How can I use multiple front panel controls to be mirrors of each other?

Hi All:
I know this is going to be a strange question, but I have multiple inputs that control one output. This in itself not necessarily difficult, but I have a strange need. If one of the control inputs change I would like this to be indicated by the other controls. For example, I have a slider, numeric and dial controls on the front panel that control RPM. If the slider changes to 1000 RPM I would like the numeric and dial controls to see that change. Is this possible. If so, can you give me advice on doing this. I am using 7.1. Thanks for the help.
John Honnold

What you want is not that hard, but asked for a rather limited times.
Here's a how to:
Drop a slider
Right click Visible items-> Digital display
Right click on the slider Advanced-> Customize
Right click on the Digital display Replace select the control you want to replace it with (a gauge for instance)
Right click on the Gauge Visible items -> Digital Display
Now you have one control with three control options:
This was done in 8.2 but I think the same goes for 7.1
Ton
Message Edited by TonP on 04-06-2009 09:52 AM
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!
Attachments:
Example_VI.png ‏7 KB

Similar Messages

How can I create multiple front panels for a single block diagram?

Hello,
I have developed a VI with multiple controls and indicators that needs to run on computers with screen resolutions ranging from 800x600 to 1680x1050. The problem I'm having is that the front panel does not properly scale for this range of resolutions by checking the options in the "VI properties" option. Is there a way to create multiple front panels of various sizes for my block diagram and programmatically select the appropriate front panel based on the screen resolution?
Solved!
Go to Solution.

See the attached Zip file.
I have two different front panels. Open either one and run it. They both call MainCode.vi which takes the references passed to it and register for events. From there, it does all the work of the code you would have put in your front panel .vi.
This way each front panel can be laid out however you want for each screen resolution.
Attachments:
MainCode.zip ‏22 KB

How can I use multiple row insert or update into DB in JSP?

Hi all,
pls help for my question.
"How can I use multiple rows insert or update into DB in JSP?"
I mean I will insert or update the multiple records like grid component. All the data I enter will go into the DB.
With thanks,

That isn't true. Different SQL databases have
different capabilities and use different syntax, That's true - every database has its own quirks and extensions. No disagreement there. But they all follow ANSI SQL for CRUD operations. Since the OP said they wanted to do INSERTs and UPDATEs in batches, I assumed that ANSI SQL was sufficient.
I'd argue that it's best to use ANSI SQL as much as possible, especially if you want your JDBC code to be portable between databases.
and there are also a lot of different ways of talking to
SQL databases that are possible in JSP, from using
plain old java.sql.* in scriptlets to using the
jstlsql taglib. I've done maintenance on both, and
they are as different as night and day.Right, because you don't maintain JSP and Java classes the same way. No news there. Both java.sql and JSTL sql taglib are both based on SQL and JDBC. Same difference, except that one uses tags and the other doesn't. Both are Java JDBC code in the end.
Well, sure. As long as you only want to update rows
with the same value in column 2. I had the impression
he wanted to update a whole table. If he only meant
update all rows with the same value in a given column
with the same value, that's trivial. All updates do
that. But as far as I know there's know way to update
more than one row where the values are different.I used this as an example to demonstrate that it's possible to UPDATE more than one row at a time. If I have 1,000 rows, and each one is a separate UPDATE statement that's unique from all the others, I guess I'd have to write 1,000 UPDATE statements. It's possible to have them all either succeed or fail as a single unit of work. I'm pointing out transaction, because they weren't coming up in the discussion.
Unless you're using MySQL, for instance. I only have
experience with MySQL and M$ SQL Server, so I don't
know what PostgreSQL, Oracle, Sybase, DB2 and all the
rest are capable of, but I know for sure that MySQL
can insert multiple rows while SQL Server can't (or at
least I've never seen the syntax for doing it if it
does).Right, but this syntax seems to be specific to MySQL The moment you use it, you're locked into MySQL. There are other ways to accomplish the same thing with ANSI SQL.
Don't assume that all SQL databases are the same.
They're not, and it can really screw you up badly if
you assume you can deploy a project you've developed
with one database in an environment where you have to
use a different one. Even different versions of the
same database can have huge differences. I recommend
you get a copy of the O'Reilly book, SQL in a
Nutshell. It covers the most common DBMSes and does a
good job of pointing out the differences.Yes, I understand that.
It's funny that you're telling me not to assume that all SQL databases are the same. You're the one who's proposing that the OP use a MySQL-specific extension.
I haven't looked at the MySQL docs to find out how the syntax you're suggesting works. What if one value set INSERT succeeds and the next one fails? Does MySQL roll back the successful INSERT? Is the unit of work under the JDBC driver's control with autoCommit?
The OP is free to follow your suggestion. I'm pointing out that there are transactions for units of work and ANSI SQL ways to accomplish the same thing.

