How to subtract % Percentages in Cells by Bulk?

Hey guys,
I need some help with subtracting % (Percentages) from cells in bulk.
For example
In the first column I have my retail price and the second column I have my Price which I would like to enter in the final amount after subtracting for example 20%.
How do I select 300 cells which have the retail price, subtract 20% and have the results show up on the "price column"
Thanks in advance.
Retail Price
Price
$1,000
$800

you can do something like this:
row 1 is a header row
in column A enter the prices
in B2 enter the formula
=A2×0.8
shorthand for this is:
B2=A2×0.8
which means to select cell B2 then type (or copy and paste from here the formula):
=A2×0.8
now select cell B2, copy
select column B (by clicking the B at the very top of the column
unselect cell B1 by holding the command key then single click cell B1
paste

Similar Messages

How to print a specific cell in numbers

how to print a specific cell in numbers?

Copy the cell (contents), Paste onto a page of a separate document, or onto a separate sheet of your Numbers document, Print.
Or insert a single cell table onto your Numbers document, type an = sign in the cell then click on the cell you want to print. Drag the new table to a second sheet, set up your page there, and print.
See the Numbers '09 User Guide for other useful tools and techniques. Download the guide via the Help menu in Nuimbers.
Regards,
Barry

How do I locate another cell phone with my iphone?

how do I locate another cell phone with my iphone?

you can't unless it's an AirPrint enabled printer or you purchase a 3rd party app like printopia.

[Forum FAQ] How to use multiple field terminators in BULK INSERT or BCP command line

Introduction
Some people want to know if we can have multiple field terminators in BULK INSERT or BCP commands, and how to implement multiple field terminators in BULK INSERT or BCP commands.
Solution
For character data fields, optional terminating characters allow you to mark the end of each field in a data file with a field terminator, as well as the end of each row with a row terminator. If a terminator character occurs within the data, it is interpreted
as a terminator, not as data, and the data after that character is interpreted and belongs to the next field or record. I have done a test, if you use BULK INSERT or BCP commands and set the multiple field terminators, you can refer to the following command.
In Windows command line,
bcp <Databasename.schema.tablename> out “<path>” –c –t –r –T
For example, you can export data from the Department table with bcp command and use the comma and colon (,:) as one field terminator.
bcp AdventureWorks.HumanResources.Department out C:\myDepartment.txt -c -t ,: -r \n –T
The txt file as follows:
However, if you want to bcp by using multiple field terminators the same as the following command, which will still use the last terminator defined by default.
bcp AdventureWorks.HumanResources.Department in C:\myDepartment.txt -c -t , -r \n -t: –T
The txt file as follows:
When multiple field terminators means multiple fields, you use the below comma separated format,
column1,,column2,,,column3
In this occasion, you only separate 3 fields (column1, column2 and column3). In fact, after testing, there will be 6 fields here. That is the significance of a field terminator (comma in this case).
Meanwhile, using BULK INSERT to import the data of the data file into the SQL table, if you specify terminator for BULK import, you can only set multiple characters as one terminator in the BULK INSERT statement.
USE <testdatabase>;
GO
BULK INSERT <your table> FROM ‘<Path>’
WITH (
DATAFILETYPE = ' char/native/ widechar /widenative',
FIELDTERMINATOR = ' field_terminator',
For example, using BULK INSERT to import the data of C:\myDepartment.txt data file into the DepartmentTest table, the field terminator (,:) must be declared in the statement.
In SQL Server Management Studio Query Editor:
BULK INSERT AdventureWorks.HumanResources.DepartmentTest FROM ‘C:\myDepartment.txt’
WITH (
DATAFILETYPE = ‘char',
FIELDTERMINATOR = ‘,:’,
The new table contains like as follows:
We could not declare multiple field terminators (, and :) in the Query statement, as the following format, a duplicate error will occur.
In SQL Server Management Studio Query Editor:
BULK INSERT AdventureWorks.HumanResources.DepartmentTest FROM ‘C:\myDepartment.txt’
WITH (
DATAFILETYPE = ‘char',
FIELDTERMINATOR = ‘,’,
FIELDTERMINATOR = ‘:’
However, if you want to use a data file with fewer or more fields, we can implement via setting extra field length to 0 for fewer fields or omitting or skipping more fields during the bulk copy procedure.
More Information
For more information about filed terminators, you can review the following article.
http://technet.microsoft.com/en-us/library/aa196735(v=sql.80).aspx
http://social.technet.microsoft.com/Forums/en-US/d2fa4b1e-3bd4-4379-bc30-389202a99ae2/multiple-field-terminators-in-bulk-insert-or-bcp?forum=sqlgetsta
http://technet.microsoft.com/en-us/library/ms191485.aspx
http://technet.microsoft.com/en-us/library/aa173858(v=sql.80).aspx
http://technet.microsoft.com/en-us/library/aa173842(v=sql.80).aspx
Applies to
SQL Server 2012
SQL Server 2008R2
SQL Server 2005
SQL Server 2000
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Thanks,
Is this a supported scenario, or does it use unsupported features?
For example, can we call exec [ReportServer].dbo.AddEvent @EventType='TimedSubscription', @EventData='b64ce7ec-d598-45cd-bbc2-ea202e0c129d'
in a supported way?
Thanks! Josh

