How to stream live on front panel by given browser url

Hi,
I have an IP Camera which can be viewed online through a given url.
However, i am stuck trying to display the live stream on my front panel. DAQ-Max is not needed because the camera is already integrated to software.
Attached is my VI so far, and here is the website:
http://153.20.39.66:8051/
Click on mobile mode to see the live video stream.
However there is an error at the "READ JPEG file" when i run the VI. I dont really understand the error?
I just need to link the VI's front panel to the live stream video via url. How do I do that? Thank you in advance!
Attachments:
IP Camera sub VI.vi ‏23 KB

You might try implementing a web browser within LabVIEW to view your video stream. Check this link out: https://decibel.ni.com/content/docs/DOC-2042
-RGW

Similar Messages

Can someone tell me how to stream live video?

Can someone tell me how to stream live video to my ipad?

Someone could give you better and more exact information but you didn't include the model number of your computer. But I can give you a pretty generic answer. At the top of this webpage you should see Product Support. Click on Laptops and then select which model of Toshiba computer you own, ie Satellite, Tecra, etc. Finally type in the model number of your computer. Select the exact model number and click the red Go button to the right. Click the Downloads tab and look thru the different drivers for this computer. Make sure that the new video driver is newer and has a higher version number than your current video driver. If it does, click the Download button, click the Run button and let it do the installation. Afterwards, reboot the computer so that the latest drivers are fully installed. Try again with that game.

How to make the LV front panel controls the current value through the program is set as the default value when the next time you open?

How to make the LV front panel controls the current value through the programis set as the default value when the next time you open?
1110340051

Try this: Re: How to make a VI remember the latest control value?
Jim
You're entirely bonkers. But I'll tell you a secret. All the best people are. ~ Alice

Best Way to Host Front Panel in Web Browser

Hello All
I am almost confused with all methodology that Labview have to host the Top Level front panel in Web browser. My requirement is to Monitor and control the Front Panel from remote location using web browser, but without installing any LV Runtime engine in Client machine. Also I want to stream the Videos in same or different page. Which is the best way to do this?. Web-service or CGI
Thanks & Regards
Rigilkumar

Rigilkumar,
If you don't want to install the LV runtime engine, that rules out the remote front panels. However, you should still be able to build a web service to do what you want. This will be a bit more tedious because you'll have to build a thin client to have an interface with the web service. You can find an example of a thin client built in Adobe Flex here.
If you're looking at streaming video as well, I recommend you look over Streaming IMAQ Images Over a Network (or Internet)
Hope this helps,
Misha

How can I display the front panel of the dinamically loaded VI on the cliente computer, the VI dinamically loaded contains files, I want to see the files that the server machine has, in the client machine

I can successfully view and control a VI remotly. However, the remote VI dinamically loads another VI, this VI loaded dinamically is a VI that allows open others VIs, I want to see the files that contains the server machine, in the client machine, but the front panel of the dinamic VI appears only on the server and not on the client, How can I display the fron panel with the files of the server machine of the dinamically loaded VI on the client computer?
Attachments:
micliente.llb ‏183 KB
miservidor.llb ‏186 KB
rdsubvis.llb ‏214 KB

I down loaded your files but could use some instructions on what needs run.
It seems that you are so close yet so far. You need to get the data on the server machine over to the client. I generally do this by doing a call by reference (on the client machine) of a VI that is served by the server. THe VI that executes on the server should pass the data you want to diplay via one of its output terminals. You can simply wire from this terminal (back on the client again) to an indicator of your choosing.
Now theorectically, I do not think that there is anything that prevents use from getting the control refnum of the actual indicator (on the server) of the indicator that has the data, and read its "Value" using a property node. I have never tried this idea but it seems t
hat all of the parts are there. You will need to know the name of the VI that holds the data as well as the indicator's name. You will also have to serve all VI's. This is not a good idea.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How can I use multiple front panel controls to be mirrors of each other?

Hi All:
I know this is going to be a strange question, but I have multiple inputs that control one output. This in itself not necessarily difficult, but I have a strange need. If one of the control inputs change I would like this to be indicated by the other controls. For example, I have a slider, numeric and dial controls on the front panel that control RPM. If the slider changes to 1000 RPM I would like the numeric and dial controls to see that change. Is this possible. If so, can you give me advice on doing this. I am using 7.1. Thanks for the help.
John Honnold