How Can I Use Multiple Weblogic Instances in a Single OS

Hello Everyone,
Actually I have to install Some different applications. Few of them need weblogic 10.3.6 and others need 10.3.4. The OS am using is Oracle Enterprise Linux 5.
Now I am able to install 2 separate(One of 10.3.4 and 10.3.6) instances with two different users,In two different directories.
I have installed the weblogic 10.3.6 version with a user webadmin and installed node manager with port 5556. This is working fine.
The main problem here is :
In the second instance (10.3.4 ) installed with a a different user and gave the port number to NodeManager as 1600 and its not getting started. Its throwing error and also after some errors in the terminal am able to see that its reverting to port number 5556 only.
What might be the issue?
I have to install 2 different versions of weblogic in a single Server. But am failing with NodeManager. What Can I do to have multiple weblogic instances with multiple versions in a single server ?
Can anyone suggest a resolution for this please ?
Thanks in advance.

Pl do not spam these forums with multiple posts - How Can I Use Multiple Weblogic Instances in a Single OS

How to make the LV front panel controls the current value through the program is set as the default value when the next time you open?

How to make the LV front panel controls the current value through the programis set as the default value when the next time you open?
1110340051

Try this: Re: How to make a VI remember the latest control value?
Jim
You're entirely bonkers. But I'll tell you a secret. All the best people are. ~ Alice

How can we use multiple transactions by using bdc_insert.

HI
How can we use multiple transactions by using bdc_insert.

Hi,
In between the Open and Close we have to use the BDC_INSERT for the Tcodes you have to do.
BDC_OPEN_GROUP
BSD_INSERT
TCODE = tcode1
BDC_INSERT
TCODE = tcode 2
BDC_CLOSE_GROUP
check the SDN for more on this.
Regards
Lekha

How can I buy multiple licenses of Apple software to be insalled in other computeres

How can I buy multiple licenses of Apple software to be insalled in other computeres?
I need to buy 20Final Cut, 20 Motion and 20 Compresso

Not so fast there.
The requirement of 20 copies sounds like business, not personal use. The terms and conditions are different for businesses. You cannot buy one copy and have 20 employees (or 20 students if this is for a class being taught) using it on 20 different computers.
MAC APP STORE PRODUCT USAGE RULES
Except as otherwise set forth herein,
If you are an individual acting in your personal capacity, you may download and use an application from the Mac App Store (“Mac App Store Product”) for personal, non-commercial use on any Apple-branded products running Mac OS X (“Mac Computer”) that you own or control.
(ii) If you are a commercial enterprise or educational institution, you may download a Mac App Store Product for use by either (a) a single individual on each of the Mac Computer(s) used by that individual that you own or control or (b) multiple individuals on a single shared Mac Computer that you own or control. For example, a single employee may use a Mac App Store Product on both the employee’s desktop Mac Computer and laptop Mac Computer, or multiple students may serially use a Mac App Store Product on a single Mac Computer located at a resource center or library. For the sake of clarity, each Mac Computer used serially by multiple users requires a separate license.
(iii) Use may require sign-in with the Apple ID used to download the Mac App Store Product from the Mac App Store. Mac App Store Products can be updated through the Mac App Store only.

How can I display the front panel of the dinamically loaded VI on the cliente computer, the VI dinamically loaded contains files, I want to see the files that the server machine has, in the client machine

I can successfully view and control a VI remotly. However, the remote VI dinamically loads another VI, this VI loaded dinamically is a VI that allows open others VIs, I want to see the files that contains the server machine, in the client machine, but the front panel of the dinamic VI appears only on the server and not on the client, How can I display the fron panel with the files of the server machine of the dinamically loaded VI on the client computer?
Attachments:
micliente.llb ‏183 KB
miservidor.llb ‏186 KB
rdsubvis.llb ‏214 KB