How do I change a cell phone number on my iPad. I have a new cell phone number and want to use the iCloud

How do I change my cell phone number on my iCloud account with my iPad? I have a new number and want to activate the iCloud

If you're talking about the phone number on your iPad for iMessage, the number is associated with the ID when you turn on iMessage on your iPhone. If the number is incorrect, try turning off iMessage on your phone, wait a minute or so, then turn it back on.

How do you add multiple cells to the LARGE function?

I want to add several cells which are contained on different sheets and tables to the same LARGE function and select the first ranking cell value.
How do I add these cells as a single argument for this function?

"...and select the first ranking cell value."
Hi eobet,
If your actual goal is as stated, you could use MAX, which will accept a list, a range, or a list of ranges as arguments.
LARGE accepts only a single argument to establish the set of values, plus a single argument to establish the rank of the desired value. That means you need to collect all of the vlues into a sngle contiguous group/range, then specify that range as the set. The avantage, ofcourse, is that with LARGE, you can specify that you want the 'third largest' value in the set.
Here's an example.
The data set is column B on tables Data 1 and Data 2.
The set is collected into a single contiguous range on the table Aux (which may be hidden, or placed on a separate sheet).
LARGE collects the nth value from the collected set in Aux, using this formula in the table Summary:
A2, and filled down: =LARGE(Aux :: A:B,ROW()-1)
MAX returns the largest value from the original data set on Data 1 and Data 2, using this formula on the table Summary-1:
A2: =MAX(Data 1 :: B,Data 2 :: B)
Regards,
Barry

How do i print selected cells in numbers?

how do i print selected cells in numbers?

As I'm lazy, I use this script and paste where I want.
--{code}
set the clipboard to (the clipboard as «class PDF »)
--{code}
I made a test which gave a funny result.
Given a Numbers document with a chart.
I selected the chart, the title and the legends
then I grouped these objects.
Select all
copy
run the script
I pasted in the sheet to be able to take a screenshot.
It's a bit inconsistent.
Text values are passed when they are in cells
They are passed when they are used as value labels in the chart
but they aren't passed when they are chart's title or legend's components.
Funny behavior, the graphic symbols are moved in the process to the location where they would be if the text components were nil strings.
No comment upon a table's title which can't be selected with the table itself.
Yvan KOENIG (VALLAURIS, France) lundi 3 octobre 2011 14:01:20
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