What you want is not that hard, but asked for a rather limited times.
Here's a how to:
Drop a slider
Right click Visible items-> Digital display
Right click on the slider Advanced-> Customize
Right click on the Digital display Replace select the control you want to replace it with (a gauge for instance)
Right click on the Gauge Visible items -> Digital Display
Now you have one control with three control options:
This was done in 8.2 but I think the same goes for 7.1
Ton
Message Edited by TonP on 04-06-2009 09:52 AM
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!
Attachments:
Example_VI.png ‏7 KB

How can i access remote front panel in RT with LabVIEW run time engine in client PC

Hi to all,
I have developed the RT application with cRIO 9075 integrated chassis. And i have access its remote front panel in client PC. Now i want to access the remote panel in the client PC without having LabVIEW runtime engine. If i connect the remote panel with that client, it shows only the vi border. i doesn't downloads the front panel.
How Can i access its remote front panel without LabVIEW runtime engine in the client PC?

You cannot view a remote front panel without the LabVIEW runtime - the LabVIEW runtime is what makes the remote front panel possible. What you will want to do instead is likely create a Web Service that you can access from a remote PC without requiring the LabVIEW runtime. However, this will require you to develop a web-based HTML or similar UI to interact with the VIs running on your system - NI hasn't yet created a way to export a LabVIEW front panel as an HTML'ish page.
-Danny

Help! how to make transparent front panel

Hi:
I intend to show a vi when my system call it but the backgound have color and I want it to be transparent. I search inside forum and get this thread http://forums.ni.com/ni/board/message?board.id=170&message.id=178411&query.id=105714#M178411 . After that I try follow that method using "call DLL" to let my front panel become transparent but I fail.
I attach my vi and hope come one can help.
thank in advance.
Attachments:
Enter OP ID.vi ‏50 KB

TK Chang wrote:
Thank a lot tst, it work.
By the way I am try to understand how to use windows API. For example function "GetWindowLong" got 2 parameter one is "hWnd" I know is get the window name and the other "nIndex" I search in MSDN (http://msdn.microsoft.com/library/default.asp?url=/library/en-us/winui/winui/windowsuserinterface/wi...) but I can't figure out why the input value is "-20".
Same as function "SetWindowlong" and "SetLayeredWindowAttributes". All these APi i can find the explaination in MSDN but I don't know what value I should put for those parameters. Is there anyway to find out what vaule I should give for those parameter?
yes, if you can get that example for change bmp shape then pass to me.
Thank very much
Message Edited by TK Chang on 01-11-2007 09:44 PM
That is because Micrososft defined for readibility constants and usually only documents them in MSDN. If you want to know the numeric value (which you need when trying to call such a function from non-C environments) you basically have to install the plattform SDK from Microsoft and search in the headers for the constant name and see what value it has assigned too.
A search of the constant name as documented in the SDK on the web might sometimes also give results such as an include form for Visual Basic, and interface description for Delphi or simply C header files from some Wine patch, but there is no quarantee and you might have to look through many hits before finding something useful.
All these options do however require you to understand a bit about the syntax of the programming environment you got the solution from such as C syntax (the plattform SDK is completely for C(++) too), Delphi, or Visual Basic.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

How to create an attracting front panel

Hello Experts,
Kindly share, how to design a Good Look Front Panel that have a view of an Instrument.
Thanks
Solved!
Go to Solution.

Hi,
We definitely need more information than that in order to help you.
Here are a few general discussions of UI design:
http://zone.ni.com/devzone/cda/pub/p/id/686
http://decibel.ni.com/content/servlet/JiveServlet/previewBody/11977-102-2-21371/TS3402-SW.pdf
http://zone.ni.com/devzone/cda/tut/p/id/5092
This seems like it is more like what you might want, but it is hard to be sure:
http://zone.ni.com/devzone/cda/tut/p/id/10355
http://www.ni.com/labview/whatis/user-interface/
or one of these:
http://sine.ni.com/nips/cds/view/p/lang/en/nid/209118
http://sine.ni.com/nips/cds/view/p/lang/en/nid/209119
http://sine.ni.com/nips/cds/view/p/lang/en/nid/209120
Thanks,
D Smith

How to move control in front panel at run time

       Hi,
                I'm using LabVIEW 8.5. I want to move the control anywhere in front panel. For example in the attach file I want to pick up the pict control (with the help of mouse) and drop it anywhere in front panel. second thing I want to ask if I want to make it copy paste, means main control will b at its initial position and where the mouse moves the image moves and when I leave the mouse the image gets drops there. How to do it. Please help me.
                             - Thank You
Attachments:
track.vi ‏15 KB