I down loaded your files but could use some instructions on what needs run.
It seems that you are so close yet so far. You need to get the data on the server machine over to the client. I generally do this by doing a call by reference (on the client machine) of a VI that is served by the server. THe VI that executes on the server should pass the data you want to diplay via one of its output terminals. You can simply wire from this terminal (back on the client again) to an indicator of your choosing.
Now theorectically, I do not think that there is anything that prevents use from getting the control refnum of the actual indicator (on the server) of the indicator that has the data, and read its "Value" using a property node. I have never tried this idea but it seems t
hat all of the parts are there. You will need to know the name of the VI that holds the data as well as the indicator's name. You will also have to serve all VI's. This is not a good idea.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How can i use multiple row subquery in update statement

Hai All
I using group function in my update statement.. and i need to update more rows so i need to use multiple row
subquery pls tell me how to use multiple row subquery in update statement
For example
while i am using this like this i got an error
update dail_att set outtime in (select max(r2.ptime) from temp_att where empcode=r2.enpno and
barcode=r2.cardn and attend_date=r2.pdate group by enpno,pdate,cardn);
Pls tell me how to use with example
Thanks & regards
Srikkanth.M

Hai Man
Thanks for ur response Let me clear what i need
First step Fetch the records as text file and stores into table T1
and the next step is i have seperated the text using substring and stores in different columns of a table
There are two shifts 0815 to 1645 and 1200 and 2000
Here I rep IN and O rep OUT
Empno date time inout
001 01-01-10 0815 I
002 01-01-10 0815 I
003 01-01-10 0818 I
001 01-01-10 1100 0
001 01-01-10 1130 I
002 01-01-10 1145 0
002 01-01-10 1215 I
004 01-01-10 1200 I
005 01-01-10 1215 I
004 01-01-10 1315 O
004 01-01-10 1345 I
001 01-01-10 1645 0
002 01-01-10 1715 0
003 01-01-10 1718 0
004 01-01-10 2010 0
005 01-01-10 2015 0
This is my T1 table i have taken data from text file and stored in this table from this table i need to move data to another table T2
T2 contains like this
Empno Intime Intrin Introut Outtime Date
001 0815 1100 1130 1645 01-01-10
002 0815 1145 1215 1715 01-01-10
003 0818 1718 01-01-10
004 1200 1315 1345 2010 01-01-10
005 1215 2015 01-01-10
This what i am trying to do man but i have little bit problems Pls give some solution with good example
And my coding is
declare
     emp_code varchar2(25);
in_time varchar2(25);
out_time varchar2(25);
Cursor P1 is
Select REASON,ECODE,READMODE,EMPD,ENPNO,FILL,PDATE,PTIME,INOUT,CARDN,READERN
From temp_att
group by REASON,ECODE,READMODE,EMPD,ENPNO,FILL,PDATE,PTIME,INOUT,CARDN,READERN
ORDER BY enpno,pdate,ptime;
begin
     for r2 in p1 loop
declare
bar_code varchar2(25);
begin
select barcode into bar_code from dail_att where empcode=r2.enpno and attend_date=r2.pdate;
For r3 in (select empcode,empname,barcode,intime,intrin,introut,addin,addout,outtime,attend_date from dail_att)loop
if r2.inout ='O' then
update dail_att set outtime =(select max(r2.ptime) from temp_att where empcode=r2.enpno and barcode=r2.cardn and attend_date=r2.pdate group by r2.cardn,r2.enpno,r2.pdate );
end if;
end loop;
exception
     when no_data_found then
     if r2.inout ='I' then
               insert into dail_att(barcode,empcode,intime,attend_date)(select r2.cardn,r2.enpno,min(r2.ptime),r2.pdate from temp_att group by r2.cardn,r2.enpno,r2.pdate );
     end if;
end;
end loop;
commit;
     end;
Pls tell me what correction i need to do i the update statement i have used a subquery with group function but when i used it will return only one row but my need is to return many rows and i need to use multiple row subquery
and how can i use it in the update statement
Thanks In Advance
Srikkanth.M

Need help badly!! how can i use the front camera i...

guys, i need help with the front camera of my device
how can i enable the front camera of nokia N900 to shoot photos or videos,
this problem is really bugging me...
need help badly...

You can't.. it is terrible..
the only app that really uses it is mirror
Open this link on your phone to install mirror
http://maemo.org/downloads/product/raw/Maemo5/mirror?get_installfile
the camera firmware is bad, so the image quality is truely terrible.. play with mirror to see.. it may be fixed in a future firmware release (it *IS* better than it was.. the firmware last year had a line through the picture!)

TA23485 How can I use multiple identities in Mail?

To be specific: How can I use one email address and different names? I used to do this with Eudora.

MrHoffman: thank you for the answer. You answered to the question: many email addresses and different names, it seems. Please read my question once again and let me know if you have a solution.