How to paint a Custom Cell while you are editing on adjacent Cell in JTabl

Hi All,
I have two Columns in my Custom Table . Both Two Columns are Custom Cell Editors/Renderers.
I have made UI such that Column1 is Label , Column 2 is TextBox / Combo/ UI Input any
My Custom Table View when i edit some value against Max Conn. it should display Blue
=================================
Column A | Column B
==================================
Timeout | some_unchanged_value
*{color:#0000ff}Session{color}* | some_unchanged_value
Log File | some_unchanged_value
===================================
My issue is when i start typing in my Custom Editor suppose i Type /invoke Edtir of Index 2, Column 2 font should become Blue.
It becomes blue only when i debug this issue it perfectly works, without Debugger it doesnt changes the Font
MyDefaultRenderer is my Custom renderer - I have set Foregroud Color as BLUE
NOTE:_
In run method if table.repaint() instead of single renderer:
It turns Blue when i make call on table.repaint() methosd but i feel that repainting full table on every key Stroke should not be very good programming. Whats is more appropriate way?
I want to repaint only that particular cell against which i change the Value
    private class MyDefaultEditor extends AbstractCellEditor implements TableCellEditor {
        private JTextField txtField = null;
        private int rowIndex;
        public MyDefaultEditor() {
            txtField = new JTextField();
            txtField.addKeyListener(new KeyAdapter() {
                @Override
                public void keyTyped(KeyEvent e) {
                    super.keyTyped(e);
                    System.out.println("########### Hello This is MyDefaultEditor");
              SwingUtilities.invokeLater(new Runnable() {
                        public void run() {
                              // Call Renderer adjacentt to input to turn Blue (Is this Valid Code ??)
                            MyDefaultRenderer defRen = (MyDefaultRenderer) thisTable.getCellRenderer(activeRowIndex, 0);
                            defRen.paintMe();
          // table.repaint() works for me but i dont want to call it on evey ket type, that will be Heave rite???
        public Component getTableCellEditorComponent(JTable table,
                Object value, boolean isSelected, int row, int column) {
            rowIndex = row;
            String valStr = "";
            if (value != null && value instanceof String) {
                valStr = value.toString();
            txtField.repaint();
            return txtField;
        public Object getCellEditorValue() {
            return txtField.getText();
    }Edited by: Shubhadeep on Jun 27, 2009 1:58 AM
Edited by: Shubhadeep on Jun 27, 2009 2:01 AM
Edited by: Shubhadeep on Jun 27, 2009 2:06 AM
Edited by: Shubhadeep on Jun 27, 2009 2:12 AM

Well, I think you need to add a custom renderer to the first column. The renderer would check if the table.isEditing(). If it is and the editing is done on the same row, then you set the font color blue, otherwise you use the default font color.
Then the next question is how do you repaint the cell. Well you can use the table.repaint(Rectangle) method. You can get the Rectangle to repaint by using the table.getCellRect(...) method.
Finally, you need to know when to repaint the cell. Well a PropertyChangeEvent is fired when a cell starts and stops editing. So you only need to handle these events. Don't use a KeyListener. The PropertyChangeListener you add to the table might be something like:
public void propertyChange(PropertyChangeEvent e)
     if ("tableCellEditor".equals(e.getPropertyName()))
          if (table.isEditing())
               processEditingStarted();
          else
               processEditingStopped();
}So when editing is started you need to determine the "adjacent" cell you want to repaint to the blue font is used. You would save the cell Rectangle so you can restore the font when editing is stopped.

How do I select a cell in a multicolumn list box and use scroll horizontal on th

From an event structure, how do I select a cell in a multicolumn list box and use scroll horizontal on the front panel at the same time. I can select a cell from the multicolumn in an event structure, but I cannot move the scroll bar on the front panel when the program is running.
Solved!
Go to Solution.

I'm assuming you're referring to the scrollbar in the multicolumn listbox. What is your code doing when you select a cell? Can you please post your code so we can see the behavior you're describing? It's possible that you're blocking the event structure, as in performing some long operation in the event that's handling the cell selection. In this case the event structure has to wait until the event completes before being able to respond to the next event. You can configure the event to not lock the front panel while waiting for the event to complete.

