file seperated by tabs. When i tried to run the file, i was unable to load the data from the file. i guess i am missing the link between custom table and the default table. Can you please help me?
The complete code is attached below:.(The reason i am attaching the whole code is ..so that you can check me where i am going wrong, please dont mind!!)
package javaapplication;
import java.io.*;
import java.util.ArrayList;
import javax.swing.table.AbstractTableModel;
public class table extends javax.swing.JFrame {
/** Creates new form table */
public class FileTableModel extends AbstractTableModel {
RandomAccessFile raf;
ArrayList<Long> lineToPos = new ArrayList<Long>();
int columnCount = -1;
public FileTableModel(String fileName) {
try {
raf = new RandomAccessFile(new File(fileName), "C://temp.txt");
lineToPos.add(new Long(0));
String line = null;
while ((line = raf.readLine()) != null) {
if (columnCount == -1)
columnCount = line.split(" ").length;
lineToPos.add(new Long(raf.getFilePointer()));
lineToPos.remove(lineToPos.size()-1);
} catch (Exception e) {
e.printStackTrace();
protected void finalize() throws Throwable {
super.finalize();
raf.close();
public int getColumnCount() {
return columnCount;
public int getRowCount() {
return lineToPos.size();
public Object getValueAt(int rowIndex, int columnIndex) {
try {
raf.seek(lineToPos.get(rowIndex).longValue());
String line = raf.readLine();
String[] strs = line.split(" ");
return strs[columnIndex];
} catch (IOException e) {
e.printStackTrace();
return null;
/** This method is called from within the constructor to
* initialize the form.
* WARNING: Do NOT modify this code. The content of this method is
* always regenerated by the Form Editor.
@SuppressWarnings("unchecked")
// <editor-fold defaultstate="collapsed" desc="Generated Code">
private void initComponents() {
jScrollPane1 = new javax.swing.JScrollPane();
jTable1 = new javax.swing.JTable();
setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
jTable1.setModel(jTable1.getModel());
jScrollPane1.setViewportView(jTable1);
javax.swing.GroupLayout layout = new javax.swing.GroupLayout(getContentPane());
getContentPane().setLayout(layout);
layout.setHorizontalGroup(
layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
.addGroup(layout.createSequentialGroup()
.addContainerGap()
.addComponent(jScrollPane1, javax.swing.GroupLayout.PREFERRED_SIZE, 375, javax.swing.GroupLayout.PREFERRED_SIZE)
.addContainerGap(15, Short.MAX_VALUE))
layout.setVerticalGroup(
layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
.addGroup(layout.createSequentialGroup()
.addContainerGap()
.addComponent(jScrollPane1, javax.swing.GroupLayout.PREFERRED_SIZE, 275, javax.swing.GroupLayout.PREFERRED_SIZE)
.addContainerGap(14, Short.MAX_VALUE))
pack();
}// </editor-fold>
* @param args the command line arguments
public static void main(String args[]) {
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
new table().setVisible(true);
// Variables declaration - do not modify
private javax.swing.JScrollPane jScrollPane1;
public javax.swing.JTable jTable1;
// End of variables declaration
}

Without NI DAQ device- how to get data from MSP into labVIEW and process it

Hi,
I do not have an NI DAQ device. I have an MSP430 and my sensor is an ADXL335 Accelerometer. How do I get data from my MSP into labVIEW and process it?
Just looking for a nudge in the right direction. I'm having a hard time finding resources on labVIEW that don't involve NI specific DAQs.
Thanks in advance,
Aziz

There are many ways to get data into LabVIEW that do not involve NI-DAQ devices.
I think your easiest option would be to stream it via serial port if the data rate isn't too fast.
Troy
CLDEach snowflake in an avalanche pleads not guilty. - Stanislaw J. Lec
I haven't failed, I've found 10,000 ways that don't work - Thomas Edison
Beware of the man who won't be bothered with details. - William Feather
The greatest of faults is to be conscious of none. - Thomas Carlyle

How to retrive data from infotype 0008 &0021 and dispaly as alv output

hi all,
i have to read data from infotype 0008 and infotype 0021 and display as alv grid..
can any one help me..
<removed by moderator>
regards,
viswanath
Moderator message: please search for information and try yourself before posting here.
Edited by: Thomas Zloch on Jan 12, 2012

Hello Sourabh,
If I am not wrong, there are two parts two your query...
a) Data or Content Retrieval
b) Displaying Retrieved content
Here is my feedback
a) The Content can be Retrieved using the FM ARCHIV_GET_TABLE.
Pass the Archive Object, SAP Object and the SAP Object ID and based on the Connection table entries (TOA*), the underlying Content Repository (T-code OAC0) is determined and a request for synchronous retrieval is made to the Content Server.
b) Display of Retrieved content is normally done through dedicated viewers (Ex: Livelink Viewer) or front-end applications (Excel, Word) based on the Protocol (OAA3/OAA4) specified in the Content Reository Configuration. Hence, to my knowledge, you cannot display the content directly in the Smartform.
With Regards
Vijay Gajavalli

How to Fetch Data From Standard Table MARA and Display using BOPF ?