How can I use 3 buttons to control the transitions of my case structure?

Hi everyone,
Hopefully this will be an easy fix... Although I cannot seem to work it out??
I am building a state machine inside a while-loop with the following states:
1. System idle.
2. Self-cal pci card.
3. Run DAQ and do my processing.
4. Stop the vi.
I can do this using a enum no problems (with state 1. System idle as the initialising state for the while-loop)... But I really want to have is 4 buttons on the front panel, one for each of the 4 states, so that all the user needs to do is press the button corresponding to the state they want and the appropriate transition ocurrs... For example, when the vi first runs, the idle state is operating... When the user is ready can then hit button 2 for a self-cal... Is self-cal is ok, they hit button 3 for DAQ... Once the DAQ is finished the user can hit button 4 to stop the vi..
My problem is that I need the current button to unlatch when another button is hit...
Any suggestions?... This is killing me!
Thanks,
Jack
Solved!
Go to Solution.

Here's what I had in mind. You can easily add conditions so code only executes once after a control change, for example.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
radiobuttons.vi ‏9 KB

Can a VI create front panel controls?

Hi!
Is it possible for a running VI to create controls on the
front panel? I know how to modify controls but there are
cases where I would like to have variable numbers of
arguments without having to define them beforehand and
fiddling with 'visible' attributes.
Rudolf

Hi Rudolf,
As already mentioned, the is no out of the box solution.
Some of the ideas that I have heard are;
1)Extra controls off-screen, move and make visable when you want.
2)Picture control- make it look like as many buttons/controls as you want, detect mouse clicks, make standard control visable on top of picture to get data, update you picture control. (manage the whole mess in a sub-vi using control refnums.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How can I arrange the front panel?

Hello,
I’m using LV 7.1 and created a VI with many controls and indicators. It writes and reads data to and from a bus system. For that I used the flat sequence structure and many case structures.
Now I would like to order the front panel, i.e. by using the tab control only the data read or only the user settings should be displayed.
But using the tab control slows the whole VI down, so that a data recording in real time is impossible.
Are there any other possibilities to bring the front panel into order if the number of controls and indicators is too high for the screen?
Thanks in advance,
UoS

Do you mean that the CPU usage goes up and the PC responds slowly. If so, this is interesting. This is most likely related to a grphical element causing the system to slow down. The tab control should theoretically take care of this, but about a year ago I ran into a similar situation where a tab caused problem here. In that case it looked like controls that were partially displayed caused the problem and when using the tab control the problem was there even when displaying another page. If this is so, you can try to determine the source by scrolling the screen in different directions. Once the problematic area is moved off the screen the VI should run faster. This way you can tell which area has the problem.
Try to take over the world!

How can I use multiple icloud Accounts with Fotos?

Hello.
Yesterday, my wife and I started using the new App "Fotos" on OSX and iOS.
What I can't figure out, and where I would like to get some insight and help, is how we should use our icloud Accounts.
How it is right now:
- Wife (MacBook and iPhone)
Has her own icloud-Account ([email protected]) for Backup (iOS) and Fotosync, Keychainsync, Bookmarks. 20GB iCloud-Account (18GB free).
- Husband (MacBook, Mac Mini and iPhone and iPad)
Has his own icloud-Account ([email protected]) for Backup (iOS) and Fotosync, Keychainsync, Bookmarks. 20GB iCloud Account (10 GB free).
- Husband has about 400 GB of Photos from over 10 Years on Mac Mini
How I want it to be:
- Husband
upgrades to at least the 500GB Account, to use for all 400GB of Photos and Backup, Keychainsync, Bookmarks.
- Wife
Has her own Account ([email protected]) for Keychain and Bookmark, but uses [email protected] on MacBook and iPhone for Backup an Fotosync, so that all Photos are stored in a single one family "container". All Photos in one Place without being able to forget to put them there.
I don't see, how I can accomplish that, since only one "real" icloud account seems to be possible in iOS, so that if i put my account in her iPhone I would get the Photo and Backup I want, but she would not be able to sync her own bookmarks an keychain any more.
Any thought on how to resolve this?
Am I missing something?
Thanks for your ideas,
thomas

Yes, you could have multiple iCloud accounts for Mail, Contacts, Calendars, Reminders, Safari, Notes, and Find My iPhone, but only one primary iCloud account for Photo Stream, Documents & Data, and Storage & Backup.

How can I use multiple front panel controls to be mirrors of each other?

Similar Messages

Maybe you are looking for