How to find out each Cell having Data or Not in Excel File by Using WDJ

Hi Friends,
I have one doubt on WDJ.
I have to Upload Excel File. Click on Upload Button in Excel file Data will move to One Bapi. This is I was done. But my Requirement is if any empty Cell in Excel That File not uploaded it display one error message Please upload Correct Excel File
How to find out each Cell having Data or Not in Excel File by Using WDJ. Please tell me.
By Using this Code I have Upload Excel File
InputStream text = null;
     int temp = 0;
     //wdComponentAPI.getMessageManager().reportSuccess("filePath Vijay:::");
     try
               File file = new File(wdContext.currentContextElement().getResource().getResourceName().toString());
FileOutputStream op = new FileOutputStream(file);
               if (wdContext.currentContextElement().getResource()!= null)
                      text = wdContext.currentContextElement().getResource().read(false);
                         while((temp=text.read())!= -1)
                              op.write(temp);
                              op.flush();
                              op.close();
                              path = file.getAbsolutePath();
                              //wdComponentAPI.getMessageManager().reportSuccess("Path Name :::::"+path);
     catch(Exception ex)
               ex.printStackTrace();
But my Requirement is If excel having any Empty Cell that excel file not uploaded.How to do this...
Regards
Vijay Kalluri

Hi my friend
I would like to share you some APACHE APi´s that i use when i have to read excel files in Web Dynpro.
JAR = poi-3.2-FINAL-20081019.jar
Some Example:
POIFSFileSystem fs;
HSSFWorkbook wb;
HSSFSheet sheet;
String myMexican_ValueFromExcelis = "";
try {
         fs = new POIFSFileSystem(new FileInputStream();
         // and select the cell "y"
        cell = row.getCell( 0 );
        myMexican_ValueFromExcelis = cell.getCellValue();
}cach(Exception e){
REgargds

How to get the selected cell in a Matrix.

Hi all,
Does any one know how to get the selected cell in a Matrix. Please help to answer. Thanks in advance.
Regards,
Thanh Tran

Hi,
You can get the value of every cell using UI API but using datasources is a better aproach.
Using UI API you need to know the event you want to catch. Example: Catching click event in itemcode column and getting the value (C#):Ki
      if ((pVal.EventType == BoEventTypes.et_CLICK) && //CLICK EVENT
          (pVal.ItemUID == "38") &&                                       //MATRIX-> ITEM 38
          (pVal.ColUID == "1") &&                                           //ITEMCODE COLUMN
          (!pVal.InnerEvent) &&
          (!pVal.BeforeAction))
                Form form = null;
                try
                    form = kernel.Application.Forms.Item(pVal.FormUID);
                    form.Freeze(true);
                    Matrix mtx = (form.Items.Item(pVal.ItemUID).Specific as Matrix); //MATRIX OBJECT
                    string itemCode = (mtx.Columns.Item("1").Cells.Item(pVal.Row).Specific as EditText).Value.Trim(); //itemcode = VALUE OF CELL. COLUMN "1": ITEMCODE COLUMN. CURRENT ROW: pVal.Row
                catch (Exception ex)
                    kernel.Application.MessageBox("Error " + ex.Message, 0, "", "", "");
                finally
                     if (form != null)
                        form.Freeze(false);
Kind regards,
Nauzet Díaz

How to get Input-Ready Cell Value of Input Ready Query?

Hi,
How to get input ready cell value in fox formula?
for example :
In Input-Ready Query,
C_Code Month Psale(input ready)
1000 05.2012 800
now i want Psale 800 in fox formua before value save in cube,
is it possible?
Thanks
Ravi

Hi,
as I understand your requirement: you want to execute a planning function before 'save'. This possible, cf. note 1356805
for more details.
Regards,
Gregor

How to subtract a day from the presentation variable @{system.currentTime}

Hello,
How can subtract a day from the presentation variable - @{system.currentTime}
I use the above as a title in the report. However I want to subtract a day from the above variable. How can I accomplish it?
Thanks.