"Sonali" <[email protected]> wrote in message
news:[email protected]..
Hi,            &
nbsp;   I'm using LabVIEW 8.5. I want to move the
control anywhere in front panel. For example in the attach file I
want to pick up the pict control (with the help of mouse) and drop
it anywhere in front panel.
You'll need to use an event structure to respond to the mouse down, mouse
move and mouse up events. In the mouse down event of the control, set a
value in a shift register to true. In the mouse move event, when the value
is true, change the position of the control with a position property node.
In the mouse up event of the control, set the boolean in the shift register
to false.
 second thing I want to ask if I want to make it copy
paste, means main control will b at its initial position and where the
mouse moves the image moves and when I leave the mouse  the image gets
drops there. How to do it. Please help
me.            &
nbsp;           &nbsp
;   
You can't copy paste controls during run time. It seems you want to make a
graphical application, where you can graphically drag and drop some
configuration or something like that. You should have a look at the picture
control. You can draw anything you want in this control, and catch mouse
down, move and up events in the same way. It is perhaps a bit difficult to
get to know it, but it is very powerful when you do.
Regards,
Wiebe.

How to bring a VI front panel to the front (of all open windows) when the parent VI calls a sub-VI in Test Stand.

In Test Stand when I call a sub-VI front panel, the pop-up window goes behind all the windows and the user just waits for the screen. I want the pop-up to come to the front so that the user can know what to do. I couldn't find any property that I can set which would make the called VI go to the front.

What version of TestStand are you using? Here are the TestStand palettes in LabVIEW for TestStand 2.0 and 3.1. You can also set a VI to be modal in VI Properties>Window Appearance. Select Dialog or go to Cutomize and change the Window Behavior.
Message Edited by Dennis Knutson on 03-07-2006 10:32 AM
Attachments:
TestStand palettes.JPG ‏37 KB

How can I enable my front panel audio??

the type of my mainboard is MS-6552,when I inserted my earphone and microphone into the jack of the box,I can hear nothing! then I opened the box,I found that the wire was not the proper place,there were 8 wires whick marked with “MIC IN,GND,LIN,LOUT,MIC IN,GND,RIN,ROUT”,I also found the F_AUDIO on the mainboard,there were 18 pin on it,I cannot matching them! who can help me?thanx

Look through you mobo's manual and you'll find it... Don't get stressed out too early... The first computer I built myself got me stuck in the same area for hours!!!
Btw, you've got to remove the jumpers on your mobo to enable front panel sound. Be warned that most mobo only allows you to us either front panel or back panel sound only. Please also ensure that there are no stand offs underneath your mobo.
All the Best... :D!!!

How to define area of front panel scroll bars so that you can't scroll to empty areas?

The front panel of my executable VI has scroll bars. Is is possible to set the scroll bars so that one
cannot scroll to areas where there isn't anything present? Can I define the usable area of the front
panel to labview?
Thanks...
-Umar.

Hello...
Try this one==>> File - VI Properties - Window Appearance - Select Custom - Customize - Deselect Show Scroll Bars - Save VI
Hope this will help you...

How do I keep the front panel on top of every windows (including non-LabVIEW windows)?

The question above states it all. Basically I have a progress bar the tells the user to wait and I want it to remain in front of anything that pops up while it is running. My program opens up and deploys a VeriStand project and while it is doing that I dont' want the user to be able to do anything in the front panel that launches it. When VeriStand launches it goes in front of the status window and you can't see it anymore. I want to prevent this from happening and keep it in front of any VeriStand windows that pop up when I call the executable and the deploy an SDF. I did take a look at the WINUTIL.llb but it keeps either 1) giving me errors or 2) not keeping it on top of anything but the main front panel.
Any fixes or alternative solutions would be much appreciated. Thank you.

I did read that earlier and I just think I don't know enough of what I'm doing with library calls to make it work. I kept getting errors and gave up on at the end of the day yesterday. I'm working on other problems since this isn't a major one and figured I'd post it and see if anyone already had a solution to it.
Thanks for the help though, it's appreciated.

How to add image of Front panel TAGS to html report?

I have a VI with several tabs some of which I would like to append to an HTML report. So far I have managed to include just the front panel front tab (using the Append Front Panel Image to Report.vi. Is it possible to create an image of the tabs in order to append to my report?
I'm using LabVIEW 7.1 on windows 2000
Thanks for any help. It would be greately appreciated.
Eduardo

Hello Eduardo,
In order to accomplish this, you'll need to use the Append Control Image to Report VI in a loop. On each iteration of the loop, programmatically change the Tab Control page (with a local variable or the Value property), then append the tab control image to the report. That way you'll have N images in the report, where N is the number of pages in your tab control.
Hope this helps,
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

How to stream live on front panel by given browser url

Similar Messages

Maybe you are looking for