How to Supress the Second Page in Smart form

Hi,
I have First page where there is no Main Window and on the Second page is with Main Window.Now lets say if there is item detais then vlaue will be printed on second page but in case there is no Item details so..the second page should not come only the first page would appear i.e. we need ot supress this second page.
Thanks,
Pramod

Hi
just use the command Describe table ITAB lines v_lines.
so v_lines <> 0 means items Exist.
so use this field in the condition
Define a Text ELEMENT for the MAIN window data
Before that text element put a condition based on the v_lines field.
/: IF V_LINES NE 0.
/E MAIN
/: ENDIF
So when you give print , if no data in internal table it won't print.
Reward points for useful Answers
Regards
Anji

Similar Messages

How to supress a blank page in smart forms

Hi,
I am using a command in Smartforms to trigger a new page whenever a new BELNR(Accounting document). My problem is in the output i am getting a first page is blank and remaining pages are ok.
What i did Is In conditions tab i written as temp NE belnr. So first time temp is nothing so blank page is coming. and in the following text elements i am passing a belnr value to the temp.
Temp = belnr and in general attributes go to new page check box has been activated. Then how to supress a blnk page.
Regards
Ramakrishna .P

Hi,
I am not using loop.
In main window i have the contents as
Header---- Headers for table
Main Area---- text elements ( i have fileds slno, belnr,glaccount,cost center,gtext,description,dmbtr,wrbtr)
In belnr field i have created the command there i am comparing the condition temp ne Belnr and go to new page on conditions tab
wrbtr text element i am passing the g_temp =belnr
My requirement is whenever new belnr comes new page has to trigger and corresponding gl accounts need to be displayed and end of the belnr i want to display the footer.
For your information passing the belnr values from the print program (select options) to smart form
Footer---footer

Epson Artisan 810 in duplex printing, reverses the second page, so that it is upside down in relation to the first page. Does anyone know how to set the second page i.e the reverse side of the page, in the correct direction?in the

Epson Artisan 810 in duplex printing, reverses the second page, so that it is upside down in relation to the first page. Does anyone know how to set the second page.... i.e the reverse side of the page.....in the correct direction?
It worked perfectly last week, now there are problems.
Thanks for any advice.

Epson Artisan 810 in duplex printing, reverses the second page, so that it is upside down in relation to the first page. Does anyone know how to set the second page.... i.e the reverse side of the page.....in the correct direction?
It worked perfectly last week, now there are problems.
Thanks for any advice.

How to get a second page in a form letter report after create it by Wizard

How to get a second page in a form letter report after create it by Wizard
i've built a report by wizard with a sql-Query
the sql give me back for example 3 dataset
and the report prints 3 pages
dataset 1 - page 1
dataset 2 - page 1
dataset 3 - page 1
thats ok,
but now I need a second page per dataset ( with only a text )
so that the report should print 2 pages per dataset
dataset 1 - page 1 ,page 2
dataset 2 - page 1 ,page 2
dataset 3 - page 1 ,page 2
It's not really clear for me, what to do, to create the second page
any help ?

.... found answer in other forum

How to know no of pages in smart forms to be printed ?

Hi,
How to know no of pages in smart forms to be printed ?
though i got SFSY structure during run time of smartform , even that was not useful.
&SFSY-FORMPAGES&
Displays the total number of pages for the currently processed form. This allows you to include texts such as'Page x of y' into your output.
for that Page &SFSY-PAGE& of &SFSY-FORMPAGES&
during debug of smart form i don't understand how it is calculating no of pages ,as i kept break point before printing page no in smart form.
please check my two screen shots, sfsy-formpage still contains current page no only but not total no of pages.
Help Required.
Thanks In advance.

Hi Prakash,
You will not get these values during debugging.. Let the program execute completely, you will get the right values.
As Manish said, the value for &SFSY-FORMPAGES& will be known only after all the pages are processed, though it is not necessary that you use them in the final window only. It can be a text node in a window of any type.
You will get the desired output, just cant see them during debugging within the program. At the time of printing or in the print review, output would be as expected.
Also, FYI, it would be better to give total pages as &SFSY-FORMPAGES(3ZC)& as there can be error if the total number of pages exceeds 9, due to lack of sufficient space to print more digits

How to get the last page SAP Script form

How to get the last page SAP Script form.
I want to print a specific information in the last page of SAP form (Script). Please tell me how to get the last page number.
Regards

Hi
You have to check the system variable &NEXTPAGE&, if it's 0 it means you're in the last page.
From SAP Help:
This symbol is used to print the number of the following page. The output format is the same as with &PAGE& .
Note that on the last page of the output, in each window that is not of type MAIN, &NEXTPAGE& has the value 0.
/: IF &NEXTPAGE& = '0'
Last page
/: ENDIF
Max

How do u get New page in Smart form dynamically

How do u get New page in Smart form dynamically

page break in smart form
Re: New Page in Smart Forms
Page break inside a loop in smart form

How to deal with multiple pages of smart forms

Hi everyone,
i have two pages in smartforms but whenever i show smart form through my program only first page is shown not the second one. i tried with next page attribute of both pages but no resolution.
thanks alot in advance

Which solution did you choose ?
(1) main window on the two pages
- The first page contains the main window, and its next-page attribute is the second page
- The second contains the main windows, and its next-page attribute is itself
- The main windows
- - Begins with nodes to print on first page
- - Then a command node force end-of-page
- - Then some nodes and a table node that are to be printed on second page
(2) main window only on second page
- The first page do not contain the main window, and its next-page attribute is the second page
- The second contains the main windows, and its next-page attribute is itself
- The main windows
- - Some nodes and a table node that are to be printed on second page
Regards,
Raymond

How to control the print pages in se71 form or smartforms

Dear All:
I have a issue for control the print pages in se71 form or smartforms.
For example:my report used form or smartforms to print.it have 12 total pages.but user want to print the .3rd page.3rd page is customized.
How can I do it?
Thanks
Sun

Hi,
By using command node, with some command we can handle this.