Hi,
Did you try the steps which I mentioned above. You can use TIMESTAMPADD function in many places in your report but I think not in title section of the title view.
Also you can try using Narrative view instead of title view to achieve this. Follow below steos:
* Pull another column in the report and change its fx to TIMESTAMPADD(SQL_TSI_DAY, -1, @{system.currentTime})
* Now go to the Narrative view and add the below text in Narrative section of the view.
Active Person Report as of @1
Here @1 assuming the new column created is placed before all the columns in the request.
* Also set the 'Rows to Display' as 1.
* Delete Title view from the report and this narrative view on top of your report.
Hope this helps.
Thanks

How to programmatically change the cell color of an ADF table ?

Hi all,
I have an ADF table with some fields on it. Depending on the value of a field named, say, "F1", I would like to change its background color.
So far I can change the field color with this EL expression inside the InlineStyle table column property:
font-size:medium; background-color:#{viewScope.myBean.setColor};
where setColor is a bean function, in where I access the field "F1" via binding, parse its value, and return the right value - so far, so good.
The bad thing is, the InlineStyle affects that field in all the rows of the table, while I would like to change only the field in the rows, which have that specific value in it.
So for example having the rows:
F1
abc#1 ----> currently selected row
cde#2
efg#3
I want to change the background color to all the F1 fields which have a "1" after the '#' and let the other "F1" row cells background color stay unchanged.
But as you can imagine, the InlineStyle affect the "F1" background color in all the rows (assuming that the first row of the table is selected).
So the question: how to access a single cell of a row in an ADF table, and programmatically change its background color ?
So far I can iterate through the ADF table with:
BindingContext bindingctx = BindingContext.getCurrent();
BindingContainer bindings = bindingctx.getCurrentBindingsEntry();
DCBindingContainer bindingsImpl = (DCBindingContainer) bindings;
DCIteratorBinding dciter = bindingsImpl.findIteratorBinding("aTableIterator");//access the iterator by its ID value in the PageDef file
RowSetIterator rsi = dciter.getRowSetIterator();
System.out.println("rsi getrowcount = " rsi.getRowCount());+
Row row = null;
+if (rsi.getRowCount() > 0) {+
row = rsi.getCurrentRow();
System.out.println("row attr = " Arrays.toString(row.getAttributeNames()));+
System.out.println("class : " row.getAttribute("F1").getClass().toString());+
+}+
+while (rsi.hasNext()) {+
row = rsi.next();
System.out.println("row attr = " Arrays.toString(row.getAttributeNames()));+
+}+
Regards,
Sergio.

Hi,
I mean a specific cell within a row.
Here are two pictures that show an ADF table with two rows and some fields on it:
https://skydrive.live.com/?cid=7D3084D8BF755808&id=7D3084D8BF755808!107&sc=documents#cid=7D3084D8BF755808&id=7D3084D8BF755808!107&sc=documents
bild_A is what I have, bild_B is what I would like. Note that:
in bild_A the first row contain a yellow background color for the field F4 and an orange background color for the field F5. This is correct, because F4 has an "1" at the end of its string value, and F5 has a "3" at the end. So far so good.
But the second row (again, bild_A) has also the fields F4 with yellow background color, and the field F5 with orange background color, even if the value in both fields is 0.
What is should be, is shown in bild_B.
The problem is that the solution provided affects all the cells of the column, while I need to change the background color of a single cell, and leave the other unchanged (see bild_B).
I hope that clarify a bit :)
Sergio.

How to set percentage size for layout? for example : VBox,HBox,AnchorPane,.

how to set percentage size for layout? for example : VBox,HBox,AnchorPane,......
like HTML
<div width="640px" height="480px">
<div widht="50%" height="60%"/>
<div widht="30%" height="60%"/>
<div widht="20%" height="60%"/>
</div>
-----

This is not supported. You can file a feature request at http://javafx-jira.kenai.com

How to subtract % Percentages in Cells by Bulk?

Similar Messages

Maybe you are looking for