Hello All,
In BOPF creation of Quey to a node fetches data from the Data Base Table attached to that Node,
But in my requirement I have to fetch data Present in a Standard table and Display it in the FPM List Using FBI.
** Can we Fetch the data From Standard Table and fill the Node in BOPF, Is this possible as the standard Table do not contain KEY field which BOPF uses for Data Fetching ?
Kindly share your Idea's .
Thanks in Adv.

Hi Dhivya,
Thanks For your Response.
In my Requirement I want to make ROOT Node as Transient Node.
When I create a Sub Node to a Root Node, I am able to get this option to make this sub node as a Transient Node .
By selecting 'Standard<-->Extended' option in the Menu item 'GoTo' I am able to get this Transient Node check box field for the Sub Nodes.
I want to make a ROOT Node as a Transient Node.
(Which Version you are using, and which transaction you are using to create BO . we are using BOBX Transaction, Version Ehp 6 )
Kindly Guide me .
Thanks,
Kranthi Kumar.

How to save data from JTable multiple rows and columns

Hi Y_Not thanks for your help before...
But what should I do if I want to get/save many data from many column and rows??

i don't quite understand your (repeated) question. what is the problem with "multiple rows and columns". Y_NOT and i have shown you ways to access them.
all you need are 2 loops: one around your number of rows and one around the number of columns or vice versa depending in which order you want to save things:
for (int col = 0; col < data.size(); col++) {
    for (int row = 0 ; row < data[col].size(); row++) {
        // save your data
        saveData(data[col].getElementAt(row));
        // or use yourtable.getValueAt(row, col);
}this is not a problem of Swing/Java but of simple algorithm...
thomas

How to copy data from a Input query to real time Infocube

Hi All, I need some help on IP related stuff. The details are as below:
I am using two real time infocubes and one Multiprovider on them.
First Infocube u2018PRODUCTu2019 with the following Objects:
Product Group ,Product,Region ,Fiscal Year , Fiscal Year Varient ,0currency
Gross Sales
Second Infocube u2018C_PRODUCT u2018 with the following Objects:
Product Group ,Product,Region ,Fiscal Year , Fiscal Year Varient ,0currency
Gross Sales and Forecast Sales
( u2018Forecast Salesu2019 in the extra object in the second Infocube. Remaining objects are same in the both the cubes)
First Infocube u2018Productu2019 has data but the second cube does not have any data.
I have created a Multiprovider ZMulti and in that I have included these two cubes. On this Multi Provider, I have created a Aggrigation Level(The details of the aggregation level is provided in the next page).
On this Aggrigation level I have built a Input Query by which I run the report.
(In the Rows area, I have taken Product Group, Product, Region and Fical year.
In the Key Figure section, I have taken Gross Sales and Forecast Sales( which is part of the second Infocube C_Product). These two Key Figures are made Input as Input ready. And the Query is Input ready query. In the Filter, I have taken Fiscal Year Variant. )
Data available in the first cube and no data currently in the second cube. Now executed the report and report displayed information from the first cube.
EX:
Product     Product     Region          Year     Gross Sales     Forecast Sales
Group
PG01           Beer           North           2008           10000           u2026u2026u2026
PG01           Beer          South          2008          20000           u2026u2026u2026
PG01          Beer          East          2008          15000           u2026u2026u2026
The second column is empty and there is no data for the Forecast sales Key Figure in the column.
Things look OK till the above.
Now based on the Gross Sales, I am entering forecast Sales values and I need to save the entire record to the second cube.
For this in the report, I have given the Forecast sales values in the second column and right clicked the mouse and form the menu which I got, selected the u2018SAVEu2019 Option to save the data. For some time, I can see u2018Processingu2019 message and later values at u2018Forecast Salesu2019 are disappearing.
Data is not saving to the cube second cube.
====================================================
Am I missing any thing?
In the Query, Do I need to provide InfoProvider and restrict it to specific value?
In the query, Do I need to include, 0currency object?
Could you please guide me on this?
=============================================
Details of the Aggrigation level.
            I have created an Aggrigation Level ZAL_Prod on MultiProvider.
            Selected all the objects and activated.
            In the Filter, I have taken 0Fiscal Year Variant and saved it.

Restrict Forecast sales to the Plan cube in the Query.
that should fix it.

How to store data from a complex query and only fresh hourly or daily?

Similar Messages

Maybe you are looking for