Display either ( first and second page ) or only second page on smart form

Hi All,
There is a requirement in which we get Program name and smart form name from table TNAPR.Now the smart form contains 2 pages.We have to check condition in the program and based on the condition we have to Display either ( first and second page ) or only second page of the smart form.
Can any one please tell how to solve this .
Tahnks in advance.

SSFCOMPOP-SPONUMIV-->Number range number
SSFCOMPOP-TDPAGESLCT-->Pages selected for printing
Data: t_out type ssfcompop.
If COndition.
t_out-sponumiv = 'Number Range'.             " 1-2 or 2
ESLE.
t_out-sponumiv = 'Number Range'.
ENDIF.
OR:
If COndition.
t_out-TDPAGESLCT = '2'.        " Else Bot pages will print
ENDIF.
Pass T_out to the function module.
CALL FUNCTION 'FORM'
    EXPORTING
*   ARCHIVE_INDEX              =
*   ARCHIVE_INDEX_TAB          =
*   ARCHIVE_PARAMETERS         =
*   CONTROL_PARAMETERS         =
*   MAIL_APPL_OBJ              =
*   MAIL_RECIPIENT             =
*   MAIL_SENDER                =
OUTPUT_OPTIONS             = t_out
*   USER_SETTINGS              = 'X'.
Regards,
Gurpreet

Issue in printing second page in smart form

in my smart form i have only FIRST page in tht i have pur order numberwindow, date window and all the item details in mainwindow. my problem is in my page 1 order number and date are getting printed at the exact position whre i want but when it is coming to the next page that is page 2 order number and date are going out of scope. I cant even change the position of those two windows as it is getting printed properly on 1st page.

Copy the first page and paste so as to create a second page, now give next page as this second page, and check, if there is any layout issue then make changes in this page, be careful as if you make any any changes, such as deleting some table or template or window in the copied [page it will get deleted in first page to, so only make changes to layout.

Unable to see the next pages in smart form

in my smart form i designed 3 pages...
in the first page i don't want data in main window...but i gave the main window dimensions as in 2nd and 3rd page(same height and width)...
in 2nd and 3rd page i want to display the data in main window...
but when i am trying to see the output i am able to see only the first page ...
Please suggest me the suitable solution..
Thanks in advance

Hi,
You've originally said.
in the first page i don't want data in main window...
yet using a command node to trigger the next page means you have to include a (presumably) empty main window in the first page.
Your main window has to contain some output (a table usually) and it's contents are the same on every page (only it's height can change). So, you can't have a blank main window on page 1 and a main window with data on pages 2 and 3.
Remove the main window from page 1, set page2 as the next page for page 1.
As for how to trigger page 3 you'll need to provide more detail on what the condition is. Do you want multiple copies of page 2 to hold all of the main window data, or just one? Do you want one copy of page 2 then the rest of the data on multiple copies of page 3. Be specific.
Regards,
Nick

How to print the overflow entries in Smart Form

Hi all ,
I am having a problem regarding smart forms . I have 30 entries in may data base table . Bt while I am going to print these data in smart form table it is showing only 16 entries .How to print rest of the entries in smart form ? Can anybody give me any solution .
Thanks,
Regards,
Swashrayee
Edited by: Matt on Feb 20, 2012 10:15 AM

Hi,
Are you sure you are entering the data in the main window .
If you are using the secondary window,there is no flow text display with page break. If you position a subwindow with the same name on several pages, the system displays the contents of this subwindow on each page. Text and data that do not fit into the subwindow are truncated and not displayed.
In a main window you display text and data, which can cover several pages (flow text). As soon
as a main window is completely filled with text and data, the system continues displaying the text
in the main window of the next page. It automatically triggers the page break.

How to make a last page in Smart Forms

Hi,
I'm using 2 pages in my form, the first one (PAGE1) has a main window and prints out a table. The "next page" goes to PAGE1 since i dont know how many results i get.
Then I have a second page (PAGE2) without a main window, that prints out a text-module containing terms & conditions.
The problem is that when i run it, only PAGE1 is displayed.
How can i call PAGE2?

Thank you so much Sasi, that solved it.
I was going nuts about this.
Best regards
BTW: Right now there seem to be no way of rewarding points to you. Those options are missing on my screen.

How to Set the Paper Size in Smart Forms

Hi Friends,
I need to SET the Paper Size to default A4 in a smart form...and in some other case we need to set to other type 8.5 X 11...How can i set it....?

Moving this discussion to the Scanning & OCR forum.

How to Supress the Second Page in Smart form

Similar Messages

Maybe you are looking for